Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging and Labeling Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of military-compliant packaging, kitting, and labeling services for 18 flexible drive shaft units, ensuring full adherence to MIL-STD-129 and DLA RP001 standards. All items must be properly packaged and labeled to meet Department of Defense requirements for identification, handling, and shipment, with the final delivery destination being Tracy, CA. The work is classified as a subcontract under NAICS code 493190, which pertains to other support activities for transportation, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 17, 2026, and the performance location is not explicitly defined beyond the final delivery point. The contract is linked to award record SPE8EF26P0376 and is intended to support logistical readiness through standardized military packaging practices.

General Info

Provide MIL-STD-129 and DLA RP001-compliant packaging and labeling for 18 drive shafts to Tracy, CA.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

493190 - Other Warehousing and StorageView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide MIL-STD-129 and DLA RP001 compliant packaging, kitting, and labeling for 18 flexible drive shaft units prior to shipment to Tracy, CA.

Similar Contracts

Same NAICS industry code

Logistics and Distribution of Pre-Qualified SealersThe contract involves the logistics, warehousing, kitting, and just-in-time delivery of pre-approved joint sealers to Texas Department of Transportation project sites throughout the state, with a primary focus on the Lubbock District. The successful bidder will be responsible for maintaining inventory, preparing kits according to project specifications, and ensuring timely delivery to support ongoing road and bridge maintenance operations. All sealers must be pre-qualified by TxDOT and delivered on a schedule that aligns with field work timelines to minimize project delays. This is a subcontract opportunity classified under NAICS code 493190, with responses due by August 7, 2026. The work is tied directly to TxDOT’s infrastructure needs and requires a robust distribution network capable of handling statewide logistics while meeting strict quality and timing standards. Providers must demonstrate experience in handling specialized construction materials and the ability to operate efficiently within TxDOT’s operational framework, particularly in the Lubbock region where demand is concentrated. All activities must be performed in compliance with TxDOT’s requirements for material handling, documentation, and delivery protocols.

Texas Department Of Transportation

POSTED

DEADLINE

Inventory, Logistics, and Just-in-Time Delivery ServicesPhiladelphia Gas Works is seeking a contractor to provide comprehensive inventory management, kitting, and just-in-time delivery services for parts required at its facilities across Pennsylvania. The work involves maintaining a ready supply of components, organizing them into kits as needed, and ensuring rapid response to urgent requests, potentially under a vendor-managed inventory model where the supplier assumes responsibility for monitoring stock levels and triggering replenishment. The contract is structured as a subcontract and falls under NAICS code 493190, indicating it is classified under other warehousing and storage services. Bids must be submitted by August 14, 2026, with the solicitation posted on July 31, 2026, indicating a two-week window for proposals. All performance is expected to occur at PGW sites within Pennsylvania, and the contractor must be prepared to operate with high reliability and speed to support critical utility operations.

Philadelphia Gas Works

POSTED

DEADLINE

Specialized Packaging and Marking ServicesThe contract involves specialized packaging and marking services for finished cable assemblies, requiring strict adherence to MIL-STD-2073-1E for packaging standards and MIL-STD-129 for labeling requirements. All packaging must include barcodes, CAGE codes, lot and serial numbers, and proper FOB origin coordination to ensure full compliance with military logistics protocols. The work is classified as a subcontract under NAICS code 493190 and is solicited by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 31, 2026, with a response deadline of August 31, 2026, and performance will be conducted in accordance with federal defense supply chain expectations, though specific performance location details are not provided. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Packaging, Marking, and Logistics for DeliveryThe contract requires the packaging and marking of wing panels in strict accordance with MIL-STD-129 standards, ensuring all items are properly labeled with 2D Data Matrix barcodes and clearly identified by NSN and part number. Logistics preparation must align with FOB Origin and Destination requirements to facilitate seamless delivery and tracking throughout the supply chain. The work is categorized as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to respond, as defined by the SBA and FAR 19.5. The North American Industry Classification System code 493190 indicates the work falls under Other Transportation Support Activities, reflecting the focus on logistics and packaging support rather than manufacturing. The solicitation is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV with a response deadline of August 28, 2026, and was posted on July 31, 2026, providing interested parties approximately four weeks to prepare and submit proposals.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Packaging, Labeling, and Palletization Services for Military ShipmentThe contract requires specialized preservation, packaging, labeling, and palletization services for indicating panels in full compliance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring military-grade readiness for transport and storage. All work must be performed to meet strict federal specifications for durability, identification, and handling procedures, with final delivery designated as FOB Origin, meaning the contractor assumes responsibility until the goods are loaded at the designated point of shipment. The services are critical to supporting military logistics and must be executed with precision to maintain supply chain integrity. This subcontract, issued under NAICS code 493190 by the ASC Commodities Division of the Department of Defense, is solicited with a response deadline of August 5, 2026, and the performance location is tied to Cherry Point, North Carolina, with ZIP code 28533-5040. Although no set-aside designation is specified, participation is open to qualified vendors capable of delivering compliant solutions under tight federal guidelines. The solicitation is managed through the DIBBS platform, and timely submission is essential to be considered for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging and Preservation Services for Defense LogisticsThe contract calls for comprehensive packaging, preservation, and marking services for wiring harnesses in strict compliance with Defense Logistics Agency guidelines and MIL-STD-129 requirements to guarantee the integrity and readiness of shipments for military use. All work must adhere to standardized procedures ensuring durable protection against environmental and physical damage during transit and storage, with precise labeling and documentation to support traceability and logistics operations across the defense supply chain. This subcontract opportunity, issued by the ASC Commodities Division under the Department of Defense, is classified under NAICS code 493190 and is open for responses until August 18, 2026. The performance location and specific delivery details are not specified, but successful bidders must be prepared to meet rigorous military standards for packaging and preservation without exception. The project emphasizes reliability and compliance over cost, targeting experienced service providers capable of handling sensitive defense components with proven expertise in federal supply chain protocols.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military Packaging and Marking ServicesThe contract requires the provision of packaging and marking services strictly aligned with MIL-STD-129 standards to ensure accurate identification, safe handling, and proper shipment of parts destined for DLA locations. All work must meet military specifications for labeling, labeling placement, containerization, and documentation to guarantee compliance during transit and receipt at federal supply chain nodes. The service scope centers on logistics readiness and interoperability within Department of Defense supply networks, emphasizing traceability and uniformity across all packaged items. This is a subcontract opportunity with a NAICS code of 493190, issued under the Aviation Supply Chain division of the Department of Defense. The solicitation was posted on July 31, 2026, with a response deadline of August 5, 2026. Performance is required to be conducted at Tracy, California, with a zip code of 95304-5000. The contract does not specify a set-aside classification or unique point of contact, and all submissions must be made through the DIBBS system using the provided UI link. Suppliers must be prepared to demonstrate capability in military-compliant packaging processes and full adherence to federal shipment protocols.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services for chain assemblies in strict accordance with Defense Logistics Agency standards. This includes the application of accurate barcoding for inventory tracking and full compliance with hazardous communication regulations to ensure safe handling and transport. All work must meet the stringent requirements for military-grade documentation, material protection, and labeling procedures to support logistics and operational readiness. The scope encompasses the full lifecycle preparation of chain assemblies from packaging through final marking, ensuring they are ready for deployment under Department of Defense protocols. This is a subcontract under the NAICS code 493190, issued by the Land Supply Chain division of the Department of Defense, with a response deadline of August 31, 2026. The performance location is not specified, but adherence to federal military logistics standards is mandatory. The solicitation is accessible via the DIBBS platform, and all submissions must comply with the detailed technical and regulatory expectations outlined by DLA without deviation. No set-aside provisions are indicated, meaning the opportunity is open to all qualified subcontractors capable of meeting the military compliance requirements.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Packaging & Preservation ServicesThe contract requires the provision of military-grade packaging and preservation services for adjustable clevises in full compliance with MIL-STD-2073-1E standards, ensuring that all items are properly cleaned, dried, and protected against corrosion and environmental damage during storage and transit. The packaging must include stretch wrap containerization as the specified method for securing and stabilizing the items within shipping containers, maintaining integrity and preventing movement during handling. All work must adhere to strict defense logistics protocols to guarantee readiness and operational reliability. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside category, designated under NAICS code 493190, and issued by the Department of Defense’s ASC Commodities Division. Interested parties must submit proposals by the deadline of August 20, 2026, with performance expected to meet exacting military specifications and timelines. The contract emphasizes quality control, regulatory compliance, and the use of approved preservation and packaging techniques to support the Department of Defense’s supply chain requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging and Labeling Services for Defense ShipmentsThe contract requires comprehensive packaging, labeling, and palletization services for defense hardware shipments, strictly adhering to MIL-STD-129 standards to ensure compliance with Department of Defense requirements. All materials must be shock-proof contained and equipped with accurate barcode labeling to support traceability and logistics operations throughout the supply chain. The work must be performed to guarantee the integrity and readiness of defense equipment during transportation and storage, with special emphasis on durability and regulatory compliance. Performance is centered at the specified location in Fresno, California, with a response deadline of August 5, 2026, and the solicitation was posted on July 31, 2026. This is a subcontract opportunity under NAICS code 493190, managed by the ASC Commodities Division of the Department of Defense. Participation is open to qualified vendors capable of meeting the stringent packaging and labeling specifications required for military logistics, with no set-aside restrictions specified. All submissions must fully satisfy the technical and procedural demands outlined for defense-grade handling and documentation.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging, Labeling, and Palletization ServicesThe contract entails the final packaging, labeling, and palletization of splash guards to meet MIL-STD-129 and RP001 specifications, ensuring full compliance with U.S. Department of Defense packaging and marking standards. All work must be performed in accordance with stringent military guidelines that govern the uniformity, durability, and traceability of labeled items, particularly for logistics and inventory management throughout the defense supply chain. The services are critical to maintaining operational readiness and seamless integration of components into military distribution networks. This subcontract is issued under the Defense Logistics Agency, part of the Department of Defense, with a NAICS code of 493190 indicating it relates to other transportation and warehousing support services. The contract was posted on July 31, 2026, and is accessible via the DIBBS platform, though no specific place of performance or point of contact details are provided. The work will support military logistics requirements, and the contractor is expected to deliver fully compliant, ready-to-ship units that uphold the Department’s rigorous standards for handling, storage, and transportation of defense equipment.

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Labeling, and Logistics for Filter DeliveriesThe contract requires comprehensive packaging, labeling, and logistics services for HVAC filter shipments, with strict adherence to compliance standards. Key responsibilities include single-brand segregation to prevent cross-contamination, shrink-wrapping of products for protection and stability, and accurate documentation on all cartons and pallets to ensure traceability and regulatory compliance throughout the supply chain. All activities must align with industry best practices for handling and transporting air filtration products. The solicitation is issued under the NAICS code 493190 for Other Warehousing and Storage and is structured as a subcontract opportunity. It was posted by the Texas Health and Human Services Commission with a response deadline of August 19, 2026. While specific locations and point of contact details are not provided, performance is expected to support delivery needs linked to the agency’s operations in Texas. Interested parties must submit proposals through the designated portal by the stated deadline to be considered for award.

Health and Human Services Commission

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cybersecurity and CUI SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information and ensure full compliance with DFARS 252.204-7012. This subcontract is under the Defense Logistics Agency, part of the Department of Defense, and focuses on establishing a robust cybersecurity framework that meets federal requirements for handling sensitive unclassified information. The work involves assessing current systems, applying technical and administrative safeguards, and sustaining compliance through continuous monitoring, documentation, and remediation of identified gaps. The contract carries a NAICS code of 541512, indicating it pertains to computer systems design and related services, and is structured as a subcontract with no set-aside designation. All performance activities must align with the standards outlined in NIST SP 800-171, ensuring that CUI is properly identified, stored, transmitted, and accessed only by authorized personnel. The contract is posted as of July 31, 2026, and the place of performance is not specified, meaning work may occur at various locations as required by the subcontractor’s operational needs. Compliance is non-negotiable, and failure to maintain controls could result in contract termination or penalties under federal acquisition regulations.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires the identification, documentation, and continuous management of hazardous materials utilized in manufacturing processes, ensuring strict adherence to regulatory and contractual standards. A core obligation is the timely submission and regular updating of Safety Data Sheets (SDS) to reflect any changes in material composition, handling procedures, or safety protocols, with all documentation maintained in full compliance with established requirements. This ongoing responsibility demands vigilant monitoring and proactive communication to maintain accuracy and compliance across the supply chain. The work is performed under a subcontract classified under NAICS code 541690, issued by the Defense Logistics Agency within the Department of Defense. The contract was posted on July 31, 2026, and its performance is tied to federal defense manufacturing operations, though specific locations are not indicated. Effective execution requires robust systems for tracking hazardous substances, rigorous recordkeeping, and seamless coordination with relevant stakeholders to ensure that SDS documentation remains current and accessible at all times, supporting safety, regulatory compliance, and operational continuity.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Precision Machining and Fabrication ServicesThe contract involves precision secondary machining, drilling, and finishing operations on splash guard components to meet the dimensional tolerances and surface finish specifications outlined in drawing NR 16236 2540V0744, Rev D. Work under this subcontract requires strict adherence to technical requirements to ensure component functionality and interoperability within defense systems. The operations are critical to the final assembly and performance of the splash guard, necessitating advanced machining capabilities and quality control processes aligned with aerospace and defense industry standards. This agreement falls under NAICS code 332721 for Metal Finishing and is issued by the Defense Logistics Agency under the Department of Defense. The contract was posted on July 31, 2026, and performance is expected to occur at an unspecified location. The primary intent is to secure specialized fabrication services to support military equipment procurement, with no set-aside designation indicated. The solicitation is managed through the DIBBS system under contract number SPE7L126D63ET, and all work must comply with federal contracting guidelines governing defense subcontracting.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Rubber or Elastomeric Component SupplyThe contract pertains to the supply of rubber or elastomeric components, specifically rubber seals, gaskets, or flexible mounts designed for use in splash guard assemblies, as defined by technical drawing NR 16236 2540V0744. These components are critical for ensuring proper sealing and vibration dampening in military or defense-related equipment, and the work falls under the NAICS code 326299 for other rubber product manufacturing. The contract is classified as a subcontract and was posted on July 31, 2026, indicating it is part of a broader procurement effort managed by the Defense Logistics Agency under the Department of Defense. The place of performance and point of contact information are not specified, and no set-aside designation is indicated, meaning the award is open to all qualified vendors without socioeconomic preferences. The award is accessible via the DIBBS system under contract number SPE7L126D63ET.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Manufacture of Vehicular Splash GuardsThe contract entails the full production of vehicular splash guards according to military drawing NR 16236 2540V0744, Revision D, requiring end-to-end manufacturing from material sourcing and fabrication to rigorous quality control and adherence to defense specifications. All work must comply with applicable military and defense standards to ensure performance, durability, and interoperability within military vehicle systems, with an emphasis on consistent traceability and compliance throughout the production lifecycle. This is a subcontract under the auspices of the Defense Logistics Agency, part of the Department of Defense, and is classified under NAICS code 332322 for forging and stamping operations. The contract was posted on July 31, 2026, and performance is expected to meet the exacting standards of the DoD supply chain, though specific delivery locations and point of contact details are not provided. The award is managed through the DIBBS system with the contract identification SPE7L126D63ET.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Solicitation # SPE8E6-26-T-3551

The contract pertains to the procurement of two ROD, WELDING units identified by NSN 3439-01-696-3835 under solicitation number SPE8E6-26-T-3551, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 30, 2026, with a response deadline set for July 13, 2026, indicating a two-week window for potential vendors to submit bids. The requirement is classified as a federal procurement with no specific set-aside designation, and the place of performance and office address details are not provided, though the contracting entity is based in the United States. All correspondence and submissions must be coordinated through the designated DIBBS platform linked in the contract data.

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2104

The contract pertains to the procurement of 12-volt lead acid storage batteries, specifically the Power-Sonic Corporation model PG-12V35FR, with a total quantity of 90 units distributed across multiple Navy vessels. These batteries are commercial off-the-shelf items with a mandatory Type I shelf life of 12 months, non-extendable, and must be supplied with two bolts and two washers for terminal cable attachment. Strict compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements is enforced, including the special marking code 32 to indicate shelf life classification. All shipments must adhere to DLA packaging and palletization rules, with hazardous materials handling governed by IP025, and mercury or mercury compounds are prohibited except where functionally necessary and explicitly authorized. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise specified. The contract uses a firm fixed price with zero quantity variance, origin inspection and acceptance, and FOB origin terms. Delivery must occur within 60 days of award, and all items must be shipped via traceable freight using VSM, explicitly forbidding parcel post. Each shipment is directed to specific Navy vessel addresses using RDD codes, with transportation governed by DLAD procedural notes, and delivery timelines are individually assigned, ranging from March to June 2026.

Battery Manufacturing

POSTED

DEADLINE

CRYSTAL UNIT, QUARTZ

Solicitation # SPE7M5-26-Q-0812

A crystal unit, quartz with NSN 5955-00-831-6446 is being solicited under contract number SPE7M5-26-Q-0812 by the Defense Logistics Agency on behalf of the Department of Defense. The request is for a single unit with purchase request number 7017418127, and the solicitation was posted on July 31, 2026, with a response deadline of August 7, 2026. This is a federal procurement action with no set-aside classification specified, indicating it is open to all qualified vendors. The place of performance and office address details are not provided, but the contract is managed within the U.S. federal procurement system. Interested parties must submit responses prior to the deadline via the official DIBBS platform through the provided link.

Other Electronic Component Manufacturing

POSTED

DEADLINE

AMPLIFIER, RADIO FRE

Solicitation # SPE7M5-26-Q-0766

The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for 41 units of an amplifier, radio frequency, identified by NSN 5996-01-390-3676, under purchase request 7017384568. The solicitation, numbered SPE7M5-26-Q-0766, was posted on July 31, 2026, with a response deadline of August 10, 2026. The contract is open to federal suppliers and does not specify a set-aside preference or NAICS code. Performance location and point of contact details are not provided, but the solicitation is administered through the DLA’s DIBBS platform, and all submissions must be made via the official link provided. The requirement is for a critical radio frequency component used in defense systems, and timely response is essential to meet operational needs.

Other Electronic Component Manufacturing

POSTED

DEADLINE

POST, FENCE, METAL

Solicitation # SPE8E6-26-T-3754

The contract involves the procurement of 92 units of zinc-coated steel pipe fence posts, each measuring 4.0 inches outside diameter and 13.0 feet overall length, with a weight of 9.11 pounds per foot, intended for use as gate posts in chain link fencing systems. The product is identified by NSN 5660-01-015-9800 and must conform to Federal Specification RR-F-191K Revision K dated February 13, 2023, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting provisions in other standards. Packaging must adhere to ASTM D3951 and fully comply with RP001, DLA’s Packaging Requirements for Procurement, including palletization, while labeling and marking must strictly follow MIL-STD-129, incorporating barcodes and unit of issue data as specified. The items are to be delivered FOB origin with a strict delivery window of five days to Sweihan Air Base, AE, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The total contract value is $8,464.00 at a unit price of $92.00 per unit, with delivery required no later than July 17, 2026. All submissions must be made through the DIBBS portal by the proposal deadline, and invoicing is mandatory via Wide Area WorkFlow with electronic payment instructions governed by DFARS clauses. The contract incorporates multiple FAR and DFARS clauses related to employment equity, trafficking in persons, sustainable products, hazardous material labeling, cybersecurity, subcontracting, and maritime transport, including a strict requirement that sea shipments must use U.S.-flag vessels with 45-day advance notice for waivers. Compliance with safety data sheet requirements and hazardous material declarations is mandatory, and all subcontractors must flow down applicable clauses. Offerors must provide their Unique Entity ID and CAGE code and make accurate socioeconomic representations. Deviations from standard clauses are permitted under specific government-issued deviation numbers, and the contractor is responsible for ensuring all material, packaging, and shipping documentation meets federal and agency standards without exception.

Rolled Steel Shape Manufacturing

POSTED

DEADLINE

POWER SUPPLY ASSEMBLY

Solicitation # SPE7L7-26-T-4377

The contract involves the procurement of a single Power Supply Assembly, identified by NSN 6130-01-476-2036, under solicitation SPE7L7-26-T-4377 issued by the Defense Logistics Agency. Delivery is required within 20 days after order placement to the destination address associated with USS PATRIOT MCM 7 at FPO AP 96675, with FOB DESTINATION terms applying. The contractor, K D K ELECTRONICS, INC., must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements and governed by MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, labeling, and barcoding, including UCC/ITF-14 and Data Matrix symbols. Zero tolerance is enforced for quantity variance, and all hardware must be free of intentional mercury or mercury compounds, with limited exceptions for specific functional applications compliant with NAVSEA 5100-003D. Cyberspace requirements mandate CMMC Level 2 self-assessment and full compliance with the NIST SP 800-171 DOD Assessment Requirements and DFARS 252.204-7012 for safeguarding covered defense information, alongside the Basic Safeguarding of Covered Contractor Information Systems clause. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero acceptance criteria unless otherwise specified. The contract includes clauses requiring adherence to environmental prohibitions such as the elimination of hexavalent chromium and proper handling of hazardous materials, with mandatory submission of Safety Data Sheets prior to award. Payment must be processed exclusively through WAWF using approved document types like the Invoice and Receiving Report, and the contractor must maintain an active UEI and CAGE code while certifying its small business status if applicable. All submissions must be made via DIBBS by the deadline of August 5, 2026, with no alternative submission methods permitted.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

DEADLINE