Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military-Compliant Packaging and Preservation Services

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application of preservation, packaging, and marking standards in full compliance with MIL-STD-2073-1 and MIL-STD-129 to ensure parts kits remain ready for long-term storage and secure transport under military specifications. The work involves precise adherence to defense-grade protocols for protecting components from environmental degradation, ensuring correct labeling, and maintaining traceability throughout the supply chain. All activities must align with the rigorous requirements set forth by these military standards to guarantee interoperability, readiness, and operational effectiveness when deployed. This subcontract is issued under the NAICS code 312230 and is managed by the Maritime Supply Chain within the Department of Defense, with performance required at a designated location in San Diego, ZIP code 92136-3581. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. All participating parties must demonstrate capability to meet defense packaging and preservation benchmarks, with attention to documentation, quality control, and delivery timelines essential for mission success. The contract does not specify a set-aside type and is accessible via the DIBBS platform for bid submission.

General Info

Apply MIL-STD-2073-1 and MIL-STD-129 for defense-grade packaging, marking, and preservation in San Diego by August 13, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

312230 - Tobacco ManufacturingView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Application of preservation, packaging, and marking standards to ensure long-term storage and transport readiness of parts kits in accordance with MIL-STD-2073-1 and MIL-STD-129.

Similar Contracts

Same NAICS industry code

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, cleaning, drying, and sealing services for defense hardware in full compliance with MIL-STD-2073-1E and RP001 standards. All activities must ensure the long-term integrity and readiness of military equipment during storage and transit, with strict adherence to prescribed procedures for environmental protection, corrosion prevention, and contamination control. Comprehensive Final Acceptance Test documentation must be delivered to verify conformance to contractual requirements and military specifications. Work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a response deadline of August 10, 2026. This is a subcontract opportunity issued under the Department of Defense’s ASC Commodities Division, classified under NAICS code 312230. The requirement is part of a broader effort to maintain defense supply chain readiness through standardized, validated packaging and preservation practices, and all vendors must demonstrate proven ability to meet stringent military logistics and documentation protocols.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-STD-129 Packaging, Labeling, and Marking ServicesThe contract requires full compliance with MIL-STD-129 standards for the packaging, labeling, and marking of military shipments destined for naval vessels. This includes implementing serialization, barcoding, and comprehensive traceability documentation to ensure accurate identification, tracking, and handling of all items throughout the supply chain. All packaging and labeling must meet precise military specifications for durability, legibility, and compatibility with DoD logistics systems, with particular attention to uniformity and regulatory fidelity across all shipments. The work is scoped as a subcontract under the Defense Logistics Agency, with performance centered at FPO, zip code 96643, indicating delivery to naval assets operating in remote or maritime locations. The solicitation, classified under NAICS code 312230, is open for responses until August 13, 2026, and is part of the Department of Defense's broader effort to maintain rigorous logistical accountability in fleet support operations. Successful offerors must demonstrate proven capability in meeting stringent military packaging and marking requirements, with an emphasis on end-to-end traceability and system interoperability.

Defense Logistics Agency

POSTED

DEADLINE

Military-Compliant Packaging and Unitization ServicesThe contract requires the preparation, packaging, and unitization of government-supplied materiel using protective materials and methods that fully comply with military standards to ensure safe handling, storage, and transportation. All activities must adhere to established military specifications to maintain the integrity and readiness of the supplies through every phase of logistics. The work involves precise handling procedures to safeguard materiel against environmental and physical damage during transit and long-term storage. This is a subcontract opportunity under the NAICS code 312230, issued by the Department of Defense’s Land Supply Chain organization. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026. The place of performance is not specified in detail, and there is no set-aside designation indicated. Interested parties must submit their proposals through the official DIBBS portal before the deadline to be considered for award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

DoD Packaging and Marking ServicesThe contract requires the provision of packaging and marking services that fully comply with MIL-STD-2073-1E standards for military materiel, ensuring durability, protection, and environmental resistance throughout the supply chain. It mandates precise application of MIL-STD-129 labeling with 2D barcode technology to enable seamless, automated tracking by the Department of Defense, critical for logistics visibility and inventory management. All work must meet exacting military specifications to support operational readiness and accountability. This subcontract opportunity is issued by the Active Devices Division under the Department of Defense, with performance required in Tracy, California, at the specified ZIP code 95304-5000. The North American Industry Classification System code is 312230, indicating classification under manufacturing related to packaging. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and is accessible through the DIBBS system. Failure to meet compliance with either packaging or marking standards will result in rejection, and adherence to both standards is non-negotiable for contract award.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires comprehensive packaging, preservation, and labeling of electrical wire in strict compliance with MIL-STD-2073-1E, MIL-DTL-12000, and DLA RP001 standards, ensuring military-grade durability, environmental protection, and traceability throughout the supply chain. All work must meet exacting defense specifications for material handling, corrosion inhibition, labeling accuracy, and documentation to maintain readiness and interoperability across military operations. The project is classified as a subcontract under NAICS code 312230, indicating involvement in wire and cable manufacturing support services tailored to federal mandates. Performance is designated for Jacksonville, North Carolina, with a submission deadline of August 13, 2026, and the solicitation was posted on August 2, 2026. The contract is administered by the Maritime Supply Chain ESOC Buys division within the Department of Defense, underscoring its importance to naval and maritime logistics. While no set-aside status is specified, bidders must be prepared to demonstrate capability in military packaging systems, quality control procedures, and adherence to DLA directives to ensure seamless integration into the defense supply network. The contract’s success hinges on precise execution of technical requirements and compliance with all regulatory documentation protocols.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, and palletization services for power distribution panels in full compliance with Department of Defense and military standards, ensuring readiness for secure and durable transport under demanding operational conditions. All work must adhere to DLA specifications to maintain the integrity of the equipment during storage and transit, with particular attention to environmental protection, corrosion prevention, and secure mechanical containment. The task is scoped exclusively for small businesses under a Total Small Business Set-Aside, as defined by the SBA and FAR 19.5, with the NAICS code 312230 indicating classification within the beverage and tobacco product manufacturing sector, though the actual work pertains to defense-related packaging and logistics. The offeror must perform all activities with the place of performance listed as FPO 96666, indicating delivery to a military postal location typically associated with overseas or naval operations. The solicitation is open for response until August 13, 2026, with the opportunity published on August 2, 2026, under the auspices of the Maritime Supply Chain ESOC Buys office within the Department of Defense. While no point of contact information is provided, interested parties are expected to engage through the official DIBBS portal using the specified RFQ link for details, submissions, and further procedural guidance. Compliance with all military packaging protocols and timely delivery within the given deadline are non-negotiable requirements for award consideration.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of finished bushings in strict accordance with MIL-STD-2073-1E standards, ensuring full compliance with Department of Defense requirements for long-term storage and transport. This includes the application of corrosion inhibition treatments, sealed wrapping using approved materials, and preparation of containers suitable for military shipment, with all procedures designed to protect the integrity of the components under varying environmental conditions. The work must be executed to meet the rigorous specifications of the defense supply chain, with no deviation from the mandated preservation and packaging protocols. This is a subcontract opportunity issued by the ASC Commodities Division under the Department of Defense, with a NAICS code of 312230 indicating it relates to beverage and tobacco product manufacturing, though the actual work focuses on defense-related packaging services. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The place of performance and point of contact details are not specified, but all work must align with the DoD’s logistical and preservation standards as outlined in the referenced military standard. The full terms and requirements can be accessed via the provided DIBBS link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Defense-Grade Packaging and Preservation ServicesThis contract requires the provision of defense-grade packaging, preservation, and containerization services for valve components and other defense supplies in full compliance with MIL-STD-2073-1E standards, specifically using the clean and dry preservation method to ensure long-term integrity and readiness. The specified packaging configuration must utilize designated unit and intermediate containers labeled D3 and E5, along with Pack Code U, to meet standardized military logistics and handling requirements. All materials and procedures must maintain strict environmental controls to prevent contamination, moisture damage, or degradation during storage and transit. The work is to be performed at the New Cumberland facility with a ZIP code of 17070-5002, and responses are due by August 13, 2026, under a subcontract structure within the NAICS code 312230 for beverage and tobacco product manufacturing, which reflects the classification used for defense packaging subcontracting activities. The contracting authority is the Department of Defense through its DDSP New Cumberland Facility.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Specialized Packaging and PreservationThe contract requires specialized military-grade packaging and preservation of switchplate covers in strict accordance with MIL-STD-2073-1E and DLA RP001 standards, ensuring maximum protection against environmental degradation during storage and transit. All materials and methods must meet exacting defense specifications, including appropriate corrosion inhibitors, desiccants, barrier films, and sealing techniques to maintain operational readiness over extended periods. The work must be performed using certified processes validated for military use, with documentation to verify compliance at every stage of packaging. This is a subcontract opportunity under the Department of Defense, managed by the Maritime Supply Chain, with a performance location designated as FPO 96677. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. The North American Industry Classification System code 312230 indicates the work falls within the beverage and tobacco product manufacturing sector, though the actual deliverable is a defense-related electronic component housing. Contractors must demonstrate capability to execute defense-grade packaging protocols without deviation and be prepared for rigorous inspection and audit readiness throughout the contract lifecycle.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Military-Grade Packaging and PreservationThe contract requires the packaging and preservation of solenoids in strict accordance with MIL-STD-2073-1E, specifically employing cold/dry preservation Method 41 to ensure long-term protection against environmental degradation. All units must be enclosed in designated military-grade containers identified as D3 and D0, which are engineered to maintain integrity during storage and transit under challenging conditions. An Open Pack Indication (OPI M) must be implemented to provide clear visual evidence if the packaging has been opened or compromised at any point in the supply chain. The work is classified as a subcontract under NAICS code 312230 and is being managed by the Department of Defense through its Maritime Supply Chain organization. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 2, 2026, and bids must be submitted by August 13, 2026, with no set-aside provisions indicated.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Defense-Compliant Packaging and Preservation ServicesThe contract requires the provision of defense-compliant packaging and preservation services for cable assemblies, adhering strictly to MIL-STD-2073-1E standards. Packaging must utilize CLNG/DRY Method 10 for preservation, ensuring long-term protection against corrosion and environmental degradation, and must be enclosed in fiberboard boxes designated as E5. All units must be accurately marked and barcoded in accordance with MIL-STD-129 to ensure proper identification, tracking, and logistics handling throughout the supply chain. The work is intended for delivery to a designated performance location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. This subcontract is issued under the NAICS code 312230, indicating classification within the beverage and tobacco product manufacturing sector, though the actual scope relates to military packaging services. It is managed by the ASC Commodities Division of the Department of Defense, and responses are due by August 10, 2026. The solicitation is publicly accessible through the DIBBS system, and successful offerors will be expected to meet all military specifications without deviation, ensuring readiness and interoperability within federal defense logistics networks.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military Packaging, Marking & Bar-Coding ServicesThe contract seeks qualified vendors to deliver comprehensive packaging, preservation, and labeling services in strict accordance with MIL-STD-2073-1E, MIL-DTL-12000, and MIL-STD-129 standards, ensuring full compliance with Department of Defense requirements for military materiel handling. Key deliverables include the generation of barcodes, precise labeling, and DLA-compliant palletization to facilitate efficient logistics and inventory management across the supply chain. All work must be performed to meet rigid military specifications for durability, traceability, and environmental protection of sensitive equipment and components. Performance is required at Tinker Air Force Base, Oklahoma, with a response deadline of August 13, 2026, and the opportunity is classified as a subcontract under NAICS code 312230 for beverage and tobacco product manufacturing, reflecting the specialized nature of the packaging services involved. The contract is issued by the Maritime Supply Chain office under the Department of Defense, indicating its critical role in supporting defense logistics operations. Interested parties must submit proposals through the DIBBS platform by the specified deadline to be considered for award.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

ENCODER, SHAFT ANGLE

Solicitation # SPE7M1-26-T-246P

The contract pertains to the procurement of seven shaft angle encoders identified by NSN 5990-01-672-5924 and part number F181869-20 from LAKE SHORE SYSTEMS, INC. Delivery is required FOB origin within 264 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania. All items must be packaged in compliance with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence and dictate final compliance standards. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement. The unit of issue is each, with a total contract value of $49.00 at $7.00 per unit. The required ship date and original delivery date are both May 6, 2027. The contract is governed under solicitation SPE7M1-26-T-246P, issued under the NAICS code 335312 by the Department of Defense's Maritime Supply Chain. Transportation and freight shipping instructions reference specific DLA procedural notes C19 and C20, and all documentation must align with the DLA’s authorized unit of issue standards. The point of contact for the solicitation is Joseph Madjecki, reachable via phone and email provided.

Motor and Generator Manufacturing

POSTED

about 12 hours ago

DEADLINE

RESISTOR NETWORK, FI

Solicitation # SPE7M1-26-T-246Q

The contract specifies the procurement of a fixed film resistor network with NSN 5905-01-127-7563 and part number M8340101M1801JA, governed by military specification MIL-PRF-83401H(4) and its Supplement 1, both dated May 29, 2024. The item is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, incorporating referenced technical and quality standards via R and I numbers. The use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and testing processes unless expressly approved in writing by the Contracting Officer, and this restriction overrides any conflicting specification requirements. The resistor must meet electrostatic discharge and electromagnetic interference protection standards per MIL-PRF-81705, requiring certified barrier packaging materials sourced from QPL-81705 approved manufacturers. Additional packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific controls for lead finish identification per IPC/JEDEC J-STD-609, mandating proper labeling on each unit package. ESD and physical protection for leads and terminals is required through cushioning and container design, even when not explicitly outlined in packaging codes. The contract calls for delivery of 10 units FOB origin within 80 days, with inspection and acceptance occurring at destination. No quantity variance is permitted. Packaging must include DOD-approved ESD/EMI materials, and all items must be handled and packaged at approved protective workstations. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE7M1-26-T-246Q, with a response deadline of August 14, 2026, and an original required delivery date of December 25, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 12 hours ago

DEADLINE

RELAY, ELECTROMAGNET

Solicitation # SPE7M1-26-T-246T

The contract pertains to the procurement of three electromagnetic relays with NSN 5945-01-088-1822 under solicitation SPE7M1-26-T-246T, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency. Delivery is required within 20 days of award, and the solicitation closes on August 14, 2026. The item is subject to stringent export controls under either ITAR or EAR, prohibiting any transfer, including disclosure to foreign persons within or outside the U.S., without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this technical data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on DOD export-controlled data handling, and approved questionnaire submissions are permitted access. The contracting entity must also maintain CMMC Level 2 certification through a certified third-party assessment organization and comply with all DLA packaging and cybersecurity requirements. Point of contact for inquiries is Corin Loper, and the solicitation is available via the DIBBS portal.

Relay and Industrial Control Manufacturing

POSTED

about 12 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7M1-26-Q-1324

The contract pertains to the procurement of an Axle, Shouldered, identified by NSN 3040-00-479-3932 and part number 416540-1, classified as a Critical Application Item for Aircraft Launch and Recovery Equipment (ALRE). It requires strict adherence to serialization and traceability protocols, with each part and its packaging must be marked with the part number, serial number, contractor CAGE code, and actual manufacturer CAGE code, in compliance with MIL-STD-129. Re-branding that obscures original OEM markings is prohibited, and all serialized or lot-numbered components, including scrapped material, must be fully accounted for. Source approval is mandatory and must be granted by the Naval Air Warfare Center Aircraft Division at Lakehurst, with offerors required to submit evidence of approval or meet criteria outlined in the NAVICP Source Approval Information Brochure. Only specifically approved manufacturers are eligible, including AERO COMPONENTS, LLC, RELIABLE MANUFACTURING COMPANY, and others listed. The contract enforces rigorous quality and documentation controls under SAE AS9100 standards, requiring Non-Destructive Testing (NDT) accreditation, Quality Conformance Inspection, and Inspection and Acceptance at Origin. The Certificate of Quality Compliance and other CDRLs such as the First Article Testing Report and Production Test and Inspection Report are mandatory, and technical data must align with the referenced TDP rev A drawings and quality assurance provisions. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, and all attributes are assigned specific verification levels or AQLs. The item must be free from intentional mercury compounds and Class I ozone-depleting chemicals, with exceptions strictly defined. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements (RP001), and markings must include the contract number, NAWC CAGE code, and part number unless drawings specify otherwise. Delivery is scheduled for 378 days after delivery order, with FOB Origin, and the government has explicitly stated that surplus items are not acceptable. Unique Identification is not required per customer request, though traceability through serialization remains critical.

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-246U

The contract specifies the procurement of a starter motor with part number CR306B004ZABB and NSN 6110012999272, requiring one unit to be delivered within 20 days FOB destination. Strict prohibitions are in place against the use or incorporation of Class I ozone-depleting chemicals, superseding any conflicting specification requirements while maintaining all product performance standards; alternative chemicals require prior approval unless explicitly authorized. Mercury and mercury-containing compounds are banned from direct contact with the hardware except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is designated as a critical application item and must be shipped by the fastest traceable means—parcel post is prohibited—with delivery directed to the USNS COMFORT at FPO AE 09566. The solicitation is issued under contract number SPE7M1-26-T-246U, with a required delivery date of July 29, 2026, and incorporates technical and quality requirements from the DLA Master List, governing revisions based on the acquisition type and timeline. The unit of issue is EA, and the contract is managed by the Department of Defense under the Maritime Supply Chain organization.

Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-246K

The contract pertains to the procurement of one gate valve identified by NSN 4820014831523 and part number 1305-016-200 from Milwaukee Valve Co. Inc., with a required delivery within five days of the contract date and FOB destination terms. The item must comply with all DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging, cushioning, containment, and marking standards compliant with MIL-STD-129, with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must feature shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. The delivery destination is the SRF-JRMC Yokosuka Naval Base in Japan, with a required delivery date of July 31, 2026, and zero variance allowed in quantity. All shipments must adhere to DLA transportation procedures C19 and C20, and the unit of issue is EA as defined by the DoD authorized standard. The solicitation number is SPE7M1-26-T-246K, which incorporates technical and quality requirements from the DLA Master List, and the contract is subject to revision controls based on the acquisition size and amendment dates.

Industrial Valve Manufacturing

POSTED

about 12 hours ago

DEADLINE

PANEL, CONTROL, ELECT

Solicitation # SPE7M1-26-T-246M

The contract pertains to the procurement of a control panel, specifically identified by NSN 6110-01-673-4656 and part number 453-0033 from ACR ELECTRONICS, INC., with a total quantity of 34 units to be delivered within 183 days. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including packaging guidelines under MIL-STD-2073-1E and marking per MIL-STD-129. Packaging must adhere to DLA’s procurement requirements, with specific handling instructions including dry preservation, E5 unit containers, and shockproof containment for any incidental mercury-containing components, as authorized only under narrow exceptions defined by NAVSEA. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and no intentional addition of mercury or its compounds is permitted unless explicitly exempted. Delivery is FOB origin with zero variance in quantity, inspection and acceptance occurring at the destination, with the shipment directed to DLA Distribution Depot Oklahoma at Tinker AFB. The purchase is part of a total small business set-aside under NAICS code 335314, with the original required delivery date of March 7, 2027, and a need ship date of February 14, 2027. Pricing is fixed at $34.00 per unit for a total contract value of $1,156.

Relay and Industrial Control Manufacturing

POSTED

about 12 hours ago

DEADLINE

RESISTOR, CHIP, FIXED

Solicitation # SPE7M1-26-T-246W

The contract specifies the procurement of 2 fixed chip resistors with NSN 5905-01-611-0811 under solicitation SPE7M1-26-T-246W, requiring delivery within 80 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The items must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and unit packaging codes, with all marking adhering to MIL-STD-129 and the IPC/JEDEC J-STD-609 standard for lead finish identification on each individual unit pack. The contract enforces zero variance in quantity, with inspection and acceptance occurring at the destination, and includes detailed parcel post and shipping instructions. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with revision control tied to the solicitation issue date for simplified acquisitions. The resistors are supplied by Northrop Grumman Systems Corporation and State of the Art, Inc., under their respective part numbers, and the contract mandates compliance with DLA transport and freight procedures as noted in DLAD Proc Notes C19 and C20. The original delivery deadline is December 27, 2026, with a needed ship date of November 3, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 12 hours ago

DEADLINE

RESISTOR, VARIABLE, W

Solicitation # SPE7M1-26-T-246L

The contract specifies the procurement of a variable wire wound resistor, nonprecision, identified by NSN 5905-00-764-0416 and part number M22/01-00211UB, with a required quantity of six units to be delivered within 16 days after issuance of the purchase request. The item must comply with MIL-PRF-22/1D and MIL-PRF-22E(Sup 1A) technical specifications and is designated as a critical application item, requiring adherence to strict quality and performance standards. The contractor must source components from qualified products or manufacturers lists as defined by applicable procurement notes, and all units must bear lead finish markings per IPC/JEDEC J-STD-609, clearly identifying lead content on each individual unit package. Packaging must conform to MIL-STD-2073-1E and marking must follow MIL-STD-129 with special code ZZ addressing additional requirements. The contract strictly prohibits the use of class I ozone-depleting substances in any phase of manufacturing or processing unless written approval is obtained from the contracting officer, and forbids intentional addition of mercury or mercury-containing compounds to the item or its contact surfaces, with limited exceptions for functional uses in defined applications such as specific batteries, lighting, sensors, or chemical reagents approved by NAVSEA. Portable mercury-containing devices must be shockproof with secondary containment as per NAVSEA 5100-003D. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring upon arrival. The unit price is $6.00 per unit, total value is $36.00, and the contract includes no quantity variance. The solicitation was issued under contract number SPE7M1-26-T-246L, with a response deadline of August 14, 2026, and an original required delivery date of April 12, 2026. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 12 hours ago

DEADLINE

CABLE, POWER, ELECTRICAL

Solicitation # SPE7M1-26-T-246V

This contract is for the procurement of 1,500 feet of electrical power cable identified by NSN 6145014748444, with the specific part number M27500B16WR4U00, manufactured to meet NEMA WC 27500-2025 Revision NR dated 01/01/2025. The cable must be supplied in continuous length as dictated by the advice code, with packaging conforming to ASTM D3951 and labeling per MIL-STD-129, while adhering to all higher-priority requirements listed in the DLA Master List of Technical and Quality Requirements. Packaging must be palletized according to RP001, with a unit of issue of 500 feet per pack, and the total quantity is subject to a plus or minus 5% variance. Delivery is required FOB origin within 210 days, with inspection and acceptance occurring at the destination, and the specified delivery point is DLA Distribution Warner Robins, Robins AFB, Georgia. The cable is sourced from a qualified products list, and full and open competition applies, with no exceptions permitted under the specified technical standard. The solicitation number is SPE7M1-26-T-246V, issued by the Department of Defense under the Maritime Supply Chain organization, with a response deadline of August 14, 2026, and a posted date of August 3, 2026. Performance is mandated at Robins AFB, GA, and the contract includes stringent configuration control through Engineering Change Proposal and variance request protocols. Any deviation from technical or quality specifications must be formally requested and approved. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue must align with the official DoD and ANSI X12 standards provided by the DLA. The point of contact for inquiries is Alisha Blanton, and all documentation referenced, including packaging, shipping, and technical compliance, must be strictly followed to ensure contract fulfillment.

Copper Rolling, Drawing, Extruding, and Alloying

POSTED

about 12 hours ago

DEADLINE

FILTER ELEMENT, FLUI

Solicitation # SPE7M1-26-T-246N

The contract pertains to the procurement of a Filter Element, Flui with NSN 4330-01-544-3410 and part number SO-636CM furnished by Parker Hannifin Corp. A total quantity of 107 units is required at a unit price of $107.00, resulting in a total contract value of $11,449.00. Delivery is to be made FOB origin within 139 days from the original required delivery date of January 1, 2027, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item is classified as a critical application with no shelf life requirement. All packaging must comply with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence, mandating marking and labeling per MIL-STD-129 and palletization in accordance with RP001. The unit of issue is each (EA), and the packaging configuration must align precisely with the contract-specified QUP. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, with the same address used for freight shipping. Transportation instructions are governed by DLAD Proc Notes C19 and C20. This solicitation, identified as SPE7M1-26-T-246N, was issued on August 3, 2026, with a response deadline of August 14, 2026, and is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 333998. The contracting office is part of the Department of Defense’s Maritime Supply Chain, and the primary point of contact is Michael Reese, reachable via email and phone provided in the contract. All terms and requirements are governed by DLA standards and referenced master lists accessible through the official DLA procurement portal.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

SEAL, PLAIN ENCASED

Solicitation # SPE7M1-26-T-246Y

The contract is for the procurement of 50 units of SEAL, PLAIN ENCASED, identified by NSN 5330-01-115-7246, under solicitation number SPE7M1-26-T-246Y, with a response deadline of August 14, 2026, and a delivery requirement of 97 days ADO. The item is classified as a commercial item and must be packaged in a medium duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1 specifications, applicable to direct vendor delivery, foreign military sales, and stock shipments, to protect against UV degradation. The product must be free of asbestos, with any alternative materials subject to approval under Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision based on solicitation or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization, and covered defense information protocols are enforced. All items must comply with MIL-STD-130N for identification marking, and government identification must be removed from non-accepted supplies. The solicitation is a total small business set-aside under NAICS code 339991, issued by the Department of Defense’s Maritime Supply Chain, with performance location in New Cumberland, PA, and primary point of contact Gerald Franklin.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE