Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and Marking Services

Open

Response Deadline11/30/2026, 04:30:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized military preservation, marking, and packaging services for prime contractors fulfilling DLA Mechanicsburg supply contracts for the Department of the Navy. The primary objective is the delivery of a fully marked and packaged Pump Unit Assembly, requiring strict adherence to MIL-STD-130, REV N for physical identification and MIL-STD-2073 and MIL-P-16789 for preservation and packing. The scope of work includes the use of MIL-SPEC crates, desiccants, and vapor barriers, and the selected provider must demonstrate a proven capability in MIL-STD compliance. The project is managed under agency SPRMM1 DLA Mechanicsburg and will be performed in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by November 30, 2026. The contract is categorized under NAICS code 488510, focusing on the technical requirements of military-grade logistics and material handling to ensure equipment is properly protected and identified for naval use.

General Info

Military preservation, marking, and packaging of Pump Unit Assemblies for Department of Navy.

Agency

Department Of The Navy → SPRMM1 DLA Mechanicsburg

NAICS

488510 - Freight Transportation Arrangement

Place of Performance

MECHANICSBURG, PA, 17055-0788, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM127QKA45.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PUMP UNIT ASSEMBLY — 4820016784565 — SPRMM127QKA45

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 10

subcontract

Response DeadlineNov 30

Submission deadline

Response Deadline

11/30/2026, 04:30:00 PM ESTin 20 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → SPRMM1 DLA Mechanicsburg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized military preservation, marking, and packaging for prime contractors delivering DLA Mechanicsburg supply contracts for the Navy. Applies physical identification per MIL-STD-130, REV N and executes preservation and packing per MIL-STD-2073 and MIL-P-16789 using MIL-SPEC crates, desiccants, and vapor barriers. Requires demonstrated capability in MIL-STD compliance. Delivers a fully marked and packaged Pump Unit Assembly.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized packaging and final delivery preparation for 13 units, ensuring all items are packaged and labeled for FOB Origin shipment. Performance takes place in New Cumberland, Pennsylvania, under NAICS code 488510 for the Department of Defense. Technical requirements mandate strict adherence to RP001, MIL-STD-129, and MIL-STD-2073-1E standards. The contractor must utilize MIL-SPEC packaging materials and labeling equipment, specifically employing preservation method 33 and wrap material GB. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Aerospace Component Packaging and Marking ServicesThis subcontract for Aerospace Component Packaging and Marking Services involves providing specialized packaging and labeling for prime contractors fulfilling DLA supply contracts. The scope of work requires the delivery of five packaged and labeled components to DLA Distribution Jacksonville, ensuring all items are shipment-ready. Technical execution must adhere to strict military and industry standards, specifically MIL-STD-129 for marking and labeling and RP001 for palletization. Packaging requirements are governed by ASTM D3951 for non-hazardous materials and TQ requirement IP025 for hazardous materials. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves specialized military packaging, marking, and palletization executed in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 requirements. The contractor is responsible for utilizing MIL-SPEC preservation materials and industrial equipment to prepare and deliver shipments under the First Destination Transportation program for FOB Origin delivery. The opportunity is a total small business set-aside under NAICS code 488510 for the Department of Defense. Performance will take place in Texarkana, Texas. Interested parties must respond by November 17, 2026, to provide these essential logistics services for the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Destination DeliveryThis subcontract involves providing specialized military packaging and shipping services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires strict adherence to MIL-STD-2073-1E and RP001 for packaging, as well as MIL-STD-129 for shipment marking. To ensure the integrity of the items, the contractor must utilize approved MIL-SPEC preservation and cushioning materials. The final completed assemblies are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This opportunity is categorized under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping Services

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

HAZMAT International Freight Forwarder (Qatar)This subcontract involves the international freight forwarding of hazardous materials for prime contractors supporting Defense Logistics Agency supply contracts. The primary scope of work is the transport of non-spillable lead acid batteries to Al Udeid Air Base in Qatar under FOB Destination terms. The contractor is responsible for ensuring delivery within a strict 20-day window using tracking systems and vehicles specifically certified for HAZMAT transport. Compliance with 29 C.F.R. 1910.1200 Hazard Communication Standards is mandatory for all operations. The contractor must provide confirmed acceptance of the batteries upon arrival at the destination to fulfill the contract requirements. This effort falls under NAICS code 488510 and is managed through the Department of Defense.

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

Defense-Compliant Packaging and Marking ServicesThis subcontract involves providing specialized packaging, marking, and labeling services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work requires hardware to be packaged according to ASTM D3951 and RP001 standards, with marking and labeling strictly adhering to MIL-STD-129 and MIL-STD-130N. The contractor must utilize specialized equipment capable of producing compliant identifiers to ensure all shipments are ready for FOB Origin delivery. Performance for this contract takes place in San Diego, California, with final deliveries routed to DLA Distribution San Diego. The project falls under NAICS code 488510 and is managed through the DLA Weapons Support ASC. Interested parties should note the response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services involves providing specialized military packaging and logistics support for prime contractors fulfilling DLA supply contracts. The scope of work focuses on the packaging of aerospace components in strict accordance with MIL-STD-129 and RP001 standards, utilizing specific packaging data per MIL-STD-2073-1E, including QUP 001, Preservation Method 33, and Cleaning/Drying method 1. The service provider is responsible for managing FOB Destination shipping to ensure the delivery of fully compliant, packaged, and labeled shipments to DLA Distribution DDSP in New Cumberland, Pennsylvania. This effort is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, falling under NAICS code 488510.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors on DLA Weapons Support Maritime Supply Chain projects. The scope of work involves the specialized packaging of components according to MIL-STD-2073-1E, marking shipments per MIL-STD-129, and palletizing materials based on RP001 standards. All deliverables must utilize MIL-SPEC packaging materials and labeling systems to ensure they are shipment-ready for transport to DLA Distribution San Joaquin. The project is managed under the Department of Defense for the DLA Weapons Support Maritime Supply Chain, with performance taking place in Tracy, California. Interested parties should note the response deadline of November 20, 2026. The contract is categorized under NAICS code 488510, focusing on the delivery of fully palletized components that meet strict military specifications.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing specialized military packaging and marking to ensure all items meet MIL-STD-2073-1E and MIL-STD-129 standards. Additionally, the contractor is responsible for executing palletization according to RP001 and maintaining strict compliance with IP056 mercury restrictions to deliver shipment-ready units for First Destination Transportation. The opportunity is a Total Small Business Set-Aside under NAICS code 488510, managed by the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance will take place at FPO 96678. Interested parties must respond by November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging of critical hardware in accordance with ASTM D3951 standards and the application of labels and markings as required by MIL-STD-129. The service provider is responsible for coordinating transport through the First Destination Transportation program to the DLA Distribution Depot Oklahoma, ensuring all shipments are ready for final delivery to Tinker AFB. This requirement falls under NAICS code 488510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Freight Forwarding to USS George Washington (FPO AP)This subcontract involves the freight forwarding of sensitive electronic hardware for prime contractors supporting Department of Defense supply contracts. The scope of work requires the management of First Destination Transportation in accordance with DLAD Proc Notes C19 and C20, ensuring that shipments are coordinated for delivery to FPO AP 96607. The primary objective is the successful delivery of materials to the final consignee aboard the USS George Washington (CVN 73). All logistics must be executed within a strict 20-day lead time to meet operational requirements.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of The Navy → SPRMM1 DLA Mechanicsburg

Same awarding agency

MIL-SPEC Packaging and Preservation ServicesThis subcontract for MIL-SPEC Packaging and Preservation Services involves providing specialized packaging materials and preservation services for sensitive electronic assemblies. The work supports prime contractors delivering DLA supply contracts for the Department of the Navy, specifically requiring the delivery of three packaged and preserved Circuit Card Assemblies ready for shipment. All activities must be performed in accordance with MIL-STD-2073, including the application of DLR labeling and the use of anti-static and moisture barrier materials. Additionally, all wood packaging must comply with ISPM 15 standards. The project is managed by the SPRMM1 DLA Mechanicsburg agency and will be performed in Mechanicsburg, Pennsylvania. Interested parties should note the response deadline of December 10, 2026. The contract falls under NAICS code 488410 and is focused on ensuring that critical electronic components are preserved and packaged to rigorous military specifications for safe transport and delivery.

Motor Vehicle Towing

POSTED

about 19 hours ago

DEADLINE

Circuit Card Assembly Fabrication and AssemblyThis subcontract involves the manufacture and assembly of three Circuit Card Assemblies (NIIN: 014122041) for prime contractors supporting Department of the Navy supply contracts via DLA Mechanicsburg. The project requires fabrication according to Cage Codes 0ERB9 and 18355, with strict adherence to military standards for soldering, marking, and configuration control. The contractor must maintain quality systems and ESD protected work areas in compliance with MIL-Q-9858 and ANSI/ESD S20.20. The final deliverable consists of three completed and inspected assemblies to be performed in Mechanicsburg. Responses for this opportunity are due by December 10, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 19 hours ago

DEADLINE

Pump Unit Assembly (NSN 4820-01-678-4565) SupplierThis subcontract involves the procurement of one new and unused Pump Unit Assembly under NSN 4820-01-678-4565 to support DLA Mechanicsburg supply contracts for the Department of the Navy. The selected supplier is responsible for manufacturing or procuring the assembly in strict accordance with the specified design, ensuring that all internal inspections and quality assurance protocols are completed at the origin plant. To qualify, the supplier must possess proprietary tooling and provide formal proof of authorization from the Original Equipment Manufacturer on company letterhead. The final deliverable consists of one physically identified and packaged Pump Unit Assembly delivered to Mechanicsburg. Responses for this requirement are due by November 30, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

PUMP UNIT ASSEMBLY — 4820016784565 — SPRMM127QKA45

Solicitation # SPRMM127QKA45

This solicitation, issued by DLA Mechanicsburg for the Department of the Navy, seeks the procurement of one Pump Unit Assembly (NSN 4820-01-678-4565). The contract is a fixed-price requirement with a DO priority rating for national defense. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations considering technical acceptability, price, and risk assessments from the Supplier Performance Risk System (SPRS). Offerors must be authorized distributors of the original manufacturer and provide proof of authorization on company letterhead. The contractor is responsible for all inspection and quality assurance, with inspection and acceptance occurring at the contractor's plant. Physical identification must comply with MIL-STD-130, and packaging must adhere to MIL-STD-2073 and MIL-P-16789, with specific requirements for CONUS and OCONUS shipments. Invoicing and receiving reports must be submitted electronically via PIEE-WAWF. The acquisition is categorized under NAICS code 332919, and a 10 percent price preference is applied to eligible HUBZone small business concerns. All delivered materials must be certified as new and unused.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

CIRCUIT CARD ASSEMB — 5998014122041 — SPRMM127QKA88

Solicitation # SPRMM127QKA88

Solicitation SPRMM127QKA88, issued by the Department of the Navy via DLA Mechanicsburg, is a request for the manufacture and delivery of three Circuit Card Assemblies (NIIN 014122041) for the AN/USQ-82 Data Multiplex System. The procurement is based on the Lowest Price Technically Acceptable (LPTA) criteria, where award is granted to the responsible offeror providing the lowest price without taking exception to any solicitation terms. Refurbished materials are strictly prohibited. The contractor must adhere to specific design standards represented by Cage Codes 0ERB9 and 18355, and comply with a rigorous set of military standards, including MIL-STD-130 for marking, MIL-STD-2000 for soldering, and MIL-Q-9858 for quality assurance. The contract mandates strict configuration control under MIL-STD-973 short form procedures and requires compliance with ANSI/ESD S20.20 for electrostatic discharge control. Packaging must follow MIL-STD-2073 and MIL-STD-129, with specific requirements for packing levels based on destination and the use of ISPM 15 treated wood packaging. Inspection and acceptance will occur at the origin, with the contractor maintaining all inspection records for 365 days post-delivery. Administrative requirements include electronic invoicing via Wide Area Workflow (WAWF) and adherence to various FAR and DFARS clauses regarding cybersecurity (CMMC), hazardous material identification, and domestic preference certifications.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Wiper Assembly, Opti (NSN 1240-01-531-5140)This subcontract involves the procurement or manufacture of one Wiper Assembly, Opti, identified by NSN 1240-01-531-5140 for the Department of the Navy via DLA Mechanicsburg. The selected contractor is responsible for ensuring the assembly meets physical identification standards per MIL-STD-130 and adheres to packaging and marking requirements outlined in MIL-STD-2073 and MIL-STD-129. The final product must be delivered as a single packaged and marked unit on a FOB Origin basis. Compliance with the Buy American Program and CMMC standards is mandatory for this requirement. The opportunity is categorized under NAICS code 423610, with the place of performance located in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of November 23, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Military Specification Packaging and MarkingThis subcontract involves providing specialized military marking and packaging services for prime contractors supporting Department of the Navy projects through DLA Mechanicsburg. The scope of work requires the application of physical identification and packaging for two units in strict accordance with MIL-STD-130 Rev N, MIL-STD-2073-1, and MIL-STD-129. The contractor must utilize MIL-SPEC marking equipment to ensure all DLR labeling and OCONUS shipment requirements are fully met. The project is managed by the SPRMM1 DLA Mechanicsburg agency and will be performed in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of December 7, 2026. The contract falls under NAICS code 488510, focusing on the precise preparation of military assets for secure and compliant transport.

Freight Transportation Arrangement

POSTED

DEADLINE

Precision Chassis Fabrication (Slide Hole Mounting)This subcontract involves the fabrication of two precision-machined chassis and enclosures for prime contractors supporting DLA Mechanicsburg Navy projects. The scope of work requires the use of CNC milling and turning to ensure the housings meet specific slide hole mounting requirements as defined by Intellipower drawing LY10382 Rev A and maintain compatibility with Actron part A5610-0156-P. Notably, the use of additive manufacturing is strictly prohibited for this project. The contract is managed by the Department of the Navy under agency SPRMM1 DLA Mechanicsburg, with performance taking place in Mechanicsburg, Pennsylvania. Interested parties must adhere to the response deadline of December 7, 2026. The project falls under NAICS code 332710, focusing on high-precision machining to meet rigorous military specifications.

POSTED

DEADLINE

Power Supply Unit Fabrication and AssemblyThis subcontract involves the manufacture and assembly of two completed and tested Power Supply Units for prime contractors supporting DLA Mechanicsburg Navy projects. The fabrication must strictly adhere to Cage Code 0UMT8, reference FA10382, and NAVSEA drawing 7628734-3 Rev D Sheet 2. Additionally, the contractor is required to perform physical identification in accordance with MIL-STD-130, Rev N, while additive manufacturing is explicitly prohibited. Managed by the Department of the Navy under agency SPRMM1 DLA Mechanicsburg, the project falls under NAICS code 334419. The work is to be performed in Mechanicsburg, Pennsylvania. The solicitation was posted on November 6, 2026, with a response deadline set for December 7, 2026.

Other Electronic Component Manufacturing

POSTED

DEADLINE

POWER SUPPLY UNINTE — 6130016876873 — SPRMM127QKA82

Solicitation # SPRMM127QKA82

Solicitation SPRMM1-27-Q-KA82, issued by DLA Mechanicsburg for the Department of the Navy, seeks the manufacture and delivery of two Power Supply Units (NSN 6130-01-687-6873). The units must adhere to the design represented by Cage Code 0UMT8, reference number FA10382, and meet specific material and physical requirements outlined in NAVSEA drawing 7628734-3 Rev D. The chassis slide hole mounting configuration must be compatible with Actron part number A5610-0156-P and Jonathan Engineering Solutions part number 14512488-P. All items must be new and unused, and the use of additive manufacturing is strictly prohibited for this procurement. The contractor is responsible for quality assurance and inspection at the point of origin, with records maintained for 365 days following final delivery. Physical identification must comply with MIL-STD-130, and packaging must follow MIL-STD-2073-1 and MIL-STD-129 standards, including specific DLR labeling for applicable containers. Invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Award consideration is limited to authorized distributors of the original manufacturer, and offerors must provide proof of authorization on company letterhead. Quotations are due by December 07, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

PUMP,CENTRIFUGAL — 4320012530931 — SPRMM126QME77

Solicitation # SPRMM126QME77

Solicitation SPRMM1-26-Q-ME77, issued by the Department of the Navy via NAVSUP Weapons Systems Support, seeks the procurement of one centrifugal pump, NSN 4320-01-253-0931. The required item must conform to the design represented by Cage Code 27235, reference number 60-886. Award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. The government will evaluate offers based on solicitation requirements, utilizing the Supplier Performance Risk System to assess item and price risk. The contractor is responsible for all inspection and quality assurance at the point of origin, with records maintained for 365 days following final delivery. Physical identification must adhere to MIL-STD-130, Rev N, and packaging must comply with MIL-STD-2073, with specific standards for domestic and overseas shipments. Any design or part number changes require written approval from the contracting officer, except for identical part number updates. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, hazardous material identification, and trade agreements.

Fluid Power Pump and Motor Manufacturing

POSTED

DEADLINE

WIPER ASSEMBLY,OPTI — 1240015315140 — SPRMM127QKA80

Solicitation # SPRMM127QKA80

Solicitation SPRMM127QKA80, issued by the Department of the Navy via NAVSUP Weapons Systems Support, is a request for the procurement of one Wiper Assembly, Opti (NSN 1240-01-531-5140). The acquisition is categorized under NAICS code 333314. Award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. While the solicitation mentions Lowest Price Technically Acceptable criteria, it also indicates a single award process where past performance, evaluated via the Supplier Performance Risk System, is considered more important than price. The contractor is responsible for all inspection and quality assurance, with both inspection and acceptance occurring at the origin. Technical data and drawings are not available for this item. Deliverables must adhere to MIL-STD-130 for marking and MIL-STD-2073 for packaging, with shipment marking complying with MIL-STD-129. Payment requests and receiving reports must be submitted electronically through the Wide Area Workflow system. The contract incorporates various Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, including requirements for CMMC compliance, Buy American preferences, and the prohibition of hexavalent chromium.

Optical Instrument and Lens Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS