Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-STD 2073 Packaging and Crating

Active

Federal

Response Deadline10/27/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized packaging and marking services for prime contractors supporting Navsup Weapon Systems Support under the Department of Defense. The scope of work focuses on the preparation of repaired receivers, requiring the use of MIL-SPEC anti-static bags, custom crates, and specific cushioning materials to ensure compliance with MIL-STD 2073 standards. Additionally, the contractor is responsible for applying all necessary government shipment markings and labels tailored for sensitive electronics. The primary objective is to deliver fully packaged and marked units that are ready for immediate shipment to the final consignee. This opportunity falls under NAICS code 488410 and was posted on October 22, 2026, with a response deadline of October 27, 2026.

General Info

Subcontract for MIL-SPEC packaging and marking of repaired receivers for Department of Defense.

Agency

Department Of Defense → Navsup Weapon Systems Support

NAICS

488410 - Motor Vehicle Towing

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0038327QMA09.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RECEIVER,COUNTERMEA

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 27

Submission deadline

Response Deadline

10/27/2026, 08:30:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging and marking services for prime contractors on Navsup Weapon Systems Support projects. Packages repaired receivers using MIL-SPEC anti-static bags, custom crates, and cushioning in accordance with MIL-STD 2073. Applies required government shipment markings and labels for sensitive electronics. Delivers fully packaged and marked units ready for shipment to the consignee.

Similar Contracts

Same NAICS industry code

MIL-STD-2073 Packaging and ShippingThis subcontract with the Department of Defense, specifically for Navsup Weapon Systems Support Mech, involves the provision of specialized packaging materials and packing services for repaired mounts. The contractor is responsible for implementing packaging methods in accordance with MIL-STD-2073 and ensuring that all hazardous materials are identified per FED STD 313 and OSHA 29 CFR 1910.1200. To ensure equipment protection, the use of MIL-SPEC crates, cushioning, and moisture barriers is required, with all items delivered securely on an FOB Destination basis. The opportunity is categorized under NAICS code 488410 and was posted on October 22, 2026. Interested parties must submit their responses by the deadline of November 23, 2026. This contract focuses on maintaining strict military specifications for the transport of critical components to prime contractors.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Military Preservation, Packaging, and Marking ProviderThis subcontract opportunity is for a Military Preservation, Packaging, and Marking Provider to support prime contractors on U.S. Navy projects for the Department of Defense, specifically under the Navsup Weapon Systems Support Mech. The selected provider will be responsible for the preservation, packaging, and delivery of actuators, ensuring all items are processed according to WSSTERMDZ03 and MIL-STD-130 standards using military-grade materials. Key technical requirements include the application of Depot Level Repairable labels and Special Material Identification Codes to meet NAVSUP WSS Maritime specifications. To be eligible, the packaging facility must possess a valid CAGE code. The solicitation was posted on October 22, 2026, with a response deadline of November 23, 2026. This requirement falls under NAICS code 488410 and focuses on specialized logistics and material handling to ensure equipment is properly marked and protected for military use.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Mechanicsburg supply contracts under the Department of Defense. The scope of work involves providing specialized packaging, marking, and palletization services to ensure shipments are ready for FOB Destination delivery. All activities must strictly adhere to MIL-STD-2073 and MIL-STD-129 standards for packaging and marking. Technical requirements include the use of MHI-2016 Part No. MHI/9-07SW4848 pallets, with all wood packaging materials treated according to ISPM 15 and ALSC standards. The opportunity is categorized under NAICS code 488410, with a response deadline set for November 12, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

about 4 hours ago

DEADLINE

Military Standard Packaging and Marking ServicesThis subcontract for Military Standard Packaging and Marking Services supports prime contractors on projects for the Department of Defense agency Navsup Weapon Systems Support. The scope of work involves providing specialized preservation, packaging, and marking services, specifically requiring the delivery of four cranes packaged and labeled for government acceptance. The contractor must adhere to strict military specifications, including MIL-STD-2073 for preservation and packaging, MIL-STD-129 for shipping container marking, and MIL-STD-130 for the application of Unique Item Identification labels using industrial marking tools. The opportunity was posted on October 22, 2026, with a response deadline of November 23, 2026, under NAICS code 488410.

Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Heavy-Duty Vehicle Recovery and TransportThis subcontract for Heavy-Duty Vehicle Recovery and Transport supports prime contractors on NAVFAC Far East projects within Japan. The scope of work involves providing specialized transportation and towing services, specifically for disabled fire apparatus and other vehicles, between the Navy installations in Yokosuka, Atsugi, and Sasebo. To ensure the safe delivery of vehicles to designated locations, the contractor must utilize heavy-duty tow trucks and wreckers. Qualified providers must possess valid Japanese commercial driving licenses and obtain the necessary authorizations to access military installations. This opportunity falls under NAICS code 488410 and is managed by the Department of Defense through Navfacsyscom Far East. Interested parties should note the response deadline of November 24, 2026.

Navfacsyscom Far East

POSTED

about 4 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Troop Support Construction and Equipment MRO projects. The scope of work involves specialized packaging, marking, and palletization of units in strict accordance with ASTM D3951, MIL-STD-129, and RP001 DLA guidelines. The provider must utilize DLA-approved materials and compliant labeling systems to ensure all units are shipping-ready for delivery to the DLA Distribution DDSP New Cumberland Facility. Managed under NAICS code 488410 for the Department of Defense, the project is centered in New Cumberland. Interested parties should note the response deadline of November 2, 2026. The contract emphasizes rigorous adherence to military specifications to ensure the integrity and traceability of equipment being processed for the Construction and Equipment MRO service.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 23 hours ago

DEADLINE

Aerospace Component Packaging and ShippingThe Aerospace Component Packaging and Shipping subcontract involves providing military-grade packaging services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires packaging components according to ASTM D3951, labeling and marking shipments in compliance with MIL-STD-129, and executing palletization based on RP001 standards using MIL-SPEC materials. The final objective is to deliver shipments that are fully packaged and labeled for acceptance at the origin. This project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Robins Air Force Base. The opportunity is categorized under NAICS code 488410 and was posted on October 21, 2026, with a response deadline of October 29, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the DLA Weapons Support Land Supplier Opns Engines agency. The contractor is responsible for providing specialized military-grade packaging and marking for two cylinder sleeves, ensuring all precision engine components are handled according to MIL-STD-2073-1E and MIL-STD-129 standards. The scope of work includes implementing specific preservation and cushioning methods while strictly prohibiting the use of mercury or Class I ozone-depleting chemicals. The project is categorized under NAICS code 488410 and will be performed in Tracy, California. Deliverables are to be packaged and marked for FOB Origin shipment. Interested parties must note the response deadline of November 2, 2026, for this specialized military support requirement.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 23 hours ago

DEADLINE

Specialized UV-Protective Packaging Services

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Opaque Packaging and PreservationThis subcontract for the DLA Weapons Support Nuclear Reactor Program involves providing specialized packaging and preservation services for O-rings. The contractor is responsible for individually packaging units in accordance with SAE AMS2817 and utilizing opaque bags to prevent UV ray exposure as mandated by MIL-DTL-117. All general preparation for delivery must adhere to MIL-STD-2073-1E to ensure the components are ready for shipment. The project is managed under the Department of Defense and will be performed in Bremerton, Washington. Interested parties must respond by November 2, 2026, regarding this requirement categorized under NAICS code 488410.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Marking

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Defense-Compliant Packaging and Marking ServicesThis subcontract for Defense-Compliant Packaging and Marking Services supports the DLA Weapons Support Land Supply Chain. The scope of work involves providing specialized packaging, palletization, and marking for non-hazardous materials to be delivered to DLA Distribution Corpus Christi. The project requires the delivery of 20 units of hardware, ensuring all work adheres to strict military and industry standards, specifically ASTM D3951 for packaging, RP001 for palletization, and MIL-STD-129 and MIL-STD-130N for industrial labeling and markings. The opportunity is categorized under NAICS code 488410 and is managed under the Department of Defense. Interested parties must note the response deadline of November 2, 2026. Performance of the contract will take place in Corpus Christi, Texas, within the 78419-5255 zip code area.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of Defense agency Navsup Weapon Systems Support. The scope of work involves providing military-grade preservation, packaging, and marking for electronic components, specifically transmitters, to ensure they are ready for shipment. All activities must adhere to strict military standards, including MIL-STD-2073 for packaging and MIL-STD-129-P for marking and barcoding. The service provider is required to utilize industrial barcoding equipment and MIL-SPEC materials to apply DLR labels and FMS-specific requisition number barcoding. This opportunity falls under NAICS code 488510, with a response deadline set for November 23, 2026.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Induction Transmitter Supplier (NSN 1RM 6605-99-330-2351 H1)This subcontract involves the supply of induction transmitters for prime contractors supporting Navsup Weapon Systems Support projects. The selected supplier is responsible for manufacturing or sourcing components that strictly adhere to NSN 1RM 6605-99-330-2351 H1 specifications and meet all Shelf Life 0-00 requirements. To be eligible, contractors must obtain government source approval from NAVSUP WSS and maintain ISO 9001 quality management certification. Additionally, strict adherence to NIST SP 800-171 cybersecurity standards is required for the handling of Controlled Unclassified Information. The final deliverable for this engagement is the physical induction transmitter.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month

ANSI/NCSL Z540-03 Calibration ServicesThis subcontract involves providing specialized calibration services for electronic test and measurement equipment used by prime contractors on Navsup Weapon Systems Support projects. The scope of work specifically focuses on equipment utilized in the radio modulator repair process, requiring all calibrations to be performed using NIST-traceable standards. To ensure technical compliance and quality, the service provider must hold accreditation to either ANSI/NCSL Z540-03 or ISO/IEC 17025. The primary deliverables for this engagement include the return of calibrated test equipment along with the corresponding calibration certificates. This opportunity falls under NAICS code 811210 and is associated with the Department of Defense. Interested parties should note the response deadline of October 27, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

Specialized Electronic Component SupplierThis subcontract involves the supply of specialized electronic components, including capacitors, transistors, and circuit boards, to support prime contractors working on Navsup Weapon Systems Support projects for the Department of Defense. A primary focus of the agreement is the sourcing of authentic components for part number 2687200G002, with a strict requirement for Certificates of Conformance and full traceability documentation to mitigate the risk of counterfeit parts. The supplier is responsible for ensuring all items are packaged and marked in accordance with MIL-STD-2073-1 and MIL-STD-129 standards. Final deliverables consist of certified electronic components delivered directly to the designated repair facility. The contract falls under NAICS code 423610 and was posted on October 22, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Radio Modulator Repair and Testing ServicesThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the technical repair, overhaul, and testing of Radio Modulators, specifically NSN 5865-01-663-1882. The selected contractor will be responsible for performing diagnostic testing, component-level replacement, and reassembly in strict accordance with technical publications to ensure the equipment is delivered in Ready for Issue condition. To qualify, the provider must hold Government source approval and maintain ISO 9001 or SAE AS9100 certification. All work must utilize calibration systems that comply with ANSI/NCSL Z540-03 standards. This opportunity falls under NAICS code 811219, with a response deadline set for October 27, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

Control Generator Replacement Parts and MaterialsThis subcontract involves the provision of OEM or approved equivalent replacement materials and components for prime contractors working on U.S. Navy NAVSUP Weapon Systems Support projects. Specifically, the contract focuses on supplying parts for NSN 7RH 6110-01-585-4820 P8 in accordance with Hamilton Sundstrand Corp drawings. All delivered individual replacement components must be certified and delivered directly to the designated repair facility. To ensure operational readiness and quality control, all supplied parts must strictly adhere to RFI standards and comply with MIL-STD-130 marking requirements. The procurement falls under NAICS code 423840 and is managed under the Department of Defense.

Industrial Supplies Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Control Generator Overhaul and RFI RestorationThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the overhaul and RFI restoration of 15 Control Generators. The selected contractor will be responsible for the complete teardown, evaluation, repair, modification, and testing of these units for prime contractors on U.S. Navy projects. All work must be performed in an enclosed warehouse using contractor-provided fixtures and special test equipment, with disassembly and inspection conducted according to approved manuals and Hamilton Sundstrand Corp drawings. To be eligible for this project, the contractor must hold ISO 9001 or SAE AS9100 certification. The primary objective is the delivery of 15 overhauled Control Generators in Ready For Issue condition. This opportunity falls under NAICS code 811210 and requires a response by October 27, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

Supply of Replacement Parts for Pneumatic Test SetThis subcontract involves the supply of replacement seals, valves, and hardware required for the overhaul of part number f70337-1 in support of Navsup Weapon Systems Support projects. The selected provider is responsible for manufacturing or sourcing flight-critical pneumatic components for part numbers f70337-1 and f71429-500, ensuring all items strictly adhere to OEM specifications and technical publications. To qualify, the contractor must meet all NAVSUP WSS Source Approval requirements and is tasked with delivering certified replacement parts directly to the designated repair facility. This effort falls under NAICS code 332999 and supports the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Calibration and Certification Services for Pneumatic Test SetThis subcontract for the Department of Defense involves providing calibration and certification services for pneumatic test sets supporting Navsup Weapon Systems Support projects. The selected contractor will be responsible for the final testing, inspection, and precision calibration of gauges, valves, and sensors. All work must be performed using NIST-traceable standards and precision pressure testing equipment in strict accordance with ANSI/NCSL Z540.3 or ISO-10012-1 standards. The primary deliverables for this engagement include the provision of detailed calibration certificates and a certified Ready For Issue inspection report. This opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Pneumatic Test Set Component Repair and OverhaulThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the technical repair, overhaul, and upgrade of pneumatic test sets, specifically part number f70337-1. The scope of work includes the disassembly, inspection, and reassembly of units, with a focus on replacing worn pneumatic components according to technical publications to ensure the final product is delivered in Ready For Issue condition. To qualify for this project, contractors must possess specialized pneumatic tooling and maintain ISO 9001 or SAE AS9100 certification. The opportunity was posted on October 22, 2026, with a response deadline of November 23, 2026, and is categorized under NAICS code 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Electronic Component Supply (Discrete I/O Module Parts)This subcontract, titled Electronic Component Supply (Discrete I/O Module Parts), involves the procurement of new and authentic electronic components to support prime contractors on U.S. Navy NAVSUP Weapon Systems Support projects. The scope of work focuses on sourcing capacitors, resistors, and integrated circuits that are compatible with part number 17099733A according to Chamilton Sundstrand Corp drawings. All supplied materials must be new in accordance with FAR 52.211-5 and must strictly adhere to MIL-STD-130 marking requirements. The selected provider is responsible for the delivery of these components directly to the designated repair facility. This opportunity falls under NAICS code 423610 and is managed under the Department of Defense.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Discrete I/O Module Repair and Overhaul ServicesThis subcontract for Discrete I/O Module Repair and Overhaul Services supports U.S. Navy NAVSUP Weapon Systems Support projects. The selected contractor will be responsible for the teardown, evaluation, repair, and modification of modules, following specific Chamilton Sundstrand Corp drawings and repair manuals. The scope of work includes disassembling, cleaning, and inspecting modules, as well as performing component-level repairs and testing utilizing contractor-provided tooling to deliver certified Ready for Issue modules. To ensure technical compliance, the contractor must maintain ISO 9001 or SAE AS9100 quality systems and adhere to ANSI/NCSL Z540.3 calibration standards. This opportunity falls under NAICS code 334418 and is managed under the Department of Defense. Interested parties should note the response deadline of October 27, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS