Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging and Preservation

Active

Federal

Response Deadline07/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the packaging and preservation of military hardware in strict accordance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all items are protected against corrosion, contamination, and environmental degradation during storage and transport. Preservation methods must include dry preservation techniques and exclusively use mercury-free materials to comply with environmental and safety regulations. Containerization must meet exacting military specifications for durability, labeling, and stacking, with all components fully documented and traceable through the supply chain. The work is classified as a subcontract under NAICS code 322291 and is being managed by the ASC Commodities Division of the Department of Defense. Performance of this contract is designated to take place at New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the proposal response deadline is set for July 23, 2026, at 5:00 PM Eastern Time. The solicitation was posted on July 20, 2026, indicating a tight three-day window for potential vendors to submit their bids. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors, and the primary focus is on adherence to federal military packaging standards rather than socioeconomic preferences. The complete details and submission requirements can be accessed via the provided DIBBS link.

General Info

Pack and preserve military hardware per MIL-STD-2073-1E and DLA RP001 using mercury-free, dry methods at New Cumberland, PA by July 23, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

322291 - Sanitary Paper Product ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 23

Submission deadline

Response Deadline

07/23/2026, 05:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Packaging and preservation of hardware per MIL-STD-2073-1E and DLA RP001, including dry preservation, mercury-free materials, and compliant containerization.

Similar Contracts

Same NAICS industry code

Specialized Packaging and Crating ServicesPhiladelphia Gas Works has issued a subcontract for specialized packaging, crating, and preservation services tailored to sensitive or large industrial components destined for safe transport to the Richmond Plant. The work requires custom solutions to ensure the integrity of high-value equipment during transit, with adherence to industry standards for protection against environmental factors, physical shock, and corrosion. This contract is open for bids through July 27, 2026, and is classified under NAICS code 322291, which pertains to other paper product manufacturing, suggesting the involvement of engineered packaging materials beyond standard containment. The solicitation does not specify a set-aside status, and while no point of contact or detailed location information is provided, performance is required at the Richmond Plant, with the procuring agency operating out of Pennsylvania. Interested parties must submit proposals prior to the deadline to secure consideration for executing these critical logistics services.

Philadelphia Gas Works

POSTED

DEADLINE

Hazardous Materials Packaging and ComplianceThe contract requires the provision of compliant packaging solutions specifically designed for hazardous medical materials, including silver nitrate and potassium nitrate applicators, ensuring full adherence to federal, military, and international standards for protection against moisture, light, and physical damage during transportation. The packaging must be engineered to maintain the integrity and safety of these sensitive substances throughout the supply chain, accommodating strict regulatory requirements for hazardous material handling and transport. Performance is designated for Groton, Connecticut, with a response deadline of July 27, 2026, and the solicitation is classified as a subcontract under NAICS code 322291, administered by the Department of Defense’s Medical Supply Chain Pharm FSA. All proposals must demonstrate proven capability in meeting the precise environmental and safety benchmarks required for medical hazardous goods, with an emphasis on reliability, regulatory compliance, and logistical durability under operational conditions.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Military Packaging and Preservation ServicesThe contract requires the provision of specialized cold and dry military packaging solutions for sensitive components such as O-rings, ensuring full protection against moisture, grease, and ultraviolet radiation using approved waterproof, greaseproof, and UV-protective materials. The packaging must meet stringent military preservation standards to maintain component integrity during storage and transit under extreme environmental conditions. The work is classified as a subcontract under the NAICS code 322291, issued by the Defense Logistics Agency under the Department of Defense, with the performance scope tied to broader defense logistics operations without a specified geographic restriction. The solicitation was posted in July 2026 and is administered through the DIBBS system under contract number SPE7L126V8602.

Defense Logistics Agency

POSTED

DEADLINE

ESD/EMI-Sensitive Packaging & PreservationThe contract requires the supply of ESD and EMI protective packaging for electronic components, with strict adherence to MIL-STD-2073-1E and MIL-PRF-81705 standards to ensure proper preservation and protection against electrostatic discharge and electromagnetic interference. The packaging must meet all technical and performance requirements outlined in these military specifications to safeguard sensitive electronics during storage, transportation, and handling. This subcontract is targeted for performance at the Columbus location with ZIP code 43213 and is classified under NAICS code 322291, indicating packaging and container manufacturing activities. The solicitation was posted on July 20, 2026, with a response deadline set for July 31, 2026, leaving a limited window for interested parties to submit proposals. The contracting activity falls under the Active Devices Division of the Department of Defense, and the opportunity is open for bidding through the DIBBS platform. No specific set-aside classification is indicated, and while no point of contact details are provided, all submissions must be directed through the official UI link to ensure proper processing and compliance with procurement protocols.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Sustainable Materials and Packaging SupplyThe contract awards the supply of eco-friendly packaging materials specifically designed for aircraft tie-down applications, ensuring compliance with MIL-STD-2073-1E for defense-grade packaging standards and adherence to federal sustainability mandates. The materials must meet rigorous environmental criteria while maintaining the durability, protection, and uniformity required for military logistics operations. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, targets the NAICS code 322291 for other paper product manufacturing, indicating a specialized production focus on sustainable packaging solutions. The award remains active as of July 20, 2026, with performance expected to support defense supply chain logistics across unspecified locations, aligning with broader DoD goals for reducing environmental impact without compromising operational readiness.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Latex-Free Self-Adherent Gauze Bandage RollsThe contract calls for the manufacture and delivery of 2-inch by 10-yard latex-free, non-woven, self-adherent gauze bandage rolls that must comply with DLA medical marking and packaging standards, ensuring full lot traceability and a minimum 36-month shelf life. The product specification emphasizes strict adherence to medical-grade requirements, with no latex content and a non-woven construction that ensures safety and reliability for sensitive users. The bandages must maintain integrity and adhesive performance throughout their shelf life and be labeled and packaged to meet all Department of Defense logistics and identification protocols. The solicitation is issued under the NAICS code 322291 for other textile product mills and is classified as a subcontract with a response deadline of July 27, 2026. The awarding agency is the Medical Supply Chain MD SURG FSF under the Department of Defense, indicating this is part of the military's broader medical procurement infrastructure. Although specific performance location and point of contact details are not provided, all units must be furnished to DLA distribution channels in accordance with federal supply system requirements. Bidders must demonstrate capability to meet traceability, packaging, and shelf-life targets to ensure seamless integration into military medical inventory systems.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Specialized Packaging and Hazard LabelingThe contract requires specialized packaging and hazard labeling services in strict alignment with DFARS 252.223-7001 to meet military transport safety and handling standards. All packaging must be DFARS-compliant, ensuring materials are properly secured, protected, and labeled for safe movement within defense logistics chains. Hazard warning labels must be accurately applied according to federal regulations to clearly communicate risks associated with the contents, enabling proper handling by military and civilian personnel throughout the supply chain. The solicitation is classified as a subcontract under NAICS code 322291 and is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at the location in NEW CUMBERLAND, Pennsylvania, zip code 17070-5002. Interested parties must submit responses by the deadline of July 31, 2026, with no set-aside provisions specified. The opportunity is accessible via the DIBBS portal, and compliance with all labeling and packaging standards is mandatory to fulfill contractual obligations.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Clinical Analyzer Recording Paper (Hematology)The contract calls for the procurement and delivery of four packages, each containing three units of hematology clinical analyzer recording paper, totaling twelve units. The material must strictly comply with Defense Logistics Agency technical specifications, packaging requirements, and labeling standards to ensure compatibility and operational reliability in military medical environments. The effort is classified as a subcontract under NAICS code 322291, indicating it involves other paper product manufacturing, and is managed by the Medical Supply Chain FSH under the Department of Defense. Performance is designated for FPO with a ZIP code of 09587, signaling delivery to a military postal address, likely supporting overseas or deployed medical facilities. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, indicating a tight turnaround for qualified vendors to submit proposals.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Packaging and Preservation Services (Military Standards)The contract requires the packaging and preservation of dental floss to meet military specifications under MIL-STD-2073-1E, ensuring that the product is sealed in unit and shipping containers designed for rigorous protection during transport and storage. This includes strict adherence to military standards for materials, sealing methods, labeling, and environmental resilience to maintain product integrity in demanding operational conditions. All packaging must be capable of withstanding the stresses of military logistics, including extreme temperatures, humidity, vibration, and prolonged storage periods without degradation. This is a subcontract opportunity issued by the Department of Defense under the Medical Supply Chain FSH, with a North American Industry Classification System code of 322291 for other paper product manufacturing. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with no set-aside provisions specified. Performance is expected to support federal defense logistics, though no specific place of performance is indicated. Interested parties must respond through the DIBBS portal using the provided link to submit proposals in compliance with military packaging requirements.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Military-Compliant Packaging and PalletizationThe contract requires specialized packaging and palletizing of adhesive units in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all components are properly preserved, contained, and labeled according to hazardous material regulations. Operations must encompass full lifecycle handling from initial packaging through final palletization, with rigorous adherence to military-grade procedures for protection, durability, and traceability. All work must meet exacting defense logistics requirements for storage, transport, and inspection readiness. Performance is mandated at Fort Irwin, California, with a zip code of 92310-9986, and the work is classified as a subcontract under NAICS code 322291. Respondents must submit proposals by July 27, 2026, following the release date of July 20, 2026. The contract is issued by the Defense Logistics Agency under the Department of Defense, with all documentation and submissions to be processed through the DIBBS platform using solicitation number SPE8ES26T2391. Failure to meet packaging, labeling, or hazardous material compliance standards will result in rejection.

Defense Logistics Agency

POSTED

DEADLINE

MIL-STD-129 and DLA RP001 Compliant Packaging and MarkingThe contract requires precise packaging and marking of finished disk assemblies in full compliance with MIL-STD-129 and DLA RP001 standards, ensuring all items are properly labeled with 2D Data Matrix barcodes for accurate identification and tracking throughout the supply chain. The process includes climate-controlled drying with desiccant to protect components from moisture damage during storage and transit, maintaining product integrity under stringent military specifications. All work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and adherence to these standards is non-negotiable for acceptance. The solicitation, issued under NAICS code 322291, is structured as a subcontract with a response deadline of July 31, 2026, and was posted on July 20, 2026, under the Department of Defense’s Land Supplier Operations Vehicle Support organization.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

ESD/EMI Protective Packaging and PreservationThe contract requires the design and implementation of electrostatic discharge and electromagnetic interference protective packaging using materials qualified under QPL-81705, ensuring compliance with industry-standard safeguards for sensitive electronic components. All packaging must be preserved in accordance with MIL-STD-2073-1E, covering procedures for cleaning, corrosion prevention, wrapping, marking, and storage to maintain item integrity throughout handling and transit. This is a subcontract opportunity under NAICS code 322291, focusing on specialty packaging solutions tailored for defense applications, with performance required at the specified location in New Cumberland, Pennsylvania, under the oversight of the Department of Defense’s Fluid Handling Division. Responses must be submitted by the deadline of July 31, 2026, with no set-aside provisions indicated, making it open to all eligible contractors. The emphasis is on proven material qualification and strict adherence to military preservation standards, requiring bidders to demonstrate technical capability in both packaging design and compliance with documented military specifications. While no point of contact is listed, the official solicitation details can be accessed through the DIBBS portal using the provided link for further submission instructions and requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Cybersecurity Compliance & Incident ReportingThe contract requires full implementation of NIST SP 800-171 cybersecurity controls to safeguard controlled unclassified information within the contractor’s systems, alongside the development of a comprehensive System Security Plan that documents how these controls are applied and maintained. The contractor must establish processes to ensure continuous compliance with these standards and be prepared to report any cyber incident affecting covered defense information within 72 hours, in strict accordance with DFARS 252.204-7012 requirements. This effort is critical for maintaining the integrity and security of sensitive government data handled under this subcontract. This subcontract is issued under the Department of Defense by the ASC Commodities Division, with the NAICS code 541512 indicating it pertains to computer systems design services. While no set-aside type or specific point of contact is provided, the solicitation remains open for responses until August 4, 2026, with a posting date of July 21, 2026. The place of performance has not been specified, and bidders must review the full solicitation through the provided DIBBS link to ensure alignment with all technical, administrative, and reporting obligations tied to this cybersecurity compliance effort.

Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

Quality Inspection & Sampling ServicesThe contract requires the provision of quality inspection and sampling services adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans with AQL criteria, where zero nonconformances are mandatory for acceptance. Inspections must be conducted with precision to ensure all delivered products meet the defined quality standards without exception, reflecting a zero-tolerance policy for defects. The work is classified as a subcontract under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and the solicitation posted on July 21, 2026. The place of performance and point of contact details are not specified, suggesting the work may be performed at multiple locations or as directed by the contracting office. Interested parties must review the full solicitation through the provided DIBBS link to understand specific deliverables, reporting requirements, and compliance obligations beyond the sampling standards outlined.

Engineering Services

POSTED

about 4 hours ago

DEADLINE

Military-Compliant Packaging, Labeling & Preservation ServicesThe contract requires the provision of military-compliant packaging, labeling, and preservation services for defense shipments, adhering strictly to MIL-STD-129 and DLA RP001 standards. All materials and processes must ensure corrosion protection and full regulatory compliance for use in military logistics, with an emphasis on durability, traceability, and environmental resilience under operational conditions. The work involves end-to-end preparation of items for shipment, including proper identification, marking, and preservation techniques to safeguard equipment and supplies from degradation during storage and transit. This subcontract opportunity is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and a posting date of July 21, 2026. The NAICS code 332999 indicates it falls under other miscellaneous fabricated metal product manufacturing, suggesting the work may involve custom packaging solutions or specialized container fabrication. The place of performance and specific delivery locations are not detailed, but fulfillment is expected to support military supply chain operations globally. Interested parties must submit proposals before the deadline to be considered for award under this unspecified set-aside solicitation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

Precision Pressure Gauge Manufacturing & SupplyThe contract seeks the manufacture or supply of a military-specification pressure gauge identified by NSN 6685-01-131-8110, requiring full compliance with established material and performance standards for military applications. All units must be delivered in original, corrosion-free packaging to ensure integrity during transport and storage, and must meet all technical and quality requirements dictated by defense specifications. The solicitation is issued as a subcontract under NAICS code 334519 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by August 4, 2026. The place of performance and point of contact details are not specified, but the work is expected to align with DoD procurement protocols.

Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

GAGE, PRESSURE, DIAL INDICATINGThe contract pertains to the procurement of a single dial pressure gauge with NSN 6685-01-131-8110 under solicitation SPE4A6-26-R-XB17, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application item manufactured by Ashcroft Inc with part number EA24-3PHP-EWB0 and must be delivered in one unit at a firm fixed price with no variance allowed in quantity. Delivery is required 224 days after the award date, with inspection and acceptance occurring at the destination. Packaging must strictly conform to MIL-STD-2073-1E and MIL-PRF-23199 standards, including marking, labeling, and bar coding per MIL-STD-129, and palletization must follow DLA’s RP001 packaging requirements. The contract incorporates all technical and quality requirements from the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling for quality assurance must align with MIL-STD-1916 or ASQ H1331, Table 1, with attributes assigned specific verification levels or AQLs; zero non-conformances are required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited in materials, packing, preservation, or marking except for limited authorized uses such as batteries, fluorescent lamps, or specified instruments, which must include secondary containment and shock-proof design. Hazardous materials handling, packaging, and shipping must adhere to IP025 and IP056 provisions, ensuring no mercury is present in any packaging elements. All logistics and transportation directives are governed by DLAD procedural notes C19 and C20.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

Transportation and Delivery Logistics (Including Sea Transport)The contract encompasses the comprehensive arrangement and execution of transportation logistics, with a specific focus on sea transport, to support Department of Defense operations. All activities must strictly comply with DFARS 252.247-7023, ensuring adherence to defense-related transportation regulations, and must utilize the Wide Area WorkFlow system for invoicing to meet federal financial reporting standards. The solicitation is a subcontract under a Total Small Business Set-Aside designation, restricting eligibility solely to small businesses as defined by the Small Business Administration, and is classified under NAICS code 483111 for water transportation of crude oil or petroleum products. Performance is designated for Cherry Point with a zip code of 28533-5040, indicating the primary operational location for delivery and logistics activities. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026, and is managed by the ASC Commodities Division under the Department of Defense.

Deep Sea Freight Transportation

POSTED

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires the identification, documentation, and timely submission of Safety Data Sheets for all hazardous materials used in packaging or preservation processes, ensuring full compliance with OSHA’s Hazard Communication Standard and Federal Standard No. 313. All SDS must be accurate, up to date, and formatted according to regulatory requirements to support workplace safety and regulatory audits. The work is tied to hazardous material handling within the Department of Defense’s ASC Commodities Division, with performance specifically located at Cherry Point, North Carolina, 28533-5040. This is a Small Business Set-Aside subcontract under NAICS code 541620, restricted to small businesses as defined by the SBA, and is open for response until July 28, 2026. The solicitation is managed through the DLA DIBBS system and does not specify a point of contact, requiring potential offerors to review the complete posting on the provided DIBBS link for full submission requirements. Compliance with federal safety standards is mandatory, and failure to properly document and submit SDS could result in non-compliance and contract termination.

Environmental Consulting Services

POSTED

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services for bearings, strictly adhering to the standards outlined in MIL-DTL-197M, MIL-STD-2073-1E, and MIL-STD-129. All work must include thorough quality verification procedures and comprehensive recordkeeping to ensure full compliance with Department of Defense requirements. The services are intended for delivery to the specified place of performance in Cherry Point, North Carolina, with all packaging and labeling executed to meet rigorous military specifications for durability, traceability, and environmental protection throughout the supply chain. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility exclusively to small businesses certified by the SBA. The North American Industry Classification System code 493190 applies, indicating the work falls under other warehousing and storage services. The opportunity was posted on July 20, 2026, with a firm response deadline of July 28, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Interested parties must submit proposals through the designated DIBBS portal by the specified deadline to be considered for award.

Other Warehousing and Storage

POSTED

DEADLINE

Cylindrical Roller Bearing Supply (Source-Controlled Manufacturer)The contract mandates the supply of 55 units of a cylindrical roller bearing identified by Part No. 580274-1 and NSN 3110010087937, manufactured and tested exclusively by an approved source under proprietary limited rights data and stringent military specifications. The product must comply with all required technical and quality standards as defined by defense protocols, ensuring reliability and performance in critical military applications. Production and delivery are subject to strict sourcing controls, requiring adherence to certified manufacturing processes and testing procedures validated by authorized entities. This is a subcontract under a Total Small Business Set-Aside designation, restricted to small businesses as defined by the SBA and governed by FAR 19.5. The North American Industry Classification System code 332991 applies, indicating the work falls under other fabricated metal product manufacturing. The contract was posted on July 20, 2026, with responses due by July 28, 2026, and the place of performance is designated as Cherry Point, North Carolina, with a zip code of 28533-5040. The awarding agency is the ASC Commodities Division under the Department of Defense, and the procurement is accessible via the DIBBS system for interested small business vendors.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Government Inspection and Acceptance SupportThe contract requires comprehensive support for government inspection and acceptance activities at the point of origin, strictly adhering to MIL-STD-1916 and ASQ Z1.4 quality standards. The contractor must ensure zero non-conformances throughout the inspection process, maintaining rigorous quality control measures and detailed documentation to demonstrate compliance. All quality records must be systematically maintained, readily accessible, and aligned with Department of Defense expectations for traceability and audit readiness. Coordination with Defense Logistics Agency inspectors on-site is mandatory, requiring seamless communication, timely responses, and full cooperation during all phases of inspection and acceptance. This is a subcontract under the Department of Defense’s ASC Commodities Division, categorized under NAICS code 811212, indicating services related to institutional and commercial laundry and dry cleaning, though the specific nature of the items being inspected is not detailed. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026. The place of performance and point of contact information are unspecified, and the work is expected to be conducted at the supplier’s origin location under the direct oversight of DLA personnel. All activities must be executed with the highest level of precision and accountability to meet federal quality and acceptance requirements without deviation.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Hazard Communication and Labeling ComplianceThe contract requires the preparation and submission of hazard warning labels in full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001, ensuring that all hazardous or regulated materials are properly labeled and documented. This includes the development of accurate and up-to-date Safety Data Sheets (SDS) to meet federal regulatory requirements for chemical safety and information dissemination across the defense supply chain. The work must align with established government standards for hazard classification, labeling elements, and SDS formatting to support safe handling, storage, and transportation of controlled substances. This subcontract is issued under the NAICS code 541690, which pertains to other scientific and technical consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with a firm response deadline of July 28, 2026. Performance is expected to support military logistics and supply operations, though specific location details are not provided. Participation requires demonstrated expertise in regulatory compliance, hazardous materials management, and the ability to deliver documentation that meets stringent DOD and federal safety mandates without deviation.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Military Shipment Marking and Bar-CodingThe contract requires the application of exterior container markings and bar codes in strict accordance with MIL-STD-129, ensuring all label formats, content, and placement meet military standards for shipment identification. Additionally, where applicable, permanent item identification must be implemented following MIL-STD-130N guidelines to ensure traceability and compliance across the supply chain. This effort is critical for accurate logistics handling, inventory control, and operational readiness within Department of Defense operations. The solicitation is structured as a subcontract under NAICS code 541990, open for response until July 28, 2026, and is managed by the ASC Commodities Division of the Department of Defense. There is no set-aside designation specified, and the place of performance details are not provided, though performance is expected to align with DoD logistics requirements. Interested parties must access the full solicitation through the DIBBS portal to understand submission protocols and technical expectations, ensuring all marking and identification work is completed to federal military specifications without deviation.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE