Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Unmounted Magnetic Compasses

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense through DLA Distribution San Joaquin, requires the procurement of 674 unmounted magnetic compasses under NSN 6605-00-171-5121. The supplier must ensure all units conform to producer drawings and quality standards, with specific requirements for marking according to MIL-STD-129 and packaging per MIL-STD-2073-1E. The project is designated as a Total Small Business Set-Aside under NAICS code 334515. Compliance with the Buy American Act is mandatory, requiring certification that the end products are domestic or from a qualifying country. The final deliverable consists of 674 packaged magnetic compasses to be used by prime contractors on DLA Troop Support Construction and Equipment projects. Performance is centered in the 95304-5000 zip code area.

General Info

DoD subcontract for 674 magnetic compasses, small business set-aside, Buy American Act compliant.

Agency

Department Of Defense → DLA DIST SAN JOAQUIN

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

Place of Performance

CA, 95304-5000, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE8E5-27-Q-0047.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COMPASS, MAGNETIC, UNMOU

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies unmounted magnetic compasses for prime contractors on DLA Troop Support Construction & Equipment projects. Sources 674 units of NSN 6605-00-171-5121 conforming to producer drawings and quality standards. Performs marking per MIL-STD-129 and packaging per MIL-STD-2073-1E. Requires Buy American Act compliance and certification of domestic or qualifying country end products. Delivers 674 packaged magnetic compasses.

Similar Contracts

Same NAICS industry code

Metrology Grade Oscilloscope Hardware SupplierThis subcontract, managed by the Department of Defense for the FA2263 Aflcmc Romk Afmetcal agency, seeks a hardware supplier to provide metrology grade oscilloscopes for prime contractors working on Air Force Metrology and Calibration program office projects. The required equipment must feature a bandwidth between 1.5 and 2 GHz, a sample rate of 5 to 10 GS/s, and 12-bit native resolution. Each unit must be equipped with a 10-inch multi-touch display and support connectivity via GPIB, LXI Core Ethernet, and USB 3.0. The supplier is responsible for delivering the oscilloscope unit along with a certificate of calibration. This calibration must be performed by an ISO/IEC 17025 accredited facility and be traceable to either NIST or AFPSL. The opportunity is categorized under NAICS code 334515, with a response deadline set for December 3, 2027.

FA2263 Aflcmc Romk Afmetcal

POSTED

about 11 hours ago

DEADLINE

in about 1 year

Solicitation # N00104-27-Q-BC21

Solicitation N00104-27-Q-BC21 is a small business set-aside request for the procurement of 16 KOH Cartridges (NSN 6625-01-654-4047) for the Department of Defense, specifically Navsup Weapon Systems Support Mech in Mechanicsburg, Pennsylvania. The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference applied to non-small business and non-HUBZone concerns. Delivery is required within 120 days on an FOB Destination basis. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1 for preservation and MIL-STD-129 for marking. Specific requirements include providing items with at least 85 percent of their 24-month shelf life remaining and submitting Safety Data Sheets and GHS labels prior to award. Inspection and acceptance will occur at the origin or the contractor's plant. Invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors must submit completed Standard Form 33, the schedule of supplies, and manufacturer CAGE and part numbers to the primary point of contact, Breanne Clippinger, by the December 3, 2026, deadline.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

F-35 GAU-22 and F/A-18 M61 Range Data Acquisition System

Solicitation # N00174-26-RFPREQ-W72-0007

Nswc Indian Head Division

POSTED

about 11 hours ago

DEADLINE

Metrology Grade Oscilloscope

Solicitation # 26E-187A-RF

The Air Force Metrology and Calibration (AFMETCAL) program office is conducting market research through a Sources Sought synopsis to identify potential providers for 131 highly accurate, standardized metrology-grade oscilloscopes over four years. The objective is to replace aging equipment and establish a consistent technical baseline across all Precision Measurement Equipment Laboratories (PMELs), which will streamline training, simplify Technical Order authoring, and ensure identical bench setups across the enterprise. This request is for planning purposes only and is not a solicitation for proposals. Technical requirements for the hardware include a bandwidth of 1.5 to 2 GHz, a sample rate of 5-10 GS/s, and a native resolution of at least 12-bit, with 16-bit in high-res mode. The preferred unit size is 15 by 8 by 6 inches with a minimum 10-inch high-resolution multi-touch display. Connectivity must include native GPIB, LXI Core compliant Ethernet, and USB 3.0. Each unit must be delivered with an ISO/IEC 17025 accredited Certificate of Calibration traceable to NIST or AFPSL. Support requirements include a minimum three-year warranty and guaranteed spare parts availability for at least seven years. Interested vendors, including both large and small businesses under NAICS code 334515, must submit a capability statement and rough order of magnitude pricing. Submissions should include company details, sales history, and technical specifications of the offered product. Responses are due by December 3, 2026, at 2:00 pm ET and should be directed to the listed contract specialists. Reconditioned or used materials are strictly prohibited.

FA2263 Aflcmc Romk Afmetcal

POSTED

about 11 hours ago

DEADLINE

in about 1 year

FMS LMR-16 DAQ — 9999LLTRL5645 — SPRMM127QKA67

Solicitation # SPRMM127QKA67

Solicitation SPRMM1-27-Q-KA67, issued by the Department of the Navy via DLA Mechanicsburg, seeks the manufacture and delivery of two units of the FMS LMR-16 DAQ (NIIN: LLTRL5645). The items must conform to the design represented by Cage Code 03538, reference number 352377-1. Delivery is required as soon as possible on a FOB Destination basis. The procurement is conducted under FAR Part 12 for commercial products, and award will be made to the responsible offeror submitting the lowest priced, technically acceptable offer. Technical acceptability is based on compliance with solicitation instructions and the absence of exceptions to the terms. The government will utilize the Supplier Performance Risk System (SPRS) to evaluate item, price, and supplier risk, and specifically prohibits the use of additive manufacturing for these items. The contractor is responsible for all inspection and quality assurance at the point of origin, maintaining records for 365 days following final delivery. Physical identification and marking must comply with MIL-STD-129, and packaging must adhere to MIL-STD-2073, including specific requirements for palletization and shelf-life markings. Configuration control is governed by MIL-STD-973, and any design or part number changes require written approval from the NAVICP-MECH Contracting Officer, except for simple part number changes. Invoicing and receiving reports must be submitted electronically through PIEE-WAWF. The contract incorporates various federal and defense clauses, including the Buy American Act, safeguarding of covered defense information, and requirements for SAM registration.

SPRMM1 DLA Mechanicsburg

POSTED

about 18 hours ago

DEADLINE

Supply of Physical Properties Reference Standard (NSN 6635-01-609-4427)This subcontract involves the supply of a Physical Properties Reference Standard, specifically hardware identified by NSN 6635-01-609-4427, to support prime contractors delivering DLA Weapons Support ASC contracts. The scope of work requires the delivery of one unit that adheres to strict military quality standards, including packaging performed according to RP001 DLA requirements and sampling methods implemented per MIL-STD-1916 or ASQ H1331 Table 1. Managed by the Defense Logistics Agency under the Department of Defense, the contract falls under NAICS code 334515. The solicitation was posted on November 2, 2026, with a response deadline of November 10, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Stratus Systems Control-ModulesThis subcontract involves the procurement of 106 Control-Module hardware units, specifically part number 01-0-15-100-1FL, from Stratus Systems, Inc. to support prime contractors for the DLA Weapons Support Maritime Supply Chain. The scope of work requires the delivery of inspected and verified modules that strictly adhere to Bare Item Marking and Configuration Change Management standards. The agreement mandates compliance with the Buy American Act and requires a CMMC Level 2 self-assessment. Operating under NAICS code 334515, the project is managed by the Department of Defense and requires all deliverables to meet specific technical and regulatory specifications before final acceptance.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

DIAGNOSTIC UNIT, ENGINE

Solicitation # SPE4A5-27-T-2190

Solicitation SPE4A5-27-T-2190 is a fixed-price requirement issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of 11 engine diagnostic unit kits, identified by NSN 6620-01-696-6940. The contract specifies a required delivery date of May 26, 2027, with shipment destined for the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is designated as a total small business set-aside under FAR 19.5, and offers must be submitted based on FOB Origin. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with specific sampling methods adhering to MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1 Appendix D for kits, requiring all components to be housed in a single cushioned box with a detailed contents list. Marking must follow MIL-STD-129, and the use of mercury or mercury-containing compounds is strictly prohibited in preservation and packaging. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-27-U-1111

Solicitation SPE7M1-27-U-1111 is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of Control-Module units, identified by NSN 5999016245931. The requirement is for an estimated quantity of 106 units with a contract maximum value of 350,000.00 USD and a guaranteed minimum of 15 units upon award. This is a unilateral Indefinite Delivery Contract (IDC) with delivery expected within 106 days after receipt of order, shipped FOB Origin, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA Master List Technical and Quality Requirements, which take precedence over ASTM D3951 commercial packaging standards. Specific requirements include MIL-STD-129 for marking and labeling, RP001 for palletization, and CMMC Level 2 Self-Assessment for cybersecurity. Additionally, the contractor must comply with the Buy American Act and use the Wide Area WorkFlow system for electronic invoicing and payment. Quotations must be submitted via the DLA Internet Bid Board System by November 17, 2026, and will be evaluated based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

METER, SPECIAL SCALE

Solicitation # SPRAL1-27-Q-0008

Solicitation SPRAL1-27-Q-0008 is a total small business set-aside request for quotations issued by DLA Land and Maritime (Albany) for the procurement of two special scale meters, NSN 6625-01-624-3442. The approved source of supply is Trimble Inc. with part number 100019-00-FED. This is a firm fixed price acquisition with a required delivery date of 90 days after order. Delivery is designated as FOB Origin, with inspection and acceptance occurring at the destination. The items must be delivered to DLA Distribution Albany in Georgia, with mandatory delivery appointments and adherence to specific receiving hours. The contractor must follow ASTM-D3951 commercial packaging standards, ensuring all containers meet ASTM D4169 and that unitization complies with MIL-STD-147. Marking must adhere to MIL-STD-129, including the requirement for a Transportation Control Number on Military Shipment Labels. Award will be based on best value, evaluating price, past performance, and offered delivery. Notably, any proposal requesting origin inspection will incur a 2,500 price evaluation penalty. Administrative requirements include electronic invoicing via Wide Area WorkFlow and strict compliance with DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

VDATS Astronics Repair BPA

Solicitation # FA857927Q

This is a sole source Blanket Purchase Agreement solicitation issued by the Department of Defense, specifically through the Software Support AFSC PZIM office located at Robins Air Force Base in Georgia. The contract, identified by solicitation number FA857927Q, is designated for VDATS Astronics repair services. The agreement is awarded directly to the original equipment manufacturer, Astronics Test Systems Inc, based in Irvine, California. Because the required equipment, data, and information are proprietary to the OEM, no other offers are being solicited for this requirement. The performance of the contract is expected to take place in Warner Robins, Georgia, under NAICS code 334515.

FA8579 Software Sprt Afsc Pzim

POSTED

DEADLINE

Peak Power Analyzer, Peak Power Sensors, and Power Sensor Cables

Solicitation # N6833527R1006

The Naval Air Systems Command (NAVAIR) Warfare Center Aircraft Division is soliciting proposals for a three-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract to modernize equipment for the Metrology and Calibration (METCAL) Program. The procurement covers Peak Power Analyzers, Peak Power Sensors, and Power Sensor Cables, with quantities ranging from a minimum of 3 analyzers and 6 sensors/cables to a maximum of 100 analyzers and 200 sensors/cables. All hardware must adhere to the technical and performance requirements defined in Calibration Standards Specification (CSS) 01-3244 and safety standard ANSI/ISA S82.02.01-1999. The period of performance is scheduled from February 26, 2027, to February 25, 2030, with firm-fixed-price pricing arrangements. Beyond hardware delivery, the contractor is required to provide at least one day of training for up to ten people at government sites in Patuxent River, Maryland, and Seal Beach, California. Key deliverables include COTS manuals, calibration certifications, OEM calibration procedures, and software version descriptions. Proposals will be evaluated based on technical understanding, past performance via the Supplier Performance Risk System (SPRS), and price, with the award intended for the responsible offeror with the lowest evaluated price rated acceptable in technical and past performance categories. Submissions are due by November 19, 2026, and must be processed through the Wide Area WorkFlow (WAWF) system for invoicing.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

Supply of Steel Comp XM-13 Round BarsThis subcontract, managed by the Department of Defense through DLA DIST SAN JOAQUIN, requires the supply of 26 linear feet of centerless ground round metal bars manufactured from STEEL COMP XM-13. The bars must have a diameter of 2.250 inches and be provided in whole foot lengths of 10, 11, or 12 feet. All materials must strictly adhere to NSN 9510004867745 specifications and comply with DFARS 252.225-7001 Buy American standards. The performance of this contract will take place in Tracy, California. It is important to note that additive manufacturing is prohibited unless explicit approval is granted by the ESA. Interested parties should note the response deadline of November 16, 2026, for this procurement under NAICS code 331221.

Rolled Steel Shape Manufacturing

POSTED

about 6 hours ago

DEADLINE

Heavy Steel Plate Transportation (FOB Origin)This subcontract, issued by the Department of Defense via DLA Dist San Joaquin, involves the transportation of heavy steel plates for prime contractors supporting DLA supply contracts. The scope of work requires the loading, securing, and transport of 50 steel plates, each measuring 240 inches in length, with a combined total weight of approximately 102,100 lbs. The project necessitates the use of flatbed trailers and heavy-duty industrial rigging, and the carrier must maintain standard DOT commercial hauling certifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 484220. All materials must be delivered to the designated inspection point within 30 days after the order is placed. Performance will take place in the 95304-5000 zip code area.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 6 hours ago

DEADLINE

in about 18 hours

Grade DH36 Normalized Steel Plate ProductionThis subcontract, managed by the DLA Dist San Joaquin for the Department of Defense, involves the production and delivery of 50 pieces of Grade DH36 normalized structural steel plate. The material must be rolled and normalized to specific dimensions of 0.500 inches in thickness, 60 inches in width, and 240 inches in length. All production must strictly adhere to MIL-S-22698 standards and American Bureau of Shipping rules, including the application of continuous identification markings. To ensure quality and compliance, the contractor must utilize an approved mill and provide material certificates endorsed by an ABS Surveyor. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 331110. The final delivery requires the submission of all necessary certifications alongside the physical steel plates.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 18 hours

Supply of Hand Files (NSN 5110-00-242-5386)This subcontract, issued by the DLA DIST SAN JOAQUIN under the Department of Defense, requires the supply of 12,000 units of hand files for prime contractors. The contractor is responsible for manufacturing or sourcing files that strictly conform to Basic Drawing NR 14153 NFES1059-IPD-002425386. Key technical requirements include ensuring that cutting surfaces are hardened to a uniform level and remain free from decarburization, with each item clearly marked with its country of origin through etching or engraving. The contract is designated as a Total Small Business Set-Aside under NAICS code 332322 and mandates full compliance with the Buy American Act and DFARS 252.225-7059. Performance will take place in the 95304-5000 zip code area. Interested parties must have responded by the deadline of November 9, 2026, to provide the required 1,000 dozen hand files.

Sheet Metal Work Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0216

This solicitation, issued by DLA Troop Support Construction and Equipment (Metals), is for the procurement of 26 feet of centerless ground round metal bar made of Steel Comp XM-13. The material must have a diameter of 2.250 inches and be supplied in whole feet lengths between 10 and 12 feet. Adherence to technical standards SAE AMS5629 Revision K and SAE AMS2806 Revision D is required. The delivery is set for FOB Origin with a required delivery date of March 29, 2027, and a need ship date of April 26, 2027, shipping to DLA Distribution San Joaquin in Tracy, California. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) or Manufacturers (QSLM). Critical quality requirements include the provision of a Mill-Material Certification (Certificate of Quality Compliance) with every shipment and strict adherence to continuous identification marking requirements; failure to provide the specified markings, including the contract delivery order number, NSN, and manufacturer details, will result in product rejection. Packaging must comply with MIL-STD-2073-1E and RP001, with specific marking standards governed by MIL-STD-129. The contract also incorporates standard FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and the prohibition of covered defense telecommunications equipment.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 6 hours ago

DEADLINE

COMPASS, MAGNETIC, UNMOU

Solicitation # SPE8E5-27-Q-0047

Solicitation SPE8E5-27-Q-0047 is a fixed-price requirement issued by the DLA Troop Support Construction and Equipment office for the procurement of 674 general-purpose magnetic compasses (NSN 6605-00-171-5121). The compasses must adhere to United States Department of Agriculture Forest Service specifications, featuring a base plate with a hinged cover, a liquid-filled clear acrylic or polycarbonate capsule, and a stabilized magnetic steel needle. Key technical requirements include the ability to adjust for east and west declination without tools and the inclusion of a lanyard at least 35 inches long. Delivery is required within 90 days after order, with a material need ship date of February 24, 2027. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Individual units must be packed in paperboard boxes, zip lock bags, or blister packs, with up to twenty units placed in corrugated fiberboard boxes meeting a minimum bursting strength of 200 psi. Palletization must comply with RP001 requirements. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information. While the solicitation mentions a total small business set-aside in some metadata, the specific RFQ text indicates it is not a small business set-aside. Evaluation will be conducted in accordance with the Buy American and Balance of Payments Program under DFARS Part 225.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E5-27-Q-0048

Solicitation SPE8E5-27-Q-0048 is a firm fixed price requirement issued by DLA Troop Support for the procurement of 1,000 dozen hand files, identified by NSN 5110-00-242-5386 and part number NFES 1059. The files must be American pattern, mill style, made of carbon alloy steel, and conform to Basic Drawing 14153 NFES1059-IPD-002425386 Revision A. Key technical specifications include a length of 12 inches, specific tooth counts per inch on flats and edges, and a maximum hardness of 45 on the Rockwell C scale for the tang. Each item must be permanently marked with the country of manufacture. Delivery is required within 100 days after receipt of order, with inspection and acceptance occurring at the destination. Packaging must adhere to MIL-STD-2073-1E and RP001 DLA Packaging Requirements, and all fiberboard and cushioning materials must comply with EPA recovered materials guidelines. Marking must follow MIL-STD-129. The contract incorporates the Buy American and Balance of Payments Program and requires electronic invoicing through the Wide Area WorkFlow system. This solicitation is not a small business set-aside.

Saw Blade and Handtool Manufacturing

POSTED

about 6 hours ago

DEADLINE

95--PLATE,METAL

Solicitation # SPE8E4-27-Q-0030

Solicitation SPE8E4-27-Q-0030 is a request for quotation issued by DLA Troop Support for the procurement of 50 units of high-strength rolled structural steel plates. The material must be Grade DH36, normalized, with dimensions of 0.500 inches thick, 60 inches wide, and 240 inches long. The procurement is governed by MIL-S-22698C(2) and American Bureau of Shipping (ABS) rules for building and classing steel vessels. A critical requirement for acceptance is that all certificates must include an ABS Surveyor's endorsement, and a Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment. The contract mandates strict adherence to the Qualified Suppliers List for Distributors (QSLD) and Manufacturers (QSLM), with only listed suppliers eligible for award. Marking requirements are extensive, requiring continuous identification including the contract delivery order number, NSN, and manufacturer details, with specific letters AB required for material manufactured to MIL-S-22698. Packaging and preservation must comply with MIL-STD-2073-1E and ASTM A700, ensuring protection from physical damage. Delivery is required within 30 days after receipt of order (ADO) to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination.

Rolled Steel Shape Manufacturing

POSTED

about 11 hours ago

DEADLINE

in about 13 hours

Supply of Tightening Bolt Assembly (NSN 4420-01-504-6304)This subcontract involves the supply of 21 tightening bolt assemblies, specifically NSN 4420-01-504-6304 from Fluid Handling LLC, to support prime contractors for DLA Distribution San Joaquin. The work is performed under NAICS code 332722 with the place of performance located in Tracy, California. The contractor must adhere to strict military specifications, including packaging per RP001 and ASTM D3951 and marking per MIL-STD-129. Additionally, the agreement mandates full compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards to ensure national security and quality requirements are met.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supplier of Copper Alloy 360 Metal BarThis subcontract involves the supply of cold worked, half-hard, round copper alloy 360 metal bars for prime contractors supporting DLA DIST SAN JOAQUIN procurement projects. The requirement specifies 1.500 inch diameter bars in lengths ranging from 10 to 12 feet, with a total delivery volume of 153 feet. All materials must strictly conform to ASTM B16/B16M-19, ASTM B249/B249M-23, and SAE AMS-STD-185 standards. The supplier must maintain a QSLD listing and provide a Certificate of Quality Compliance to ensure material integrity. Packaging and delivery must adhere to ASTM B900 and MIL-STD-2073-1E guidelines. Performance for this contract will take place in Tracy, California, under NAICS code 423430.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Supply of Vane Axial Fans (NSN 4140010750419)This subcontract involves the supply of two Vane Axial Fans, identified by NSN 4140010750419, for prime contractors supporting DLA Troop Support. The selected provider must act as the source or manufacturer, ensuring that all packaging adheres to ASTM D3951 standards and quality sampling is performed according to MIL-STD-1916 or ASQ H1331. Delivery is required FOB Origin to Tracy, California. To be eligible, contractors must maintain ISO 9001:2015 certification and provide a CMMC Level 2 Self-Assessment. Additionally, the provider must comply with the Buy American and Balance of Payments Program requirements. This opportunity falls under NAICS code 335211 and is managed through the Department of Defense via DLA DIST San Joaquin.

Electric Housewares and Household Fan Manufacturing

POSTED

DEADLINE

Supply of Eaton Check Valves (NSN 4820123479230)This subcontract involves the procurement and delivery of 12 genuine Eaton Germany GmbH check valves, part number P-RV-30S (NSN 4820123479230), to support prime contractors fulfilling Department of Defense supply contracts. The selected provider is responsible for ensuring all hardware is mercury-free and strictly adheres to the Buy American and Balance of Payments Program requirements. The scope of work includes specific marking and packaging standards according to MIL-STD-129 and MIL-STD-2073-1E. All units are to be delivered FOB Origin to DLA Distribution San Joaquin located in Tracy, California. The contract falls under NAICS code 423810 and is managed by the Department of Defense.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS