Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing and Validation (Nuclear C Seal)

Active

Federal

Response Deadline11/23/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Defense and Navsup Weapon Systems Support Mech involves the first article testing and validation of nuclear C seals. The selected contractor will perform both destructive and non-destructive testing to verify that material properties and dimensional accuracy align with TDP Version 002 and IRPOD requirements. All work must be conducted using certified NDE tools and adhere strictly to MIL-I-45208 quality standards. The primary objective of the contract is to produce certified test reports and supporting data necessary for the submission of DD Form 1423. This opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

General Info

Testing and validating nuclear C seals for DoD per MIL-I-45208 quality standards.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010427QBB01.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL RING,NUCLEAR C

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 08:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs destructive and non-destructive testing on first-article nuclear seal rings for prime contractors on Navsup Weapon Systems Support Mech projects. Validates material properties and dimensional accuracy against TDP Version 002 and IRPOD requirements using certified NDE tools. Requires MIL-I-45208 quality standards. Delivers certified test reports and data supporting DD Form 1423 submission.

Similar Contracts

Same NAICS industry code

NDT and Quality Inspection ServicesThis subcontract for NDT and Quality Inspection Services supports prime contractors on DLA Aviation fuel valve projects for the Department of Defense. The scope of work involves performing critical quality assurance and non-destructive testing, specifically utilizing Fluorescent Penetrant Inspection, Magnetic Particle Inspection, and hydrostatic pressure testing. All work must be conducted using calibrated equipment by certified NDT technicians to ensure technical compliance. The selected provider is responsible for delivering detailed inspection reports and certifications of conformance. This opportunity is categorized under NAICS code 541380 and is associated with DLA Aviation in Oklahoma City. The response deadline for this requirement is November 21, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Specialized Inspection and Testing ServicesThe Specialized Inspection and Testing Services subcontract involves providing independent quality assurance and non-destructive testing for prime contractors on Department of the Navy projects. The scope of work focuses on conducting visual inspections of weld joints according to MIL-STD-2035 and performing dimensional inspections per DI-MDTI-808089B utilizing precision measuring instruments and CMM. Qualified providers must hold Certified Weld Inspector credentials to deliver essential documentation, including conformance inspections, final assembly dimensional reports, and weld joint visual inspection reports. This opportunity is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with a response deadline set for December 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

Calibration and Certification Services for Pneumatic Test SetThis subcontract for the Department of Defense involves providing calibration and certification services for pneumatic test sets supporting Navsup Weapon Systems Support projects. The selected contractor will be responsible for the final testing, inspection, and precision calibration of gauges, valves, and sensors. All work must be performed using NIST-traceable standards and precision pressure testing equipment in strict accordance with ANSI/NCSL Z540.3 or ISO-10012-1 standards. The primary deliverables for this engagement include the provision of detailed calibration certificates and a certified Ready For Issue inspection report. This opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month

First Article Testing (FAT) & Validation ServicesThis subcontract for First Article Testing (FAT) and Validation Services supports prime contractors on Army Contracting Command Detroit Arsenal projects. The scope of work involves performing independent testing and validation, specifically focusing on airflow, vibration, noise, and stress testing, as well as dimensional inspections against the Technical Data Package. To execute these tasks, the contractor will utilize specialized equipment including wind tunnels, vibration tables, and precision Coordinate Measuring Machines. The selected provider must hold ISO/IEC 17025 accreditation and DD 2345 certification to ensure technical compliance. Key deliverables for this engagement include the submission of a First Article Test Report and a formal certification of compliance. This opportunity is categorized under NAICS code 541380 and is managed through the Department of Defense.

POSTED

about 4 hours ago

DEADLINE

NDT and Mechanical Testing for Special Emphasis FastenersThis subcontract involves providing non-destructive and destructive mechanical testing for special emphasis fasteners on behalf of prime contractors for Navsup Weapon Systems Support Mech shipboard projects. The scope of work includes performing liquid penetrant inspections and wedge tensile testing in strict accordance with T9074 AS-GIB-010/271, MIL-DTL-1222, and ASTM-F606 standards. To qualify, the contractor must maintain ISO/IEC 17025 accreditation and utilize ISO 10012 calibrated tools. Deliverables for this engagement consist of certified test reports and certification data submitted via DD Form 1423. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

CSI Certification and Data Reporting ServicesThis subcontract for CSI Certification and Data Reporting Services involves providing specialized inspection and certification for prime contractors working on US Navy Critical Safety Item projects. The scope of work requires the verification of critical characteristics according to the Technical Data Package and the application of DI-MISC-80678 data requirements. The selected provider is responsible for preparing Certification and Data Reports and submitting all necessary information through the Electronic Contractor Data Submission system using PKI Digital Certificates. Final deliverables include a validated Certificate of Compliance and a completed Certified Data Report. This effort is managed under the Department of Defense via the Navsup Weapon Systems Support Mech.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

Countermeasure Receiver RFI Testing and CertificationThis subcontract for Navsup Weapon Systems Support involves providing final performance testing and inspection services for prime contractors. The scope of work focuses on the RFI certification of Countermeasure Receivers, utilizing calibrated measurement tools and specialized test tooling. Additionally, the contractor is responsible for conducting dimensional readings in accordance with 46 CFR 51 and creating sequential process diagrams. To be eligible, the contractor must hold ISO 9001 or SAE AS9100 certification. The primary deliverables for this engagement are the RFI Certification and a Final Inspection Report. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

NDT and Hydrostatic Testing Services for Level I ComponentsThis subcontract involves providing independent non-destructive testing and hydrostatic pressure testing for shipboard valve projects supporting the Department of Defense via NAVSUP Weapon Systems Support Mechanicsburg. The selected provider will perform ultrasonic, X-ray, or dye penetrant inspections along with pressure chamber testing to certify Special Emphasis Level I integrity. Key deliverables include the provision of certified test reports and formal compliance certifications. To be eligible, the contractor must hold ISO/IEC 17025 and ISO 10012 accreditations and maintain a Confidential security clearance. The opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Non-Destructive Testing (NDT) ServicesThis subcontract for Non-Destructive Testing (NDT) Services involves providing specialized hull and structural inspections for prime contractors working on USCG vessel projects. The scope of work focuses on conducting ultrasonic thickness measurements and side-scan ultrasonic testing of hull plating to ensure structural integrity. The selected provider will be responsible for delivering comprehensive thickness measurement data and detailed inspection reports. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work is designated for performance in Santa Barbara, California. The opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

POSTED

about 4 hours ago

DEADLINE

PRICE TERM AGREEMENT TO PROVIDE HYDROSTATIC TESTING OF MSA SCBA TANKS FOR THE HAWAII FIRE DEPARTMENT, COUNTY OF HAWAII

Solicitation # 27-0069

The County of Hawai'i, through the Hawaii Fire Department, is soliciting quotations for a Price Term Agreement to provide hydrostatic testing for 200 MSA SCBA tanks. This agreement consists of an initial one-year term ending October 31, 2027, with the possibility of four additional one-year option years at the County's discretion. All work must strictly adhere to NFPA 1852, NFPA 1850, DOT CFR 49 Part 180, OSHA 29 CFR 1910.134, CGA standards C-1, C-5, C-6, and C-8, as well as MSA G1 manufacturer specifications. The Hawaii Fire Department is responsible for the delivery and pickup of all cylinders, while the vendor must perform pre-inspection verification of markings and serial numbers, apply required hydrostatic test labels or stamps, and clearly mark any unserviceable cylinders. The contract is awarded to the lowest responsive and responsible offeror for IFB solicitations or based on best value for RFP solicitations, considering factors such as price, total cost of ownership, and technical performance. All quotations must be F.O.B. Destination, freight prepaid and allowed. Payments are processed by the County of Hawai'i Purchasing Division within 30 days of receipt of a statement for completed services, with a tax clearance requirement for contracts exceeding 25,000 dollars. Vendors must comply with state and federal laws regarding non-discrimination and campaign contributions, and must not be debarred by the State of Hawai'i or the U.S. Federal government. Submissions are handled through the OpenGov Procurement Portal, and prices must remain valid for 60 days following the submission deadline.

Hawaii Fire Department

POSTED

about 14 hours ago

DEADLINE

Structural Steel and Welding Special InspectionThis subcontract involves providing specialized structural steel and welding inspections for prime contractors working on senior housing projects managed by the Mayor's Office of Housing and Community Development in San Francisco. The scope of work includes inspecting metal stair installations and conducting structural steel fabrication inspections at shops located in Benicia, California, with a specific focus on embeds and welding. To qualify for this role, the provider must hold Certified Welding Inspector credentials. Key deliverables for the contract include the submission of detailed welding inspection reports and formal fabrication approvals. The solicitation was posted on October 21, 2026, with a response deadline of November 21, 2026.

Mayor's Office of Housing and Community Development

POSTED

about 17 hours ago

DEADLINE

Construction Materials Testing Laboratory ServicesThis subcontract opportunity is for Construction Materials Testing Laboratory Services to support prime contractors on senior housing projects managed by the Mayor's Office of Housing and Community Development in San Francisco. The selected provider will be responsible for performing critical material sampling and analysis, specifically focusing on grout testing and concrete cylinder breaks. Qualified candidates must operate an accredited testing laboratory with the capacity to manage the high volumes associated with high-rise residential construction. The primary deliverable for this engagement is the provision of certified laboratory test reports. Interested parties should note the response deadline of November 21, 2026.

Mayor's Office of Housing and Community Development

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Manufacture or Refurbishment of Pump Cylinders (NIIN 012294986)This subcontract involves the manufacture or refurbishment of nine pump cylinders (NIIN 012294986) for prime contractors supporting U.S. Navy projects under the Department of Defense. The selected provider must utilize precision machining equipment to fabricate or restore the cylinders in strict accordance with CAGE Drawing specifications and TDP Version 021. Administrative requirements include the submission of all necessary data and waiver requests through the Electronic Contractor Data Submission system. Additionally, the contractor must ensure full compliance with the Trade Agreements Act and the Buy American-Balance of Payments Program to successfully deliver the completed and inspected units.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 4 hours ago

DEADLINE

Valve Assembly Replacement Parts SupplierThis subcontract, managed by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the supply of replacement parts, seals, and hardware for the Disk Assembly Valve, NSN 4820-01-068-1410. The supplier is responsible for providing OEM or approved equivalent components, gaskets, and fasteners to prime contractors working on Department of the Navy projects. All materials must be delivered directly to the designated repair facility. To ensure quality and regulatory compliance, the supplier must provide certificates of conformance and country of origin certifications. Additionally, all deliverables must adhere to the Trade Agreements Act per FAR 52.225. The opportunity was posted on October 22, 2026, with a response deadline of December 16, 2026, falling under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

in about 2 months

Valve Disk Assembly Repair and ModificationThis subcontract, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, requires the teardown, evaluation, and repair or modification of a specific valve disk assembly with NIIN 010681410. The selected contractor will be responsible for disassembling the unit to assess wear and performing necessary repairs in strict accordance with technical orders, manufacturing operations, and approved Department of Defense quality requirements. The process involves the use of precision measurement tools and specialized tooling to ensure the component meets all operational standards. The primary objective of the contract is the delivery of one fully repaired and certified valve disk assembly for use by prime contractors on Department of the Navy projects. This effort falls under NAICS code 811210. Interested parties must submit their responses by the deadline of December 16, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

in about 2 months

Supply of Original Equipment Manufacturer (OEM) Valve PartsThis subcontract involves the supply of Original Equipment Manufacturer (OEM) valve parts, including replacement parts, seals, gaskets, and internal components, for prime contractors working on NAVSUP Weapon Systems Support Mech projects. The selected provider must be an authorized distributor of the original manufacturer to ensure all components meet original manufacturer specifications and drawings. Deliverables include certified OEM replacement parts and required Material Safety Data Sheets (MSDS) that comply with OSHA/FED STD 313 standards for hazardous materials. This opportunity falls under NAICS code 423830 and is associated with the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Specialized Repair and Overhaul of Globe ValvesThis subcontract involves the specialized technical repair and overhaul of Globe Valves for prime contractors supporting NAVSUP Weapon Systems Support Mech projects under the Department of Defense. The selected provider must be an authorized manufacturer service provider capable of executing all work according to original manufacturer specifications, drawings, and technical orders. Key requirements include the ability to perform comprehensive inspection and testing, as well as ensuring all physical marking adheres to MIL-STD-130, REV N. The contractor is responsible for providing all necessary tooling for disassembly, machining, and pressure testing to deliver fully repaired and certified valves. This opportunity falls under NAICS code 811210, with a response deadline set for November 6, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

Military-Grade Packaging and Hazardous Materials ShippingThis subcontract for Military-Grade Packaging and Hazardous Materials Shipping supports prime contractors on US Navy projects under the Department of Defense. The scope of work involves providing specialized packaging and packing services, specifically executing Level A and Level B packing according to MIL-STD-2073 for both CONUS and OCONUS transport. The contractor is responsible for delivering fully packed and marked shipping containers that are ready for transport, utilizing MIL-STD-2073-1 Appendix C containers. Compliance with strict military and federal standards is mandatory, including marking containers per MIL-STD-129 and managing hazardous materials in accordance with 49 CFR and Performance Oriented Packaging standards. This opportunity is categorized under NAICS code 488490 and was posted by the Navsup Weapon Systems Support Mech. The response deadline for this requirement is November 13, 2026.

Other Support Activities for Road Transportation

POSTED

about 4 hours ago

DEADLINE

Depot Level Repair of Assemblies (Ref No. 5544274)This subcontract, managed by the Department of Defense under the Navsup Weapon Systems Support Mech agency, involves performing depot-level repairs on assemblies for prime contractors supporting US Navy projects. The primary objective is to restore items to A Condition Stock by executing technical repairs that meet the functional requirements for CAGE Code 53711 and Reference No. 5544274. The scope of work includes utilizing specialized testing equipment to verify condition status and ensuring all repaired items are marked according to MIL-STD-130, REV N, with the application of DLR labels. This project falls under NAICS code 811219, with a response deadline set for November 13, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

Diesel Engine Replacement Parts and ComponentsThis subcontract involves the procurement of internal components, seals, gaskets, and modified parts for diesel engine NIIN 016779537 to support prime contractors on US Navy NAVSUP projects. The scope of work includes sourcing either commercial off-the-shelf or custom-manufactured OEM equivalent components, which are to be delivered as individual parts or kits to the designated repair facility. Managed by the Department of Defense under the Navsup Weapon Systems Support Mech agency, the contract falls under NAICS code 332991. A critical requirement for the provider is strict adherence to the Buy American Act 252.225-7001, which necessitates thorough domestic content verification for all supplied materials.

Ball and Roller Bearing Manufacturing

POSTED

about 4 hours ago

DEADLINE

Diesel Engine Teardown and Repair ServicesThis subcontract involves providing specialized teardown, evaluation, and repair services for diesel engine NIIN 016779537 in support of US Navy NAVSUP projects. The scope of work includes disassembling engines to identify wear, performing necessary mechanical repairs or modifications, and ensuring all units are packaged according to MIL-STD-2073. The final deliverable is a fully repaired and certified diesel engine. To execute this contract, the provider must utilize precision engine machining tools and adhere strictly to NAVSUP 1397-1 labeling standards. Additionally, the contractor is required to provide CMMC UIDs via SPRS. This opportunity is managed under NAICS code 811310 for the Department of Defense, specifically the Navsup Weapon Systems Support Mech.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

Supply of Raw Materials/Components for Linear Direct ValvesThis subcontract, managed by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the supply of raw materials, castings, and specialized internal components for U.S. Navy linear direct valve projects. The scope of work requires the sourcing of high-grade alloys and precision-cast valve bodies that strictly adhere to the metallurgical and dimensional specifications outlined in TDP Version 005. To ensure quality and regulatory compliance, the provider must furnish Mill Test Reports for material certification and meet all FAR 25.105 Domestic End Product requirements. The contract focuses on the delivery of certified raw materials and sub-components, with a response deadline set for November 20, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 4 hours ago

DEADLINE

Manufacture or Refurbishment of Linear Direct ValvesThis subcontract involves the manufacture or refurbishment of Linear Direct Valves (NIIN 014241201) for prime contractors supporting U.S. Navy projects. Managed by the Department of Defense under Navsup Weapon Systems Support Mech, the work requires the fabrication or restoration of valve bodies and internals using precision machining equipment. All deliverables must be produced in strict accordance with Technical Data Package Version 005 and Navy quality requirements, with final packaging adhering to MIL-STD-2073. The opportunity is categorized under NAICS code 332911 and was posted on October 22, 2026, with a response deadline of November 20, 2026. The scope of work ensures that all completed valves are fully tested and meet the rigorous specifications necessary for naval application.

Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

Certified Metal Material SupplyThis subcontract, titled Certified Metal Material Supply, involves the procurement and delivery of certified raw metals and alloys to support prime contractors working on Department of the Navy projects. The selected provider is responsible for sourcing domestic metal stock and delivering it directly to the fabricator, ensuring all materials are accompanied by full material certifications and Mill Test Reports to verify both origin and grade. Managed under the Department of Defense through the Navsup Weapon Systems Support Mech, the contract strictly requires compliance with the Buy American Act for all domestic end products. The opportunity is categorized under NAICS code 331210, with a response deadline set for December 23, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS