Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

WATER QUALITY ANALYSIS

Active
SPE4A5-27-T-2348Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUSA

Full Description

Show more
WATER QUALITY ANALYSIS SET
WATER QUALITY ANALY,,
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
CRITICAL APPLICATION ITEM
PARKER HANNIFIN CORPORATION 62144 P/N 61012050
SPE4A5-27-T-2348
SECTION B
PR: 7019014076 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019014076 0001 KT 2.000
NSN/MATERIAL:6630016902431
DELIVERY (IN DAYS):0209
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO contact@example.gov. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
SPE4A5-27-T-2348
SECTION B
PR: 7019014076 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:06/10/2027 Original Required Delivery Date:06/10/2027
SPE4A5-27-T-2348 NSN/Part Number: 6630-01-690-2431 Quantity: 2 KT Purchase Request: 7019014076QTY: 2 Delivery: 209 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334515
New
Federal
Peak Power Analyzer, Peak Power Sensors, and Power Sensor Cables
Solicitation # N6833527R1006
The Naval Air Systems Command (NAVAIR) Warfare Center Aircraft Division is soliciting proposals for a three-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract to modernize equipment for the Metrology and Calibration (METCAL) Program. The procurement covers Peak Power Analyzers, Peak Power Sensors, and Power Sensor Cables, with quantities ranging from a minimum of 3 to a maximum of 100 analyzers, and minimums of 6 to maximums of 200 for both sensors and cables. All hardware must comply with Calibration Standards Specification (CSS) 01-3244 and ANSI/ISA S82.02.01-1999 safety standards. The contract period of performance runs from February 26, 2027, to February 25, 2030, and utilizes firm-fixed-price pricing for CLINs 0001 through 0012. Key deliverables include the primary hardware, support equipment for maintenance and calibration, training at two government sites, and several Contract Data Requirements List (CDRL) items, including COTS manuals and supply chain management data. Proposals will be evaluated based on the lowest evaluated price among offerors rated as acceptable in both technical compliance and past performance, with the latter verified via the Supplier Performance Risk System (SPRS). The contract mandates strict adherence to MIL-STD-130N for item unique identification and MIL-STD-129 for shipment labeling. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system, with inspection occurring at the destination in Beaufort, South Carolina, and final acceptance at Joint Base MDL, New Jersey.
Navair Warfare Ctr Aircraft Division

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334515
New
Federal
6515--Wechsler Memory Scale
Solicitation # 36C24827Q0096
The Department of Veterans Affairs, Network Contracting Office 8, is issuing a Sources Sought Notice to conduct market research for the procurement of the Wechsler Memory Scale Fifth Edition (WMS-5) for the Orlando VA Medical Center. This notice is not a solicitation or request for quote and does not obligate the government to award a contract. The requirement is for a comprehensive adult memory assessment kit designed for individuals aged 16 to 90, featuring updated normative data representative of the contemporary U.S. population. The system must support both paper and digital administration and scoring, provide standardized index scores for auditory, visual, and working memory, and maintain compatibility with contemporary Wechsler Adult Intelligence Scale (WAIS) instruments. Interested contractors must submit a capability statement of no more than five pages to Contract Specialist Carl Myers by 1:00 PM EST on November 12, 2026. Submissions must include company identification, CAGE and SAM UEI numbers, business size, and socioeconomic status. The government is utilizing NAICS code 334515 with a size standard of 1,000 employees. Specifically, SDVOSB and VOSB respondents must demonstrate the ability to provide a product manufactured by a small business to be considered capable. The capability statement should highlight the firm's industry experience in providing the WMS-5 or similar scope and scale to ensure delivery requirements are met.
248-NETWORK Contract Office 8 (36C248)

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334515
New
International
Fast and High-resolution Oscilloscope
Solicitation # 26-58164
The National Research Council Canada is soliciting proposals for the purchase of a new, current-production, real-time mixed-signal oscilloscope to be used in a pulsed-mode measurement set-up for characterizing quantum cascade lasers at cryogenic temperatures. The required equipment must feature at least four simultaneously operational analog input channels with 50 ohm input termination, DC coupling, a minimum analog bandwidth of 4 GHz, and a native hardware ADC resolution of at least 12 bits. A critical technical requirement is a maximum real-time sample rate of at least 25 GS/s across all four channels simultaneously to accurately capture short pulses and fast transient features. The contract will be awarded to the compliant offeror with the lowest evaluated fixed price, based on a Delivered At Place (DAP) Incoterms 2020 basis to Ottawa, Ontario. All deliverables must be received by March 31, 2027, with the contract term extending to one year after delivery and acceptance. Proposals must be submitted electronically by November 13, 2026, and must include a technical offer, a financial offer, and the required submission and declaration forms. Additionally, the successful contractor must adhere to mandatory environmentally preferable packaging requirements and ensure all electrical equipment is certified according to the Canadian Electrical Code.
National Research Council of Canada

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 334515
New
OSCILLOSCOPE — 6625016998231 — SPRMM127QKA63
Solicitation # SPRMM127QKA63
Solicitation SPRMM1-27-Q-KA63, issued by DLA Mechanicsburg under Emergency Acquisition authority, seeks the manufacture and supply of an oscilloscope (NIIN 016998231) based on the design from Cage Code 80009, reference number MDO32. The requirement is categorized under NAICS code 334412 with a size standard of 750 employees. This is a DO rated order for national defense, requiring the contractor to provide new, unused material. Refurbished items are strictly prohibited. If the offeror is not the original equipment manufacturer, they must provide the OEM's CAGE code and part number, and authorized distributors must provide proof of authorization on company letterhead. The contract mandates strict quality and packaging standards, including physical identification per MIL-STD-130 and packaging according to MIL-STD-2073-1. Inspection and acceptance are conducted at the origin. All invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. Compliance requirements include CMMC Level 1 self-certification and adherence to cybersecurity standards for safeguarding covered defense information. Offerors must submit quotes via EDI or other electronic methods by the December 4, 2026, deadline, ensuring all technical exceptions are clearly specified to avoid award based solely on solicitation requirements.
SPRMM1 DLA Mechanicsburg

POSTED

1 day ago

DEADLINE

in 29 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS