Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and Logistics Services

Active

Federal

Response Deadline11/02/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for MIL-SPEC Packaging and Logistics Services involves providing specialized military packaging and shipment support for prime contractors under DLA Mechanicsburg supply contracts. The scope of work focuses on packaging transducers in accordance with MIL-STD-2073 and managing all clearance and MILSTAMP requirements as mandated by FAR 52.247-52 for delivery to water ports. The service provider is responsible for delivering fully packaged and labeled units, specifically coordinating the final delivery to the Receiving Officer of the USS Makin Island LHD 8. This effort falls under NAICS code 488510 and is managed through the Department of Defense.

General Info

Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

NAICS

488510 - Freight Transportation Arrangement

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM126QHA87.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TRANSDUCER,MOTIONAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 08:30:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized military packaging and shipment for prime contractors on DLA Mechanicsburg supply contracts. Packages transducers per MIL-STD-2073 and manages clearance/MILSTAMP requirements of FAR 52.247-52 for delivery to water ports. Coordinates delivery to the Receiving Officer of the USS Makin Island LHD 8. Delivers fully packaged and labeled units.

Similar Contracts

Same NAICS industry code

Military-Grade Packing and Shipping ServicesThis subcontract for Military-Grade Packing and Shipping Services involves providing specialized packing and marking for prime contractors supporting Department of Defense supply contracts. The scope of work requires shipments to be packed to Level A for Surface OCONUS or Level B for CONUS and Air standards, utilizing MIL-STD-2073-1 Appendix C containers. Additionally, the provider must apply MIL-STD-129 labels, including PID, CLIN, and SubCLIN, to ensure all shipping containers are properly marked and ready for transport. Managed by the Pa DLA Aviation At Philadelphia under NAICS code 488510, the opportunity was posted on October 20, 2026, with a response deadline of October 26, 2026. The primary objective is the delivery of fully compliant, military-grade packed shipments that meet strict federal standards for international and domestic transport.

Pa DLA Aviation At Philadelphia

POSTED

about 22 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services involves providing specialized military-grade packaging for sensitive electronic equipment, specifically Network Analyzers, to support prime contractors on NAVSUP Weapon Systems Support Philadelphia projects. The scope of work requires strict adherence to MIL-STD-2073 and MIL-STD-129 standards, utilizing moisture barriers and ESD-safe materials to ensure equipment integrity. The contractor is responsible for the proper packaging, labeling, and delivery of these assets to the government shipping point at destination W62G2T. This effort falls under NAICS code 488510 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping Services for Critical HardwareThis subcontract involves providing specialized packaging and logistics services for critical shipboard hardware supporting prime contractors on NAVSUP Weapon Systems Support Mech projects. The scope of work requires strict adherence to MIL-STD-2073-1 for packaging materials and MIL-STD-129 for shipment marking to ensure all critical components are delivered securely and correctly. The contractor is responsible for coordinating FOB Destination shipping to designated DODAAC locations. This opportunity falls under NAICS code 488510 and is associated with the Department of Defense. Interested parties must respond by November 25, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Defense-Standard Packaging and Delivery ServicesThis subcontract for Defense-Standard Packaging and Delivery Services involves providing specialized preservation, packaging, and marking of naval components for prime contractors working on Department of National Defence projects. The service provider must ensure all items are packaged according to D-LM-008-001/SF-001, MIL-STD-2073, MIL-STD-129, and NATO standards, utilizing military bar-coding and environmentally preferable materials. Final marked assemblies are to be delivered to CFB Halifax and CFB Esquimalt. To be eligible for this contract, the provider must maintain registration with the Controlled Goods Program. The scope of work is categorized under NAICS code 488510 and is performed across British Columbia and Nova Scotia. Interested parties must respond by November 4, 2026.

Department of National Defence

POSTED

DEADLINE

International Freight and Customs ClearanceThis subcontract for International Freight and Customs Clearance supports prime contractors on research projects for the National Research Council Canada. The scope of work involves managing Delivered-at-Place shipping, handling all customs duties, and completing necessary documentation for the transport of sensitive laboratory machinery. Specifically, the contractor is responsible for the delivery of a 3D printing system to an NRC facility located in Mississauga, Ontario. To qualify for this engagement, the provider must be a licensed Customs Broker and possess specialized heavy equipment rigging capabilities. The project falls under NAICS code 488510 and is managed through the Government of Canada. Interested parties must adhere to the response deadline of October 29, 2026.

National Research Council of Canada

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services involves providing specialized packaging, sealing, and palletization for prime contractors under DLA supply contracts. The scope of work requires items to be packaged in medium duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1. Additionally, the contractor must ensure all marking adheres to MIL-STD-129 and palletization follows RP001 DLA Packaging Requirements for Procurement to ensure shipments are ready for final DLA acceptance. The opportunity is issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt agency, falling under NAICS code 488510. The solicitation was posted on October 19, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Specialized Packaging Services for Aerospace/Defense HardwareThis subcontract opportunity is for specialized packaging services supporting critical hardware for prime contractors on DLA Weapons Support ASC projects. The selected provider will be responsible for supplying all necessary packaging materials and performing packing duties in strict adherence to ASTM D3951 standards and the DLA Master List of Technical and Quality Requirements. All finished products must be securely packaged and prepared for FOB Destination shipment. The project is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div and is designated as a Total Small Business Set-Aside. Interested parties must submit their responses by November 2, 2026. The contract falls under NAICS code 488510 and focuses on ensuring the integrity of aerospace and defense hardware through compliant material usage and rigorous quality control.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Packaging and Palletization ServicesThis subcontract for Specialized Packaging and Palletization Services supports prime contractors delivering supply contracts for the Department of Defense via the DDSP New Cumberland Facility. The scope of work involves the packaging, preservation, and palletization of kits, ensuring all shipments are prepared for FOB Origin transport. All activities must strictly adhere to RP001 DLA Packaging Requirements for Procurement and MIL-STD-129 marking standards, utilizing required strapping and preservation materials. The project is located in New Cumberland, Pennsylvania, under NAICS code 488510. Interested parties must note the response deadline of October 30, 2026, for this requirement.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

International Freight Forwarding (USA to Japan)This subcontract for International Freight Forwarding involves providing transportation and customs brokerage services for prime contractors delivering DLA Troop Support materials to Yokosuka Naval Base, Japan. The scope of work includes managing ocean or air freight transport from the port of loading to the final port of discharge, ensuring all commodities are delivered to the designated destination point in Japan. The selected provider must maintain strict compliance with Department of Defense ocean transportation regulations and U.S.-flag vessel requirements. Key responsibilities include the management of all necessary ocean freight documentation to facilitate seamless customs brokerage and delivery. This effort is managed under the Defense Logistics Agency within the Department of Defense under NAICS code 488510.

Defense Logistics Agency

POSTED

DEADLINE

DLA Compliant Packaging and Marking ServicesThis subcontract involves providing specialized packaging, marking, and palletization services for aircraft components intended for prime contractors on DLA supply contracts. The scope of work requires strict adherence to technical standards, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 and RA001 for palletization. Additionally, the contractor is responsible for removing government identification from non-accepted supplies according to RQ011 and ensuring all shipments are ready for transport to Bulk Break Point W25G1Q. Managed by the Department of Defense under the DLA Weapons Support Land Supply Chain ESOC Buys, the project is categorized under NAICS code 488510. Performance will take place in Chambersburg, Pennsylvania. Interested parties must note the response deadline of October 30, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging, marking, and palletization for valve bodies on behalf of prime contractors for the DLA Weapons Support Aviation Supply Chain. The work must be performed in New Cumberland, Pennsylvania, ensuring all deliverables strictly adhere to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization requirements. The project requires the use of materials compliant with ASTM and MIL-STD standards to meet Department of Defense specifications. Interested parties should note the response deadline of October 27, 2026, for this effort categorized under NAICS code 488510.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Military-Spec Packaging and Freight ServicesThis subcontract for Military-Spec Packaging and Freight Services involves providing specialized packaging, marking, and shipping support for prime contractors on DLA supply contracts. The scope of work requires strict adherence to MIL-STD-129 for markings and RP001 for palletization. Additionally, the contractor must manage hazardous materials in accordance with IP025 and 29 CFR 1910.1200 using certified HazMat containers to ensure safe and compliant transport. The primary objective is the delivery of properly marked and palletized components to the Letterkenny Army Depot via the fastest traceable shipping methods. This project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt, with the place of performance located in Chambersburg, Pennsylvania. The solicitation is categorized under NAICS code 488510.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

Transducer Raw Material and Component SupplyThe Transducer Raw Material and Component Supply subcontract, managed by DLA Mechanicsburg for the Department of Defense, involves the procurement of raw materials, piezoelectric elements, and specialized housings. The selected provider is responsible for sourcing materials that strictly adhere to the metallurgical and chemical specifications outlined in TDP Version 007. To ensure full compliance with DODISS standards, the provider must deliver certified raw materials or sub-components accompanied by Certificates of Conformance. This opportunity falls under NAICS code 327993, with a response deadline set for November 2, 2026.

Mineral Wool Manufacturing

POSTED

about 22 hours ago

DEADLINE

Motional Transducer Fabrication (OEM/Specialized Manufacturer)This subcontract involves the specialized fabrication of Motional Transducers, identified by NIIN 015356450, to support prime contractors under DLA Mechanicsburg supply contracts. The manufacturer is required to produce these units in strict accordance with TDP Version 007 and Cage Code 07482. The scope of work includes the physical identification and marking of all units per MIL-STD-130, REV N, with a requirement to maintain all inspection records for a period of 365 days. The final deliverable consists of finished, marked, and packaged transducers provided to the Department of Defense.

Other Electronic Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Discrete Electronic Components and RelaysThis subcontract, managed by the Department of Defense through SPRMM1 DLA Mechanicsburg, involves the supply of discrete electronic components, relays, and raw materials for prime contractors working on DLA/Navy CCA assembly projects. The provider is responsible for sourcing components that strictly adhere to Cage Code 16331 design requirements and must ensure all parts are counterfeit-free in accordance with CDAP guidelines. A critical requirement of the contract is the provision of comprehensive supply chain traceability documentation, including National Stock Numbers and manufacturing source CAGE codes. All delivered electronic components must be certified and accompanied by detailed batch documentation to maintain quality and security standards.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Manufacture of Discrete Multi and Relay CCAsThis subcontract through the Department of Defense and DLA Mechanicsburg involves the manufacture of high-precision electronic circuit card assemblies for prime contractors on Navy projects. The scope of work specifically requires the fabrication of Relay and Discrete Multi CCAs in accordance with Cage Code 16331 and DODISS standards. The selected provider must deliver finished, tested, and certified assemblies while adhering to strict supply chain traceability and CDAP standards. Due to the nature of the components, the contractor must possess the capability to handle export-controlled data as mandated by OPNAVINST 5510.161. This opportunity falls under NAICS code 334418, with a response deadline set for October 30, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Removable Pump CASI (NIIN: 017013172)

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

ASSY, RECT & PANEL

Solicitation # SPRMM126QGF00

This solicitation from the Department of Defense, issued by DLA Mechanicsburg, is for the manufacture and procurement of the ASSY, RECT & PANEL. The primary purpose of the current amendment is to extend the quote submission deadline to October 16, 2026. The contract requires strict adherence to quality assurance and marking standards, specifically MIL-STD-130, and mandates that all invoicing and receiving reports be submitted electronically via PIEE-WAWF. Suppliers must provide the Original Equipment Manufacturer (OEM) details and CAGE code if they are not the manufacturer, as refurbished materials are not acceptable. Authorized distributors must provide proof of authorization on company letterhead to be considered for the award. The contract also specifies that any changes in production facilities require written approval from the Contracting Officer and may incur an administrative fee.

Other Electronic Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

TRANSDUCER,MOTIONAL

Solicitation # SPRMM126QHA87

Solicitation SPRMM126QHA87, issued by DLA Mechanicsburg, is a request for the manufacture and supply of a Motional Transducer (NIIN 015356450). The requirement specifies the design represented by Cage Code 07482, reference number L49921P02, and utilizes Technical Data Package version 007. The procurement is conducted under Emergency Acquisition Flexibilities, with a response deadline of November 2, 2026. Delivery is required within 30 days, FOB Destination, to the Receiving Officer of the USS Makin Island LHD 8. The contract mandates strict quality assurance and packaging standards, including physical identification per MIL-STD-130 and packaging according to MIL-STD-2073. Inspection and acceptance are conducted at the origin, and the contractor is responsible for maintaining all inspection records for 365 days following final delivery. Invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors who are not the original equipment manufacturer must disclose the OEM cage code and part number. Evaluation is based on technical acceptability, and any requested evidence of product compliance must be submitted within two days to avoid disqualification.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 22 hours ago

DEADLINE

REMOVABLE PUMP CASI

Solicitation # SPRMM126QGG73

This solicitation, issued by DLA Mechanicsburg under SEPA-EAF Authority, seeks the manufacture of a Removable Pump Casi (NIIN 017013172). The government intends to make a single award to a responsible, technically acceptable offeror based on the most advantageous terms, with a strong emphasis on past performance over price. Evaluation will utilize the DoD Supplier Performance Risk System (SPRS) to assess quality, price, and supplier risk. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number. The contract requires a quality system compliant with ISO 9001 and mandates that all items be mercury-free, as they are intended for use on submarines or surface ships. Logistics and administration are managed through the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Delivery is required as soon as possible (ASAP) with FOB Destination terms. Packaging and marking must adhere to MIL-STD-2073 and MIL-STD-129, and the item must be physically identified per Item Unique Identification (IUI) requirements. Inspection and acceptance will occur at the origin, specifically at the contractor's or subcontractor's plant. The solicitation also includes strict cybersecurity requirements per DFARS 252.204-7012 and requires the submission of Safety Data Sheets (SDS) for any hazardous materials prior to award.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

MODULE ASSEMBLY,UHF

Solicitation # SPRMM126QHB34

This contract solicitation, issued by the Defense Logistics Agency (DLA) Mechanicsburg under solicitation number SPRMM126QHB34, seeks the manufacture and delivery of the MODULE ASSEMBLY,UHF. The contract outlines detailed quality assurance and inspection requirements, including compliance with MIL-STD-130 marking standards, electrostatic discharge control per ANSI/ESD S20.20, and strict adherence to designated Cage Code reference numbers. Contractors must maintain thorough inspection records and are responsible for all quality inspections unless the government chooses to perform verification. The contract also requires appropriate security clearances as specified in the attached DD Form 254, with access to classified information at the Secret level. The solicitation emphasizes that all contractual communications and document issuances—including contracts, purchase orders, and modifications—are considered official upon transmission via mail, fax, or electronic means. Vendors must identify themselves as authorized distributors or manufacturers, provide OEM information if applicable, and submit invoices and receiving reports electronically through the Wide Area Workflow system. The contract includes special provisions for handling changes in design or part numbers, packaging in accordance with MIL-STD 2073, and specifies where and how contractors may obtain relevant military and commercial standards. The response deadline is June 18, 2026, and vendors are encouraged to register on the Procurement Integrated Enterprise Environment (PIEE) platform for contract updates. Contact information and technical support are provided to facilitate communication and ensure compliance throughout the procurement.

Other Communications Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

POWER UNIT, 6KVA

Solicitation # SPRMM126QMJ30

This solicitation from DLA Mechanicsburg is for the manufacture and supply of a 6KVA Power Unit. The contract will be awarded based on the Lowest Price Technically Acceptable criteria. Key requirements include physical identification per MIL-STD-130 and packaging according to MIL-STD 2073. If the offeror is not the original manufacturer, they must identify the Original Equipment Manufacturer and provide their CAGE code and part number. Authorized distributors must provide proof of authorization on company letterhead to be considered for the award. The contract mandates the use of the PIEE-WAWF system for the electronic submission of invoices and receiving reports. All contractual documents are considered issued when sent via mail, facsimile, or electronic means. Performance at any facility other than the one named in the contract is prohibited without written approval from the Contracting Officer and may require a fee to cover administrative costs. Inspection of materials and final acceptance will be conducted at the specified CAGE and address, with the contractor maintaining all inspection records for 365 days following final delivery.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 10 hours

SNGL BOARD COMPUTER

Solicitation # SPRMM126QGG65

Electronic Computer Manufacturing

POSTED

about 22 hours ago

DEADLINE

MODULE ASSEMBLY,RIM

Solicitation # SPRMM126QHD00

DLA Weapons Support Mechanicsburg is soliciting quotes for the manufacture and procurement of non-commercial items, specifically the Remote Launch E PNL and Module Assembly, RIM. This firm-fixed-price acquisition leverages FAR 12.001(b) procedures and will be awarded based on Lowest Price Technically Acceptable (LPTA) criteria, although some documentation indicates past performance is weighted more heavily than price. The deadline for submission of offers has been extended to October 29, 2026. The contract requires strict adherence to quality and security standards, including a Secret level security clearance per DD Form 254 and compliance with ANSI/ESD S20.20 for electrostatic discharge control. Items must be physically identified according to MIL-STD-130 and packaged per MIL-STD-2073. Inspection and acceptance will occur at the origin, and the contractor is responsible for maintaining all inspection records for 365 days following final delivery. Invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors who are not the original equipment manufacturer must identify the OEM's CAGE code and part number to be considered for award.

Other Electronic Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS