Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Marking, Labeling, and Barcoding

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires the application of military-compliant marking and labeling standards per MIL-STD-129, including the use of Data Matrix or Code 128 barcodes and bare format labeling, with all government identifiers removed prior to delivery. The work must ensure full adherence to DoD requirements for identification and traceability while eliminating any markings that reference government ownership or sourcing. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 561910 for other support activities. The opportunity was posted on July 22, 2026, with a response deadline of August 6, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Performance location and specific delivery details are not specified in the provided data, but compliance with the marking and labeling standards is mandatory for award consideration.

General Info

Apply MIL-STD-129 labeling with barcodes, remove government identifiers, small business only, deadline August 6, 2026.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

561910 - Packaging and Labeling ServicesView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply MIL-STD-129 compliant markings, including Data Matrix or Code 128 barcodes, 'bare' format labeling, and removal of government identifiers prior to delivery.

Similar Contracts

Same NAICS industry code

Military Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, and marking services strictly in compliance with MIL-STD-129 and FED-STD-313 standards for the shipment of materials to the Defense Logistics Agency. All work must be executed to ensure military-grade integrity, durability, and traceability throughout the supply chain, with adherence to detailed labeling, containment, and environmental protection protocols. The services are critical for the safe and compliant handling of defense-related cargo destined for federal distribution. This is a subcontract opportunity under NAICS code 561910, posted by the Department of Defense through the San Diego office, with performance location specified as 92136-3581 in San Diego. The solicitation closed on August 3, 2026, and interested parties were required to submit responses by that deadline. The contract is not subject to any set-aside designation, and all bidders must be prepared to meet stringent federal defense logistics requirements without deviation. Further details and submission context are accessible via the official DIBBS portal link provided.

POSTED

about 16 hours ago

DEADLINE

Packaging and Marking Compliance ServicesThe contract seeks providers to deliver packaging, labeling, and marking services aligned with military standards for government shipments, ensuring all materials meet stringent defense logistics requirements. Services must comply with applicable regulations to support the safe, secure, and traceable transport of defense-related supplies across global operational environments, with performance anticipated to be conducted in coordination with Department of Defense logistics networks. The solicitation is classified as a subcontract under NAICS code 561910, indicating the work falls within other support activities for transportation, and is open to qualified subcontractors responsive to the needs of the Land Supply Chain organization. Bidders must submit proposals by the deadline of August 3, 2026, with the solicitation issued on July 22, 2026, through the DIBBS platform. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors regardless of size or certification status. The place of performance and direct point of contact information are not provided in the posting, suggesting logistical coordination will be handled through established government channels or upon contract award. Interested parties must review the full solicitation via the provided DIBBS link to access detailed technical specifications, compliance documentation, and submission instructions required for qualification.

LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Packaging, Marking, and Shipping ServicesThe contract requires the provision of comprehensive packaging, marking, and shipping services for nonmetallic hose designated for delivery to a naval vessel in San Diego, with strict adherence to MIL-STD-129 for labeling and MIL-STD-2073-1E for preservation standards to ensure long-term integrity and readiness. All materials must be traceable throughout the freight delivery process, ensuring full accountability from origin to final destination on the vessel. The work must be completed under the specifications of a subcontract agreement, with the North American Industry Classification System code 561910 indicating specialized support activities for transportation. The contract is managed by the Fluid Handling Division of the Department of Defense and is targeted for performance at the San Diego location with a zip code of 92113-3650. Responses are due by August 3, 2026, and the opportunity was posted on July 22, 2026, through the DIBBS platform.

FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires the packaging and labeling of soldering and desoldering tips in strict compliance with federal hazardous materials communication regulations, including OSHA HAZCOM, GHS, DLA RP001, and DFARS 252.223-7001. All labeling must adhere to standardized hazard communication protocols to ensure proper identification of chemical risks associated with the products, with packaging designed to maintain integrity and regulatory alignment throughout transit and storage. The work must be executed with precision to meet Department of Defense standards for safety, documentation, and traceability of hazardous substances used in or present on these tips. The solicitation is issued under NAICS code 561910 for other support activities and is classified as a subcontract opportunity with a response deadline of August 3, 2026. Performance is to be conducted at the DLA New Cumberland Facility, identified by zip code 17070-5002. The contracting entity is the Department of Defense through the DDSP New Cumberland Facility, and all deliverables must fully align with DLA and federal regulatory requirements to ensure compliance across the defense supply chain. Participation requires demonstrated expertise in hazardous materials handling and labeling, with an emphasis on consistency, accuracy, and adherence to mandated documentation procedures.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

Military-Compliant Packaging and PalletizationThe contract requires the provision of packaging and palletization services that strictly adhere to military standards including MIL-STD-129, ASTM D3951, and DLA RP001, ensuring compliance with federal defense logistics requirements. All work must include proper barcoding and unit identification to meet traceability and inventory management protocols for Department of Defense shipments. The services are to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is classified as a subcontract under NAICS code 561910, indicating it falls within the Other Support Activities category. Responses must be submitted by August 3, 2026, and the solicitation was posted on July 22, 2026, through the DIBBS system. There is no set-aside designation specified, and no point of contact is listed, but all details and submissions are accessible via the provided DIBBS link.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires full compliance with regulations for the packaging, labeling, and documentation of hazardous materials, including the preparation of Safety Data Sheets and the application of accurate hazard warning labels to ensure regulatory adherence throughout handling and transport. All activities must meet established federal standards for hazardous material management, with a focus on accuracy, consistency, and safety in every phase of the process. This is a subcontract under the NAICS code 561910, issued by the Department of Defense through its CONSTRUCTION & EQUIPMENT T & IFO EQ division, with performance located at NEW CUMBERLAND, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, with no set-aside classification specified. Interested parties must submit proposals through the official DIBBS platform prior to the deadline to be considered for award.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 16 hours ago

DEADLINE

Specialized Packaging and Preservation ServicesThe contract requires specialized packaging, preservation, and unitization of solenoid assemblies in full compliance with military standards, utilizing dry-air methods and desiccants to ensure protection against moisture and environmental degradation. All items must be packaged using D3/DO container types, which are rigorously defined for military applications to maintain integrity during storage and transit. The work demands strict adherence to established protocols that safeguard the functionality and longevity of sensitive components under demanding operational conditions. This subcontract is issued under NAICS code 561910 for other support activities for warehousing and storage and is managed by the Department of Defense through the Maritime Supply Chain organization. The solicitation was posted on July 22, 2026, with a response deadline of August 6, 2026. Although the place of performance and point of contact details are unspecified, the requirement is tied to defense logistics and expects full compliance with military packaging specifications without deviation. Bidders must demonstrate capability in handling precision military hardware with documented experience in protective packaging techniques and container compliance.

MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Military Shipment Marking and Barcoding ServicesThe contract requires the application of MIL-STD-129 compliant markings and barcodes to unit and shipping containers, ensuring all critical supply chain data such as National Stock Number, quantity, nomenclature, and handling codes are accurately and permanently displayed. This work must adhere strictly to Department of Defense standards for traceability, durability, and readability in military logistics environments. The contract is structured as a subcontract under NAICS code 561910, indicating it pertains to other support activities for transportation, and is issued by the Electrical Devices Division of the Department of Defense. The solicitation is open for responses until August 3, 2026, with the posting date listed as July 22, 2026, indicating a relatively short window for proposal submission. The place of performance and contact details are not specified, suggesting the work may be distributed across multiple locations or requires flexibility in execution. All marking and barcoding must be performed in a manner that supports seamless integration into existing military logistics and inventory systems, with an emphasis on precision and compliance to avoid delivery rejections or logistical delays.

ELECTRICAL DEVICES DIV

POSTED

about 16 hours ago

DEADLINE

MIL-STD-129 Marking and Barcoding ServicesThe contract requires the application of standardized markings and GS1/USS-128 barcodes to shipments in full compliance with MIL-STD-129 to enable accurate and automated logistics tracking across military supply chains. This subcontract is specifically focused on ensuring all packaging and shipping units are properly labeled with legible, machine-readable barcodes that meet Department of Defense standards for inventory control, receipt, and distribution. The work must be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000, and all labeling must be executed to guarantee seamless integration into Defense Logistics Agency systems. The solicitation was posted on July 22, 2026, with a firm response deadline of August 3, 2026, targeting contractors capable of executing precise, high-volume marking operations under strict military specifications. The North American Industry Classification System code 561910 identifies this as a support service for transportation and logistics, indicating the work involves specialized handling and labeling rather than manufacturing. This subcontract falls under the Department of Defense’s DLA San Joaquin office, emphasizing its role in supporting defense logistics infrastructure, though no set-aside provisions or organizational type restrictions are specified. Interested parties must respond through the DIBBS platform via the provided UI link to participate.

DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires strict adherence to hazardous materials packaging and labeling standards for any dome light containing hazardous components, mandating compliance with IP025, MIL-STD-313, and 29 CFR 1910.1200 to ensure safe handling, transport, and storage. These regulations govern the proper identification, containment, and documentation of hazardous substances to protect workers, the environment, and end-users, with noncompliance potentially resulting in rejection or penalties. The requirement is part of a subcontract under the NAICS code 561910, issued by the Department of Defense through DLA DIST SAN JOAQUIN, with performance expected in Tracy, California, 95304-5000. The solicitation was posted on July 22, 2026, and responses must be submitted by August 3, 2026, indicating a compressed timeline for compliance verification and documentation preparation. The contract does not specify a set-aside type or point of contact, and interested parties must follow the provided DIBBS link for detailed submission instructions and technical requirements. All submitted materials must clearly demonstrate adherence to the listed hazardous materials standards without exception.

DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

Defense-Compliant Packaging and Preservation ServicesThe contract seeks providers to deliver packaging and preservation services for non-hazardous materials in strict compliance with DLA RP001 and ASTM D3951 standards, ensuring all materials are properly palletized and protected for military logistics and storage. This subcontract requires adherence to federally mandated packaging protocols that guarantee durability, environmental resistance, and traceability throughout the supply chain, with performance specifically tied to the designated location in Tracy, California, under the 95304-5000 zip code. The work must align with the NAICS code 561910, reflecting specialized support services for transportation and logistics operations under the Department of Defense's DLA San Joaquin office. Responses are due by August 3, 2026, following the posting date of July 22, 2026, with no set-aside type specified and no solicitation number provided. Interested parties must meet all technical and procedural requirements outlined in the referenced standards and be prepared to manage end-to-end packaging processes, including preservation techniques suitable for extended storage and transit conditions. While no point of contact is listed, the DIBBS platform hosting the solicitation serves as the official channel for access and submission.

DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

Packaging, Marking, and Preservation ServicesThe contract requires the provision of packaging, marking, and preservation services adhering strictly to MIL-STD-129 standards to ensure all military items are properly prepared for shipment and long-term storage. This includes compliant labeling, protective wrapping, corrosion inhibition, and secure containment procedures designed to maintain equipment integrity under diverse environmental conditions during transport and in garrison. The work must support the Department of Defense’s logistical readiness requirements with an emphasis on traceability, durability, and adherence to federal military specifications. This is a total small business set-aside solicitation under NAICS code 561910, meaning only small businesses certified by the SBA are eligible to compete. The opportunity is classified as a subcontract and is managed by the DDSP New Cumberland Facility under the Department of Defense. Responses are due by August 3, 2026, with performance centered at the New Cumberland location, ZIP 17070-5002. All contractors must be fully equipped to meet stringent military packaging protocols and demonstrate the capacity to deliver consistent, high-quality preservation services that align with national defense logistics standards.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

Cybersecurity Compliance and CUI SafeguardingThe contract requires full implementation of NIST SP 800-171 controls to protect covered defense information and ensure compliance with federal cybersecurity standards. Performance includes conducting thorough self-assessments to verify adherence to these controls and meeting all DFARS requirements for reporting cyber incidents in a timely and accurate manner. The work is scoped under a Small Business Set-Aside, specifically designated for total small business participation, and aligns with NAICS code 541512 for computer systems design services. The contract is structured as a subcontract under the Department of Defense’s Strategic Acquisition Program Directorate, with responses due by August 6, 2026, and a posted date of July 22, 2026. Place of performance and specific office details are not provided, but work is expected to be conducted in support of defense-related cybersecurity obligations.

Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires comprehensive cleaning, drying, packaging, and palletization services strictly aligned with MIL-STD-2073-1E and DLA RP001 standards, ensuring all military-grade items are preserved and packaged to federal specifications. Preservation method 33 must be utilized for long-term protection against corrosion and environmental degradation, with container type E5 mandated for secure, standardized storage and transport. All work must adhere to rigorous quality control protocols to maintain readiness and compatibility with military logistics systems. The scope demands full compliance with defense packaging requirements, leaving no room for deviation in material selection, process execution, or documentation. This is a small business set-aside subcontract under the SBA program, reserved exclusively for small businesses as defined by the Federal Acquisition Regulation. The NAICS code 561910 indicates the services fall under other support activities for air transportation and related logistics support, positioning the contract within specialized military logistics services. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. The place of performance and point of contact details are not specified, but the contract must be executed in alignment with DoD operational requirements, and interested parties must access the full details through the provided DIBBS portal link.

Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

Precision Mechanical Component ManufacturingThe contract calls for the manufacture and supply of a gear and shaft assembly identified by NSN 3020017029235, adhering strictly to military specifications throughout all phases including precision machining, component assembly, rigorous quality control, and secure packaging. All work must comply with defense industry standards to ensure reliability and performance under operational conditions, with each unit subjected to thorough inspection and documentation to validate conformance. The effort is scoped as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and falls under NAICS code 332996 for other fabricated metal product manufacturing. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. The performance location and point of contact details are not specified, but all deliverables must be ready for military logistics handling and final distribution as required.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

Loop Clamp (NSN 5340-01-112-7793) Supply and DeliveryThe contract requires the manufacture, packaging, labeling, and delivery of 208 units of Loop Clamp designated by NSN 5340-01-112-7793 to various locations within the United States, with work to be performed in response to specific delivery orders. All aspects of production and logistics must adhere to military packaging and marking specifications, as well as mandatory cybersecurity standards to ensure the integrity and security of the supplied items. The requirement is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside program, in accordance with FAR 19.5, and is classified under NAICS code 332510 for Fabricated Metal Product Manufacturing. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and is issued through the Department of Defense’s Strategic Acquisition Program Directorate. The performance location spans multiple U.S. destinations as dictated by delivery orders, and the contracting activity is managed via the DIBBS platform under reference number SPE7LX26U8925.

Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

Surge and Sustainment (S&S) Production Planning and ValidationThe contract is for the development and ongoing maintenance of the Capability Assessment Plan, focusing on surge and sustainment (S&S) production planning and validation. Key responsibilities include conducting surge modeling to assess responsiveness under high-demand scenarios, developing an asset refresh strategy to ensure long-term operational readiness, and defining a comprehensive exit strategy that outlines transition and disposition of capabilities. The work also requires third-party validation of the S&S capability to ensure objectivity and compliance with established performance standards. This effort supports the Department of Defense’s Strategic Acquisition Program Directorate in maintaining a resilient, adaptable, and validated sustainment infrastructure. This is a small business set-aside subcontract, classified under NAICS code 541690, which pertains to other scientific and technical consulting services. The solicitation was posted on July 22, 2026, with a response deadline of August 21, 2026. The performance location is not specified, and no point of contact is listed. The contract will be managed through the DIBBS platform under solicitation number SPE7LX26RX038, and all work must align with the requirements of the Federal Acquisition Regulation for total small business set-asides. The focus is on delivering analytical rigor and validated outcomes to inform future sustainment and surge planning across defense operations.

Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

Cybersecurity and CMMC Compliance SupportThe contract seeks cybersecurity services to ensure full compliance with NIST SP 800-171 and CMMC Level 2 standards for the protection of covered defense information, requiring the contractor to conduct comprehensive system assessments and prepare the organization for audit readiness. The work involves evaluating existing security controls, identifying gaps, implementing necessary improvements, and documenting processes to meet federal cybersecurity requirements applicable to defense contractors handling sensitive information. This effort is critical to maintaining operational eligibility within the defense supply chain and ensuring continued access to Department of Defense contracts. This is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses can compete, with the NAICS code 541512 indicating it falls under Computer Systems Design Services. The solicitation was posted on July 22, 2026, with responses due by August 21, 2026, and is issued under the Strategic Acquisition Program Directorate within the Department of Defense. All performance work will align with federal guidelines for cybersecurity posture, with emphasis on documentation, continuous monitoring, and achieving verifiable compliance status to support the defense industrial base’s secure operations.

Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

Domestic and International Shipping / Freight LogisticsThe contract involves the transportation of finished seals using approved carriers, with specific requirements for ocean freight to be conducted via U.S.-flag vessels when mandated by regulation. Delivery must be completed within 137 days after the date of order, ensuring timely fulfillment of logistical obligations. The shipment services cover both domestic and international routes, with compliance to federal transportation and security standards embedded in the execution of duties. This is a small business set-aside subcontract under NAICS code 484220, specifically designated for total small business participation as defined by the SBA. It is issued by the Strategic Acquisition Program Directorate under the Department of Defense and was posted on July 22, 2026, with responses due by August 21, 2026. The contract is accessible through the DIBBS system and requires adherence to all applicable federal acquisition regulations governing freight logistics for defense-related end items.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

Specialized Packaging and Marking ServicesThe contract requires specialized packaging and labeling services for nonmetallic seals in compliance with MIL-DTL-117 and MIL-STD-2073-1E standards, ensuring the materials are protected with UV-resistant, waterproof, and greaseproof bagging. The seals must also be talc coated according to A-A-59303 to prevent sticking and maintain integrity during storage and transport, while adhering to MIL-STD-129 for precise marking and identification. All handling, packaging, and labeling must meet rigorous military specifications to guarantee readiness and traceability throughout the defense supply chain. This is a small business set-aside subcontract under NAICS code 323111, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The opportunity is open for bids through August 21, 2026, with no solicitation number provided, and performance location details are unspecified. The procurement reflects a focused effort to support small businesses in providing critical packaging solutions for defense components requiring high durability and standardized marking protocols under challenging environmental conditions.

Commercial Printing (except Screen and Books)

POSTED

about 16 hours ago

DEADLINE

Nonmetallic Strip Seal Manufacturing and SupplyThe contract solicits full-cycle manufacturing, packaging, and delivery of nonmetallic strip seals designated by NSN 5330-01-209-5997, ensuring strict compliance with applicable military specifications and the ability to scale production rapidly to meet surge and sustainment demands. The work involves end-to-end production processes from raw material procurement through final packaging and shipment, with performance requirements centered on quality, reliability, and timely fulfillment under variable operational conditions. The acquisition is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and falls under NAICS code 339991 for other miscellaneous manufacturing. The opportunity is managed by the Strategic Acquisition Program Directorate within the Department of Defense, with a response deadline of August 21, 2026, and an initial posting date of July 22, 2026. Performance locations and specific delivery endpoints are not detailed in the available data, and point of contact information is not provided.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

PLUG, PROTECTIVE, DUSThe item is a protective plug designated as DUS with NSN 5340-01-661-2051, procured in a single unit under purchase request 1000237704, with delivery expected 146 days after order. The technical data associated with this item is subject to federal export control regulations under either ITAR or EAR, meaning any disclosure or transfer to foreign persons—regardless of location—is strictly prohibited without prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by the DLA controlling authority. The procurement is conducted under solicitation SPE7LX-26-U-8929, issued as a Total Small Business Set-Aside under NAICS code 332722, with responses due by August 6, 2026. The solicitation was posted on July 22, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek designated as the primary point of contact.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

YOKE, UNIVERSAL JOINThe contract pertains to the procurement of 113 units of a yoke universal joint with NSN 2520-01-067-3890 under solicitation SPE7LX-26-U-8927, issued as a total small business set-aside under NAICS code 336350. Delivery is required within 167 days after award, with responses due by August 6, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item contains components subject to Qualified Products Lists or Qualified Manufacturers Lists, mandating compliance with specified qualification standards. Strict prohibitions against Class I ozone-depleting chemicals apply, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The contract imposes stringent cybersecurity and export control obligations. Suppliers must hold CMMC Level 2 certification through an accredited third-party assessment organization and comply with the Defense Federal Acquisition Regulation Supplement’s ITAR and EAR controls regarding technical data, which cannot be disclosed to foreign persons without prior authorization from the Department of State or Commerce. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of required DLA export control training, and formal approval by the DLA authority. Additionally, packaging must meet DLA standards, non-accepted supplies must have government identification removed, and inspection and acceptance may occur at the manufacturer’s facility. All requirements are binding and supersede any conflicting specifications unless otherwise noted.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

GUARD, SPLASH, VEHICULARThe solicitation SPE7LX-26-U-8930 is for 82 units of the Guard, Splash, Vehicular (NSN 2540-01-115-2397) under a Total Small Business Set-Aside, with a one-year ordering period and a maximum contract value of $350,000. The contract is structured as an Indefinite-Delivery, Indefinite-Quantity (IDIQ) instrument, with delivery orders issued as required, guaranteed minimums of 12 units, and a minimum order quantity of 41 units. All items must be packaged, preserved, and marked strictly in accordance with MIL-STD-2073-1E and MIL-STD-129, using clean and dry preservation methods without chemical protective materials, and conforming to DLA-specific packaging requirements (RP001). Physical marking of bare items (RQ017), standardized barcoding using USSC-128 or Data Matrix, and hazard labeling per 29 CFR 1910.1200 and IP025 are mandatory, with acceptance occurring at the destination under government inspection. Technical data associated with this item is subject to U.S. export control regulations under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048; access to such data is restricted to contractors who have completed DLA’s export-controlled data training, submitted the required questionnaire, hold valid US/Canada Joint Certification Program credentials, and possess DLA approval. The contract mandates adherence to multiple federal and defense-specific clauses covering cybersecurity (252.204-7012), trafficking in persons, employment eligibility, sustainable products, hazardous material handling, and prohibition of covered defense telecommunications equipment. Contractors must submit proposals electronically via DIBBS by August 6, 2026, and all payments must be processed through Wide Area WorkFlow, with no alternative invoicing systems permitted. Offerors must certify small business status, disclose UEI and CAGE codes if providing covered telecommunications items, and conform to all socioeconomic and compliance requirements tied to the NAICS code 336390. The Defense Logistics Agency retains control over technical data distribution and compliance enforcement through its Strategic Acquisition Program Directorate.

Other Motor Vehicle Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE