Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MICROCIRCUIT, LINEAR

Active
SPE7M5-26-T-399KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of a linear microcircuit identified by NSN 5962-01-031-6853, with a quantity of four units, under solicitation SPE7M5-26-T-399K. The item is classified under Federal Supply Class 5962 for electronic microcircuits and is subject to strict qualification requirements outlined in Procurement Note M01, which mandates that only suppliers listed on the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List may supply this item. The microcircuit must comply with detailed technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date, depending on the acquisition size. Physical identification, bare item marking, and DLA-specific packaging standards are mandatory, and the contractor must retain complete supply chain traceability documentation in accordance with DLAD Procurement Note C03 from August 2016. The delivery is required within 165 days after award, and the place of performance is Columbus, Ohio, with the Department of Defense’s Active Devices Division as the procuring agency. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and the primary point of contact is Margaret Smith, reachable via email and phone provided. An alternate offeror must provide a full data package including specifications for both the approved and alternate part, as no existing data is available.

General Info

Procure four NSN 5962-01-031-6853 microcircuits, qualified suppliers only, deliver to Columbus, Ohio within 165 days.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334413 - Semiconductor and Related Device ManufacturingView NAICS

Place of Performance

STORAGE AND DISTRIBUTION DETACHMENT, COLUMBUS, OH, 43213, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M5-26-T-399K for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Margaret Smith
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MICROCIRCUIT,LINEAR
MICROCIRCUIT,LINEAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ014: QUALIFIED SUPPLIERS LIST OF DISTRIBUTORS (QSLD) AND QUALIFIED
TESTING SUPPLIERS LIST (QTSL) FOR FEDERAL SUPPLY CLASS (FSC) 5961
SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS. THIS IS A QUALIFIED ITEM. QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE M01 "QUALIFIED SUPPLIERS FOR FEDERAL SUPPLY CLASS (FSC)
5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS" APPLY.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR NSN/Part Number: 5962-01-031-6853 Quantity: 4 EA Purchase Request: 7017779614QTY: 4 Delivery: 165 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITA
Solicitation # SPE7M5-26-T-398A
This contract is for the procurement of five units of a commercial off-the-shelf microcircuit, specifically identified as Fairchild Semiconductor Corp part number DM7407M under Federal Supply Class 5962 for electronic microcircuits. The item must fully comply with stringent technical, quality, and packaging requirements mandated by the Defense Logistics Agency, including adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and IPC/JEDEC J-STD-609 for lead finish labeling on each individual unit pack. Supply chain traceability is mandatory, with contractors required to retain documentation per DLA Procurement Note C03 and submit completed DLA Land and Maritime Form 918 electronically at least 15 days prior to delivery, obtaining written authorization before shipment. Each shipment must include a paper copy of the form and approval confirmation inside the packaging, with strict penalties for noncompliance including payment withholding. The item must be free from intentional mercury or mercury compounds, except under specific exemptions outlined by NAVSEA, and portable devices containing mercury must have shockproof construction with a secondary containment barrier. ESD and EMI protection is required per MIL-PRF-81705, using qualified barrier materials from the QPL-81705 list, with cushioning meeting A-A-59136 standards unless replaced by form-fitting ESD-safe containers. Traceability documentation must be formatted per specified naming conventions and compressed to under 15 MB per email. The delivery is FOB origin with a 147-day lead time, inspection and acceptance occur at destination, and no quantity variance is permitted. All packaging and marking must conform to DLA standards, with final delivery directed to the DLA Distribution facility in Columbus, Ohio.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
SEMICONDUCTOR DEVIC
Solicitation # SPE7M5-26-T-397E
The contract pertains to the procurement of a single semiconductor device identified by NSN 5961000589337 and part number GS79W23, with a required delivery of five days FOB origin and no variance allowed in quantity. All items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific directives for supply chain traceability under DLA Procurement Note C03 and qualified supplier requirements for Federal Supply Classes 5961 and 5962. The contractor must ensure physical identification and packaging conform to MIL-STD-2073-1E and MIL-DTL-19491, with labeling strictly adhering to MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish marking on each unit pack. Traceability documentation must be retained by the contractor, and government identification must be removed from non-accepted supplies. The item is subject to Covered Defense Information requirements and must be shipped via traceable means, excluding parcel post, to Fort Bragg, North Carolina. The contract stipulates inspection and acceptance occur at the destination, and surplus material is not acceptable. The purchase request number is 7017784207, with a required delivery date of August 6, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
SEMICONDUCTOR DEVIC
Solicitation # SPE7M5-26-T-396N
The contract pertains to the procurement of a semiconductor device specifically a diode identified by NSN 5961-01-269-3123 with a quantity of one unit. Performance is required within five days of delivery order issuance and the solicitation is issued under contract number SPE7M5-26-T-396N with a response deadline of August 20, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible online with revisions in effect on the solicitation issue date or award date depending on acquisition size. Compliance is mandatory for qualified suppliers listed under the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List for Federal Supply Class 5961 and 5962. The part must be physically marked per RQ017 standards and packaged according to DLA packaging norms. The contractor is obligated to retain supply chain traceability documentation in alignment with DLAD Procurement Note C03 from August 2016 to ensure authenticity and origin integrity. Government identification must be removed from non-accepted supplies. As no data package is available, the offeror must submit complete technical and operational data for both the primary and any alternate part. The contract is managed by the Department of Defense’s Active Devices Division with performance at Robins AFB, Georgia, and primary point of contact is Margaret Smith.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITA
Solicitation # SPE7M5-26-T-397W
This contract pertains to the procurement of a digital microcircuit identified by NSN 5962-01-078-3730, classified under Federal Supply Class 5962 for electronic microcircuits, and specified as a commercial item. The supplier must comply with stringent technical, quality, and traceability requirements derived from the DLA Master List of Technical and Quality Requirements, including mandatory configuration change management, qualification under the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List, and physical identification standards for bare items. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03 and submitted with each shipment via DLA Land and Maritime Form 918, which must be emailed to the designated address at least 15 days prior to delivery and approved in writing before any shipment can occur. The documentation must adhere to strict naming conventions, file size limits, and must match exactly what was submitted for approval to avoid payment denial. The item must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with special attention to ESD and EMI protection as mandated by MIL-PRF-81705, requiring certified barrier materials from qualified manufacturers listed on QPL-81705. Lead finish markings must comply with IPC/JEDEC J-STD-609, applied per section 5.3 and placement guidelines in section 6.2. Cushioning must meet A-A-59136, Class 1, Grade B standards with densities between 1.7 and 2.2 pounds per cubic foot and a minimum thickness exceeding lead length by 1/8 inch, or be replaced by form-fitting ESD-protective containers that immobilize components. The contract prohibits intentional addition of mercury or mercury compounds except for specified exceptions, requiring shock-proof containment for any exempted items. Delivery is FOB origin with no variance allowed on quantity, inspection and acceptance occur at destination, and the required delivery date is 165 days from the contract award, with a need ship date of February 2, 2027. The contractor must also maintain a CMMC Level 2 self-assessment and ensure all documentation is transmitted and stored in compliance with the contract’s cybersecurity and data handling obligations.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
DUMMY LOAD, ELECTRIC
Solicitation # SPE7M5-26-T-398H
The contract is for the procurement of 40 electric dummy loads identified by NSN 5985-01-185-6226, issued under solicitation SPE7M5-26-T-398H by the Department of Defense’s Active Devices Division. Delivery is required within 119 days after award, with responses due by August 20, 2026. The technical data associated with this item is subject to U.S. export controls under either ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, including those within the United States. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with an approved US/Canada Joint Certification Program certification, completion of DOD export-controlled data training, and approval from DLA are permitted to access the controlled technical data. The place of performance is New Cumberland, PA, with the primary point of contact being Daniel Zimmerman, reachable via email and phone provided. The contract falls under NAICS code 334413 and does not specify a set-aside classification.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITA
Solicitation # SPE7M5-26-T-397N
This contract pertains to the procurement of a digital microcircuit designated by NSN 5962-01-461-0112 and part number 331232-50, with a total quantity of six units to be delivered within 248 days from the contract award. The item falls under Federal Supply Class 5962 for electronic microcircuits and is subject to stringent technical, quality, and traceability requirements mandated by the Defense Logistics Agency. All technical and quality specifications referenced through R-numbers and I-numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation or award date depending on acquisition size. The contractor must comply with qualified supplier, packaging, and marking standards, including adherence to MIL-STD-129 for labeling and ASTM D3951 for packaging, unless superseded by higher-priority DLA directives. Supply chain traceability is strictly enforced under DLA Procurement Note C03, requiring the contractor to retain and submit detailed documentation for each lot shipped. The DLA Land and Maritime Form 918 must be completed, electronically submitted at least 15 days prior to delivery, and approved by the contract administrator before any shipment is authorized. Each package must include a printed copy of the form and written shipment authorization. Digital submissions must be under 15 megabytes, compressed as ZIP files, and named according to a prescribed format linking the documentation type, contract number, CLIN, and NSN. Individual unit packs must be marked in accordance with IPC/JEDEC J-STD-609 to indicate lead content, and all packaging must comply with palletization and labeling standards. The delivery is FOB origin to a designated DLA distribution facility in Columbus, Ohio, with no tolerance for surplus stock, and payment is contingent upon full compliance with all traceability, documentation, and packaging requirements.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITAL
Solicitation # SPE7M5-26-T-398E
The contract specifies the procurement of a digital microcircuit under Federal Supply Class 5962, with the part number LT1720IMS8 and NSN 5962-01-595-5577, for a quantity of 83 units at a unit price of $83.00, totaling $6,889. Delivery is required within 165 days from the contract award, with FOB origin and inspection and acceptance occurring at destination. The item is subject to stringent quality and traceability controls, including compliance with DLA Master List technical and quality requirements identified by R or I numbers, qualification under the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List, and adherence to Procurement Note M01 for qualified suppliers. Supply chain traceability documentation must be retained by the contractor as outlined in DLAD Procurement Note C03, and a completed DLA Land and Maritime Form 918, along with unredacted traceability or test reports, must be submitted electronically at least 15 days before delivery for government review and written shipment authorization; failure to comply may result in non-final payment. All unit packages must be marked in accordance with IPC/JEDEC J-STD-609 to identify lead content, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code ZZ for ESD sensitivity. ESD and EMI protection is mandatory using materials approved under MIL-PRF-81705 sourced from qualified manufacturers listed on QPL-81705, with specific cushioning requirements per A-A-59136 and lead protection protocols. The contractor must also meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and ensure all packaging, preservation, and handling procedures are followed to prevent damage during transit. Final delivery is directed to DLA Distribution in Columbus, Ohio, and the original required delivery date is May 1, 2027, with a need ship date of February 2, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
HOLDER, SEMICONDUCTO
Solicitation # SPE7M5-26-T-398G
This contract pertains to the procurement of 17 units of a semiconductor item identified by NSN 5961-01-061-3725 under solicitation SPE7M5-26-T-398G, with a delivery deadline of 165 days after award. The item is classified under Federal Supply Class 5961 and is subject to stringent qualification requirements mandating supplier inclusion on the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List for semiconductors and electronic microcircuits. All supplies must comply with the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must conform to DLA Directive Procurement Notes including C03 regarding the retention of supply chain traceability documentation. The contractor is required to apply specific lead finish markings on each unit package in accordance with IPC/JEDEC J-STD-609, ensuring clear identification of Pb-free or other attributes, with proper placement per the standard’s guidelines. Packaging and marking must adhere to federal standards for FSC 5961 and 5962 items, and all government identification must be removed from non-accepted supplies. Surplus items are explicitly not acceptable, and the offeror must submit a complete data package for both the approved and alternate parts. The solicitation is open for response until August 20, 2026, and performance is expected at New Cumberland, Pennsylvania.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
DISK DRIVE UNIT
Solicitation # SPE7M5-26-T-398R
The contract is for the procurement of two disk drive units classified under Federal Supply Class 5962 as electronic microcircuits, with the NSN 7025-01-660-8878, and is designated as a commercial off-the-shelf item. The procurement is governed by strict technical and quality requirements tied to the DLA Master List, including mandatory supply chain traceability documentation per DLA Procurement Note C03, and requires compliance with DLA Land and Maritime Form 918 for traceability and test reports, which must be submitted via email no later than 15 days prior to delivery and receive explicit written authorization before shipment. Each shipment must include a printed copy of the completed form and the authorization confirmation within the packaging, and failure to comply renders payment non-final. The contractor must follow strict packaging and marking rules per IPC/JEDEC J-STD-609 for lead finish identification and adhere to DLA packaging standards. The item is subject to export controls under ITAR or EAR, restricting data sharing with foreign persons and requiring contractors to hold JCP certification, complete required DOD training, and receive DLA approval to access controlled technical data. Additionally, the contractor must retain all supply chain documentation and comply with qualified supplier and testing lists for FSC 5961 and 5962, as well as remove government identification from non-accepted supplies. The solicitation number is SPE7M5-26-T-398R, with a response deadline of August 20, 2026, delivery due in 273 days, and the place of performance is New Cumberland, Pennsylvania.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M5-26-T-397G
The contract specifies the procurement of a circuit breaker identified by part number M83383/04-10, manufactured in strict compliance with MIL-PRF-83383F(1) and referenced technical documents including QAP-14153 and QPL-83383-16. This is a critical application item requiring use of only qualified manufacturers listed on the Qualified Products List; commercial substitutes are prohibited without prior written government approval. The item must meet all applicable DLA Master List of Technical and Quality Requirements, which supersede general standards like ASTM D3951. Use of ozone-depleting substances in any phase of design, manufacturing, or cleaning is strictly prohibited unless explicitly approved in writing by the contracting officer. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging requirements, with hazardous materials following Fed-Std-313 and TQ requirement IP025, while non-hazardous items must be packaged commercially under DLA-controlled standards. The unit of issue is each (EA), with a total quantity of 29 units at a unit price of $29.00, totaling $841.00. Delivery is required FOB origin within 465 days of contract award, with inspection and acceptance occurring at destination. The designated delivery address is DLA Distribution Warner Robins at Robins AFB, Georgia, with a required ship date of November 29, 2027, and original delivery deadline of January 7, 2028. All components are subject to defense information controls and procurement note H02 regarding qualified product sourcing.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
ELECTRONIC COMPONEN
Solicitation # SPE7M5-26-T-399Q
This contract mandates the supply of two electronic components identified by NSN 5998-01-595-5230 and part number W155121W, sourced from Siemens Energy Inc. and Curtiss-Wright Electro-Mechanical, under solicitation SPE7M5-26-T-399Q. The delivery is required within 151 days from the contract award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must fully comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including strict adherence to MIL-STD-129 marking standards. Special ESD and EMI protection is mandated, requiring MIL-PRF-81705 Type I and Type III barrier materials, with all packaging sourced exclusively from qualified manufacturers listed on QPL-81705. The components are classified as critical application items and ESD-sensitive, necessitating full ESD and physical protection for leads and terminals, even when not explicitly stated in packaging codes. The supplier must ensure compliance with DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers and must complete a CMMC Level 2 Self-Assessment. The item must be delivered to DLA Distribution San Joaquin in Tracy, CA, by January 19, 2027, with an original required delivery date of November 20, 2026. All handling, packaging, and shipment must conform to DLA-specific transportation protocols and preserve government identification only on accepted supplies.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITAL
Solicitation # SPE7M2-26-T-6161
This contract is for the procurement of 11 digital microcircuits under Federal Supply Class 5962, with a total price of $11.00 per unit and a delivery requirement of 165 days from the contract award, FOB origin. The item is designated as a critical application component with specific technical documentation tied to Basic Drawing 67268, Revision F dated 08/19/2024, and must conform to exact product definitions that include authorized manufacturer CAGE codes and part numbers. Traceability and test documentation are mandatory and must be submitted via the DLA Land and Maritime Form 918 no later than 15 days before delivery, with written government approval required prior to shipment. Each shipment must include a paper copy of the approved form and authorization letter, and noncompliance renders payment non-final. All packaging must adhere to MIL-STD-2073-1E and DLA packaging directives, with special requirements for ESD and EMI protection under MIL-PRF-81705 using qualified materials listed on QPL-81705, including cushioning that meets A-A-59136 Class 1 Grade B standards and thickness exceeding lead length by at least 1/8 inch. Component lead finish markings must comply with IPC/JEDEC J-STD-609 and be applied to every unit pack. Mercury and mercury compounds are strictly prohibited except in specific exempted applications, and all supplies must be free of surplus. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and supply chain traceability records must be retained per DLA Procurement Note C03. Marking must follow MIL-STD-129 with special code ZZ, and all shipments must be addressed to the specified DLA Distribution facility in Columbus, Ohio.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data SupportThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets for hazardous materials in full compliance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200 standards. This effort is critical to ensure proper identification, handling, and communication of hazards associated with materials used or supplied under the agreement, with strict adherence to federal regulatory requirements for workplace safety and defense contracting. All documentation must be accurate, up to date, and formatted in accordance with the specified guidelines to meet military and occupational safety protocols. This subcontract, issued by the Active Devices Division of the Department of Defense, falls under NAICS code 541620, indicating it involves scientific and technical consulting services related to safety and regulatory compliance. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The performance location and point of contact details are not specified, but the work must be executed to support the defense supply chain’s safety and regulatory obligations. Interested parties must respond through the designated DIBBS system portal before the deadline to be considered for award.
