Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Aviation Component Packaging and Shipping

Active

Federal

Response Deadline10/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for MIL-SPEC Aviation Component Packaging and Shipping involves providing specialized packaging, marking, and labeling services for prime contractors supporting DLA supply contracts. The scope of work requires strict adherence to MIL-STD-129 for marking and labeling, ASTM D3951 for non-hazardous materials, and TQ IP025 and FED-STD-313 for hazardous materials. All items must be processed using MIL-SPEC packaging materials to ensure compliance for FOB Origin shipping. The project entails the delivery of two packaged units to the DLA Distribution Depot, with the place of performance located at Tinker AFB. Managed under the Department of Defense through the DLA Weapons Support Supplier Oper Supplier SPT Div, the contract falls under NAICS code 488510. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026.

General Info

MIL-SPEC aviation packaging and shipping services for DLA units at Tinker AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT SUPPLIER OPER SUPPLIER SPT DIV

NAICS

488510 - Freight Transportation Arrangement

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A4-27-T-0002.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

LIGHT, COCKPIT, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT SUPPLIER OPER SUPPLIER SPT DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT SUPPLIER OPER SUPPLIER SPT DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging, marking, and labeling for prime contractors delivering DLA supply contracts. Marks and labels components per MIL-STD-129, packages non-hazardous materials per ASTM D3951, and handles hazardous materials per TQ IP025 and FED-STD-313. Utilizes MIL-SPEC packaging materials for FOB Origin shipping to Tinker AFB. Delivers two units packaged and shipped to the DLA Distribution Depot.

Similar Contracts

Same NAICS industry code

Hazardous Materials Packaging and Freight ServicesThis subcontract for Hazardous Materials Packaging and Freight Services supports prime contractors delivering supply contracts to DLA DIST SAN JOAQUIN. The scope of work involves specialized packaging and marking of battery-containing items in compliance with FED-STD-313 and TQ requirement IP025, as well as applying labeling according to MIL-STD-129. The selected provider is responsible for coordinating first destination transportation and ensuring all shipments are certified as hazmat-compliant. The opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 488510. Performance will take place in Tracy, California, for the Department of Defense. Interested parties must respond by October 26, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services involves providing specialized military-grade packaging, marking, and labeling for prime contractors supporting Department of Defense projects under DLA Troop Support Construction and Equipment. The scope of work focuses on the handling of sensitive electronic hardware, requiring strict adherence to ASTM D3951 packaging standards and MIL-STD-129 marking and labeling requirements to ensure all shipments are ready for destination acceptance. The service provider is responsible for coordinating the final delivery of these materials to DLA Distribution DDSP in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 488510 and requires the delivery of fully compliant hardware that meets all specified military standards for transport and receipt.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 19 hours ago

DEADLINE

Military-Grade Packaging and Preservation ServicesThis subcontract for Military-Grade Packaging and Preservation Services involves providing specialized packaging for prime contractors fulfilling Department of Defense supply contracts. The scope of work requires the execution of packaging according to MIL-STD-2073-1E, specifically utilizing Preservation Method 10 and ZZ wrap materials. Additionally, the contractor must ensure all air purification hardware complies with QUP:001 standards, with a total delivery requirement of 51 packed and labeled units. The project is managed under NAICS code 488510 for the agency Construction & Equipment MRO SVC I. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 26, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 19 hours ago

DEADLINE

MIL-STD-129 Compliant Packaging ServicesThis subcontract involves providing specialized packaging, marking, and labeling services for prime contractors fulfilling DLA supply contracts. The scope of work requires the packaging of five pressure tanks in strict accordance with ASTM D3951, marking and labeling per MIL-STD-129, and palletization following RP001 DLA Packaging Requirements for Procurement. The completed units are to be delivered to DLA Distribution New Cumberland. This effort is managed under the Department of Defense with a designated NAICS code of 488510, and the response deadline for the solicitation is October 26, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 19 hours ago

DEADLINE

Military-Grade Packaging and ShippingThis subcontract for Military-Grade Packaging and Shipping supports prime contractors on projects for the DLA Weapons Support Land Supply Chain under the Department of Defense. The scope of work involves the specialized packaging and preparation of hardware components to ensure they are shipment-ready and compliant with DoD shipping standards for FOB Origin delivery. All work must strictly adhere to MIL-STD-2073-1E, utilizing specific cushioning, dunnage, and containers as defined by QUP .001 and Pres Mthd .10. The opportunity is categorized under NAICS code 488510, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Logistics ServicesThis subcontract for MIL-SPEC Packaging and Logistics Services involves providing military-grade packaging and shipping support for prime contractors working on DLA Troop Support projects. The selected provider must ensure all packaging adheres to MIL-STD-2073-1E and marking follows MIL-STD-129, while managing the transport of hazardous materials according to IP025 standards. The primary objective is to deliver fully compliant, palletized shipments ready for inspection to DLA Distribution New Cumberland. Managed under NAICS code 488510 for the Department of Defense, the contract requires performance in New Cumberland, Pennsylvania. Interested parties must respond by October 26, 2026, to provide these specialized logistics services for Construction and Equipment MRO SVC I.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services involves providing specialized military packaging, marking, and shipping support for prime contractors under DLA Troop Support supply contracts. The scope of work requires strict adherence to technical standards, including packaging per ASTM D3951, marking and labeling per MIL-STD-129, and the use of government wing tip pallets according to RP001. The service provider is responsible for coordinating FOB Origin shipping and ensuring the delivery of properly prepared shipments to DLA Distribution San Joaquin. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488510 for the Department of Defense. Performance will take place in Tracy, California. Interested parties must respond by October 26, 2026, to be considered for this specialized logistics and material handling requirement.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 19 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services is issued by Construction and Equipment Containers under the Department of Defense. The contractor is responsible for providing specialized packaging and palletization for prime contractors fulfilling DLA supply contracts, specifically focusing on the delivery of tanks secured on pallets and labeled for military transport. All work must be performed in New Cumberland, Pennsylvania, and must adhere to strict regulatory standards, including RP001, MIL-STD-129, ASTM D3951 for commercial packaging, and TQ requirement IP025/FED-STD-313 for hazardous materials. The opportunity was posted on October 14, 2026, with a response deadline of October 26, 2026. It falls under NAICS code 488510, covering freight transportation arrangement. Interested parties can find further details through the provided DIBBS solicitation link.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Immobilization ServicesThis subcontract involves providing specialized military packaging and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier. The scope of work requires the packaging of 140 units in strict accordance with MIL-STD-2073-1E, with a specific requirement for mandatory immobilization per paragraph .5.2.3.d. Additionally, the contractor must ensure all packages are marked according to MIL-STD-129 and Special Marking Code .ZZ, with palletization performed following RP001 standards. The project is designated as a Total Small Business Set-Aside under NAICS code 488510. Performance of the contract will take place in Tracy, California. Interested parties must note the response deadline of October 26, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services supports prime contractors on projects for the Department of Defense at the DDSP New Cumberland Facility. The scope of work involves providing specialized military-grade packaging and transportation for condensers, ensuring all materials are handled according to MIL-STD-2073-1E and DLA RP001 standards. The contractor is responsible for utilizing MIL-SPEC crates and cushioning, applying required markings per MIL-STD-129, and coordinating final delivery through the First Destination Transportation program. The project is categorized under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 26, 2026, for this specific requirement. The primary objective is the secure delivery of properly packaged and marked condensers to the designated destination facility.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

Military-Grade Packaging and Logistics ServicesThis subcontract for Military-Grade Packaging and Logistics Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing specialized packaging in accordance with ASTM D3951, marking and labeling per MIL-STD-129, and executing palletization following RP001 standards. The contractor must ensure strict compliance with Unit of Issue and Quantity per Unit Pack requirements to deliver shipment-ready hardware to DLA Distribution New Cumberland. The opportunity is a total small business set-aside under NAICS code 488510 for the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 22, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Military Specification Packaging and CratingThis subcontract opportunity, titled Military Specification Packaging and Crating, is issued by the Department of Defense through DLA DIST SAN JOAQUIN. The project requires specialized military-grade packaging, marking, and labeling services for prime contractors on DLA supply contracts. Work will be performed in Tracy, California, and is designated as a Total Small Business Set-Aside under NAICS code 488510. The selected provider must ensure all hardware is packaged according to ASTM D3951, marked per MIL-STD-129, and palletized in accordance with RP001 DLA Packaging Requirements. The scope of work involves using compliant labeling systems and military-grade crating materials to deliver shipment-ready crates. The response deadline for this opportunity is October 26, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT SUPPLIER OPER SUPPLIER SPT DIV

Same awarding agency

Aircraft Cockpit Flood Light Manufacturer (NSN 6220006354356)This subcontract involves the manufacture and supply of two finished aircraft cockpit flood lights for prime contractors supporting the Department of Defense DLA Weapons Support Supplier Oper Supplier Spt Div. The contractor is responsible for fabricating light assemblies according to NSN 6220006354356 and specific DLA Master List technical requirements RA001, RQ001, and RQ011. All products must be constructed using aviation-grade components and materials that comply with the Buy American Act. To ensure quality and compliance, the manufacturer must maintain ISO 9001:2015 certification and perform sampling in accordance with MIL-STD-1916 or ASQ H1331. The place of performance is designated as Tinker AFB. Interested parties must respond by October 21, 2026, for this requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Aerospace-Compliant Packaging and Marking ServicesThis subcontract for Aerospace-Compliant Packaging and Marking Services involves providing specialized packaging, marking, and palletization for prime contractors supporting DLA Weapons Support projects. The scope of work requires the processing of 37 pins, ensuring all items are packaged according to ASTM D3951, marked and labeled per MIL-STD-129, and palletized using MIL-SPEC materials in accordance with RP001. All activities must strictly adhere to the DLA Master List of Technical and Quality Requirements. The project is managed under the Department of Defense through the DLA Weapons Support Supplier Oper Suppl Spt Div, falling under NAICS code 493110. Final deliverables are to be shipped to DLA Distribution DDSP New Cumberland in New Cumberland, Pennsylvania. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026.

General Warehousing and Storage

POSTED

DEADLINE

Supply of Aerospace-Grade Raw MaterialsThis subcontract involves the supply of aerospace-grade raw metal stock, specifically bars, rods, or billets, for prime contractors working on DLA Weapons Support projects. The materials must strictly adhere to the chemical and physical properties required for part number 859C10054-3. To ensure quality and regulatory compliance, the provider is required to furnish Material Test Reports and Certificates of Conformance in accordance with the Buy American Act and the Berry Amendment. Managed by the Department of Defense under the DLA Weapons Support Supplier Oper Supplier Spt Div, the contract falls under NAICS code 331491. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 21, 2026, to provide the certified raw material stock as specified.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

DEADLINE

Precision Machining and Fabrication of Aircraft Mounting PinsThis subcontract involves the precision machining, turning, and finishing of 37 aircraft mounting pins for the Department of Defense, specifically supporting DLA Weapons Support. The contractor is required to manufacture the pins according to Northrop Grumman part number 859C10054-3 and ensure the final products conform to NSN 1680-01-566-4762 using CNC lathes and mills. Performance of this contract takes place in New Cumberland and requires strict adherence to quality and security standards, including SAE AS9003 or ISO 9001 and CMMC Level 2 compliance. The project falls under NAICS code 332710 and requires the delivery of fully inspected components that meet all specified technical requirements.

POSTED

DEADLINE

Specialized UV-Protective Packaging for Critical ComponentsThis subcontract involves providing specialized packaging services for ultraviolet-sensitive defense components supporting prime contractors for the DLA Weapons Support Supplier Oper Supplier Spt Div. The scope of work requires sealing items in medium-duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117. Additionally, the contractor must execute all marking and labeling per MIL-STD-129 and ensure preservation follows MIL-STD-2073-1E Method 33 to prepare components for international shipment. The opportunity is categorized under NAICS code 488410 and was posted on October 13, 2026, with a response deadline of October 21, 2026. The primary objective is to deliver fully packaged and marked critical components that meet rigorous Department of Defense standards for protection and transport.

Motor Vehicle Towing

POSTED

DEADLINE

Precision Manufacturing of Navy Critical Safety RingsThis subcontract involves the precision manufacturing of Navy Critical Safety Rings, identified by NSN 5330015991174, for prime contractors supporting DLA Weapons Support projects. The scope of work requires high-precision machining and fabrication that adheres to strict Navy Critical Safety Item and Critical Application Item standards, mandating a zero-nonconformance acceptance rate. Additionally, the contractor must apply IUID marking in accordance with MIL-STD-130 and deliver two fully finished and inspected safety rings. To qualify, the provider must possess SAE AS9100 or ISO 9001 certification and utilize CNC equipment capable of meeting rigorous aerospace tolerances. This opportunity is managed by the Department of Defense under the DLA Weapons Support Supplier Oper Supplier Spt Div, with a response deadline set for October 21, 2026.

POSTED

DEADLINE

NRP, SAFETY RING ROT

Solicitation # SPE4A4-27-T-0003

Solicitation SPE4A4-27-T-0003 is a fixed-price requirement issued by the DLA Weapons Support Supplier Oper Supplier Spt Div for the procurement of two safety rings (NSN 5330015991174, Part Number 123SME90029-1). This item is designated as a Navy Critical Safety Item and a Critical Application Item. The contract is a Foreign Military Sales requirement for the Japan Air Self Defense Force, with delivery coordinated through K. Line Logistics Ltd in Hayward, California, and a required delivery date of January 23, 2026. Inspection and acceptance are both conducted at the point of origin. The contractor must adhere to strict quality and packaging standards, including SAE AS9100 or ISO 9001 compliance and a zero-nonconformance acceptance criteria. Due to ultraviolet sensitivity, items must be sealed in medium-duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Marking requirements include MIL-STD-129 and Item Unique Identification (IUID) per MIL-STD-130. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF) and compliance with various FAR and DFARS clauses regarding equal opportunity, combating trafficking in persons, and the safeguarding of covered defense information.

Other Grocery and Related Products Merchant Wholesalers

POSTED

DEADLINE

LIGHT, COCKPIT, AIRCRAFT

Solicitation # SPE4A4-27-T-0002

Solicitation SPE4A4-27-T-0002 is a fixed-price contract issued by the DLA Weapons Support Supplier Oper Supplier Spt Div for the procurement of two aircraft cockpit flood lights, identified by NSN 6220006354356. This critical application item is classified as a commercial product under NAICS code 336413. The required delivery timeline is 270 days, with shipping terms set as FOB Origin and the final destination being the DLA Distribution Depot at Tinker AFB, Oklahoma. Inspection and acceptance will occur at the destination, and the manufacturer's inspection system must comply with ISO 9001:2015 or an equivalent standard. The contract mandates strict adherence to DLA Master List technical and quality requirements, including RA001, RQ001, and RQ011. Packaging must follow MIL-STD-129 for marking and labeling, with non-hazardous materials adhering to ASTM D3951 and hazardous materials following TQ requirement IP025 and FED-STD-313. Sampling shall be conducted per MIL-STD-1916 or ASQ H1331. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American Act and various DFARS cybersecurity and safeguarding regulations.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

PIN, MOUNTING, AIRCRA

Solicitation # SPE4A4-27-T-0004

Solicitation SPE4A4-27-T-0004 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of 37 aircraft mounting pins, identified by NSN 1680-01-566-4762 and Northrop Grumman Systems Corporation part number 859C10054-3. The requirement is categorized under NAICS code 336413. The need ship date is August 3, 2025, with an original required delivery date of March 22, 2026, and a delivery period of 162 days. Delivery is FOB Origin, with the destination for inspection and acceptance being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129 for marking and labeling, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. Compliance requirements include a CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and a manufacturer's inspection system complying with SAE AS9003 or ISO 9001. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additional regulatory clauses include FAR 52.246-2 for destination inspection and FAR 52.222-50 regarding the combatting of trafficking in persons.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS