Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MICROCIRCUIT, DIGITA

Active
SPE7M5-26-T-330VFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of a digital microcircuit identified by NSN 5962010824487 and part number 11C90DM/B from ROCHESTER ELECTRONICS LLC, with a quantity of 36 units to be delivered FOB Origin within 148 days after order issuance, with a required delivery date of February 6, 2027. The item is classified as a commercial item and falls under Federal Supply Class 5962 for electronic microcircuits, subject to stringent technical, quality, and packaging requirements defined by the DLA Master List of Technical and Quality Requirements. The contractor must comply with comprehensive ESD and EMI protection standards per MIL-PRF-81705, using qualified barrier materials from the QPL-81705 list, and must implement an ESD control program in accordance with MIL-STD-1686 or ANSI/ESD S20.20, including certified workstations and employee training as outlined in MIL-HDBK-773. Packaging must adhere to MIL-STD-2073-1E with preservation method GX, using cushioning that meets A-A-59136 Class 1 Grade B density specifications, and all units must be marked with special code 39 to indicate ESD sensitivity in compliance with MIL-STD-129. Lead finish must be labeled per IPC/JEDEC J-STD-609, and the use of mercury or mercury compounds is strictly prohibited in preservation, packaging, packing, and marking except for specified functional components under NAVSEA guidelines. Traceability and test documentation must be maintained, submitted electronically to Maritime.CDAP.Monitor@dla.mil at least 15 days prior to shipment in compressed files not exceeding 15 MB with a defined naming convention, and physical copies must accompany each lot along with written authorization from the contract administrator before any shipment occurs; failure to comply will result in non-final payment. The contractor must hold qualification on the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List for FSC 5961 and 5962, and must retain supply chain traceability records per DLA Procurement Note C03. Additionally, the contractor is required to meet the Cybersecurity Maturity Model Certification Level 2 Self-Assessment and safeguard covered defense information under DFARS 252.204-7

General Info

36 ESD-sensitive microcircuits, QSL-qualified, MIL-PRF-81705 packaging, CMMC Level 2, 148-day lead time, FOB origin.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

STORAGE AND DISTRIBUTION DETACHMENT, COLUMBUS, OH, 43213, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M5-26-T-330V for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Margaret Smith
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MICROCIRCUIT,DIGITA
MICROCIRCUIT,DIGITAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ014: QUALIFIED SUPPLIERS LIST OF DISTRIBUTORS (QSLD) AND QUALIFIED
TESTING SUPPLIERS LIST (QTSL) FOR FEDERAL SUPPLY CLASS (FSC) 5961
SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS. THIS IS A QUALIFIED ITEM. QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE M01 "QUALIFIED SUPPLIERS FOR FEDERAL SUPPLY CLASS (FSC)
5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS" APPLY.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL OF A TYPE')
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). FEDERAL SUPPLY CLASS (FSC) 5962 ELECTRONIC MICROCIRCUITS (MAR 2016)
(a) This procurement is for an item in Federal Supply Class (FSC) 5962, Electronic Microcircuits. For this acquisition, the definition of "exact
SPE7M5-26-T-330V
SECTION B
product" in the provision at Procurement Note L04 is modified to include parts provided by an approved source specified in the product item description (PID) of the contract that are marked with the CAGE and part number of an authorized manufacturer of that approved source.
(b) In addition to the following requirements outlined in paragraphs (c) through (d) below, documentation of traceability and test shall be maintained and provided in accordance with the clauses in this solicitation/contract.
(c) DLA Land and Maritime Form 918 as cited below is required on contracts awarded with inspection at destination. For contracts awarded with inspection at source, the documentation required per the contract will be verified by the Government QAR.
(1) The contractor shall provide documentation of traceability or a test report in accordance with the requirements outlined in block 6 of the DLA Land and Maritime Form 918, Traceability/Test Documentation Cover Sheet.
(2) Not later than 15 days prior to the Delivery Date specified in the contract, the contractor shall email a copy of the completed DLA L<(>&<)>M Form 918 to Maritime.CDAP.Monitor@dla.mil, along with unredacted traceability documentation or a complete test report as required for the contractor by Block 6 of the DLA L<(>&<)>M Form 918. The contractor is not authorized to ship material until the contractor receives written confirmation from the contract administrator stating that the submitted traceability documentation or test report is adequate and that the contractor may proceed with shipment.
(3) Once authorized to ship, the contractor shall include within the packaging for each lot shipped a paper copy of the DLA L<(>&<)>M Form 918 and a copy of the written confirmation from the contract administrator authorizing shipment.
(4) Any payment by the Government will not be final if (i) the material is shipped without authorization from the contract administrator, or (ii) it is determined subsequent to receipt of the parts that the approved traceability documentation/test report is not included within the packaging of the parts shipped, or
(iii) it is determined subsequent to receipt of the parts that the traceability documentation/test report and DLA L<(>&<)>M Form 918 included in the packaging is not the identical documentation that was the basis for the contract administrator to provide authorization for the contractor to ship.
(d) When submitting emails containing attachments of digital copies of traceability or test documentation, the contractor shall (1) Limit the size of each email (including all attachments) to less than 15 megabytes. Large attached files shall be compressed (zip file) in a manner to ensure that all documentation fits within one emailfor each lot shipped. (2) Title both the attached documentation and the subject heading of the email using the following naming convention: "Documentation Type Contract Number<(>,<)> CLIN, NSN." For example: "Traceability Documentation SPE7M500C0026, 0001<(>,<)> 5962002695308"
"Test Report SPM7M500M7650, 0001, 5962010043894"
(e) The DLA L<(>&<)>M Form 918 may be obtained from the DLA Counterfeit Detection and Avoidance Program (CDAP) web page found at: http://www.dla.mil/LandandMaritime/Business/Selling/ http://www.dla.mil/LandandMaritime/Business/Selling/ CounterfeitDetectionAvoidanceProgram.aspx. UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
SPE7M5-26-T-330V
SECTION B
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement) ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
ROCHESTER ELECTRONICS LLC 3V146 P/N 11C90DM/B
SPE7M5-26-T-330V
SECTION B
PR: 7017315646 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017315646 0001 EA 36.000
NSN/MATERIAL:5962010824487
DELIVERY (IN DAYS):0148
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:D
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:100
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
SPE7M5-26-T-330V
SECTION B
PR: 7017315646 PRLI: 0001 CONT’D
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
CUSH/DUNN MAT: ZZ # CUSHIONING REQUIREMENT: A-A-59136, CLASS 1, GRADE B, MINIMUM DENSITY: 1.7 pounds per cubic feet, MAXIMUM DENSITY: 2.2 pounds per cubic feet. CUSH/DUNN THKNESS: Z Cushioning thickness will be at least 1/8 of an inch thicker than the length of the component's leads. In lieu of these requirements, components can be placed in ESD protective form fitting containers that immobilize and maintain the original configuration of the leads. Additional anti-static cushioning may be applied to protect the component.
ZZ ADDITIONAL SPECIAL MARKING: 39 ESD sensitive electronic device requirements of MIL-STD-129 apply
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
ATTENTION:
THIS DEVICE IS CLASSIFIED AS AN ELECTROSTATIC
DISCHARGE (ESD) SENSITIVE DEVICE:
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-STD-1686 or ANSI/ESD S20.20). Guidance for implementation of MIL-STD-1686 is detailed in MIL-HDBK-263.
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773). ALL ITEMS AND PACKAGES SHALL BE HANDLED, PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION -OR- FIELD SERVICE KIT. FOR FURTHER INFORMATION, CONSULT MIL-HDBK-773.
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX". REQUIRED BARRIER BAG IS MIL-PRF-81705, TYPE I
SPE7M5-26-T-330V
SECTION B
PR: 7017315646 PRLI: 0001 CONT’D
(MIL-STD-2073-1E, PARAGRAPH 5.2.4.1 AND APPENDIX J,
TABLE J.Ia, Code GX).
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING, HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PARCEL POST ADDRESS:
SW0700
DLA DISTRIBUTION DDWO
3990 EAST BROAD ST BLDG 11 SEC 8
STORAGE AND DISTRIBUTION DETACHMENT
COLUMBUS OH 43213
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW0700
DLA DISTRIBUTION DDWO
3990 EAST BROAD ST BLDG 11 SEC 8
STORAGE AND DISTRIBUTION DETACHMENT
COLUMBUS OH 43213
US
Need Ship Date:12/23/2026 Original Required Delivery Date:02/06/2027
SPE7M5-26-T-330V NSN/Part Number: 5962-01-082-4487 Quantity: 36 EA Purchase Request: 7017315646QTY: 36 Delivery: 148 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334220
New
DIBBS
COUPLER, ROTARY, RADIO FThe contract solicitation SPE7M5-26-T-331K seeks the procurement of nine units of a Rotary Radio Frequency Coupler identified by NSN 5985010182621 and part numbers 3131 from Frontgrade Technologies Inc. and 36-2120-0 from Diamond Antenna & Microwave Corporation, with a required delivery within 253 days of award and FOB Origin terms. The item must conform to technical and quality specifications from the DLA Master List of Technical and Quality Requirements, including RQ006 for Quality Conformance Inspection and RD004 for CMMC Level 2 Self-Assessment, with precedence given to DLA directives over commercial standards such as ASTM D3951. Packaging and marking are strictly governed by MIL-STD-129 and DLA Packaging Requirements RP001, with hazardous materials required to meet TQ Requirement IP025 per FED-STD-313, while non-hazardous items must follow commercial packaging standards but remain subordinate to DLA mandates. The contract mandates electronic invoicing exclusively through WAWF, with inspection and acceptance performed at the origin, and compliance with cybersecurity requirements including Safeguarding Covered Contractor Information Systems and NIST SP 800-171 assessments. All offerors must possess a UEI and CAGE code, represent their small business status if applicable, and comply with clauses prohibiting forced confidentiality agreements, trafficking in persons, and requiring employment eligibility verification. The solicitation indicates an automated award process likely based on Lowest Price Technically Acceptable (LPTA), with no pricing data provided in Section B and no evaluation factors explicitly listed beyond the requirement to meet minimum technical standards. Deliveries are directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with additional obligations including flow-down of cybersecurity, hazardous material labeling, and ocean transportation requirements to subcontractors, while all documentation must adhere to FAR and DFARS clauses including those related to changes, contract types, and unenforceable obligations.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334220
New
DIBBS
ATTENUATOR, VARIABLEThe contract issued by the Defense Logistics Agency (DLA) under solicitation number SPE7M8-26-T-5401 is for the procurement of 10 units of a variable attenuator, identified by NSN 5985-01-188-3603 and part number G286722-1, manufactured by Raytheon Company. The solicitation is a total small business set-aside under NAICS code 334220, requiring all offerors to qualify as small businesses and submit representations per FAR and DFARS requirements, including UEI and CAGE codes. Delivery is due 378 days after award, with a need ship date of June 9, 2026, and the product must be delivered FOB destination to the DLA Distribution facility at New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, governed by FAR 52.246-2, with all packaging and labeling required to comply with MIL-STD-129 for barcoding and marking, and packaging standards based on FED-STD-313 classification—ASTM D3951 for non-hazardous materials and TQ Requirement IP025 for hazardous materials, with DLA’s Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001, and all shipments must be accompanied by proper documentation in accordance with WAWF for electronic invoicing and payment, with no alternative systems accepted. The contract includes a comprehensive suite of regulatory clauses covering employment equity, trafficking in persons, electronic payment submission, cybersecurity (including NIST SP 800-171 and safeguarding defense information), export control, hazardous materials labeling, and prohibitions on acquisition of equipment from Communist Chinese military companies or use of hexavalent chromium. The contract type and unit price are not specified, but payment is subject to accelerated terms for small business subcontractors, and changes to the contract are governed under fixed-price provisions. Offerors must submit proposals exclusively through the DLA Internet Bid Board System (DIBBS) by the deadline, with no physical or alternative submissions accepted, and all technical and quality requirements referenced by 'R' or 'I' numbers from the DLA Master List must be fully incorporated.
ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334220
New
DIBBS
ADAPTER, ANTENNA TOThe solicitation seeks one unit of an antenna adapter identified by NSN 5985-01-680-8965 under contract number SPE7M5-26-T-327W, issued by the Department of Defense’s Defense Logistics Agency, Active Devices Division. Delivery is required within 20 days after order date to the specified location at 5500 IH 10 East, San Antonio, TX 78219-4599, with shipping instructed to occur by the fastest traceable means. The item must comply with all technical and quality requirements referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA Packaging Requirements RP001, with specific preservation, container, and coding parameters defined in the contract documentation. The procurement is subject to the Buy American Act and Berry Amendment, with a reduced threshold of $150,000, and requires full compliance with DFARS 252.225-7001 and 252.240-7997 for NIST SP 800-171 cybersecurity controls. Contractors must represent their small business status in SAM, disclose any use of non-domestic materials, and comply with regulations regarding trafficking in persons, whistleblower rights, and cyber incident information disclosure. The contract includes mandatory clauses on government personnel work product, information disclosure, and safety issue notification. All invoices and receiving reports must be submitted via WAWF using web entry, EDI, or FTP, and the item is subject to destination inspection under FAR 52.246-1. Though not a small business set-aside, the solicitation may be eligible for automated award and is rated DO under the Defense Priorities and Allocations System. Offerors must maintain active SAM registration, provide correct UEI and CAGE codes, and comply with deviation 2026-00038 affecting multiple FAR clauses including payment, small business representation, and hazardous materials labeling.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334220
New
Federal
Audio/Video Signal Processing and Distribution
FA5613 700 Cons Pk

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334220
New
Federal
59--WAVEGUIDE ASSEMBLY
DLA Land And Maritime

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334220
New
Federal
HANDHELD RADIOThis solicitation for handheld radios, numbered SPMYM226Q7823, is a total small business set-aside under NAICS code 334220, issued by the Department of Defense’s DLA Maritime – Puget Sound office in Bremerton, Washington. All responses must be submitted electronically via email to diana.baldwin@dla.mil by the deadline of July 28, 2026, at 8:00 PM ET, and only fully completed and signed solicitation forms will be considered responsive. Bidders are required to provide detailed contractor information, including CAGE code, point of contact, quote, and delivery terms, with all items to be delivered FOB destination in Silverdale, Washington. Lead times and delivery dates must be clearly stated, and the manufacturer’s details—name, address, and country of origin—must be declared per Section K. Compliance with the FAR 52.204-24 requirement regarding cybersecurity and information systems must be confirmed by checking the appropriate boxes. Contractors must ensure their proposals meet the NIST SP 800-171 security requirements unless the items being quoted are classified as Commercial Off-The-Shelf (COTS), in which case an exemption applies but must be explicitly identified and documented during bidding. Any COTS items must be clearly marked and justified to the contracting officer. The solicitation must be reviewed in its entirety, with specific attention to Box 28 and the certification requirements in Boxes 30a, 30b, and 30c on Page 1. All submissions must be complete, accurate, and submitted via email only; failure to comply with any submission requirement will render a bid non-responsive. The place of performance is specified as Silverdale, Washington, with the contracting officer contact information provided for questions and submission purposes.
DLA Maritime - Puget Sound

POSTED

about 23 hours ago

DEADLINE

in about 9 hours
View Details
NAICS: 334220
New
Federal
USAGM Philippine TS - Components used in the BBC type shortwave radio transmitters PHT 4 to 12 including PA tube sockets and its tuning elementsThe U.S. Agency for Global Media (USAGM) is soliciting quotes for components used in BBC-type shortwave radio transmitters PHT 4 to 12, including PA tube sockets and tuning elements, for replacement purposes at its Philippines Transmission Station. This solicitation, issued as a Combined Synopsis/Solicitation under number 951700-26-Q-0015, is structured as a Request for Quotes and follows the Federal Acquisition Regulation for commercial items, with evaluations based on the Lowest Priced Technically Acceptable approach. All submissions must be sent via email no later than 1:00 P.M. Eastern Time on July 29, 2026, and must include the solicitation number in the subject line, be in PDF format, not exceed 23 MB in total size, and be signed by an authorized representative. Quotes must reference the attached SF-1449 Contract Line Items to ensure alignment with technical requirements, and failure to meet these specifications will result in rejection. Offerors must be registered and listed as active in the System for Award Management (SAM) with a valid UEI number prior to award, and must provide prompt payment terms and the correct remittance address. The contract will be awarded as a firm-fixed-price purchase order to the technically acceptable offeror submitting the lowest price, with no discussions expected and awards made based solely on initial submissions. Performance is required to be completed no later than September 30, 2026, with an estimated award date of August 6, 2026. All questions must be submitted in writing to RPHernandez@usagm.gov and copied to Nellis@usagm.gov by 1:00 P.M. ET on July 24, 2026. The government will not accept faxed, mailed, hand-delivered, or oral quotes; only properly formatted email submissions with the required attachments are valid. Contract terms, conditions, and clauses are governed by the SF-1449 and provisions in effect through June 11, 2025, and the awardee must maintain active SAM registration throughout contract performance and until final payment.
Office Of Contracts

POSTED

about 23 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334220
New
Federal
CRX Tactical Communications Architecture
W6QM Micc-Ft Drum

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334220
New
Federal
VOLTMETER 6625-01-477-0732The U.S. Department of Defense, through DLA Land and Maritime, is soliciting offers for a Voltmeter identified by NSN 6625-01-477-0732 under a Firm-Fixed Price Indefinite Delivery Contract with a three-year base period and two one-year option periods, utilizing FAR Part 12.201 commercial item procedures. This acquisition is a 100% Small Business Set-Aside with a size standard of 1,250 employees, and the item is subject to the Buy American Act. The estimated annual demand is 119 units, with delivery required within 99 days of issuance of each individual delivery order, and no shipments permitted prior to the issuance of a DD Form 1155. Approved sources include IDEAL PRECISION METER CO and PHAOSTRON INSTRUMENT AND ELECTRONIC, with specific part numbers designated. Offering responses must be submitted via the DIBBS system using a scanned SF1449 RFP form or via email to the designated contract specialist, and all proposals must be in English and U.S. dollars. Evaluation will consider price, delivery, and performance, with submissions due on or about August 3, 2026, and the solicitation will be available exclusively online via the DIBBS portal.
DLA Land And Maritime

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334220
New
Federal
RFI - REPLACEMENT OF THE FULL MISSION SHIP SIMULATOR (FMSS) - USMMA
6923G2 DOT Maritime Administration

POSTED

about 23 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334220
New
Federal
59--ANTENNAThe contract seeks the procurement of 40 units of NSN 5985013199456 ANTENNA with a delivery requirement to DLA Distribution Warner Robins within 511 days after award. Only two approved sources are authorized for this acquisition, identified as 00752 CNI22-9-1 and 00752 DMCNI22-9-1. The solicitation is issued as an RFQ under number SPE7M526Q0770 and is accessible exclusively online through the provided SAM.gov link; no hard copies are available, and no specifications, plans, or drawings are supplied. All responsible vendors may submit electronic quotes, which will be considered if received before the deadline of August 6, 2026. The opportunity is unreserved, with no set-aside classification, and falls under NAICS code 334220 for communications equipment manufacturing. The contracting activity is managed by the DLA Land and Maritime office located in Columbus, Ohio, and any questions must be directed to the designated point of contact via email, with further details available through the official DIBBS website using the solicitation number.
DLA Land And Maritime

POSTED

about 23 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334220
New
Federal
Radio Communication SystemThe U.S. Department of Defense, through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York, has issued a solicitation for a Radio Communication System under the small business set-aside program designated as a Total Small Business Set-Aside in accordance with FAR 19.5. This combined solicitation, identified by number W911S26U3762 and classified under NAICS code 334220 for Radio and Television Broadcasting and Communications Equipment, is intended to procure a system that meets specific operational requirements for military communications. The opportunity is restricted exclusively to small businesses, ensuring eligibility and compliance with SBA size standards. The solicitation was posted on July 27, 2026, with a firm response deadline of July 29, 2026, at 8:05 p.m. Eastern Time. Although the place of performance is listed with a zip code of 22427, no specific city or state is provided in the details, indicating a potential focus on logistics coordination within the broader Department of Defense infrastructure. Jason Donovan from the contracting office serves as the primary point of contact, reachable via phone at 804-633-8737 or email at jason.r.donovan3.civ@army.mil. All proposals must be submitted through the SAM.gov portal linked in the solicitation, and failure to meet submission deadlines or compliance requirements will result in disqualification.
W6QM Micc-Ft Drum

POSTED

about 23 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334118
New
DIBBS
MICROCIRCUIT, DIGITAThe contract solicits ten units of a microcircuit designated as DIGITA with NSN 5962-01-369-4271, under solicitation number SPE7M5-26-T-355A, issued by the Department of Defense’s Active Devices Division. Delivery is required within 46 days after order, and responses must be submitted by August 7, 2026. The item is classified under NAICS code 334118 and is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions tied to its status as a qualified item under Federal Supply Class 5962. Compliance includes adherence to the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List, as well as fulfillment of procurement note M01 governing qualification standards for semiconductors and electronic microcircuits. Packaging must conform to DLA standards, and contractors are obligated to retain full supply chain traceability documentation per DLAD Procurement Note C03 dated August 2016. Physical identification of the bare item is required, and all government identification must be removed from non-accepted supplies. The solicitation further applies to covered defense information, and no data package is available, meaning the offeror must provide complete technical and approval documentation for both the primary and any alternate part. The point of contact is Margaret Smith with the Department of Defense.
Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITA
Semiconductor and Related Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRIThe contract specifies the procurement of electrical plug connectors identified by part number M39012/30-0503 and NSN 5935004304109, with a total quantity of 360 units divided into two line items: 36 units at $7017602347-0001 and 324 units at $7017602347-0002, both at a unit price of $1.00. Delivery is required within 84 days from the contract date, with FOB origin terms, zero variance in quantity, and inspection and acceptance occurring at the destination. The item is classified as a commercial item and must comply with MIL-PRF-39012F Sup 1 and MIL-PRF-39012/30J specifications. It is subject to strict quality and technical requirements mandated by the DLA Master List of Technical and Quality Requirements, which override all other standards. Zero-defect sampling is required under MIL-STD-1916 or equivalent zero-based plans, and attributes are assigned verification levels or AQLs consistent with critical, major, and minor classifications. The product must be marked and packaged per MIL-STD-129, commercially packaged per ASTM D3951 unless hazardous, in which case Fed-Std-313 IP025 applies, and palletization must meet DLA packaging rules. Use of ozone-depleting substances is prohibited unless prior written approval is obtained, and the item is restricted to qualified products listed under QPL for FSC 5935. Two distinct delivery addresses are specified—one for San Diego, CA and one for Robins AFB, GA—with required ship dates of January 15, 2026 and January 1, 2027 respectively, though the original delivery deadline for both is December 5, 2026. All documentation and compliance must adhere to DLA procedures and the solicitation SPE7M5-26-T-354T, issued under NASIC code 334417 by the Department of Defense's Active Devices Division.
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
COOLER, AIR, ELECTRON
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
DUMMY CONNECTOR, PLUThis contract specifies the procurement of 230 units of a dummy connector, plug, identified by drawing number 1555424 Revision W and NSN 5935-00-911-7195, under solicitation SPE7M5-26-T-327A. The item is source-controlled, meaning only approved manufacturers—DCX-Chol Enterprises Inc, Diehl Defence GmbH & Co. KG, ITT Cannon LLC, Thermal Electronics Inc, and BAE Systems—are eligible to supply the component, and all delivered units must strictly conform to the drawing and associated limited rights data, which the government does not provide. Offerors must have direct access to this data or traceability to the approved sources, and any new vendors seeking qualification must contact the cognizant design activity. The contract prohibits the use of ozone-depleting chemicals and intentional inclusion of mercury or mercury-containing compounds, except for specific functional applications like batteries, sensors, and instruments specified by NAVSEA, which must include a secondary containment. Packaging must comply with MIL-STD-2073-1E using a clean/dry preservation method, unit pack with sealed plastic bag and fiberboard box, and labeling must adhere to MIL-STD-129 with no special marking required. Delivery is FOB origin, with a 186-day ADO timeline, and inspection and acceptance occur at the destination location, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates electronic invoicing and receiving reports through WAWF and requires compliance with all applicable cybersecurity standards, including NIST SP 800-171 and safeguarding of covered defense information under DFARS 252.204-7012. Offerors must also certify compliance with federal regulations on trafficking in persons, employment eligibility verification, sustainable products, and hazardous materials handling. The solicitation incorporates numerous FAR and DFARS clauses related to subcontracting, changes, inspection, default, payment, whistleblower rights, cybersecurity, and prohibitions on acquiring equipment from designated Chinese vendors or using hexavalent chromium. Socioeconomic set-asides for small businesses, WOSB, SDVOSB, HUBZone, and 8(a) firms are eligible, and the contract is subject to all applicable federal procurement rules with no defined contract type specified but clearly fixed-price in nature given the clauses referenced.
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334290
New
DIBBS
PANEL, RADIO FREQUENThe contract solicitation SPE7M5-26-T-328U seeks the procurement of 33 units of a Radio Frequency/Electromagnetic Interference Shielded Panel identified by NSN 5999014938118 under a total small business set-aside, with NAICS code 334290. Delivery is required within 148 days of award, with a target delivery date of February 7, 2027, and must be made FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must comply with stringent technical and quality standards including MIL-STD-1916 for sampling with zero non-conformances required in inspection lots, MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking and barcoding, with no special marking prescribed. All packaging and palletization must adhere to DLA Packaging Requirements for Procurement (RP001) and hazardous material handling procedures (IP025). The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval. Compliance with cybersecurity and regulatory mandates is critical, including a CMMC Level 2 Self-Assessment (RD004) and adherence to NIST SP 800-171 requirements for safeguarding covered contractor information systems, under deviations 2026-00038 and 2026-O0025. The contract incorporates FAR and DFARS clauses covering equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, export controls, prohibition of hexavalent chromium, electronic payment submission via WAWF, and accelerated payments to small business subcontractors. Inspection and acceptance occur at the destination by the government, with contractor responsibility for full compliance with all referenced standards and configuration change management (RQ002). Offerors must hold a valid UEI and CAGE code, self-certify as a small business, and disclose any joint venture arrangements. Payments are subject to DFARS electronic submission requirements, and no contract price is listed in the CLIN, indicating pricing is to be determined upon award.
Other Communications Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThe contract is for the procurement of 14 units of a CONNECTOR, RECEPTACL identified by NSN 5935-01-699-2808 under solicitation SPE7M5-26-T-330T, issued by the Department of Defense’s Active Devices Division. Delivery is required within 72 days of order receipt, with a mandatory delivery date of October 8, 2026, and shipment must be FOB Origin to the designated receiving warehouse in Tracy, California. Full and open competition applies, and the contract follows simplified acquisition procedures. The item must meet technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging and marking must comply with MIL-STD-129 for labeling, barcoding, and palletization per RP001, while hazardous materials require adherence to FED-STD-313 and TQ Requirement IP025, and non-hazardous items must be commercially packaged. Mercury or mercury-containing compounds are prohibited except in specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-approved reagents, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, with sampling conducted under MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, with AQLs of 0.1, 1.0, and 4.0, and any unspecified attributes are deemed major. Acceptance requires zero non-conformances if sampling is based on MIL-STD-105/ASQ Z1.4 unless otherwise noted. The contractor must comply with stringent cybersecurity mandates including DFARS 252.204-7012 for safeguarding covered defense information and 252.240-7997 for NIST SP 800-171 compliance, submitting an assessment score via the Supplier Performance Risk System. Export-controlled items are restricted under DFARS 252.225-7048, and the use of telecommunications equipment from prohibited entities such as Huawei or ZTE is banned
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
HEAT SINK, ELECTRICA
Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
CONTACT, ELECTRICALThis contract is for the procurement of electrical contacts identified by NSN 5999-01-699-2986 and part number 200-503-109, with a total quantity of 171 units, each priced at $171.00, resulting in a total contract value of $29,241.00. The items must be delivered within 70 days from the required delivery date of December 6, 2026, under FOB origin terms with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container specifications. All items must be marked in accordance with MIL-STD-129 without special marking, and palletization must follow DLA Packaging Requirements. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. Technical and quality requirements are governed by the DLA Master List, and the solicitation number is SPE7M5-26-T-329Z. The contract is issued by the Department of Defense’s Active Devices Division, with a response deadline of July 27, 2026, and the point of contact is Andrew Bracken. The unit of issue is the individual, aligned with ANSI X12 standards, and transportation protocols follow DLA Procurement Notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
New
DIBBS
ANTENNA

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details