Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military-Compliant Packaging and Labeling Services

Active

Federal

Response Deadline08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of defense-grade packaging, labeling, and marking services compliant with MIL-STD-2073-1E and MIL-STD-129 standards for U.S. Department of Defense shipments. All packages must adhere to specified military requirements including the use of ICCB-128 or Data Matrix barcodes for accurate tracking and the application of DLA RP001 palletization guidelines to ensure uniformity and operational readiness during transport and handling. The services must support the entire lifecycle of defense cargo from initial packaging through final delivery, with strict attention to durability, identification, and traceability under military logistics protocols. This subcontract is issued under NAICS code 423820 by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with performance required at the FPO address ending in 96607. The opportunity was posted on August 3, 2026, and responses are due by August 11, 2026. No set-aside designation is specified, and the procurement is open to qualified subcontractors capable of meeting the stringent defense logistics standards. Bidders must demonstrate proven experience with military packaging systems and the ability to comply with real-time tracking and documentation requirements mandated by DLA and DoD regulations.

General Info

Provide defense-grade packaging and labeling per MIL-STD-2073-1E and MIL-STD-129 with DLA palletization and barcoding for FPO 96607.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

423820 - Farm and Garden Machinery and Equipment Merchant WholesalersView NAICS

Place of Performance

FPO, AP, 96607, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide DoD-compliant packaging, labeling, and marking for defense shipments using MIL-STD-2073-1E and MIL-STD-129 standards, including ICCB-128 or Data Matrix barcodes and DLA RP001 palletization rules.

Similar Contracts

Same NAICS industry code

27CRDWBCLULL-0020G - Tree Shear

Solicitation # DASIowa-27CRDWBCLULL-0020G

The Iowa Department of Natural Resources is soliciting proposals for the purchase of a Maxx Attachments Timberwolf 16” Tree Shear with Grapple and chemical sprayer, or a State of Iowa approved equivalent, to support forestry and land management operations. The specified equipment must meet or exceed the outlined performance standards, and vendors may submit alternatives provided they include detailed technical specifications demonstrating full compliance or superior capability. Any deviations from the stated requirements must be clearly noted and will be subject to DNR approval. Only authorized manufacturer representatives are eligible to respond, and they must be able to extend the manufacturer’s warranties. Bidders are required to review contract terms and conditions posted on the Iowa DNR website and ensure all submissions are properly certified and resubmitted if reopened after initial filing, even if no changes are made. The solicitation, numbered DASIowa-27CRDWBCLULL-0020G, was posted on August 4, 2026, with a response deadline of August 20, 2026. Respondents must use the designated online portal to submit proposals and are advised to frequently save progress, particularly after uploading documents. If amendments are issued, bidders must read and acknowledge them and then re-certify and resubmit their proposals to remain eligible. All communications and submissions must be processed through the official platform, and the primary point of contact for inquiries is Colton Lullmann. The equipment will be used statewide, and there are no set-asides specified for small businesses or other categories. The DNR retains full discretion in evaluating compliance, accepting deviations, and awarding the contract based on the submitted proposals.

POSTED

about 20 hours ago

DEADLINE

Supply of Tray Delivery Carts for TDCJ Correctional FacilitiesThe Texas Department of Criminal Justice is seeking commercial-grade tray delivery carts for use across its correctional facilities throughout Texas, targeting the procurement of durable, efficient, and sanitation-compliant carts designed specifically for food service operations. The contract is structured as a subcontract under NAICS code 423820, indicating a focus on wholesale trade of miscellaneous durable goods, and is open for responses until August 19, 2026, with the solicitation posted on August 4, 2026. The carts must meet rigorous operational standards to support daily meal distribution in high-volume, secure institutional environments, ensuring reliability, ease of maneuverability, and resistance to wear, abuse, and contamination. Delivery is expected to serve multiple TDCJ facilities statewide, requiring the vendor to accommodate logistics, staging, and potential installation needs in a corrections setting where security and compliance are paramount. The equipment must align with food safety protocols and be suited for heavy daily use, potentially including features such as stainless steel construction, seamless surfaces, locked wheels, and corrosion resistance. While specific technical specifications are not detailed in the provided data, the nature of the procurement implies strict adherence to industry standards for institutional foodservice equipment. Interested parties must submit proposals through the Texas SmartBuy portal, and all deliveries must fulfill the operational and logistical requirements dictated by the Texas Department of Criminal Justice's internal standards.

Texas Department of Criminal Justice

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of waterproof, greaseproof, and opaque packaging and labeling services compliant with MIL-STD-129 and MIL-DTL-117 specifications for military shipments. All packaging must meet stringent military standards for durability and protection under harsh conditions, and labeling must include a 2D Data Matrix barcode to ensure accurate tracking and inventory management throughout the supply chain. The work is to be performed at a location in Albany, Georgia, with a zip code of 31704-1128, and the contract is classified as a subcontract under NAICS code 423820, which pertains to wholesale trade of motor vehicle supplies and parts. The solicitation was posted on August 3, 2026, and responses are due by August 10, 2026, with the overseeing agency being the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT organization.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Packaging, Labeling, and Palletization ServicesThe contract requires comprehensive packaging, labeling, and palletization services adhering strictly to MIL-STD-129, ASTM D3951, and DLA RP001 standards, ensuring all items are prepared for military logistics and distribution. This includes accurate barcode and UID marking, as well as proper hazardous material labeling when applicable, to meet federal and defense-specific regulatory requirements. The work must be executed with precision to support the Department of Defense’s supply chain reliability and traceability objectives. Issued under NAICS code 423820 as a subcontract by the Strategic Acquisition Program Directorate, the opportunity is open for response until August 18, 2026, with the solicitation posted on August 3, 2026. All performance is expected to comply with the stringent protocols set by DLA and the Department of Defense, though the specific place of performance and point of contact details are not provided. Interested parties must access the full solicitation through the official DIBBS portal to ensure full understanding of requirements and submission procedures.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of MIL-STD-129 compliant packaging, labeling, barcoding, and palletization services for military-grade steering knuckles, ensuring strict adherence to Department of Defense standards for traceability, durability, and uniformity in logistics handling. All packaging must meet the rigorous requirements for military-grade components, including proper identification, data matrix barcodes, and secure containment to safeguard against damage or tampering during transit and storage. If the steering knuckles or associated materials contain hazardous substances, all applicable hazardous materials protocols must be followed, including proper documentation, segregation, labeling, and compliance with relevant safety and transportation regulations. This is a small business set-aside subcontract under the North American Industry Classification System code 423820, aimed exclusively at total small business participation as defined by the SBA and FAR 19.5. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense under the Land Supplier Operations Vehicle Support organization. The place of performance and point of contact details are not specified, but the work is tied to the DLA’s RFQ system under solicitation number SPE7L326U0670, and responders must ensure full compliance with federal procurement guidelines for defense logistics.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Defense-Compliant Packaging and Preservation ServicesThe contract requires defense-compliant packaging and preservation services for O-rings, with strict adherence to military standards. All components must be sealed in waterproof, UV-protected bags and preserved under cold and dry conditions to ensure long-term integrity and operational readiness in harsh environments. Each package must be uniquely bar-coded according to MIL-STD-129 requirements to enable precise tracking, identification, and inventory management across the defense logistics network. The work is designated as a subcontract under NAICS code 423820 and is associated with the Department of Defense’s Land Supply Chain. Performance is expected to take place at a designated facility in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with full compliance to all technical, environmental, and labeling specifications mandatory for award consideration.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThis contract requires the provision of packaging, preservation, and palletization services for mudguards in full compliance with military standards, covering both hazardous and non-hazardous materials. All work must adhere to the stringent requirements established by the Department of Defense to ensure the integrity, safety, and longevity of the components during storage and transit. The solicitation is designated as a Women-Owned Small Business Set-Aside under NAICS code 423820, which pertains to wholesale trade of motor vehicle supplies and new parts, and is structured as a subcontract opportunity. The opportunity was posted on August 2, 2026, with a firm response deadline of August 17, 2026, giving prospective bidders exactly fifteen days to submit their proposals. The contracting activity is under LSO Combat Vehicles and Armament, and while specific location details for performance or contact are not provided, all deliverables must align with federal military specifications regardless of geographical placement.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Packaging and Preservation ServicesThe contract requires the provision of military-compliant packaging, preservation, palletization, and labeling services for an insulation support component, adhering strictly to DLA, ASTM, and MIL-STD specifications. All work must meet rigorous defense industry standards to ensure product integrity during storage and transit under demanding operational conditions. The component is destined for performance at Cherry Point, North Carolina, with the full scope governed by federal military procurement protocols. This subcontract is open for response until August 10, 2026, with the solicitation posted on August 2, 2026, under the NAICS code 423820 for wholesale trade of miscellaneous durable goods. The contracting activity falls under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV. No set-aside designation is specified, and the procurement is not restricted to particular small business categories. The full details and submission instructions can be accessed via the provided DIBBS portal link.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

MIL-STD-2073-1E Compliant PackagingThe contract requires the provision of packaging for RF cable assemblies that strictly adheres to MIL-STD-2073-1E and DLA RP001 standards, ensuring full compliance with military preservation and protection protocols. This includes implementing Preservation Method 10, which mandates thorough cleaning and drying processes to prevent corrosion and contamination, along with the use of a unit container designated as E5 and an outer protective item labeled M to safeguard the assemblies during transit and storage. All items must be palletized in accordance with specified guidelines to ensure stability, handling efficiency, and compliance with logistical requirements. This subcontract is issued by the ASC Commodities Division under the Department of Defense, with performance required at the facility located in New Cumberland, Pennsylvania, ZIP code 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The NAICS code 423820 identifies the industry classification as wholesale trade of electronic parts and equipment supplies. This opportunity is structured as a subcontract without a specific set-aside designation and is accessible through the DIBBS platform for qualified vendors seeking to fulfill DoD packaging and logistics mandates for sensitive electronic components.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

OEM New Holland

Solicitation # IW254979-A

The Texas Department of Criminal Justice is seeking bids to establish a blanket purchase order for original equipment manufacturer replacement parts compatible with New Holland tractors and implements. This procurement is intended to support the maintenance and operational readiness of agricultural and utility equipment used across TDCJ facilities in Texas. The solicitation, identified as IW2454979, was posted on July 31, 2026, with responses due by August 14, 2026, at 9:00 PM CT. Bidders must be prepared to supply authorized OEM parts that meet strict compatibility and quality standards for the specified equipment. The contract does not specify a set-aside classification and is open to all qualified vendors without restriction based on small business or other categories. Performance of the contract will occur throughout the state of Texas wherever TDCJ-operated equipment is located, with no specific city identified as the primary location. Nuvia Gallegos-Ruiz serves as the primary point of contact for this solicitation and can be reached via phone at 936-437-3887 or email at Nuvia.Gallegos-Ruiz@tdcj.texas.gov for inquiries related to requirements, submission guidelines, or technical specifications. All proposals must be submitted through the Texas SmartBuy portal accessible via the provided UI link. Vendors are expected to demonstrate the ability to consistently supply timely and accurate replacement parts under the blanket purchase order, ensuring minimal downtime for critical equipment. There are no NAICS codes or additional set-aside provisions listed, indicating this is a standard competitive procurement open to any eligible supplier capable of fulfilling the stated needs.

Texas Department of Criminal Justice

POSTED

DEADLINE

Agricultural & Ground Support Equipment SupplyThe contract involves the supply of agricultural machinery parts and ground support equipment such as mowers, tractors, and utility vehicles under designated National Stock Numbers, ensuring standardized procurement across military and defense operations. It is structured as a subcontract under the Defense Logistics Agency within the Department of Defense, with the NAICS code 423820 indicating wholesale trade of agricultural machinery and equipment. The contract's performance scope is not restricted to a specific geographic location, allowing for flexible delivery to meet operational needs across various defense installations. All provided equipment must comply with military specifications and be integrated into existing logistical frameworks supporting ground operations and maintenance readiness.

Defense Logistics Agency

POSTED

DEADLINE

Military Packaging & Marking ServicesThe contract requires full compliance with MIL-STD-129 and MIL-STD-2073-1E standards for the packaging and marking of military equipment and supplies, ensuring uniformity and traceability throughout the Defense Logistics Agency’s supply chain. This includes the application of standardized barcoding, accurate shelf-life labeling, and clear special handling instructions to support efficient logistics operations in diverse operational environments. All packaging must meet rigorous military specifications for durability, environmental protection, and identification to ensure readiness and accountability from point of origin to final destination. This is a subcontract under the Department of Defense, with the NAICS code 423820 indicating it falls under merchant wholesalers of durable goods. The contract was posted on July 31, 2026, and the place of performance and specific office details are not specified, but the work is tied to the broader logistical needs of the Defense Logistics Agency. The contract’s success hinges on strict adherence to military standards, with no tolerance for deviations in marking, labeling, or packaging procedures, as noncompliance could disrupt battlefield logistics and materiel readiness.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Insulating Cover Blanket (NSN: 1660-01-472-5136)The contract calls for the supply of 306 new and unused insulating cover blankets identified by NSN 1660-01-472-5136, all of which must comply with military specifications to ensure functional integrity and safety. These blankets are critical components intended for operational use where thermal protection and reliability are non-negotiable, and the requirement emphasizes that no used, refurbished, or non-conforming items will be accepted. The solicitation is categorized as a subcontract under NAICS code 335999, indicating it falls within other electrical equipment and component manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The opportunity was posted on August 5, 2026, with a firm response deadline of August 11, 2026, leaving a six-day window for qualified suppliers to submit proposals. While the place of performance and point of contact details are unspecified, the transaction is facilitated through the DIBBS system, and vendors must ensure full adherence to military standards and delivery timelines to meet contractual obligations.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Supply of Machine Thread Plugs (NSN: 5365-011146444)The contract entails the supply of standardized machine thread plugs designated by NSN 5365-011146444, manufactured to meet military specifications for precision applications in defense or industrial systems. These components are critical for ensuring thread integrity and dimensional accuracy in high-stakes operational environments, requiring strict adherence to quality and performance standards. The offering is structured as a subcontract with recurring delivery obligations, indicating an ongoing need for these hardware items across multiple procurement cycles. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The North American Industry Classification System code 332510 identifies the category as machine shop and related services, underscoring the manufacturing and precision machining nature of the work. Performance is expected to be coordinated under DLA-managed logistics channels, though specific delivery locations are not outlined. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.

Hardware Manufacturing

POSTED

DEADLINE

PLUG, MACHINE THREAD

Solicitation # SPE4A7-26-Q-0974

The contract pertains to the procurement of seven units of a machine thread plug with NSN 5365-00-854-2899, issued under solicitation number SPE4A7-26-Q-0974 by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 182 days after contract award, and responses must be submitted by August 15, 2026. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, meaning any disclosure to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only contractors certified under the US/Canada Joint Certification Program, with completed DLA training and approved access, are permitted to receive the technical data. The primary point of contact for the solicitation is Mykhara Robinson, reachable via email at mykhara.robinson@dla.mil.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-617T

The contract pertains to the procurement of one aircraft skin identified by NSN 1560-01-366-4266, with a delivery requirement of 142 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent documentation and compliance requirements including source approval submission, DLA packaging standards, and cybersecurity maturity model certification level 2 by a certified third-party assessment organization. Configuration changes require formal engineering change proposals for any deviations or waivers. Inspection and acceptance must occur at the manufacturer’s origin, and non-accepted items must have all government identification removed. Components are governed by Qualified Products Lists or Qualified Manufacturers Lists as defined in procurement note H02, and physical marking of the bare item is mandatory. While unique identification is not required per the service customer’s request, export control restrictions apply to associated technical data under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including employees of U.S. companies abroad. Distribution of such data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, confirmed training completion, and formal DLA authorization. The contract falls under solicitation SPE4A7-26-T-617T, issued by the Department of Defense through the ASC Supplier Operation AE and AF Division, with performance at Tinker AFB and a response deadline of August 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-617P

The contract is for the procurement of 77 units of a SPACER, PLATE with NSN/Part Number 5365-00-768-1020 under solicitation SPE4A7-26-T-617P, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 233 days from award, with performance taking place in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is classified under NAICS code 332510. This item is subject to a comprehensive set of technical, quality, and compliance requirements defined by the DLA Master List of Technical and Quality Requirements, including specific clauses such as RD002 on Covered Defense Information, RQ017 on physical identification and bare item marking, and RQ032 on export control. Technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons both within and outside the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Packaging, government identification removal, and cybersecurity compliance including CMMC Level 2 certification for third-party assessors are also mandatory.

Hardware Manufacturing

POSTED

DEADLINE

CYLINDER, INNER SHOC

Solicitation # SPE4A7-26-R-X998

The contract pertains to the procurement of one cylinder, inner shock absorber, boom stowage, identified by NSN 1680-00-672-8041, with a delivery deadline 365 days after award. The solicitation is a total small business set-aside under FAR 19.5, issued by the Department of Defense under agency code SPE4A7-26-R-X998, with a response deadline in August 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is not subject to Item Unique Identification per customer request, in accordance with DFARS 252.211-7003(c)(1)(i). Cyberspace requirements mandate CMMC Level 2 certification for third-party assessors, and physical identification or bare item marking must comply with specified protocols. Packaging must conform to DLA procurement standards, and tailored quality requirements apply to both manufacturers and non-manufacturers. Any configuration changes require formal engineering change proposals. Inspection and acceptance must occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Export control applies to associated technical data under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, wherever located; access is restricted to contractors with approved JCP certification, completed DOD export handling training, and DLA authorization. DFARS 252.225-7048 governs this data handling restriction.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-617Y

The contract is for the procurement of 1,429 units of BOLT, CLEVIS with NSN 5306-00-151-3538 under solicitation SPE4A7-26-T-617Y, issued by the Department of Defense through ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 170 days of award, with FOB origin terms and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The unit of issue is each, with no tolerance for quantity variance. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards, and packaging must adhere to ASTM D3951 as well as MIL-STD-129 for marking and labeling. Palletization must meet DLA Packaging Requirements, and government identification must be removed from non-accepted items. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with verification levels or AQLs assigned based on attribute criticality, and zero non-conformances required unless otherwise specified. Identification markings must conform to MIL-STD-130N in addition to manufacturer-specific data. The required delivery date is March 25, 2027, with a need ship date of January 31, 2027, and the contract references specific DLA transportation procedures for shipping and first destination handling.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

PIVOT BLOCK ASSY, LA

Solicitation # SPE4A7-26-T-618N

The contract is for the procurement of 22 units of a Pivot Block Assembly with NSN 1560-01-165-5479 under solicitation SPE4A7-26-T-618N, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division. Delivery is required within 79 days after award, with the place of performance located in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026. This item contains technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons, regardless of location, or to foreign subsidiaries requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only DLA contractors with approved JCP certification, completion of mandatory DOD export control training, and approval from DLA authorities are permitted to access the technical data. The NAICS code is 336413, and all distribution must comply fully with DLA packaging and export control requirements.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

DUCT ASSEMBLY, AIR C

Solicitation # SPE4A7-26-T-618E

This contract pertains to the procurement of a duct assembly for air conditioning-heating systems, identified by part number 4A92040-103A and NSN 1660008833626, with a required quantity of five units. The item is source-controlled and must be manufactured and tested in strict accordance with limited rights data held by Lockheed Martin Corporation and sourced exclusively from Arrowhead Products Corporation, with no alternative suppliers permitted unless an approved source approval request is submitted and granted. Technical and quality requirements are governed entirely by the DLA Master List of Technical and Quality Requirements, with specific protocols for inspection, testing, and documentation, including the use of zero-defect sampling under MIL-STD-1916 or ASQ H1331, and mandatory adherence to verification levels and AQLs for critical, major, and minor attributes. All items must be inspected and accepted at origin, with no tolerance for quantity variance, and must be packaged in compliance with ASTM D3951 and MIL-STD-129, as superseded by DLA packaging standards, with palletization following RP001 guidelines. The item is designated as a critical application and requires physical identification and labeling per RQ017. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. The delivery is FOB origin with a 473-day lead time, and the required delivery date is January 12, 2028, with a need ship date of November 30, 2027. The contract designates Robins Air Force Base, Georgia as the sole delivery point, and unit price is set at $5.00 per unit. Government identification must be removed from non-accepted supplies, and item unique identification is waived per customer request.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

FAIRING, LAUNCHER, GUIDED MISSILE AIRCRAFT

Solicitation # SPE4A7-26-R-X989

The contract pertains to the procurement of a fairing, launcher, and guided missile aircraft configuration controlled under Lockheed Martin Corporation’s drawing number 16S307, Revision K, with part number 16S307-1, sourced from Alek Industries Inc and Lockheed Martin Corporation. The item is identified by NSN 1440-01-073-2293, with a quantity of one unit, and requires delivery within 230 days after delivery order. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with applicable revisions governed by the solicitation or award date depending on acquisition size. The item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to export-controlled data is restricted to DLA contractors with approved JCP certification, completed training on handling DOD export-controlled data, and explicit approval from the DLA controlling authority. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and physical identification of the item must adhere to bare item marking standards. Configuration changes require formal engineering change proposals, and government identification must be removed from non-accepted supplies. Packaging must conform to DLA procurement requirements. The solicitation, numbered SPE4A7-26-R-X989, was posted on August 5, 2026, with a response deadline of August 13, 2026, and is a total small business set-aside under FAR 19.5. The contracting office is under the Department of Defense, specifically the ASC Supplier Oper AE and AF DIV, with Lamar Olivier designated as the primary point of contact.

Guided Missile and Space Vehicle Manufacturing

POSTED

DEADLINE

PLATE, TEMPETURE IND

Solicitation # SPE4A7-26-R-XA01

The contract is for a single unit of a temperature indicator plate, identified by NSN 1650-01-034-8563 and part number 240-180F, supplied by Palmer Wahl Instruments Inc. under a firm fixed price arrangement with no tolerance for quantity variance. Delivery is required within 75 days after award, with both inspection and acceptance occurring at the origin. The item is classified as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA packaging guidelines, with palletization following specified procurement standards. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise dictated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must implement configuration change management, ensure physical identification per RQ017, maintain measuring equipment calibration under RT001, and submit documentation for source approval per RC001. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and covered defense information controls apply per RD002. The contract is a total small business set-aside, with the prime point of contact at the Department of Defense’s ASC Supplier Operations division.

POSTED

DEADLINE

PIN, QUICK RELEASE

Solicitation # SPE4A7-26-T-618L

The contract pertains to the procurement of 3,250 units of a quick release pin identified by NSN 5315-01-525-4843 and part number QRD3B1025Z, classified as a commercial item. Delivery is required within 113 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. All units must comply with stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951, though packaging must conform to ASTM D3951 and be marked and labeled per MIL-STD-129. Packaging and palletization must adhere to DLA’s RP001 requirements, and the unit of issue is each (EA) with zero tolerance for quantity variance. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. The item is designated as a critical application item and must bear physical identification per RQ017. Documentation for source approval, compliance with DLA packaging, and removal of government identification from non-accepted supplies are mandatory. The delivery address is DLA Distribution Albany, and the original required delivery date is December 16, 2026, with a needed ship date of July 23, 2026. The contract is issued under solicitation SPE4A7-26-T-618L with a total price of $3,250.00, and all terms are governed by the DLA framework for simplified acquisition.

Other Fabricated Wire Product Manufacturing

POSTED

DEADLINE