Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Calibration and Certification Services for Pneumatic Test Set

Active

Federal

Response Deadline11/23/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Defense involves providing calibration and certification services for pneumatic test sets supporting Navsup Weapon Systems Support projects. The selected contractor will be responsible for the final testing, inspection, and precision calibration of gauges, valves, and sensors. All work must be performed using NIST-traceable standards and precision pressure testing equipment in strict accordance with ANSI/NCSL Z540.3 or ISO-10012-1 standards. The primary deliverables for this engagement include the provision of detailed calibration certificates and a certified Ready For Issue inspection report. This opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

General Info

DoD subcontract for pneumatic test set calibration and certification due November 23, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0038327QLA15.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TEST SET,PNEUMATIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 08:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs final testing, inspection, and precision calibration of pneumatic test sets for prime contractors on Navsup Weapon Systems Support projects. Calibrates gauges, valves, and sensors using NIST-traceable standards and precision pressure testing equipment. Adheres to ANSI/NCSL Z540.3 or ISO-10012-1 standards. Delivers calibration certificates and a certified Ready For Issue (RFI) inspection report.

Similar Contracts

Same NAICS industry code

NDT and Quality Inspection ServicesThis subcontract for NDT and Quality Inspection Services supports prime contractors on DLA Aviation fuel valve projects for the Department of Defense. The scope of work involves performing critical quality assurance and non-destructive testing, specifically utilizing Fluorescent Penetrant Inspection, Magnetic Particle Inspection, and hydrostatic pressure testing. All work must be conducted using calibrated equipment by certified NDT technicians to ensure technical compliance. The selected provider is responsible for delivering detailed inspection reports and certifications of conformance. This opportunity is categorized under NAICS code 541380 and is associated with DLA Aviation in Oklahoma City. The response deadline for this requirement is November 21, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Specialized Inspection and Testing ServicesThe Specialized Inspection and Testing Services subcontract involves providing independent quality assurance and non-destructive testing for prime contractors on Department of the Navy projects. The scope of work focuses on conducting visual inspections of weld joints according to MIL-STD-2035 and performing dimensional inspections per DI-MDTI-808089B utilizing precision measuring instruments and CMM. Qualified providers must hold Certified Weld Inspector credentials to deliver essential documentation, including conformance inspections, final assembly dimensional reports, and weld joint visual inspection reports. This opportunity is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with a response deadline set for December 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) & Validation ServicesThis subcontract for First Article Testing (FAT) and Validation Services supports prime contractors on Army Contracting Command Detroit Arsenal projects. The scope of work involves performing independent testing and validation, specifically focusing on airflow, vibration, noise, and stress testing, as well as dimensional inspections against the Technical Data Package. To execute these tasks, the contractor will utilize specialized equipment including wind tunnels, vibration tables, and precision Coordinate Measuring Machines. The selected provider must hold ISO/IEC 17025 accreditation and DD 2345 certification to ensure technical compliance. Key deliverables for this engagement include the submission of a First Article Test Report and a formal certification of compliance. This opportunity is categorized under NAICS code 541380 and is managed through the Department of Defense.

POSTED

about 4 hours ago

DEADLINE

NDT and Mechanical Testing for Special Emphasis FastenersThis subcontract involves providing non-destructive and destructive mechanical testing for special emphasis fasteners on behalf of prime contractors for Navsup Weapon Systems Support Mech shipboard projects. The scope of work includes performing liquid penetrant inspections and wedge tensile testing in strict accordance with T9074 AS-GIB-010/271, MIL-DTL-1222, and ASTM-F606 standards. To qualify, the contractor must maintain ISO/IEC 17025 accreditation and utilize ISO 10012 calibrated tools. Deliverables for this engagement consist of certified test reports and certification data submitted via DD Form 1423. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

CSI Certification and Data Reporting ServicesThis subcontract for CSI Certification and Data Reporting Services involves providing specialized inspection and certification for prime contractors working on US Navy Critical Safety Item projects. The scope of work requires the verification of critical characteristics according to the Technical Data Package and the application of DI-MISC-80678 data requirements. The selected provider is responsible for preparing Certification and Data Reports and submitting all necessary information through the Electronic Contractor Data Submission system using PKI Digital Certificates. Final deliverables include a validated Certificate of Compliance and a completed Certified Data Report. This effort is managed under the Department of Defense via the Navsup Weapon Systems Support Mech.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Validation (Nuclear C Seal)This subcontract for the Department of Defense and Navsup Weapon Systems Support Mech involves the first article testing and validation of nuclear C seals. The selected contractor will perform both destructive and non-destructive testing to verify that material properties and dimensional accuracy align with TDP Version 002 and IRPOD requirements. All work must be conducted using certified NDE tools and adhere strictly to MIL-I-45208 quality standards. The primary objective of the contract is to produce certified test reports and supporting data necessary for the submission of DD Form 1423. This opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Countermeasure Receiver RFI Testing and CertificationThis subcontract for Navsup Weapon Systems Support involves providing final performance testing and inspection services for prime contractors. The scope of work focuses on the RFI certification of Countermeasure Receivers, utilizing calibrated measurement tools and specialized test tooling. Additionally, the contractor is responsible for conducting dimensional readings in accordance with 46 CFR 51 and creating sequential process diagrams. To be eligible, the contractor must hold ISO 9001 or SAE AS9100 certification. The primary deliverables for this engagement are the RFI Certification and a Final Inspection Report. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

NDT and Hydrostatic Testing Services for Level I ComponentsThis subcontract involves providing independent non-destructive testing and hydrostatic pressure testing for shipboard valve projects supporting the Department of Defense via NAVSUP Weapon Systems Support Mechanicsburg. The selected provider will perform ultrasonic, X-ray, or dye penetrant inspections along with pressure chamber testing to certify Special Emphasis Level I integrity. Key deliverables include the provision of certified test reports and formal compliance certifications. To be eligible, the contractor must hold ISO/IEC 17025 and ISO 10012 accreditations and maintain a Confidential security clearance. The opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Non-Destructive Testing (NDT) ServicesThis subcontract for Non-Destructive Testing (NDT) Services involves providing specialized hull and structural inspections for prime contractors working on USCG vessel projects. The scope of work focuses on conducting ultrasonic thickness measurements and side-scan ultrasonic testing of hull plating to ensure structural integrity. The selected provider will be responsible for delivering comprehensive thickness measurement data and detailed inspection reports. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work is designated for performance in Santa Barbara, California. The opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

POSTED

about 4 hours ago

DEADLINE

PRICE TERM AGREEMENT TO PROVIDE HYDROSTATIC TESTING OF MSA SCBA TANKS FOR THE HAWAII FIRE DEPARTMENT, COUNTY OF HAWAII

Solicitation # 27-0069

The County of Hawai'i, through the Hawaii Fire Department, is soliciting quotations for a Price Term Agreement to provide hydrostatic testing for 200 MSA SCBA tanks. This agreement consists of an initial one-year term ending October 31, 2027, with the possibility of four additional one-year option years at the County's discretion. All work must strictly adhere to NFPA 1852, NFPA 1850, DOT CFR 49 Part 180, OSHA 29 CFR 1910.134, CGA standards C-1, C-5, C-6, and C-8, as well as MSA G1 manufacturer specifications. The Hawaii Fire Department is responsible for the delivery and pickup of all cylinders, while the vendor must perform pre-inspection verification of markings and serial numbers, apply required hydrostatic test labels or stamps, and clearly mark any unserviceable cylinders. The contract is awarded to the lowest responsive and responsible offeror for IFB solicitations or based on best value for RFP solicitations, considering factors such as price, total cost of ownership, and technical performance. All quotations must be F.O.B. Destination, freight prepaid and allowed. Payments are processed by the County of Hawai'i Purchasing Division within 30 days of receipt of a statement for completed services, with a tax clearance requirement for contracts exceeding 25,000 dollars. Vendors must comply with state and federal laws regarding non-discrimination and campaign contributions, and must not be debarred by the State of Hawai'i or the U.S. Federal government. Submissions are handled through the OpenGov Procurement Portal, and prices must remain valid for 60 days following the submission deadline.

Hawaii Fire Department

POSTED

about 14 hours ago

DEADLINE

Structural Steel and Welding Special InspectionThis subcontract involves providing specialized structural steel and welding inspections for prime contractors working on senior housing projects managed by the Mayor's Office of Housing and Community Development in San Francisco. The scope of work includes inspecting metal stair installations and conducting structural steel fabrication inspections at shops located in Benicia, California, with a specific focus on embeds and welding. To qualify for this role, the provider must hold Certified Welding Inspector credentials. Key deliverables for the contract include the submission of detailed welding inspection reports and formal fabrication approvals. The solicitation was posted on October 21, 2026, with a response deadline of November 21, 2026.

Mayor's Office of Housing and Community Development

POSTED

about 17 hours ago

DEADLINE

Construction Materials Testing Laboratory ServicesThis subcontract opportunity is for Construction Materials Testing Laboratory Services to support prime contractors on senior housing projects managed by the Mayor's Office of Housing and Community Development in San Francisco. The selected provider will be responsible for performing critical material sampling and analysis, specifically focusing on grout testing and concrete cylinder breaks. Qualified candidates must operate an accredited testing laboratory with the capacity to manage the high volumes associated with high-rise residential construction. The primary deliverable for this engagement is the provision of certified laboratory test reports. Interested parties should note the response deadline of November 21, 2026.

Mayor's Office of Housing and Community Development

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of Defense agency Navsup Weapon Systems Support. The scope of work involves providing military-grade preservation, packaging, and marking for electronic components, specifically transmitters, to ensure they are ready for shipment. All activities must adhere to strict military standards, including MIL-STD-2073 for packaging and MIL-STD-129-P for marking and barcoding. The service provider is required to utilize industrial barcoding equipment and MIL-SPEC materials to apply DLR labels and FMS-specific requisition number barcoding. This opportunity falls under NAICS code 488510, with a response deadline set for November 23, 2026.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Induction Transmitter Supplier (NSN 1RM 6605-99-330-2351 H1)This subcontract involves the supply of induction transmitters for prime contractors supporting Navsup Weapon Systems Support projects. The selected supplier is responsible for manufacturing or sourcing components that strictly adhere to NSN 1RM 6605-99-330-2351 H1 specifications and meet all Shelf Life 0-00 requirements. To be eligible, contractors must obtain government source approval from NAVSUP WSS and maintain ISO 9001 quality management certification. Additionally, strict adherence to NIST SP 800-171 cybersecurity standards is required for the handling of Controlled Unclassified Information. The final deliverable for this engagement is the physical induction transmitter.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month

ANSI/NCSL Z540-03 Calibration ServicesThis subcontract involves providing specialized calibration services for electronic test and measurement equipment used by prime contractors on Navsup Weapon Systems Support projects. The scope of work specifically focuses on equipment utilized in the radio modulator repair process, requiring all calibrations to be performed using NIST-traceable standards. To ensure technical compliance and quality, the service provider must hold accreditation to either ANSI/NCSL Z540-03 or ISO/IEC 17025. The primary deliverables for this engagement include the return of calibrated test equipment along with the corresponding calibration certificates. This opportunity falls under NAICS code 811210 and is associated with the Department of Defense. Interested parties should note the response deadline of October 27, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

Specialized Electronic Component SupplierThis subcontract involves the supply of specialized electronic components, including capacitors, transistors, and circuit boards, to support prime contractors working on Navsup Weapon Systems Support projects for the Department of Defense. A primary focus of the agreement is the sourcing of authentic components for part number 2687200G002, with a strict requirement for Certificates of Conformance and full traceability documentation to mitigate the risk of counterfeit parts. The supplier is responsible for ensuring all items are packaged and marked in accordance with MIL-STD-2073-1 and MIL-STD-129 standards. Final deliverables consist of certified electronic components delivered directly to the designated repair facility. The contract falls under NAICS code 423610 and was posted on October 22, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Radio Modulator Repair and Testing ServicesThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the technical repair, overhaul, and testing of Radio Modulators, specifically NSN 5865-01-663-1882. The selected contractor will be responsible for performing diagnostic testing, component-level replacement, and reassembly in strict accordance with technical publications to ensure the equipment is delivered in Ready for Issue condition. To qualify, the provider must hold Government source approval and maintain ISO 9001 or SAE AS9100 certification. All work must utilize calibration systems that comply with ANSI/NCSL Z540-03 standards. This opportunity falls under NAICS code 811219, with a response deadline set for October 27, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

Control Generator Replacement Parts and MaterialsThis subcontract involves the provision of OEM or approved equivalent replacement materials and components for prime contractors working on U.S. Navy NAVSUP Weapon Systems Support projects. Specifically, the contract focuses on supplying parts for NSN 7RH 6110-01-585-4820 P8 in accordance with Hamilton Sundstrand Corp drawings. All delivered individual replacement components must be certified and delivered directly to the designated repair facility. To ensure operational readiness and quality control, all supplied parts must strictly adhere to RFI standards and comply with MIL-STD-130 marking requirements. The procurement falls under NAICS code 423840 and is managed under the Department of Defense.

Industrial Supplies Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Control Generator Overhaul and RFI RestorationThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the overhaul and RFI restoration of 15 Control Generators. The selected contractor will be responsible for the complete teardown, evaluation, repair, modification, and testing of these units for prime contractors on U.S. Navy projects. All work must be performed in an enclosed warehouse using contractor-provided fixtures and special test equipment, with disassembly and inspection conducted according to approved manuals and Hamilton Sundstrand Corp drawings. To be eligible for this project, the contractor must hold ISO 9001 or SAE AS9100 certification. The primary objective is the delivery of 15 overhauled Control Generators in Ready For Issue condition. This opportunity falls under NAICS code 811210 and requires a response by October 27, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

Supply of Replacement Parts for Pneumatic Test SetThis subcontract involves the supply of replacement seals, valves, and hardware required for the overhaul of part number f70337-1 in support of Navsup Weapon Systems Support projects. The selected provider is responsible for manufacturing or sourcing flight-critical pneumatic components for part numbers f70337-1 and f71429-500, ensuring all items strictly adhere to OEM specifications and technical publications. To qualify, the contractor must meet all NAVSUP WSS Source Approval requirements and is tasked with delivering certified replacement parts directly to the designated repair facility. This effort falls under NAICS code 332999 and supports the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Pneumatic Test Set Component Repair and OverhaulThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the technical repair, overhaul, and upgrade of pneumatic test sets, specifically part number f70337-1. The scope of work includes the disassembly, inspection, and reassembly of units, with a focus on replacing worn pneumatic components according to technical publications to ensure the final product is delivered in Ready For Issue condition. To qualify for this project, contractors must possess specialized pneumatic tooling and maintain ISO 9001 or SAE AS9100 certification. The opportunity was posted on October 22, 2026, with a response deadline of November 23, 2026, and is categorized under NAICS code 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Electronic Component Supply (Discrete I/O Module Parts)This subcontract, titled Electronic Component Supply (Discrete I/O Module Parts), involves the procurement of new and authentic electronic components to support prime contractors on U.S. Navy NAVSUP Weapon Systems Support projects. The scope of work focuses on sourcing capacitors, resistors, and integrated circuits that are compatible with part number 17099733A according to Chamilton Sundstrand Corp drawings. All supplied materials must be new in accordance with FAR 52.211-5 and must strictly adhere to MIL-STD-130 marking requirements. The selected provider is responsible for the delivery of these components directly to the designated repair facility. This opportunity falls under NAICS code 423610 and is managed under the Department of Defense.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Discrete I/O Module Repair and Overhaul ServicesThis subcontract for Discrete I/O Module Repair and Overhaul Services supports U.S. Navy NAVSUP Weapon Systems Support projects. The selected contractor will be responsible for the teardown, evaluation, repair, and modification of modules, following specific Chamilton Sundstrand Corp drawings and repair manuals. The scope of work includes disassembling, cleaning, and inspecting modules, as well as performing component-level repairs and testing utilizing contractor-provided tooling to deliver certified Ready for Issue modules. To ensure technical compliance, the contractor must maintain ISO 9001 or SAE AS9100 quality systems and adhere to ANSI/NCSL Z540.3 calibration standards. This opportunity falls under NAICS code 334418 and is managed under the Department of Defense. Interested parties should note the response deadline of October 27, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 4 hours ago

DEADLINE

Manufacturing and Supply of Sleeve Bushings (NSN 1RM 5365-31-017-6045 BL)This subcontract involves the manufacturing and supply of precision-manufactured sleeve bushings for prime contractors supporting NAVSUP Weapon Systems Support. The contractor is responsible for fabricating bushings according to NSN 1RM 5365-31-017-6045 BL specifications, ensuring all units undergo precision cleaning to meet shipboard oxygen clean requirements per MIL-STD-1330. Final deliverables must be packaged and palletized in accordance with MIL-STD-2073 and MIL-STD-147. To qualify for this engagement, the provider must maintain ISO 9001 certification and obtain Government Source Approval. The contract falls under NAICS code 332119 and is managed under the Department of Defense. Interested parties must submit their responses by the deadline of November 23, 2026.

Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS