Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MICROCIRCUIT, LINEAR

Active
SPE7M5-26-T-367ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a linear microcircuit under Federal Supply Class 5962, requiring strict adherence to defense procurement standards for quality, traceability, and packaging. The item must be sourced from approved manufacturers, with supply chain documentation retained per DLA Directive C03 and tracked through the DLA Land and Maritime Form 918, which must be submitted electronically at least 15 days before delivery and approved by the contract administrator prior to shipment. Each unit must be individually marked per IPC/JEDEC J-STD-609 to identify lead content, and all packaging must comply with MIL-STD-129 and DLA packaging requirements, including ESD and EMI protection using qualified barrier materials listed on QPL-81705. The component requires cushioning to prevent lead damage, with specific density and thickness standards, or equivalent form-fitting ESD containers. The contract prohibits use of ozone-depleting substances without explicit approval and mandates CMMC Level 2 self-assessment certification. Traceability and test reports must be correctly labeled and submitted within email size limits, and shipping is restricted until formal authorization is received. The item must be delivered FOB origin to a designated Columbus, Ohio location within 314 days, with zero variance allowed on the quantity of six units.

General Info

Procure six FOB origin linear microcircuits per defense standards with full traceability, ESD compliance, and CMMC Level 2 certification by day 314.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334413 - Semiconductor and Related Device ManufacturingView NAICS

Place of Performance

STORAGE AND DISTRIBUTION DETACHMENT, COLUMBUS, OH, 43213, US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-367Z.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Amy Plymale-Hillis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MICROCIRCUIT,LINEAR
MICROCIRCUIT,LINEAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ014: QUALIFIED SUPPLIERS LIST OF DISTRIBUTORS (QSLD) AND QUALIFIED
TESTING SUPPLIERS LIST (QTSL) FOR FEDERAL SUPPLY CLASS (FSC) 5961
SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS. THIS IS A QUALIFIED ITEM. QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE M01 "QUALIFIED SUPPLIERS FOR FEDERAL SUPPLY CLASS (FSC)
5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS" APPLY.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
FEDERAL SUPPLY CLASS (FSC) 5962 ELECTRONIC MICROCIRCUITS (MAR 2016)
(a) This procurement is for an item in Federal Supply Class (FSC) 5962, Electronic Microcircuits. For this acquisition, the definition of "exact product" in the provision at Procurement Note L04 is modified to include parts provided by an approved source specified in the product item description (PID) of the contract that are marked with the CAGE and part number of an authorized manufacturer of that approved source.
(b) In addition to the following requirements outlined in paragraphs (c) through (d) below, documentation of traceability and test shall be maintained and provided in accordance with the clauses in this solicitation/contract.
(c) DLA Land and Maritime Form 918 as cited below is required on contracts awarded with inspection at destination. For contracts awarded with inspection at source, the documentation required per the contract will be verified by the Government QAR.
(1) The contractor shall provide documentation of traceability or a test report in accordance with the requirements outlined in block 6
SPE7M5-26-T-367Z
SECTION B
of the DLA Land and Maritime Form 918, Traceability/Test Documentation Cover Sheet.
(2) Not later than 15 days prior to the Delivery Date specified in the contract, the contractor shall email a copy of the completed DLA L<(>&<)>M Form 918 to Maritime.CDAP.Monitor@dla.mil, along with unredacted traceability documentation or a complete test report as required for the contractor by Block 6 of the DLA L<(>&<)>M Form 918. The contractor is not authorized to ship material until the contractor receives written confirmation from the contract administrator stating that the submitted traceability documentation or test report is adequate and that the contractor may proceed with shipment.
(3) Once authorized to ship, the contractor shall include within the packaging for each lot shipped a paper copy of the DLA L<(>&<)>M Form 918 and a copy of the written confirmation from the contract administrator authorizing shipment.
(4) Any payment by the Government will not be final if (i) the material is shipped without authorization from the contract administrator, or (ii) it is determined subsequent to receipt of the parts that the approved traceability documentation/test report is not included within the packaging of the parts shipped, or
(iii) it is determined subsequent to receipt of the parts that the traceability documentation/test report and DLA L<(>&<)>M Form 918 included in the packaging is not the identical documentation that was the basis for the contract administrator to provide authorization for the contractor to ship.
(d) When submitting emails containing attachments of digital copies of traceability or test documentation, the contractor shall (1) Limit the size of each email (including all attachments) to less than 15 megabytes. Large attached files shall be compressed (zip file) in a manner to ensure that all documentation fits within one emailfor each lot shipped. (2) Title both the attached documentation and the subject heading of the email using the following naming convention: "Documentation Type Contract Number<(>,<)> CLIN, NSN." For example: "Traceability Documentation SPE7M500C0026, 0001<(>,<)> 5962002695308"
"Test Report SPM7M500M7650, 0001, 5962010043894"
(e) The DLA L<(>&<)>M Form 918 may be obtained from the DLA Counterfeit Detection and Avoidance Program (CDAP) web page found at: http://www.dla.mil/LandandMaritime/Business/Selling/ http://www.dla.mil/LandandMaritime/Business/Selling/ CounterfeitDetectionAvoidanceProgram.aspx. UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
SPE7M5-26-T-367Z
SECTION B
MICROCIRCUITS
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement)
RD002, COVERED DEFENSE INFORMATION APPLIES
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE (ODS) IN THE DESIGN, MANUFACTURING, TESTING, CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM UNDER ANY MILITARY OR FEDERAL SPECIFICATION, STANDARD OR DRAWING REFERENCED IN THIS ITEM DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS OBTAINED. THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS. THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS DEFINED IN "FAR 11.001" OR TO PART-NUMBEREDONLY ITEMS.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED, UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
NATIONAL SEMICONDUCTOR CORPORATION 27014 P/N 10273830
ROCHESTER ELECTRONICS LLC 3V146 P/N 10273830
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017695577 0001 EA 6.000
NSN/MATERIAL:5962011999390
DELIVERY (IN DAYS):0314
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:K3 CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:B9 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
SPE7M5-26-T-367Z
SECTION B
PR: 7017695577 PRLI: 0001 CONT’D
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals. CUSH/DUNN MAT: ZZ # CUSHIONING REQUIREMENT: A-A-59136, CLASS 1, GRADE B, MINIMUM DENSITY: 1.7 pounds per cubic feet, MAXIMUM DENSITY: 2.2 pounds per cubic feet. CUSH/DUNN THKNESS: Z Cushioning thickness will be at least 1/8 of an inch thicker than the length of the component's leads. In lieu of these requirements, components can be placed in ESD protective form fitting containers that immobilize and maintain the original configuration of the leads. Additional anti-static cushioning may be applied to protect the component.
SPE7M5-26-T-367Z
SECTION B
PR: 7017695577 PRLI: 0001 CONT’D
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PARCEL POST ADDRESS:
SW0700
DLA DISTRIBUTION DDWO
3990 EAST BROAD ST BLDG 11 SEC 8
STORAGE AND DISTRIBUTION DETACHMENT
COLUMBUS OH 43213
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW0700
DLA DISTRIBUTION DDWO
3990 EAST BROAD ST BLDG 11 SEC 8
STORAGE AND DISTRIBUTION DETACHMENT
COLUMBUS OH 43213
US
Need Ship Date:06/28/2027 Original Required Delivery Date:06/28/2027
SPE7M5-26-T-367Z NSN/Part Number: 5962-01-199-9390 Quantity: 6 EA Purchase Request: 7017695577QTY: 6 Delivery: 314 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334413
New
DIBBS
STRIP, ELECTRICAL GROUN
Solicitation # SPE7M1-26-U-5023
The contract pertains to the procurement of electrical grounding strips under solicitation SPE7M1-26-U-5023, with a total quantity of 45 units at a unit price of $45.00, totaling $2,025.00. The item is identified by NSN 5999-01-308-8645 and is classified as a small business set-aside under NAICS code 334413. Delivery is required within 146 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s RP001 requirements, including marking per MIL-STD-129 without special markings, and palletization in accordance with specified DLA standards. Hazardous materials packaging is governed by IP025, and mercury or mercury-containing compounds are strictly prohibited unless used functionally in batteries, fluorescent lights, sensors, weapons, or chemically specified reagents by NAVSEA; portable devices with mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned the highest verification levels. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, with the controlling revision determined by the solicitation or award date. The contract is issued by the Department of Defense’s Maritime Supply Chain under the DLA Direct, CONUS delivery model, and includes multiple approved suppliers offering the same part number.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334413
New
DIBBS
DISPLAY, OPTOELECTRONIC
Solicitation # SPE7L1-26-T-916H
This contract pertains to the procurement of a commercial off-the-shelf optoelectronic display item with NSN 5980-01-727-7422 and specified part numbers GM DEFENSE LLC P/N 24002509 and GRAYHILL INC P/N 3DYY70C-305. One unit is required to be delivered within five days of order placement, with no tolerance for quantity variance. Delivery is FOB origin, and both inspection and acceptance occur at the destination. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including use of the E5 unit container, MIL-STD-129 marking under special marking code 00-00, and palletization per RP001. The item must not contain any Class I ozone-depleting chemicals, and any substitutes must be approved unless explicitly authorized by the specification. Shipping must be via fast, traceable means, excluding parcel post, to the designated military address at Fort Campbell, Kentucky. The required delivery date is August 5, 2026, and the contract is issued under solicitation SPE7L1-26-T-916H. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions controlled by the solicitation issue date. The unit of issue is per the DoD-authoritative ANSI X12 standard.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
SEMICONDUCTOR DEVICE, T
Solicitation # SPE7M5-26-T-366Y
The contract specifies the procurement of a semiconductor device, specifically a thyristor, identified by NSN 5961-01-480-5281, with a quantity of two units. The item is classified as a commercial off the shelf product, and the procurement is governed by stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The supplier must comply with qualified suppliers and testing lists for Federal Supply Class 5961 and 5962, as defined in Procurement Note M01, and adhere to physical marking standards for bare items. Packaging must meet DLA-specific requirements, and the contractor is obligated to retain full supply chain traceability documentation as mandated by DLAD Procurement Note C03 from August 2016. Additionally, government identification must be removed from any non-accepted supplies. The solicitation is issued under SPE7M5-26-T-366Y, with a response deadline of August 17, 2026, and delivery is required within 20 days after award. The place of performance is Keyport, WA, and the contracting office is the Department of Defense's Active Devices Division, with Margaret Smith as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
REGULATOR, VOLTAGE
Solicitation # SPE7M1-26-U-4896
This contract specifies the procurement of a voltage regulator identified by NSN 5963-01-548-1542 and part numbers from approved suppliers including General Dynamics Land Systems, Supacat Limited, and C E Niehoff & Co, with a total quantity of 35 units at a unit price of $35.00, resulting in a total contract value of $1,225.00. The item is classified as a critical application item and is being procured under a DLA Direct, CONUS delivery arrangement with delivery required within 89 days FOB origin, no quantity variance permitted, and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 packaging requirements, while all DLA Master List of Technical and Quality Requirements override any conflicting ASTM standards. The unit of issue is each, with the quantity per unit pack as specified, and government identification must be removed from non-accepted supplies. The solicitation is issued under contract number SPE7M1-26-U-4896 with a response deadline of August 19, 2026, and falls under a Women-Owned Small Business Set-Aside with NAICS code 334413. It is managed by the Department of Defense’s Maritime Supply Chain, with Bryan Fair listed as the primary point of contact. The contract is part of a simplified acquisition, meaning the revision of the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date governs compliance. The document is issued under DoD-authorized units of measure, and all labeling, marking, and packaging must strictly follow the referenced military and DLA specifications. The estimated quantity is not guaranteed for full purchase by the IDC, and the contract is accessible through the DIBBS platform for vendor submissions.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334413
New
DIBBS
HEATER, THERMAL RELE
Solicitation # SPE7M1-26-U-4882
The contract pertains to the procurement of two thermal release heaters identified by NSN 5999-00-504-9894 under solicitation SPE7M1-26-U-4882, with a delivery requirement of 228 days after order. The technical and quality standards governing the supply are dictated by the DLA Master List of Technical and Quality Requirements, which must be accessed via the designated DLA web portal; the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless an amendment introduces a later revision. All supplies must comply with DLA packaging requirements and are subject to provisions mandating the removal of government identification from non-accepted items and proper physical identification of bare items. The inclusion of mercury or mercury-containing compounds is strictly prohibited unless specifically excluded for functional uses in batteries, fluorescent lights, sensors, weapon systems, or chemical analysis reagents authorized by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier per NAVSEA 5100-003D. No technical or quality data is currently available, and any alternate offeror must submit a complete data package covering both the primary and alternate parts. The solicitation is issued by the Department of Defense’s Maritime Supply Chain under NAICS code 334413, with responses due by August 19, 2026, and primary point of contact information provided for Bryan Fair at the Defense Logistics Agency.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334413
New
DIBBS
LIGHT EMITTING DIODE
Solicitation # SPE7M1-26-U-4994
This contract solicits light emitting diodes under solicitation number SPE7M1-26-U-4994, issued by the Department of Defense through the Maritime Supply Chain, with a total small business set-aside designation. The item, identified by NSN 5980-01-438-3875 and part numbers 58154C5F15G5L24N1-G and 6962ED2909G PC 19A, is designated as a critical application item for avionics and naval power systems. The requirement is for 77 units at a unit price of $77.00, with zero variance allowed in quantity and delivery scheduled for 525 days after award. Delivery is FOB origin, with inspection and acceptance occurring at the destination. All supplies must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, and no mercury or mercury-containing compounds may be intentionally introduced unless explicitly exempted for specified functional uses like batteries or fluorescent lamps, which must meet additional containment and shock-proof criteria per NAVSEA standards. The contract incorporates technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. The solicitation is open for response until August 19, 2026, and all submissions must adhere to DoD unit of issue guidance.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334413
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M1-26-U-4891
This contract pertains to the procurement of a SWITCH, SENSITIVE with NSN 5930-00-636-4345 and part number MS25011-1, governed by MIL-PRF-8805K and MIL-PRF-8805/47J specifications. The item is classified as a critical application component and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicit written approval is obtained from the Contracting Officer, and mercury or mercury-containing compounds are banned from direct contact with the hardware, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents. Portable devices containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. All supplies must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with packaging code U and no special marking required. The item must be delivered FOB origin within 236 days, with no quantity variance permitted, and inspected and accepted at the destination. The contract enforces full and open competition, excludes commercial items as defined in FAR 11.001, and applies to non-manufacturers as well. The contract value is based on 90 units at $90 per unit, and the solicitation is managed under SPE7M1-26-U-4891 with a response deadline of August 19, 2026, issued by the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334413
New
DIBBS
LIGHT EMITTING DIOD
Solicitation # SPE7M1-26-U-4979
The contract pertains to the procurement of 103 light emitting diodes identified by NSN 5980-01-438-3873 under solicitation SPE7M1-26-U-4979, with a total set-aside for small businesses as defined by the SBA. The requirement is governed by DLA packaging and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions applicable based on the solicitation or award date depending on acquisition size. All offered parts must be accompanied by a complete data package including specifications for both the approved and alternate parts, with no government identification permitted on non-accepted supplies. The delivery timeline is set at 514 days after contract award, and the solicitation closes on August 19, 2026, following a posting date of August 4, 2026. The procurement is managed by the Maritime Supply Chain under the Department of Defense, with Bryan Fair listed as the primary point of contact for inquiries. The NAICS code 334413 classifies this as an electronic component manufacturing activity, and all responses must be submitted through the DIBBS system via the provided UI link.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334413
New
DIBBS
LIGHT EMITTING DIODE
Solicitation # SPE7M1-26-U-5026
This contract specifies the procurement of 65 packages of light emitting diodes, with each package containing ten diodes, for a total of 650 units. The item is identified by NSN 5980-01-524-4486 and part number BSD-1948-004 from LEDTRONICS, INC., and is classified as a critical application item. Delivery must occur within 74 days FOB origin, with no allowable quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E using Method 41 for preservation, dry climate conditions, and D3 unit containers, with marking in accordance with MIL-STD-129 and no special marking required. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. The solicitation is a Women-Owned Small Business Set-Aside under NAICS code 334413, issued by the Department of Defense’s Maritime Supply Chain under contract SPE7M1-26-U-5026, with a response deadline of August 19, 2026, and a posted date of August 4, 2026. The unit of issue is the package (PG), and pricing is at $65.00 per package, with the quantity noted as an estimate subject to change.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334413
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M0-26-T-029M
This contract specifies the procurement of electrical contacts under solicitation SPE7M0-26-T-029M with NSN 5999-00-921-0631, requiring a total of eleven units—one unit at $1.00 and ten units at $10.00 each, with delivery due within five days of contract award. All items must be delivered FOB origin to the U.S. Army supply point at Fort Riley, Kansas, with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements. Non-hazardous materials must be packaged per ASTM D3951, but DLA’s Master List of Technical and Quality Requirements overrides all other standards, including ASTM. Hazardous materials must meet IP025 requirements under FED-STD-313. The use of Class I ozone-depleting substances in manufacturing is strictly prohibited unless prior written approval is obtained from the contracting officer, with exceptions only for commercial items defined under FAR 11.001 or part-numbered-only components. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated, with attribute classifications assigned specific verification levels or AQLs. The contract references technical and quality requirements from the DLA Master List, with revisions controlled by the solicitation issuance or award date depending on acquisition size. Approved suppliers include American Micro Products, L3Harris Cincinnati Electronics, Autodyne Manufacturing, and Freehold Manufacturing Assembly, each with their respective part numbers. The required delivery date is August 3, 2026, with no need ship date specified, and all documentation must align with DoD unit of issue standards.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334413
New
DIBBS
ANALOG INPUT MODULE
Solicitation # SPE7M1-26-U-5039
The contract is for an Analog Input Module, part number BMXART0414 with NSN 5963-01-509-1052, classified as a commercial item and designated as a critical application component. It is procured under a Small Business Set-Aside, with 56 units required at a unit price of $56.00, totaling $3,136.00, and delivered FOB origin within 73 days. The item must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, including the special marking code 39 indicating ESD-sensitive electronic device. Full ESD and EMI protection is mandated using certified materials listed on QPL-81705, specifically MIL-PRF-81705 Type I and Type III barrier materials, with suppliers responsible for sourcing only from qualified manufacturers. Packaging must include proper cushioning to prevent physical damage to leads and terminals, and all handling must occur at approved protective work stations. Inspection and acceptance occur at the destination, with zero variance permitted in quantity. Technical and quality requirements are governed by the DLA Master List referenced in the contract, and all documentation must align with the revision in effect at the time of solicitation issuance.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334413
New
DIBBS
CAPACITOR, FIXED, ELECTR
Solicitation # SPE7M1-26-U-4997
This contract specifies the procurement of a fixed electrolytic capacitor with strict compliance requirements for military and government use, classified as a commercial item and subject to full and open competition. Only manufacturers approved on the Qualified Parts List at the time of bid opening or award are eligible, and the item must meet the technical specifications outlined in MIL-PRF-39018G Supplement 1A and MIL-PRF-39018/1J, with part number M39018/01-1073M. The capacitor must be shipped in accordance with MIL-STD-2073-1E packaging standards, marked per MIL-STD-129 with a special code ZZ, and include one-inch high red lettering indicating JAN CLASS S on the exterior container. Each individual unit pack must be labeled per IPC/JEDEC J-STD-609 to clearly identify lead content, and mercury or mercury-containing compounds are strictly prohibited except in specific exempted applications like certain batteries or instruments, with additional containment requirements for portable devices. All packaging and shipping of hazardous materials must comply with IP025 standards, and palletization must adhere to DLA packaging guidelines. The item is designated a critical application component with zero tolerance for non-conformances under zero-based sampling plans, and inspection and acceptance occur at the destination. The contract covers 1,145 units with a delivery window of 63 days FOB origin, no quantity variance allowed, and is issued under a total small business set-aside with a purchase request number and NSN provided for tracking and logistics.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE
Solicitation # SPE7M5-26-T-368B
The contract pertains to the procurement of a connector, receptacle with NSN 5935-01-599-8586 and part number E1022-56, sourced from J.B. Nottingham & Co Inc. The item is classified as a critical application item and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Packaging must conform to MIL-STD-2073-1E with specific preservation methods including preservative type 31, dry climate conditions, and FAA wrap material, while marking adheres strictly to MIL-STD-129 with no special marking codes applied. Palletization follows DLA Packaging Requirements for Procurement and all items are to be delivered FOB origin in exact quantities of 48 units with zero variance permitted. Delivery is required within 185 days of contract award to the DLA Distribution facility in New Cumberland, Pennsylvania, with the original and need ship date set for February 19, 2027. Inspection and acceptance occur at the destination, and transportation logistics are governed by DLA Procurement Notes C19 and C20. The contract was issued under solicitation SPE7M5-26-T-368B with a NAICS code of 334417, managed by the Department of Defense’s Active Devices Division, and the primary point of contact is Margaret Smith.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE
Solicitation # SPE7M5-26-T-367E
This contract specifies the procurement of a fixed wire resistor with part number RER55F36R5R and NSN 5905-01-134-1187, meeting technical specifications MIL-PRF-39009/2C and MIL-PRF-39009E, both dated August 5, 2022. The item is classified as a critical application component, and all manufacturing, testing, and processing procedures are prohibited from using Class I ozone-depleting substances unless explicit written approval is obtained from the Contracting Officer. The resistor must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which mandates clear identification of lead content on every unit package. Delivery is required within ten days of contract award, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination. The sole quantity ordered is one unit, shipped via traceable freight methods excluding parcel post to the designated military address at Fort Benning, Georgia. All performance, material, and marking requirements are governed by referenced military specifications and DLA master lists, with no exceptions permitted unless formally approved.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR BODY, RECE
Solicitation # SPE7M5-26-T-367P
This contract specifies the procurement of a connector body receptacle with part number 5935-00-892-3059, requiring one unit to be delivered within 20 days to the destination FPO AE 09578 aboard the USS McFaul DDG74. The item is classified as a critical application and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless explicit written approval from the contracting officer is obtained, and mercury or mercury-containing compounds are banned from direct contact with the hardware except in limited, specially defined cases such as functional mercury in batteries or fluorescent lights, which must include a secondary containment boundary. Compliance with MIL-STD-1916 or equivalent zero-based sampling plans is required for inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or corresponding AQLs, and acceptance must result in zero non-conformances unless otherwise stated. Packaging, marking, and preservation must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-55330, with special marking code 00-00 indicating no additional requirements. The delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur upon receipt at the destination. The contract also mandates adherence to Department of Defense transportation protocols, including specific procedures for vessel and DLA vendor shipments, and includes designated government-use fields for tracking and logistics compliance.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
COVER, ELECTRICAL CO
Solicitation # SPE7M5-26-T-367F
The contract specifies the procurement of three electrical cover units with NSN 5935-01-534-4832 and part number 660-012NF15U6-106, under solicitation SPE7M5-26-T-367F, with a required delivery within 20 days of award. The item is to be delivered FOB destination, with no tolerance for quantity variance, and inspected and accepted at the delivery point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is not classified as hazardous per FED-STD-313, it must be commercially packaged per SPE7M5-26-T-367F and palletized per RP001 requirements. Government identification must be removed from non-accepted supplies, and all items must be physically identified per RQ017. Delivery is directed to MALS-12 at MCAS Iwakuni, Japan, with a secondary parcel post address at FPO AP 96310-7161. Transportation logistics follow DLAD Proc Note C19 for vessel shipment and C20 for first destination transport. The original required delivery date is July 30, 2026, and the contract is issued under a federal solicitation managed by the Department of Defense’s Active Devices Division with point of contact Margaret Smith.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
RADOME, POLARIZER
Solicitation # SPE7M5-26-Q-0829
The contract is for the procurement of 12 units of a RADOME, POLARIZER with NSN/Part Number 5985-01-157-5180 under solicitation SPE7M5-26-Q-0829, which is a total small business set-aside under NAICS code 334220. The offering is issued by the Department of Defense’s Active Devices Division, with a response deadline of August 19, 2026, and requires delivery within 463 days after order. The technical and quality requirements governing this acquisition are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Access to the controlled technical data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been approved by DLA. Configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. The contract also mandates CMMC Level 2 certification from third-party assessment organizations for cybersecurity compliance and incorporates DLA packaging standards for procurement.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334220
New
DIBBS
AMPLIFIER, RADIO FRE
Solicitation # SPE7M5-26-T-078D
The contract solicits two units of a radio frequency amplifier identified by NSN 5996-01-464-6320 with a delivery requirement of 168 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The solicitation incorporates DLA packaging requirements and applies to covered defense information, requiring compliance with all cited technical data even if incomplete. Configuration changes must follow formal Engineering Change Proposal and Variance procedures, and any non-accepted supplies must have government identification removed prior to submission. The solicitation number is SPE7M5-26-T-078D, issued on August 4, 2026, with responses due by August 7, 2026, under NAICS code 334220, and performance is required at Tinker AFB with a zip code of 73145-8000. Primary point of contact is Jeanette Heisey, reachable via email and phone provided.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-367K
The contract pertains to the procurement of twelve antennas under NSN 5985-99-671-2175, with a delivery requirement of 234 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision active on the RFP issue date unless amended. Alternate offerors must submit a complete data package including documentation for both the approved and alternate parts. The solicitation numbers SPE7M5-26-T-367K was posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 334220, and is managed by the Department of Defense’s Active Devices Division. The point of contact is Matthew Stanko, reachable at fmtewiq@dla.mil or 312-850-7245, and performance is to occur in New Cumberland, Pennsylvania, 17070-5002.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-367D
This contract is for the procurement of one cartridge fuse, identified by NSN 5920-01-368-3718 and commercial part numbers JJN-60 from Cooper Bussmann, LLC and 128311013 from Eaton Corporation, categorized as a commercial off-the-shelf item. The requirement is governed by DLA packaging standards under MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required and packaging configured for dry storage without cushioning or intermediate containers. Delivery is due within 20 days from the contract date, FOB origin, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be shipped to the designated military logistic site in Soto Cano, Honduras, and is subject to DLA transport protocols, including procurement notes C19 and C20 for freight handling. The procurement is issued under solicitation SPE7M5-26-T-367D, with a response deadline of August 17, 2026, and a required delivery date of July 30, 2026. Technical and quality requirements referenced via R and I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. The unit of issue is each, priced at $1.00, totaling $1.00 for the single unit. The point of contact is Matthew Stanko, and the solicitation is managed by the Department of Defense’s Active Devices Division. Government-use identifiers and logistical codes are embedded in the shipment data, and the item must comply with all hazardous materials transportation guidelines as outlined in DLA procedural notes, despite not being classified as hazardous.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M5-26-T-367U
This contract specifies the procurement of an electrical contact receptacle with part number GUA1 and NSN 5999-01-710-3143, requiring exactly 30 units to be delivered within 10 days under FOB origin terms. The delivery must be made to the address in Dublin, California, with strict adherence to MIL-STD-2073-1E packaging and MIL-STD-129 marking standards and DLA packaging requirements, excluding any special marking. Shipment must use the fastest traceable method, prohibiting parcel post, and palletization must comply with DLA guidelines. The item is classified under NAICS code 334419, issued by the Department of Defense’s Active Devices Division, and is subject to federal acquisition regulations including prohibitions on ozone-depleting substances and intentional mercury contamination, with exceptions for specific functional uses such as batteries, fluorescent lights, and instrument controls as per NAVSEA standards, which also mandate secondary containment for mercury-containing portable devices. Only approved manufacturers may submit replacements, requiring formal documentation for evaluation, and administrative changes or superseding items are not accepted without prior approval. The contract enforces a zero variance in quantity, with inspection and acceptance occurring at the destination. Payment is set at $30 per unit, totaling $900, and the response deadline for proposals is August 17, 2026, with a required delivery date of July 29, 2026.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
COVER, ELECTRICAL CO
Solicitation # SPE7M5-26-T-367G
This contract involves the procurement of a cover for an electrical connector with part number 660-012NF21U6-208 and NSN 5935-01-549-5224, for a quantity of four units at a unit price of four dollars, totaling sixteen dollars. Delivery is required within twenty days to the destination FPO AP 96310-7161 under FOB destination terms, with no tolerance for quantity variance. The item must comply with strict packaging and preservation standards as defined by MIL-STD-2073-1E and MIL-DTL-55330 for connectors, and marking must conform to MIL-STD-129 with no special marking code. All packaging and palletization must meet DLA’s procurement requirements, and the use of any Class I ozone-depleting substances in manufacturing, testing, or cleaning is strictly prohibited unless written approval is secured from the contracting officer—a restriction that overrides any conflicting specification but does not lessen performance obligations. The item is subject to inspection and acceptance at the delivery point, and transportation logistics follow specific DLA procedural notes C19 and C20. The solicitation number is SPE7M5-26-T-367G, issued by the Department of Defense’s Active Devices Division, with a response deadline of August 17, 2026, and an original required delivery date of July 30, 2026. Technical and quality requirements referenced under R or I numbers are governed by the DLA Master List, and the applicable revision depends on whether it is a simplified or large acquisition as defined by solicitation and award timelines.
Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY ASSEMBLY GROU
Solicitation # SPE7M5-26-T-367X
The contract pertains to the procurement of 83 units of Relay Assembly Group, identified by NSN 5945-01-193-3854 and part number PL2054, under solicitation SPE7M5-26-T-367X, with a total unit price of $83.00 per unit and a total contract value of $6,889.00. Delivery is required FOB origin within 188 days of contract award, with no variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, with marking in strict accordance with MIL-STD-129 and the additional requirement to apply IPC/JEDEC J-STD-609 lead finish markings to each individual unit package to indicate Pb or Pb-free status. The item is designated as a Critical Application Item, and all government identification must be removed from non-accepted supplies. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD procedural notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 335314, with a response deadline of August 17, 2026, and technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date.
Relay and Industrial Control Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details