Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging and Labeling Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires full compliance with MIL-STD-2073-1E and MIL-STD-129 standards for the packaging, preservation, and labeling of cable assemblies, ensuring all components meet rigorous military specifications for durability, environmental protection, and traceability during storage and transit. All packaging methods must be designed to safeguard the integrity of the assemblies throughout the supply chain, with documentation strictly aligned with government shipment requirements to facilitate seamless receipt and inventory management by defense logistics personnel. This subcontract, issued under the Defense Logistics Agency within the Department of Defense, falls under NAICS code 339920 and is intended to support military logistics operations through precise, standardized handling procedures. While the exact delivery location and point of contact are not specified, the work is expected to be performed in alignment with federal mandates, with all outputs subject to verification against established military standards. The solicitation has been publicly posted and is available for bidding through the DIBBS system, emphasizing the need for contractors to demonstrate proven expertise in defense-grade packaging and labeling services.

General Info

Packaging and labeling of cable assemblies per MIL-STD-2073-1E and MIL-STD-129 for defense logistics.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

339920 - Sporting and Athletic Goods ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide MIL-STD-2073-1E and MIL-STD-129 compliant packaging, preservation, and labeling for the cable assembly, including proper documentation for government shipment.

Similar Contracts

Same NAICS industry code

EAR Muff Manufacturing and SupplyThe contract seeks the manufacture and supply of 17,500 units of ear muffs identified by NSN 4240-01-469-8738, requiring full compliance with Department of Defense technical specifications, packaging standards, labeling requirements, and hazardous materials regulations. All delivered items must meet rigorous military-grade quality and safety criteria to ensure operational effectiveness and logistical compatibility. The solicitation is structured as a subcontract under NAICS code 339920, targeting specialized manufacturers capable of fulfilling defense procurement mandates. The proposal submission deadline is August 5, 2026, with the solicitation posted on July 29, 2026, offering a seven-day window for responses. The contract falls under the purview of the Department of Defense, managed by the Construction & Equipment MRO Service I office, though specific performance location and point of contact details are not provided. All vendors must adhere to DLA’s stringent documentation and compliance protocols to be considered for award.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Defense-Compliant Packaging & PreservationThis contract requires the packaging of defense components in strict compliance with MIL-STD-2073-1E standards, encompassing comprehensive preservation techniques, corrosion inhibition, and environmental protection measures to ensure long-term readiness and operational integrity. The work must adhere to rigorous military specifications for storage, handling, and shipment under diverse environmental conditions, with all materials and methods selected to safeguard the component from moisture, oxidation, contamination, and physical damage. The contract is a subcontract solicited by the Department of Defense through CCAD DETACHMENT, with a place of performance located in Corpus Christi, Texas, 78419-5255. The North American Industry Classification System code is 339920, indicating the focus is on other miscellaneous fabricated metal product manufacturing. Responses are due by August 6, 2026, with the solicitation posted on July 29, 2026, and all work must be completed with full alignment to federal defense packaging protocols without deviation.

CCAD DETACHMENT

POSTED

DEADLINE

Chemiluminescent Light Supply and ManufacturingThe contract entails the manufacture and supply of 43 pallets of chemiluminescent lights identified by NSN 6260-01-230-8597, with strict compliance required to military standards including MIL-STD-2073-1E for packaging and handling, as well as adherence to specified shelf-life requirements to ensure operational readiness. The items are intended for defense use and must fully meet all technical and logistical specifications mandated by the Department of Defense. This is a subcontract solicitation issued by DLA DIST SAN JOAQUIN under NAICS code 339920, with proposals due by August 3, 2026, and the solicitation posted on July 29, 2026. The place of performance and point of contact information are not specified, but the contract is accessible through the DIBBS system for qualified bidders.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Specialized Packaging and Marking ServicesThe contract requires specialized packaging and marking services for electromagnetic relays in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for labeling and marking requirements. All packaging must ensure the protection and integrity of the relays during storage and transportation, while the marking must include standardized barcodes, lot numbers, and other identifying information as mandated by military specifications. Additionally, hazardous material labeling must adhere to OSHA 29 CFR 1910.1200, ensuring proper hazard communication through labeled containers and documentation for any materials classified as hazardous under federal regulations. The work is to be performed at Hill Air Force Base with a zip code of 84056-5734, under the oversight of the Department of Defense’s Active Devices Division. This is a subcontract opportunity under NAICS code 339920, with a response deadline of August 10, 2026, and a posted date of July 29, 2026. There is no specified set-aside classification, and the solicitation is accessible through the DIBBS platform. All contractors must demonstrate full compliance with both military and federal hazardous materials regulations, and the ability to maintain documentation to verify adherence to these standards is essential. The performance location is fixed at Hill AFB, and all deliverables must meet the exacting standards required for military logistics and supply chain operations.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE8E9-26-Q-0635

The contract specifies the procurement of 17,500 units of ear muffs with NSN 4240-01-469-8738 under solicitation SPE8E9-26-Q-0635, with a firm delivery deadline of 60 days after award. All supplies must comply with DLA packaging requirements detailed in RP001 and MIL-STD-2073-1E, including specific packaging methods, containment materials, and unit container specifications. The items are to be delivered FOB origin and inspected and accepted at destination, with no tolerance for quantity variance. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries or sensors, and any permitted mercury-containing devices must include a secondary containment barrier in accordance with NAVSEA 5100-003D. Packaging and marking must follow MIL-STD-129 without special codes, and palletization must adhere to the DLA RP001 standard. Hazardous material shipping procedures are governed by DLAD PROC NOTE C19 and C20, with shipments directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The government’s material need date is set for September 30, 2026, and the point of contact for inquiries is Luis Marrero, with the solicitation response deadline on August 5, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Musical Instrument Supply – Professional Baritone SaxophonesThe contract pertains to the procurement of five Yamaha YBS-82 Custom Professional Baritone Saxophones, each to be delivered with full manufacturer warranty and official certification, ensuring authenticity and high-performance standards. All instruments must be packaged in compliance with required specifications to guarantee safe transport and preservation of condition upon delivery. The procurement is classified as a subcontract under NAICS code 339920, indicating it involves the manufacturing of musical instruments. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, at 2:00 PM. The place of performance is designated as Millington, Tennessee, with a ZIP code of 38054, and the contracting organization is the Naval Supply Systems Command Fleet Logistics Center Norfolk under the Department of Defense. The contract aims to support military or institutional musical programs requiring top-tier professional equipment.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

Disadvantaged Business Enterprise (DBE) Subcontracting CoordinationMetra is seeking certified Disadvantaged Business Enterprises (DBE), Minority Business Enterprises (MBE), or Women Business Enterprises (WBE) to serve as subcontractors in support of manufacturing, testing, and fabrication activities under a federal compliance initiative aimed at meeting participation goals for underrepresented businesses. The opportunity is tied to NAICS code 339920, which covers other miscellaneous manufacturing, and requires subcontractors to contribute directly to project scopes that involve production, quality assurance, and component fabrication. Interested certified firms must submit their responses by August 21, 2026, with no solicitation number provided, and the opportunity is open through the BonfireHub platform. There is no specific location designated for performance, and no point of contact details are listed, indicating that all communications and submissions must go through the designated online portal. The effort aligns with federal and state equity objectives, and participation is contingent on valid DBE, MBE, or WBE certification status.

POSTED

DEADLINE

Passenger Seat Cushion Manufacturing and AssemblyThe contract involves the fabrication and assembly of railcar seat cushions for Metra, requiring precise manufacturing processes including foam cutting, application of silicone toppers, upholstering with cotton duck fabric, and final assembly to comply with Federal Railroad Administration and original equipment manufacturer standards. All work must meet rigorous safety, durability, and comfort requirements specific to passenger rail applications, ensuring consistency and reliability across the fleet. Bids are due by August 21, 2026, with the solicitation posted on July 28, 2026, under the NAICS code 339920 for other transportation equipment manufacturing. The work is classified as a subcontract and will be performed in Illinois, though the exact location is not specified. Interested parties must submit proposals through the Metra BonfireHub portal by the deadline to be considered for award.

POSTED

DEADLINE

Tactical Gear and Equipment SupplyNorthside ISD is seeking suppliers to provide tactical gear and equipment essential for law enforcement personnel, including body armor, duty belts, holsters, handcuffs, flashlights, and associated accessories. The contract is structured as a subcontract under NAICS code 339920, which pertains to other sporting and athletic goods manufacturing, indicating a focus on specialized protective and operational equipment. The solicitation was posted on July 28, 2026, with a firm response deadline of August 20, 2026, giving potential vendors approximately three weeks to prepare and submit proposals. The place of performance and agency office details are unspecified, but the contracting entity is located in Texas. Only interested parties with the capability to meet stringent quality and delivery standards for law enforcement-grade gear should pursue this opportunity, as compliance with performance expectations is critical. The contract lacks details on set-asides, point of contact information, or specific volume requirements, suggesting that bidders must clarify these aspects directly through the provided portal link.

POSTED

DEADLINE

Supply of Industrial Goggles (NSN 4240014925720)The contract entails the procurement and delivery of 30 units of industrial goggles designated by the National Stock Number 4240014925720 and part number EE7018-20, compliant with NSN standards, to Camp Kinser in Okinawa, Japan. Delivery is arranged under FOB destination terms, meaning the supplier assumes all responsibility and risk until the goods reach the specified delivery point. The order is governed as a subcontract under the NAICS code 339920, which classifies the manufacturing of other miscellaneous fabricated metal products, indicating the goggles are produced within this manufacturing category. The contracting authority is the Defense Logistics Agency, operating under the Department of Defense, with the solicitation posted on July 28, 2026, though no solicitation number is provided. The agreement is part of a broader logistics effort to equip personnel with certified protective eyewear, ensuring compliance with military safety requirements at the overseas installation.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Single-Use Protective SpectaclesThe contract seeks the supply of single-use, latex-free, non-sterile protective eyewear in bulk packaging, specifically designed to meet federal safety and labeling standards. The product must comply with all applicable regulatory requirements for personal protective equipment intended for use in medical or industrial settings where eye protection is necessary but sterile conditions are not required. Suppliers are expected to deliver the eyewear in quantities sufficient for bulk distribution, with all packaging and labeling accurately reflecting product specifications, material composition, and compliance certifications. This is a subcontract under the Department of Defense’s Medical Supply Chain, managed by the MEDICAL SUPPLY CHAIN MD SURG FSF office, with performance required at the specified location in Annville, Pennsylvania, 17003-5003. The solicitation, categorized under NAICS code 339920 for other medical and dental equipment and supplies, was posted on July 28, 2026, and responses are due by August 3, 2026. The procurement is open to eligible subcontractors who can meet technical specifications, quality assurance standards, and delivery timelines without requiring sterile or custom configurations, focusing instead on cost-effective, high-volume production and adherence to federal regulations.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Industrial Safety SpectaclesThe contract entails the procurement and delivery of four units of industrial safety spectacles that meet ANSI Z87.1 standards, identified by the National Stock Number 4240-01-525-3095. These spectacles must be packaged, labeled, and shipped in strict compliance with military specifications to ensure traceability and readiness for military use. The delivery destination is Fort Stewart, Georgia, and all requirements must be fulfilled no later than September 28, 2026. The acquisition falls under the NAICS code 339920, classifying it within the manufacturing of other health and safety equipment. This is a subcontract managed by the Defense Logistics Agency under the Department of Defense, with no specific set-aside provisions or small business designations indicated. The contract was posted on July 28, 2026, and its performance is tied directly to meeting federal safety and logistics standards for protective equipment.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Commercial Safety Step Ladder SupplyThe contract is for the procurement and delivery of a single safety step ladder coded under the National Stock Number system, ensuring full compliance with federal logistics and delivery standards. It is issued under the Defense Logistics Agency, which operates under the Department of Defense, and is classified as a subcontract with a NAICS code of 332420 indicating manufacturing of metal kitchen and bathroom fixtures. The solicitation is open for responses until August 10, 2026, with an initial posting date of July 29, 2026. The place of performance is specified as Oak Harbor with a zip code of 98278-5200, and while no specific point of contact is listed, all submissions must align with DLA’s logistical protocols and delivery expectations. The contract is accessible through the DIBBS platform for full solicitation details and response submission.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Unable to Decompose Subcontract OpportunitiesA system outage resulting in a 504 gateway timeout has prevented access to the prime contract details, making it impossible to identify or structure any subcontract or supplier opportunities. The solicitation, titled Unable to Decompose Subcontract Opportunities, was posted on July 29, 2026, with a response deadline of August 10, 2026, and is categorized as a subcontract under the Defense Logistics Agency within the Department of Defense. No solicitation number, NAICS code, set-aside type, organizational information, or point of contact is available due to the data retrieval failure. The place of performance and office address fields are also unspecified. The only accessible reference is a link to the DIBBS portal where the record is hosted, but without the underlying prime contract data, no actionable subcontract opportunities can be determined.

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThis contract requires the implementation and documentation of NIST SP 800-171 security controls to safeguard covered defense information and ensure timely reporting of cyber incidents as mandated by the Defense Federal Acquisition Regulation Supplement. The work is part of a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, with performance located at Fort Stewart, Georgia, 31314-5185. The contractor must fully align with NIST’s framework for protecting sensitive federal information and comply with all DFARS requirements regarding incident response, documentation, and continuous security posture maintenance. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and is classified under NAICS code 541512 for computer systems design services. The contract emphasizes adherence to federal cybersecurity standards without specifying any set-aside classifications, indicating it is open to eligible subcontractors regardless of business size or status. The successful party will be responsible for not only deploying technical safeguards but also generating comprehensive documentation to demonstrate compliance with all applicable controls and reporting obligations throughout the contract lifecycle.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Labeling and ComplianceThe contract pertains to the preparation of hazard labels and Material Safety Data Sheets for components that contain hazardous materials, specifically including mercury, ensuring full compliance with Occupational Safety and Health Administration and Defense Federal Acquisition Regulation Supplement requirements. The work must be executed to meet federal safety standards for labeling and documentation, designed to protect personnel and maintain regulatory adherence across supply chain operations involving dangerous substances. This is a subcontract opportunity issued by the Defense Logistics Agency under the Department of Defense, with a NAICS code of 541620, indicating professional, scientific, and technical services related to environmental consulting. The place of performance is identified as Fort Stewart, Georgia, with a response deadline of August 10, 2026, and the solicitation was posted on July 29, 2026. The contract requires precise technical execution and documentation rigor to satisfy Department of Defense compliance protocols for hazardous material handling and transportation.

Environmental Consulting Services

POSTED

DEADLINE

Military Packaging and Palletization ServicesThe contract requires comprehensive packaging, preservation, and palletization services for battery retainers in strict adherence to Defense Logistics Agency and military standards. All work must include proper labeling, barcoding, and full compliance with FOB destination requirements to ensure readiness and traceability throughout the military supply chain. The services are to be performed at the designated place of performance in Fort Stewart, Georgia, with all materials handled to meet rigorous defense logistics protocols for durability, environmental protection, and operational deployment readiness. This subcontract opportunity is issued by the Department of Defense through the Defense Logistics Agency and is open for responses until August 10, 2026. The NAICS code 493190 indicates the scope includes other warehousing and storage services, specifically tailored to military-grade logistics. Participation is contingent upon the contractor’s ability to execute precise, standards-compliant handling and documentation procedures to support defense inventory systems, with all deliverables expected to synchronize with existing military distribution workflows and reporting mechanisms.

Other Warehousing and Storage

POSTED

DEADLINE

Battery Retainer Component SupplyThe contract seeks the manufacture and supply of a battery retainer cover identified by NSN 6160-01-566-3862 and Part No. 87705430, adhering strictly to military specifications and mandated packaging standards. The component is required for use by the Department of Defense and must be delivered to the designated place of performance at Fort Stewart, Georgia, with a ZIP code of 31314-5185. The solicitation falls under NAICS code 335311, classifying it within the battery and other power storage device manufacturing sector, and is structured as a subcontract opportunity with no set-aside designation. The procurement is managed by the Defense Logistics Agency, and interested parties must submit responses by the deadline of August 10, 2026, with the solicitation originally posted on July 29, 2026. All materials must comply with defense-grade quality and logistical requirements to ensure compatibility and reliability in operational environments.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Hazardous Materials Compliance and Flow-Down ManagementThe contract requires strict adherence to hazard communication standards under 29 CFR 1910.1200 to ensure the safe handling, storage, and use of potentially hazardous materials. This includes comprehensive management of safety data sheets (SDS) for all applicable components, ensuring accurate, accessible, and up-to-date documentation is maintained throughout the supply chain. The contractor must implement systems and procedures to guarantee compliance with federal regulations and provide proper training and information to personnel working with hazardous substances. Additionally, the contract mandates the flow-down of all hazard communication requirements to all subcontractors and suppliers involved in the project. This means the prime contractor is responsible for ensuring that every tier of the supply chain is aware of and adheres to the same safety protocols, documentation standards, and regulatory obligations. Failure to maintain compliance at any level may result in contractual noncompliance, safety risks, or regulatory penalties. The work is classified under NAICS code 541690 and is managed by the Defense Logistics Agency on behalf of the Department of Defense, with a response deadline of August 4, 2026.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Shelf-Life and Stability Testing ServicesThe contract seeks third-party testing and documentation services to validate a 36-month shelf life for medical dressings through accelerated aging and real-time stability studies conducted under strictly controlled environmental conditions. This effort will generate comprehensive data compliant with regulatory requirements to support the long-term performance and safety of the dressings in military medical supply chains. The work must be performed by qualified laboratories capable of meeting industry-standard protocols for stability testing and documentation, with results suitable for regulatory submission and quality control assurance. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, solicited under NAICS code 541620 for scientific testing and development services. The opportunity was posted on July 29, 2026, with a response deadline of August 4, 2026. The place of performance and point of contact details are not specified in the available data, but the work is expected to be executed by external testing entities contracted to deliver validated stability data. All testing must align with the required timeline to support the 36-month shelf life claim, ensuring the medical dressings remain viable and safe for use throughout their designated storage period.

Environmental Consulting Services

POSTED

DEADLINE

Medical Product Labeling and BarcodingThis contract requires the precise application of compliant labels on medical products to meet stringent Department of Defense logistics standards, specifically MMS1A and MIL-STD-129. Labels must include mandatory information such as the National Stock Number, contract number, lot number, unit identification, and hazard warnings, ensuring full traceability and regulatory adherence. Barcoding is a critical component, designed to support seamless integration with DoD supply chain tracking systems for accurate inventory management and distribution. The work is part of a subcontract issued under NAICS code 323111, with the Defense Logistics Agency as the overseeing organization under the Department of Defense. The solicitation was posted on July 29, 2026, and responses are due by August 4, 2026, with performance expected to align with federal logistics requirements across all designated locations.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Sterile Medical Packaging and UnitizationThe contract involves the sterile packaging and unitization of individual medical dressings in sealed, tamper-evident containers under controlled cleanroom conditions, ensuring compliance with federal standards for medical devices. All operations must adhere to strict sterilization protocols, including integrity testing to verify container seal quality and microbiological barriers, with emphasis on maintaining the sterility of each unit until point of use. The work requires full alignment with applicable FDA and Department of Defense regulations governing the packaging of sterile medical supplies. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, targets suppliers capable of high-volume, precision packaging operations suitable for military and healthcare applications. The solicitation, identified by the reference SPE2DS26T284U, was posted on July 29, 2026, with responses due by August 4, 2026. The North American Industry Classification System code 326199 indicates the scope covers other plastic product manufacturing not elsewhere classified, specifically applied here to medical packaging. Performance of this contract requires facilities equipped for cleanroom processing and certified quality systems to support consistent, audit-ready compliance with federal medical device packaging requirements.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Medical Device Manufacturing – Occlusive Adhesive DressingsThe contract calls for the manufacture of sterile, occlusive adhesive dressings designed to meet rigorous military medical standards, with performance requirements centered on transparency, strong and consistent adhesion, and effective microbial barrier properties. The product specifications align with established military-grade benchmarks similar to commercial products like TEGADERM, requiring precise formulation and multi-layered construction to ensure reliability in demanding field conditions. Quality assurance protocols must validate each batch for sterility, durability, and adherence to dimensional and material specifications under varying environmental stresses. The solicitation is issued as a subcontract under the NAICS code 339113 for Medical Equipment and Supplies Manufacturing, managed by the Defense Logistics Agency on behalf of the Department of Defense. Responses are due by August 4, 2026, with the solicitation posted on July 29, 2026. Performance is expected to occur under the oversight of the DLA, though specific geographic requirements for production or delivery are not detailed. All manufacturing processes must comply with federal defense procurement standards, including stringent documentation and traceability for components, packaging, and final product validation to support deployment in military medical operations.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Unable to Decompose Subcontract OpportunitiesThe contract titled Unable to Decompose Subcontract Opportunities was posted by the Defense Logistics Agency under the Department of Defense on July 29, 2026, with a response deadline of August 10, 2026. It is classified as a subcontract opportunity, though no specific set aside type, NAICS code, or organization type has been provided. The place of performance is identified as Fort Hood, Texas, with ZIP code 76544, while other details including the office address, point of contact, and solicitation number remain unspecified. The system was unable to retrieve or decompose the prime contract details, preventing a full breakdown of potential sub-opportunities. Further information can be accessed through the provided DIBBS link for additional context or updates.

POSTED

DEADLINE