Environmental Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging, marking, and labeling services strictly in compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all military-grade requirements are met for the storage, handling, and transport of equipment and materials. This includes accurate bar-coding for logistics tracking and proper hazardous material labeling as mandated by applicable regulations, with full attention to detail to support military supply chain integrity and safety protocols. All work must be performed under the specifications of these standards without exception to ensure seamless integration into Department of Defense logistics systems. The contract is classified as a subcontract under NAICS code 493190 and is issued by the Active Devices Division of the Department of Defense. It was posted on August 9, 2026, with responses due by August 20, 2026, and is accessible through the DIBBS platform. There is no set-aside designation specified, and performance location details are not provided, indicating flexibility in execution site as long as deliverables meet federal standards. The contractor must be fully prepared to handle the technical and regulatory demands of military packaging and labeling, with an emphasis on precision, compliance, and documentation accuracy throughout the process.
Other Warehousing and Storage

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
Electronic Shielding Gasket ManufacturingThe contract pertains to the manufacture and delivery of three units of EMI shielding gaskets, identified by NSN 5999-01-680-5759 and part number PG632000-05, all of which must fully comply with Department of Defense technical and military specifications. The work is classified as a subcontract under NAICS code 334419, indicating it falls within the category of other electronic component manufacturing. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is managed by the Active Devices Division under the Department of Defense. There is no specified set-aside type, and the place of performance and point of contact details are not provided in the data, though all deliverables must meet the stringent standards required for military applications. The contract is accessible via a public DIBBS platform link for further submission and reference.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Transportation LogisticsThe contract requires the transport of finished connector assemblies from the manufacturer to DLA Distribution in New Cumberland, Pennsylvania, under FOB Origin terms, meaning the buyer assumes responsibility once the goods leave the manufacturer’s location. All transportation must comply with U.S.-flag vessel requirements when sea transport is involved, ensuring adherence to maritime regulations and domestic shipping mandates. The work is classified under NAICS code 484220 for support activities for truck transportation, indicating the primary focus is on logistics coordination rather than manufacturing. As a subcontract awarded by the Department of Defense’s Active Devices Division, this effort supports critical defense supply chain operations. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is intended for subcontractors participating in a broader logistics arrangement. The place of performance is clearly identified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and while no specific point of contact is listed, the contract can be accessed via the DIBBS procurement portal. No set-aside provisions are specified, meaning all eligible contractors may respond. This contract emphasizes timely and compliant delivery of sensitive defense components, requiring precise coordination across domestic and international shipping lanes while meeting U.S. maritime laws for oceanic segments of the supply route.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 811212
New
DIBBS
MIL-STD-129 Marking and BarcodingThis contract requires the application of MIL-STD-129 compliant marking and barcoding to all shipments, ensuring that both hazardous and non-hazardous items are properly labeled with machine-readable barcodes and standard shipping labels as mandated by U.S. Department of Defense standards. The work must be performed at the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation is classified as a subcontract under NAICS code 811212, indicating a focus on commercial and industrial machinery and equipment repair and maintenance services. Responses must be submitted by August 20, 2026, with the opportunity posted on August 9, 2026, through the DIBBS portal under solicitation number SPE7M526T399N. The contracting entity is the Active Devices Division within the Department of Defense, and the requirement is critical for ensuring uniformity, traceability, and compliance in military logistics and supply chain operations.
Computer and Office Machine Repair and Maintenance

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339920
New
DIBBS
MIL-SPEC Packaging and Preservation ServicesThe contract requires the provision of packaging and preservation services for connector assemblies that fully comply with MIL-STD-2073-1E and MIL-DTL-55330 specifications. This includes implementing dry climate control measures to protect components from moisture damage, applying preservation method ZZ for long-term corrosion resistance, and ensuring all unit containers meet the stringent D3 requirements for durability, labeling, and environmental protection during storage and transit. The work must be performed to exact military standards with documented verification of compliance at every stage of the packaging process. Deliverables are to be supplied to the Department of Defense’s Active Devices Division, with performance occurring at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation is structured as a subcontract under NAICS code 339920, and responses must be submitted by the deadline of August 20, 2026. The contract focuses exclusively on technical adherence to military packaging specifications, with no indication of set-aside provisions or specific small business preferences, and the primary emphasis is on quality control, documentation, and strict conformance to all referenced military standards.
Sporting and Athletic Goods Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
Manufacture of Qualified Electrical Connector AssembliesThe contract requires the manufacture of 58 military-spec electrical plug connectors designated as NSN 5935010411338 and model MS3406D18-1E, fully compliant with SAE AS50151 and AS34061 standards and qualified under the QPL H01 listing. All units must meet stringent environmental regulations prohibiting the use of mercury and ozone-depleting substances to ensure regulatory and operational compliance. The connectors are intended for defense applications and must be produced to exacting technical specifications to guarantee performance under extreme conditions. The solicitation, issued by the Department of Defense’s ACTIVE DEVICES DIVISION, is classified as a subcontract with a response deadline of August 20, 2026, and was posted on August 9, 2026. The North American Industry Classification System code is 334417, indicating the scope falls under semiconductor and other electronic component manufacturing. Performance is required at New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, though no specific point of contact or set-aside details are provided. All submissions must be made through the DIBBS portal using the provided UI link.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 312230
New
DIBBS
Military Packaging and Preservation ServicesThe contract requires the packaging, preservation, and marking of electrical connectors in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all components are protected against environmental degradation through the use of moisture barriers and desiccants. Serialized traceability labels must be applied to each item to support full lifecycle identification and inventory control. Work must be performed at the designated place of performance in Jacksonville, Florida, with delivery and compliance obligations tied to the response deadline of August 20, 2026. This is a subcontract opportunity under NAICS code 312230, issued by the Department of Defense’s Active Devices Division, and is intended for contractors capable of meeting stringent military-grade packaging and documentation requirements without deviation.
Tobacco Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks specialized services to provide hazard warning labels and compliance documentation for hazardous materials used in packaging, with strict adherence to OSHA’s Hazard Communication Standard, the Globally Harmonized System of Classification and Labeling of Chemicals, and the Defense Federal Acquisition Regulation Supplement requirements. All deliverables must meet federal regulatory standards to ensure safe handling, transport, and use of hazardous substances within Department of Defense supply chains. The work is performance-based and requires accurate labeling, multi-language compliance materials, and documentation that aligns with current regulatory frameworks and DoD procurement policies. Performance of this subcontract is specifically tied to Jacksonville, Florida, with a response deadline of August 20, 2026, and an issuance date of August 9, 2026. The North American Industry Classification System code 541690 indicates this is for other scientific and technical consulting services, highlighting the expertise needed in regulatory compliance and hazardous materials management. The contracting activity falls under the Active Devices Division of the Department of Defense, emphasizing the critical nature of these services for defense-related equipment and systems. Suppliers must demonstrate proven experience in meeting federal compliance standards and delivering accurate, traceable, and auditable labeling systems tailored to military logistics environments.
Other Scientific and Technical Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334332
New
DIBBS
Electrical Connectors Supply (NSN 5935010589244)The contract calls for the supply of 1,157 units of electrical connectors identified by NSN 5935010589244, requiring full manufacturing or sourcing capabilities to meet military specifications. The scope includes comprehensive quality assurance protocols, proper packaging and labeling in accordance with defense standards, and guaranteed delivery timelines to the designated performance location in Jacksonville, Florida, with zip code 32212-0103. All work must align with applicable military requirements ensuring reliability, durability, and interoperability in operational environments. The solicitation is structured as a subcontract under NAICS code 334332, reflecting the electronic component manufacturing sector, and is administered by the Active Devices Division within the Department of Defense. The opportunity was posted on August 9, 2026, with a firm response deadline of August 20, 2026. Bidders must be prepared to comply with all defense logistics and contractual obligations tied to the DLA’s procurement framework, and must submit proposals via the designated DIBBS platform before the closing date to be considered.

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling
Other Scientific and Technical Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC Assessment Support
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details