Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Military-Compliant Packaging and Marking Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Defense Logistics Agency involves providing specialized packaging, labeling, and marking services for 84 replacement bushings. The contractor is required to ensure all materials are fully compliant with MIL-STD-129 standards and must specifically designate the items as reworked or replaced to prepare them for delivery to a DLA depot. The project falls under NAICS code 423840 and is managed by the Department of Defense. All deliverables must meet strict military specifications to ensure proper identification and handling during the logistics and delivery process to the designated government facility.

General Info

Contract for MIL-STD-129 compliant packaging and labeling of 84 replacement bushings for DLA.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

423840 - Industrial Supplies Merchant Wholesalers

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A624P6401.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BUSHING, SLEEVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 30

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide MIL-STD-129 compliant packaging, labeling, and marking for 84 replacement bushings, including 'REWORKED/REPLACED' designation and preparation for DLA depot delivery.

Similar Contracts

Same NAICS industry code

Supply of Spacer, Collector (NSN 5365008770039)This subcontract involves the sourcing or fabrication of Spacer, Collector aviation hardware to support prime contractors under DLA Weapons Support supply contracts. The required components must meet the specifications for NSN 5365008770039 and Part Number 6792323, referencing standards from General Motors Corp or Rolls-Royce Corporation. A critical requirement of the agreement is the provision of airworthiness documentation and Critical Application Item certification to ensure safety and compliance. Managed by the Department of Defense under the DLA Weapons Support Aviation Supply Chain ESOC Buys, the contract falls under NAICS code 423840. The physical components are to be delivered directly to Tainan Branch Warehouse No. 859-1 located in Tainan City, Taiwan. The solicitation was posted on October 27, 2026, with a response deadline of November 4, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

Hull Drain Poppet Valve Assembly SupplierThis subcontract involves the procurement or manufacture of one Hull Drain Poppet Valve Assembly to support DLA Weapons Support Land Supply Chain contracts. The required parts must match NSN 2590-01-599-4474, specifically referencing part numbers 34580JB from Stanadyne Corporation or 32/926087 from J.C. Bamford Excavators Limited. All deliverables must comply with the DLA Master List of Technical and Quality Requirements and follow MIL-STD-129 packaging standards, with delivery terms set as FOB Destination. The opportunity is managed under NAICS code 423840 for the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at Fort Bragg, ZIP code 28310.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Supply of Aircraft Solenoid Valves (P/N 4324106-1)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

Supply of Turnlock Fasteners (P/N 26S13-A-22)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of 69 certified turnlock fastener studs, part number 26S13-A-22. These components are designated as Critical Application Items and are intended for prime contractors fulfilling DLA supply contracts. The agreement is a total small business set-aside under NAICS code 423840, with delivery terms established as FOB Origin. Strict adherence to military standards is required for the execution of this contract, including packaging per MIL-STD-2073-1E and RP001, marking per MIL-STD-129, and sampling per MIL-STD-1916 or ASQ H1331. Additionally, the contract explicitly prohibits the use of additive manufacturing in the production of these fasteners.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Supply of Hamilton Sundstrand Weights (NSN 6115-01-503-8401)This subcontract involves the supply of 77 Hamilton Sundstrand aerospace weights, part number 968C593-4 and NSN 6115-01-503-8401, to support DLA Weapons Support ASC contracts. The components must adhere to strict quality standards, specifically MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, and must be delivered as warranted aerospace components. The contractor is responsible for packaging and marking the shipment in accordance with MIL-STD-129, MIL-STD-2073-1E, and RP001. All units must be delivered via traceable means to Kadena Air Base in Japan. The procurement falls under NAICS code 423840 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Supplier of MLG Strut Seal Replacement KitsThis subcontract, issued by the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt, requires the supply of 17 MLG Strut seal replacement kits under NSN 5330-00-492-6735. The contractor is responsible for assembling the components into kits, providing protective cushioning, and including detailed contents lists. Due to the nature of the parts, the contractor must manage items designated as Critical Application and ensure full compliance with 29 CFR 1910.1200 regarding hazardous materials. The opportunity is a Total Small Business Set-Aside under NAICS code 423840, with performance taking place in Tracy, California. Interested parties must respond by November 9, 2026. The final deliverable consists of 17 boxed and cushioned seal replacement kits intended for prime contractors working on aircraft maintenance projects.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

Lock Adhesive Chemical Sealer SupplierThis subcontract involves the procurement and delivery of 20 bottles of Henkel Loctite 243 lock adhesive chemical sealer, or an approved equivalent under NSN 6850-01-132-9624, to support DLA Weapons Support contracts. The supplier must ensure all products are provided in original manufacturer packaging with a minimum shelf life of 18 months. The selected provider is responsible for strict adherence to hazardous materials shipping regulations per IP025 and must follow marking standards MIL-STD-2073-1E and MIL-STD-129. Additionally, the supplier must provide all necessary Safety Data Sheets and OSHA labels. Performance will take place at FPO 96675-9600 for the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Supply of Headlights (NSN 6220-01-735-8575)This subcontract involves the supply of 20 headlight units, identified by NSN 6220-01-735-8575, to prime contractors supporting DLA Troop Support supply contracts. The work is managed under the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The contractor is responsible for ensuring all units meet strict military and commercial standards, including commercial packaging per ASTM D3951, marking and labeling per MIL-STD-129, and palletization according to RP001 DLA Packaging Requirements. The final deliverable consists of 20 commercially packaged and marked headlights.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

Supply of Nonmetallic Hose (NSN 4720-01-666-5283)This subcontract involves the supply of 10 units of nonmetallic hoses, specifically NSN 4720-01-666-5283, for the DLA Weapons Support Fluid Handling Division. The required hardware must be Parker-Hannifin part EW356NX8000KEA-72 and must be free of Class I ozone-depleting chemicals. All items are to be delivered to Virginia Beach, Virginia, in strict accordance with MIL-STD-2073-1E packaging and MIL-STD-129 marking standards. The contractor is required to maintain compliance with the Buy American Act and all applicable DFARS cybersecurity regulations. This procurement falls under NAICS code 423840 and is managed by the Department of Defense. Interested parties must adhere to the established response deadline of November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

Rigid Shaft Coupling Supplier (Rolls-Royce PN 23092791)This subcontract involves the supply of 13 units of Rigid Shaft Couplings for prime contractors supporting DLA Weapons Support ASC projects. The required components must be authentic OEM Rolls-Royce Corporation part number 23092791, identified by NSN 3010-01-737-7921, and must strictly adhere to the DLA Master List of Technical and Quality Requirements. The supplier is required to maintain a manufacturer inspection system compliant with SAE AS9003 or ISO 9001, with sampling conducted according to MIL-STD-1916 or ASQ H1331. This Department of Defense procurement is managed by the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located in Virginia Beach.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

Supply of Coupling Retainers (NSN 4730009090001)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

Supply of Hose Assembly, Diffu (NSN 4720001044637)This subcontract involves the procurement of 20 units of Hose Assembly, Diffu, identified by NSN 4720001044637, for the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The items must be sourced from approved manufacturers, specifically Honeywell Aerospace, Smiths Tubular Systems, or Eaton Aeroquip. The contractor is responsible for ensuring authenticity verification and adhering to MIL-STD-129 and ASTM D3951 packaging standards. The contract requires strict compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012. Delivery is specified as FOB Destination to Naval Base Rota, Spain. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026, falling under NAICS code 423840.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 19 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 19 hours ago

DEADLINE

HazMat Freight Forwarding and DeliveryThis subcontract for HazMat Freight Forwarding and Delivery involves the transportation of hazardous sealing compound kits for prime contractors supporting Defense Logistics Agency Troop Support supply contracts. The scope of work requires the delivery of 24 kits FOB Destination to Langley Air Force Base in Virginia and Joint Base Elmendorf-Richardson in Alaska. To ensure product integrity, all materials must be transported in refrigerated or climate-controlled vehicles that maintain temperatures below 80 degrees Fahrenheit. The selected provider must possess DOT Hazardous Materials certification and obtain the necessary base access clearances for the specified military installations. All deliveries must be completed within a strict five-day window. This opportunity falls under NAICS code 484220 and is managed through the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Hydraulic Filter Supply (NSN 2910014797830)

Defense Logistics Agency

POSTED

DEADLINE

Supply of Mechanical Guard (DR Type) – Single-Unit Delivery

Defense Logistics Agency

POSTED

DEADLINE

GE Engine Parts Kit Supply

Defense Logistics Agency

POSTED

DEADLINE

Floor Mat Supply (NSN 2540016646821)

Defense Logistics Agency

POSTED

DEADLINE

Supply of Breather Component (NSN: 2815015219933)

Defense Logistics Agency

POSTED

DEADLINE

Supply of Corrosion Preventive Compound to Soto Cano Air Base

Defense Logistics Agency

POSTED

DEADLINE

Supply of Quick Disconnect Caps (NSN: 4730015186260)

Defense Logistics Agency

POSTED

DEADLINE

Supply of Commercial Off-the-Shelf Fluid Filter Element for DLA

Defense Logistics Agency

POSTED

DEADLINE

Filter Element Supply and Fulfillment

Defense Logistics Agency

POSTED

DEADLINE

Commercial Filter-Separator Supply

Defense Logistics Agency

POSTED

DEADLINE

Packaging and Labeling Compliance Services

Defense Logistics Agency

POSTED

DEADLINE

Fluid Filter Element Supply (NSN 4330015302969)

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS