Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Waterproof/Opaque Packaging Services

Open

Federal

Response Deadline11/19/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Defense, specifically DLA Weapons Support Land Supplier Opns, involves the provision of specialized packaging materials and sealing services for prime contractors. The scope of work requires sealing items in medium-duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, MIL-STD-2073-1E, and RP001 standards. Additionally, the contractor must apply precise markings using industrial sealing and labeling systems as mandated by MIL-STD-129 and MIL-STD-130N to ensure all units are shipment-ready. The project is categorized under NAICS code 326199 and will be performed in Tracy, California. Interested parties should note that the solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026. The final deliverable consists of individually sealed and marked units that meet all specified military packaging and labeling requirements.

General Info

DoD subcontract for specialized military packaging and labeling services in Tracy, California.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

326199 - All Other Plastics Product Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-27-T-2421.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PACKING, PREFORMED

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 09:00:00 AM PSTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized packaging materials and performs sealing services for prime contractors on DLA Weapons Support Land Supplier Opns projects. Seals items in medium-duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, MIL-STD-2073-1E, and RP001. Applies markings per MIL-STD-129 and MIL-STD-130N using industrial sealing and labeling systems. Delivers individually sealed and marked units ready for shipment.

Similar Contracts

Same NAICS industry code

Molded Skid / Skid Assembly ProductionThis subcontract, issued by the Department of Defense through the Red River Receiving Building, requires the manufacture and delivery of 100 completed molded skids. The production must strictly adhere to NSN 6920-01-168-6145 requirements and the DLA Master List of Technical and Quality Requirements. The contractor must possess molding equipment capable of meeting specific geometry and material specifications, with all items packaged according to ASTM D3951 standards to support prime contractors delivering DLA Troop Support Construction and Equipment contracts. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 326199, with the place of performance located in Texarkana, Texas. Interested parties must respond by November 19, 2026.

RED RIVER RECEIVING BLDG

POSTED

about 3 hours ago

DEADLINE

Supply of Nonmetallic Round Section Seals (NSN 5330-01-073-3160)This subcontract involves the supply of 20 nonmetallic round section seals, identified by NSN 5330-01-073-3160, for prime contractors supporting the Defense Logistics Agency under the Department of Defense. The contractor is responsible for manufacturing or sourcing these seals and ensuring they meet strict marking and packaging standards, specifically MIL-STD-130N, MIL-STD-2073-1E, MIL-STD-129, and SPI 12285103-2. Packaging must utilize medium duty, waterproof, greaseproof, and opaque bags to provide necessary UV protection. Performance will take place in Tracy, California, under NAICS code 326199. To be eligible, the provider must maintain CMMC Level 2 and NIST SP 800-171 compliance. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

Nonmetallic Tubing Manufacturer/SupplierThis subcontract involves the manufacture and supply of 1,505 units of precision nonmetallic tubing for prime contractors working on government procurement projects for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The tubing must be produced with an internal diameter of 0.128 inches and an overall length of 1.5 inches, adhering to a strict tolerance of +/- 0.016 for both wall thickness and internal diameter. Compliance with MIL-STD-129, Section 5.2.1 is required for applying shelf-life markings to all unit, intermediate, and exterior containers. The project is categorized under NAICS code 326199, with the place of performance located in New Cumberland. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

QPL/QML Nonmetallic Hose Components SupplyThis subcontract involves the supply of QPL/QML certified nonmetallic tubing and fittings to support prime contractors for the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work requires the provision of components explicitly listed on the Qualified Products List or Qualified Manufacturers List in accordance with procurement note RQ016, including the delivery of all necessary qualification documentation and certified raw components. The project is categorized under NAICS code 326199 and mandates strict adherence to the Buy American and Balance of Payments Program. Performance for this contract will take place in Tracy, California. Interested parties should note the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Nonmetallic Hose Material SupplyThis subcontract involves the supply of raw nonmetallic tubing and hose materials for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The selected provider must deliver raw nonmetallic hose stock that is fully compatible with Lake Shore Systems and Parker-Hannifin specifications. A critical requirement of the agreement is the guarantee that no mercury has been intentionally added to any of the provided materials. To ensure quality and compliance, the supplier is required to provide comprehensive material certifications and Mill Test Reports. The performance of this contract is centered in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 19, 2026, as specified in the solicitation.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Raw Material Supplier for Preformed Packing (NSN 5330-01-087-1957)This subcontract involves the supply of raw elastomer, polymer, or composite materials for preformed packing under NSN 5330-01-087-1957 to support the DLA Weapons Support Fluid Handling Division. The selected supplier must provide raw material stock that adheres strictly to OEM drawing chemical and physical properties, ensuring a minimum shelf life of 36 months. All deliveries require full traceability and comprehensive Material Certifications confirming that the supplies are free of asbestos and Class I ozone-depleting chemicals. The project is managed by the Department of Defense with performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, regarding this opportunity categorized under NAICS code 326199.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Supplier of High-Performance Nonmetallic Tubing/Hose MaterialThis subcontract opportunity is for a supplier to provide raw nonmetallic tubing and reinforced hose material to prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider must ensure all materials adhere to the chemical and pressure specifications outlined in the DLA Master List and deliver the raw materials directly to the assembly manufacturer. The contract requires strict compliance with FAR 52.223-3, necessitating the delivery of certificates of conformance, traceability documentation, and material safety data sheets. This is a total small business set-aside under NAICS code 326199, with the place of performance located at Robins Air Force Base.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Manufacturing of Preformed O-Ring Packing (NSN 5331-01-120-1452)This subcontract involves the manufacturing of 66 preformed O-ring packing units for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for molding or machining the components to meet NSN 5331-01-120-1452 and RA001 technical specifications. Strict material standards are required, ensuring that all products are free of mercury and asbestos and possess a shelf-life of 180 months. The project prohibits the use of additive manufacturing unless specific authorization is granted. Performance will take place in Tracy, California, under NAICS code 326199. Interested parties must respond by November 19, 2026, to provide compliant finished goods that meet all Department of Defense requirements.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Specialized Nonmetallic Hose Material SupplyThis subcontract involves the supply of raw nonmetallic tubing and polymer materials for prime contractors working on projects for the Department of Defense DLA Weapons Support Fluid Handling Division. The materials must strictly adhere to the design control specifications for NSN 4720011444524 and be delivered alongside Mill Test Reports. Performance for this contract is centered at Hunter AAF. Compliance is a critical component of this agreement, requiring certification that all materials are free of Class I ozone-depleting chemicals. Additionally, the supplier must ensure all materials are compliant with DFARS 252.225-7001 Buy American requirements. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Supply of High-Performance Nonmetallic Tubing/Hose MaterialThis subcontract involves the supply of high-performance raw nonmetallic tubing and reinforced hose material for prime contractors working on projects for the Department of Defense DLA Weapons Support Fluid Handling Division. The materials must strictly adhere to NSN 4720012566496 specifications and be produced without the use of Class I ozone-depleting chemicals. Additionally, the supplier is required to provide Safety Data Sheets in compliance with 29 CFR 1910.1200(g) and deliver certified raw materials directly to the manufacturer. The project falls under NAICS code 326199 and is centered in New Cumberland. Interested parties should note the response deadline of November 19, 2026, following the posting date of November 8, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

O-Ring Manufacturer (NSN 5331-01-053-1946)This subcontract involves the manufacture and supply of 115 O-Rings under NSN 5331-01-053-1946 for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The parts must be manufactured in strict accordance with MIL-DTL-117, Type II, Class C, Style 1 and FED-STD-313. Quality assurance is required through zero-based sampling following MIL-STD-1916 or ASQ H1331 standards. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129, with mandatory shelf-life marking included. The final deliverables are to be shipped to Tracy, California. This opportunity falls under NAICS code 326199 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Specialized Nonmetallic Hose Material SupplyThis subcontract involves the supply of raw nonmetallic hose and tubing material for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The materials are intended for critical application items and must strictly adhere to the chemical and physical specifications outlined in Drawing 19207 12365278. Performance for this contract will take place in Anniston, Alabama. The supplier is required to deliver certified materials accompanied by Mill Test Reports and Safety Data Sheets in compliance with 29 CFR 1910.1200. This opportunity falls under NAICS code 326199, with a response deadline set for November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Accessories Stowage Basket Fabrication and SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, requires the fabrication and supply of seven Accessories Stowage Baskets (NSN 2541016449257). The selected provider must manufacture the items according to specific technical data, conduct first article approval testing on three units, and ensure all packaging adheres to MIL-STD 129 and ASTM D3951 standards. Performance for this contract will take place in Texarkana, Texas. To be eligible, contractors must maintain a quality system certified under SAE AS9003 or ISO 9001 and hold US/Canada Joint Certification Program certification. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332312. Interested parties must submit their responses by November 19, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 3 hours ago

DEADLINE

Defense-Compliant Packaging and Crating ServicesThis subcontract for Defense-Compliant Packaging and Crating Services involves providing specialized packaging, marking, and palletization for prime contractors supporting DLA Weapons Support Land projects. The scope of work requires the processing of four hardware units using MIL-SPEC materials and industrial labeling equipment to ensure full compliance with ASTM D3951 packaging standards, MIL-STD-129 marking and labeling requirements, and RP001 DLA palletization guidelines. The completed units are to be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This opportunity is managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support agency, falling under NAICS code 488410. The response deadline for this requirement is November 19, 2026.

Motor Vehicle Towing

POSTED

about 3 hours ago

DEADLINE

Manufacturing of Rigid Connecting Links (PN: A05-27895-000)This subcontract involves the manufacture of four finished and inspected rigid connecting links, part number A05-27895-000, for prime contractors supporting DLA Weapons Support Land projects. The fabrication process requires CNC milling and turning to ensure all components meet the technical and quality specifications outlined in the DLA Master List RA001. The contractor must adhere to strict regulatory standards, including the Buy American Act and the Berry Amendment for material sourcing, as well as NIST SP 800-171 cybersecurity standards. Performance will take place in New Cumberland, Pennsylvania, under the oversight of the Department of Defense.

POSTED

about 3 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract involves providing technical testing services for prime contractors supporting DLA Weapons Support Land projects. The scope of work focuses on conducting First Article Testing on two units followed by Production Lot Testing to ensure quality conformance with the Technical Data Package. The successful contractor is responsible for delivering a First Article Test Report and validated results from the production lot testing. The project is managed under the Department of Defense and requires strict adherence to ITAR and EAR compliance, as well as JCP certification for necessary data access. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

Metal Casting and Tooling for Vehicular FendersThis subcontract involves the metal casting and tooling of 30 vehicular fenders for the Department of Defense, specifically supporting DLA Weapons Support Land projects. The selected provider is responsible for producing the fenders according to the specified Technical Data Package and must develop and maintain all necessary production tooling. Final deliverables include the finished fenders and a Certificate of Quality Compliance. To be eligible, contractors must hold JCP certification and adhere to ISO 9001 or SAE AS9003 quality standards, along with CMMC Level 2 compliance. The use of additive manufacturing is strictly prohibited for this project. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 331511.

POSTED

about 3 hours ago

DEADLINE

Structural Channel Supply (NSN 2590-01-6573537)This subcontract involves the manufacture or sourcing of 18 structural channels to support prime contractors delivering on Department of Defense contracts for the DLA Weapons Support Land Supplier Operations Vehicle Support. The required items must match NSN 2590-01-6573537 and Wing Inflatables Inc 1GTC0 part number 1600147. All deliverables must strictly adhere to the DLA Master List of Technical and Quality Requirements, with packaging completed in accordance with MIL-STD-2073-1E. Performance for this contract is located in New Cumberland, Pennsylvania, under NAICS code 332312.

Fabricated Structural Metal Manufacturing

POSTED

about 3 hours ago

DEADLINE

Defense-Compliant Packaging and Marking ServicesThis subcontract for Defense-Compliant Packaging and Marking Services supports the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support project. The scope of work involves providing specialized packaging and marking for 60 units of hub clamps, ensuring all items are palletized and ready for transport to DLA Distribution DDSP New Cumberland. The contractor must adhere to strict military standards, specifically packaging per MIL-STD-2073-1E, marking shipments per MIL-STD-129, and palletizing according to RP001. Additionally, all deliverables must maintain full compliance with QUP:001 and PRES MTHD:10 standards to meet agency requirements.

Freight Transportation Arrangement

POSTED

about 3 hours ago

DEADLINE

Manufacturing of Clamp, Hub (NSN 3040-01-106-7301)This subcontract involves the manufacturing of 60 hub clamps under NSN 3040-01-106-7301 for the DLA Weapons Support Land Supplier Operations Vehicle Support. The contractor is required to fabricate the units using precision machining according to the provided technical data package, with a strict prohibition on the use of additive manufacturing. Quality assurance must be performed in accordance with MIL-STD-1916 or ASQ H1331 to ensure all finished units meet the necessary specifications. To be eligible for this project, the contractor must hold JCP certification for technical data access and maintain CMMC Level 2 compliance. The scope of work concludes with the delivery of 60 fully finished and inspected hub clamps. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

POSTED

about 3 hours ago

DEADLINE

Plain Seal SupplyThis subcontract involves the manufacture or sourcing of two plain seals matching NSN 5330016974589 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The contractor is responsible for delivering the items in medium duty, waterproof, greaseproof, and opaque bags, while ensuring full supply chain traceability documentation in accordance with DLA Directive Procurement Note C03. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 339112. To facilitate delivery and logistics, the contractor must be registered via the DLA Account Management and Provisioning System to utilize the Vendor Shipment Module. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

Military-Grade Packaging and Labeling for Vehicular ComponentsThis subcontract involves providing specialized packaging and marking services for vehicular components supporting DLA Weapons Support projects. The contractor is responsible for utilizing ASTM D3951 materials to ensure components are protected from damage during transit and applying all necessary markings and labels in strict accordance with MIL-STD-129 and RP001 standards. The final deliverables consist of brackets that are fully packaged and labeled for FOB Origin shipment to DLA Distribution DDSP New Cumberland. Managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support agency, the project falls under NAICS code 561910. The performance of these services is centered in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 19, 2026, to be considered for this military-grade logistics requirement.

Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

Precision Machining and Fabrication of Vehicular Component BracketsThis subcontract involves the precision machining and fabrication of 20 vehicular component brackets for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The contractor is required to produce the brackets according to NSN 2590-01-525-4736 and provided TDP drawing revisions using CNC, milling, or turning equipment. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332710. Strict quality and environmental standards apply to this project, including a prohibition on Class I ozone-depleting chemicals. The contractor must maintain SAE AS9003 or ISO 9001 quality systems and adhere to MIL-STD-1916 or ASQ H1331 sampling protocols. The final deliverable consists of 20 finished brackets.

POSTED

about 3 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

O-Ring Supplier (NSN 5331016170746)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Nonmetallic Channel Manufacturing and Supply

POSTED

about 3 hours ago

DEADLINE

Special Shaped Nonmetallic Seal Supplier

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

Supply of Resilient/Dampening Components for Utility Mounts

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

High-Performance Cushioning Material Supply

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Precision Gasket Manufacturing

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Supply of Electrical Insulation Sleeving

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Plain Encased Seal Supplier (NSN 5330-01-424-6586)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

PRI-QPL Accredited O-Ring Manufacturing

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

LUMBER, NON-WOOD, TIMBER

Solicitation # SPE8E5-27-T-0444

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0544

RED RIVER RECEIVING BLDG

POSTED

about 3 hours ago

DEADLINE

BASKET, ACCESSORIES STO

Solicitation # SPE7L3-27-T-2461

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS