Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging and Preservation Services

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive packaging, preservation, and container preparation services fully aligned with MIL-STD-2073-1E standards, encompassing all necessary steps including cleaning, drying, application of preservation materials, precise wrapping, and adequate cushioning to protect military assets during storage and transit. All work must meet exacting defense specifications to ensure readiness and longevity of equipment under varied environmental conditions. The solicitation is issued as a subcontract under the NAICS code 332919 by the DDSP NEW CUMBERLAND FACILITY, part of the Department of Defense, with performance required at the facility located in New Cumberland, Pennsylvania, 17070-5002. Proposals must be submitted by August 10, 2026, with the solicitation posted on July 30, 2026, and further information available through the DIBBS platform.

General Info

Packaging and preservation services per MIL-STD-2073-1E at New Cumberland, PA, due August 10, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide packaging, preservation, and container preparation in compliance with MIL-STD-2073-1E, including cleaning, drying, preservation materials, wrapping, and cushioning.

Similar Contracts

Same NAICS industry code

STEM, NEEDLE VALVE

Solicitation # SPE7M4-26-U-0404

The contract solicitation SPE7M4-26-U-0404 seeks the supply of 2,445 units of a STEM, NEEDLE VALVE with NSN 4820014730651 under a Firm-Fixed-Price arrangement, with delivery required within 126 days after award and FOB Origin terms. The item is subject to stringent packaging requirements under MIL-STD-2073-1E, including clean/dry preservation without chemical treatments, unit packaging in fiberboard boxes, intermediate containment of 100 units per box, and outer packaging marked in accordance with MIL-STD-129, which mandates 2D Data Matrix barcodes and excludes any special marking. Palletization must comply with DLA Packaging Requirements for Procurement (RP001) and hazardous materials handling standards, requiring labeling per 29 CFR 1910.1200 and submission of material safety data prior to award if applicable. Inspection and acceptance occur at the destination, with full government responsibility for verifying compliance with technical, packaging, and marking standards, including adherence to the DLA Master List of Technical and Quality Requirements. The contract operates as an Indefinite-Delivery Contract with a maximum ceiling value of $350,000, containing a guaranteed minimum of 366 units after binding, and imposes ordering limits of 611 EA minimum and $350,000 maximum per order, with a seven-day aggregation cap for orders from the same office. Contractual obligations are not triggered until the first delivery order is accepted, and all shipments via ocean transport must use U.S.-flag vessels unless a formal waiver is granted at least 45 days in advance. Compliance with a wide array of Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses is mandatory, including requirements for cybersecurity safeguarding, trafficking in persons prevention, employment eligibility verification, sustainable product procurement, prohibition of hexavalent chromium, export control, electronic payment via WAWF, and safeguarding of covered defense information. Offerors must provide their Unique Entity ID and CAGE code, disclose size and socioeconomic status (including WOSB, SDVOSB, HUBZone, or SDB certifications), and affirm compliance with restrictions on procurement from Communist Chinese military companies and prohibited telecommunications equipment. All proposals must be submitted electronically via the DLA-BSM Internet Bid Board System by the July 31, 2

FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

Solicitation # N0010426QFG04

This contract pertains to the procurement of a specialized 0.25 IPS SW x 0.438-20UNF-2B x 0.438-20UNF-2B Tee Assembly, designated as Special Emphasis Level I material due to its critical role in shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must strictly conform to Naval Sea Systems Command Drawing 845-2445109, with mandatory compliance to specific material specifications including MIL-C-24679 Alloy C71500 for the Tee and QQ-N-281 Class A for the Plug. All components require full traceability from raw material through final assembly, with unique heat-lot markings permanently applied and verified against certified test reports. The Contractor must maintain a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or an acceptable alternative under MIL-I-45208 and MIL-STD-45662, subject to government audit at any time during production. All inspections, tests, and certifications, including hydrostatic testing at 1050 PSI for three minutes without leakage or deformation, visual inspection per T9074-AS-GIB-010/271, and non-destructive testing, must be thoroughly documented with electronic signatures permitted under controlled procedures. Material certification data must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard prior to shipment, with specific routing to N50286 for shipping and N39040 for inspection and acceptance, and notification sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. No material may be shipped until formal acceptance is received. Requirements for welding and brazing are tightly controlled, mandating prior submission and Navy approval of welding procedure qualifications under S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, including consumable filler metal certification and 72-hour notification to DCMA prior to test welding. Thread lubricants containing molybdenum disulfide are prohibited; only anti-galling compound A-A-59004 is permitted. All traceable materials must undergo 100% inspection for marking leg

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Solicitation # N0010426QFG30

The contract pertains to the procurement of a needle valve designated as special emphasis material (Level I, Quality Assured) for use in a critical shipboard system, where failure could lead to catastrophic consequences including loss of life or the vessel. All materials must comply strictly with Naval Ship System Command drawing 7067139 and associated specifications, including ASTM-B150 Alloy UNS C63200 Temper TQ50 or TQ55 for the valve body. Comprehensive certification and traceability requirements mandate that every component be uniquely marked with traceability identifiers linked directly to chemical and mechanical test reports, with inspections and controls extending through fabrication, welding, brazing, and subcontracted operations. All welds and brazing must adhere to S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with procedures and qualifications submitted for prior approval, and filler metals verified prior to use. Chemical and mechanical test reports must be complete, unqualified, and directly traceable to the material’s heat or lot number, with transcription prohibited and all certifications signed by authorized personnel. The contract enforces a zero-defect acceptance policy with 100% inspection of certification documents, traceability markings, non-destructive test results, and material compliance, supported by mandatory quality systems aligned with ISO-9001, ISO-10012, and ISO/IEC 17025. Government quality assurance is conducted at source, requiring prior notification of the Defense Contract Management Agency and on-site inspections. Delivery must occur within 365 days of contract award, with certification data submitted at least 20 days prior to each shipment for Portsmouth Naval Shipyard review and acceptance, using the WAWF system with updated DODAAC N50286. The order is designated as a “DO” rated priority under the Defense Priorities and Allocations System, subject to Buy American and Small Business set-aside provisions, and falls under Emergency Acquisition Flexibilities. All changes to configurations require formal Engineering Change Proposals, and waivers or deviations must be formally requested and approved by the Contracting Officer. Mercury-free compliance, proper packaging per MIL-STD-2073, and strict adherence to distribution statement controls are further mandatory conditions.

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

48--VALVE, CONTROL

Solicitation # N0010426RBT44

This contract is a firm fixed-price solicitation issued by the Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS-MECH) under solicitation number N0010426RBT44 for the procurement of a control valve, with a closing date of July 30, 2026. The contract mandates strict compliance with a comprehensive suite of military and technical specifications, including First Article Testing requirements for the valve body casting (BPR300-625 Item 16), which must be conducted on one unit and submitted for government approval prior to any manufacturing. All technical documentation such as drawings, Individual Repair Part Ordering Data (IRPOD), and Standard Technical Requirements (STRs) must be sourced exclusively from the secured BPMI e-Commerce website, requiring pre-registration and password access; no hard copies will be mailed. The contractor is required to maintain a government-acceptable inspection system and retain complete records of all inspection activities throughout performance and beyond. Packaging must adhere to MIL-PRF-23199 and related cleanliness control standards, excluding fire-retardant materials, and mercury or mercury-containing compounds are strictly prohibited from contact with the hardware. The contract enforces a strict order of precedence among documents, with contract amendments and schedules superseding all others, and requires full implementation of cited document revisions without partial use unless formally approved. Contractor waiver or deviation requests must include full justification, technical data supporting the alternate item, and must be reviewed by the Government Quality Assurance Representative before submission to the post-award contracting officer. Data deliverables must follow the DD Form 1423 format, with specific submission timelines such as 45 days after contract award for procedure packages and at end-of-contract for test and inspection reports, each tied to unique DI-QCIC sequence numbers and submitted in separate packages per unique contract item. Pricing is valid for 90 days post-closing, and submissions must be complete, signed, and received by the deadline; no exceptions are permitted. The solicitation further requires compliance with cybersecurity maturity model certification, equity provisions for veterans and workers with disabilities, small business representation, limitation of liability for high-value items, and adherence to security prohibitions and transportation protocols. All contractual documents are deemed issued upon electronic transmission, and the Point of Contact is Adele Lamb, with all communications required to be directed through official Navy channels.

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

Solicitation # N0010426QFF57

This contract pertains to the procurement of a critical valve assembly classified as Special Emphasis Material (Level I), where failure could result in catastrophic consequences including loss of life or ship. The material must meet stringent quality and traceability standards, with all components requiring detailed chemical and mechanical certification traceable from raw material through final assembly. Each item must be permanently marked with unique identifiers linked to certification data, and strict controls govern material handling, subcontractor oversight, and process alterations to ensure no commingling or loss of traceability. All metallic components must conform to specific alloys such as QQ-N-281, QQ-N-286, ASTM-B150, and SAE-AMS-QQ-S-763, with testing requirements including ultrasonic inspection, liquid penetrant testing, intergranular corrosion testing, pressure tests, and slow strain rate tensile testing conducted only by designated labs. Radiography is mandatory for critical castings and welds, with shooting sketches, film, and reader sheets subject to Navy approval prior to shipment. Welding and brazing processes must be pre-approved, documented, and performed only by qualified personnel using approved procedures, with no repairs permitted on QQ-N-286 material. Fasteners require specific markings, including six-dot patterns for self-locking types, and all traceability must remain intact through every manufacturing stage. The contract mandates a quality system compliant with ISO-9001 or MIL-I-45208, with full government inspections at source and mandatory submission of Certificates of Compliance certifying 100% conformance. Delivery is restricted to within 365 days of contract effective date, with all certifications and test data submitted via WAWF and ECDS systems, and the order is designated as DO-rated under the Defense Priorities and Allocations System for national defense priority. Access to classified drawings is required for award, and the contractor must maintain a facility clearance in accordance with FAR 52.204-2.

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPRMM126QKG80

This contract is issued under solicitation SPRMM126QKG80 by the Department of Defense through DLA Mechanicsburg for the procurement of a CHECK VALVE with the CAGE code 54497 and reference number 1213C2817. The contract mandates strict adherence to military and industry quality standards including MIL-STD-130 Rev N for marking, IPC J-STD-001 Class 3 for soldering, and MIL-STD-2073 for packaging. Inspection and acceptance of the material must occur at the source as defined by DLA Procurement Note E06, with final acceptance of packaging also to be conducted at a designated location to be specified. All deliveries require electronic submission of invoices and receiving reports via PIEE-WAWF, and contractors must be registered in the Procurement Integrated Enterprise Environment and comply with mandatory use of Workflow Pro. Compliance with higher-level quality requirements is enforced through ISO 9001, and the evaluation for award is strictly based on Lowest Price Technically Acceptable criteria. The contractor must be an authorized distributor of the original equipment manufacturer, subject to providing documentation on company letterhead signed by an authorized official. Any change to design, material, part number, or production facility requires prior written approval from the Contracting Officer, with specific codes indicating the nature of the change and a mandatory $250 administrative cost reduction for facility changes. Records of all inspections must be maintained for 365 days after final delivery, and non-compliant or defective materials are not acceptable even under sampling protocols. Technical documentation and specifications referenced in the contract must be obtained from authorized sources, with additional controls on distribution and access due to official use and NOFORN designations. The solicitation response deadline is August 31, 2026, and communication must be routed through the designated point of contact. Contractors are also encouraged to register with NAVSUP WSS to receive automated notifications regarding contract issuance and updates.

SPRMM1 DLA Mechanicsburg

POSTED

about 18 hours ago

DEADLINE

in about 1 month

ACTUATOR,ELECTRO-ME

Solicitation # N0010426QYADZ

This contract pertains to the repair of the ACTUATOR,ELECTRO-ME under solicitation N0010426QYADZ, with a response deadline of August 31, 2026. All repairs must adhere strictly to the contractor’s internal standards and approved technical documentation, including manufacturer drawings and military specifications, and must comply with MIL-STD-130 Rev N for item marking. The repair turnaround time is measured from the physical receipt of the F-condition asset at the contractor’s facility, as recorded in the Commercial Asset Visibility system, and completion must occur within the specified timeframe with final government inspection and acceptance. The contract requires full compliance with the Buy American Act and related certification provisions, Mercury Free standards prohibiting contamination from metallic mercury or mercury compounds during manufacturing or testing, and mandatory cybersecurity maturity model certification. All submissions must include unit price, total price, repair turnaround time, and an informal cost breakdown if applicable. The contractor must be an authorized distributor of the original manufacturer and provide proof of authorization with the response, and all work must be performed at a facility with a documented CAGE code. Inspection and acceptance are the contractor’s responsibility, though the government reserves full rights to conduct audits and inspections. Records of all quality assurance activities must be maintained for 365 days post-delivery. Freight is FOB Origin, and the award will be bilateral, requiring written contractor acceptance. Government Source Inspection is mandatory, and any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer using specified code designations. Packaging must meet MIL-STD-2073 requirements, and all subcontractors are bound by identical mercury and quality compliance obligations. The contract is governed by the terms of Basic Ordering Agreement N0010424GZ901, and all referenced documents must be obtained from designated government sources.

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in about 1 month

REPAIR MODULE,STRAI

Solicitation # SPRMM126QMH22

This solicitation seeks the manufacture and delivery of the REPAIR MODULE,STRAI under a fixed-price contract issued by the Defense Logistics Agency (DLA) Mechanicsburg, with the solicitation number SPRMM126QMH22. The requirement mandates strict adherence to military standards including MIL-STD-130 REV N for marking and MIL-STD-2073 for packaging, with all work performed at the approved production facility unless a formal, cost-justified change is approved in writing by the Contracting Officer. The contract incorporates mandatory inspection protocols at source, requiring the contractor to manage and document all quality assurance activities, maintain inspection records for 365 days post-delivery, and ensure full compliance with specifications even when explicit inspection clauses are absent. Submission of quotes must be electronic via EDI, with any deviations clearly stated; failure to do so will result in award based solely on solicitation terms. Contractors must disclose their status as OEMs or authorized distributors, providing CAGE codes and part numbers, and must register for the PIEE-WAWF system to electronically submit invoices and receiving reports post-award. The contract operates under the Lowest Price Technically Acceptable (LPTA) evaluation method and requires full compliance with security and export control regulations, including handling of NOFORN and Official Use Only documents through designated DLA channels. All technical data and drawings must be safeguarded according to designated distribution statement codes, and contractors are subject to prohibitions against unauthorized production facility changes, substitutions, or alterations without prior written approval and a $250 administrative cost reduction. The offer must be submitted by August 14, 2026, and is governed by mandatory clauses such as the Warranty of Title, Inspection of Supplies, and Mandatory Use of Wide Area Workflow, along with current government-wide policy deviations on representations and security exclusions. Vendors are strongly encouraged to register with NAVSUP Weapon System Support for automated notifications via NECO and the PIEE Electronic Data Access tool to track contract issuance and modifications. All contractual documents are deemed issued upon electronic transmittal, and failure to provide contact information or proof of authorized distribution will disqualify the offer.

SPRMM1 DLA Mechanicsburg

POSTED

about 18 hours ago

DEADLINE

PARTS KIT,BALL VALV

Solicitation # N0010426QZB63

This contract pertains to the supply of a specialized parts kit for a size six-inch ball valve, designated as SPECIAL EMPHASIS material due to its critical role in shipboard systems where failure could lead to catastrophic consequences including loss of life or the vessel itself. The components include a ball conforming to NAVSEA Drawing 845-8617511 and two mating seats from Drawing 845-7285297, each subject to stringent material, dimensional, and performance requirements. The ball must be manufactured from SAE-AMS-6931 or centrifugally cast 6AL-4V titanium with precise mechanical properties, while the seats must be fabricated from Dupont AF DE588 Delrin with tightly controlled physical properties including specific gravity, tensile strength, water absorption, and Teflon fiber content. Surface finish requirements mandate a matte dull appearance with a roughness between RHR 12 and 16 achieved through a specific polishing process using SUPFINA paste and a wool pad, followed by thorough cleaning. All items require full traceability from raw material through final assembly, with permanent markings on the ball and seats linked directly to certification data, and non-metallic materials must be certified by lot or batch with complete documentation. Hydrostatic testing at 1050 PSI for 30 minutes is mandatory for each ball, with dye penetrant inspection as an approved alternative for manufacturers lacking test fixtures. Non-destructive testing, welding, and brazing procedures must conform to S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, with all procedures and welder qualifications submitted for prior approval. Quality assurance is comprehensive and governs every phase of production and delivery. The contractor must maintain an ISO-9001 compliant quality system with calibration standards aligned to ISO-10012 or ANSI-Z540.3, and all material certifications must include quantitative chemical and mechanical analysis, traceable to unique heat, lot, or batch numbers physically marked on each component. Certification reports must be signed, unqualified, and submitted through the Wide Area Work Flow system with specific routing to Portsmouth Naval Shipyard for review and acceptance prior to shipment. Government inspection at source is required, and the Defense Contract Management Agency must be notified immediately upon contract award. The contract mandates a zero-defect acceptance standard for final inspection with 100

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in about 1 month

VALVE,LINEAR,DIRECT

Solicitation # N0010426QYADY

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in about 1 month

PARTS KIT,SOLENOID

Solicitation # SPRMM126QKG59

SPRMM1 DLA Mechanicsburg

POSTED

about 18 hours ago

DEADLINE

in about 1 month

VALVE FIRING ASSY

Solicitation # N0010426QFG31

This contract pertains to the repair and refurbishment of a Valve Firing Assembly designated as Special Emphasis Level I material, critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel integrity. The work requires full refurbishment to “like new” or “A” condition under a firm fixed-price structure, encompassing teardown, inspection, and restoration in strict accordance with detailed naval drawings, including 2882675, 2882676, 2882678, 2882683, and others. The contractor must adhere to exact material specifications such as MIL-C-24707, ASTM-A744, ASTM-B584, and QQ-N-281, with mandatory chemical and mechanical testing, radiography, hydrostatic testing, and non-destructive inspections including liquid penetrant and intergranular corrosion analysis. Traceability from raw material to finished component is absolute, requiring permanent markings linked to certified test reports, with re-certification needed if any process alters material properties. All certifications must be positive, unqualified, and directly traceable through heat or lot numbers marked on the part. Strict quality assurance protocols are enforced, mandating ISO-9001 compliance with calibration systems aligned to ISO-10012 or ANSI-Z540.3, and full Government inspection at source authorized under Navy control. Subcontractors must be vetted, and their work subject to the same rigorous documentation and traceability requirements. Fasteners must comply with MIL-DTL-1222, including specific marking requirements, wedge tensile testing, and prohibited use of molybdenum disulfide lubricants—an anti-galling compound A-A-59004 is required instead. Welding procedures demand prior approval, with full documentation submitted electronically, including WPS and PQR data, and radiographic inspection records must be submitted at least 45 working days before shipment. A certificate of compliance must be provided for every item, confirming adherence to all specifications and test requirements, with no disclaimers permitted. Delivery is scheduled to be completed within 218 days of contract effective date, with certification data submissions due 20 days prior to delivery. The order is DO-rated under the Defense Priorities and Allocations System, issued under Emergency Acquisition Flexibilities, and is a total small business set-aside requiring adherence to all applicable Buy American, Security Prohibitions

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

VALVE ASSEMBLY, MANIFOL

Solicitation # SPE7MC-26-T-142Y

The contract is for the procurement of 16 units of a valve assembly manifold with NSN 4820-01-408-2849 and part number 85564-05-24, sourced from approved suppliers including AMZ Alabama Inc. BAE Systems Tactical Vehicle Systems LP Parker-Hannifin Corporation and Grove U.S. LLC. The item is designated as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements which take precedence over any other standards such as ASTM D3951. Packaging must follow MIL-STD-129 for marking and labeling and adhere to RP001 DLA Packaging Requirements for Procurement including palletization guidelines. The unit of issue is each EA with no quantity variance allowed and delivery is scheduled 157 days after award with FOB origin terms. Inspection and acceptance occur at the destination. The delivery address is the DLA Distribution facility in New Cumberland Pennsylvania and the required delivery date is April 10 2027 though the need ship date is January 5 2027. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7MC-26-T-142Y with a response deadline of July 31 2026 and the contracting activity is the Department of Defense through the DDSP New Cumberland Facility with Paula McClary as the point of contact.

Industrial Valve Manufacturing

POSTED

about 13 hours ago

DEADLINE

FLUSH KIT, AIR CONDI

Solicitation # SPE8E8-26-T-4482

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

COMPRESSOR, REFRIGERATI

Solicitation # SPE8E8-26-T-4765

The contract pertains to the procurement of 14 units of a refrigeration compressor, identified by NSN 4130-01-574-7713 and part number 18-00091-113 from Carrier Corp, under solicitation SPE8E8-26-T-4765. Delivery is required within 195 days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, unless superseded by higher-priority DLA Master List of Technical and Quality Requirements, which take full precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The unit of issue is each, with a total contract value of $14.00 per unit. The designated delivery point is the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. The original required delivery date is February 18, 2027, with a need ship date of February 12, 2027. Transportation and freight shipping instructions are governed by DLAD Proc Notes C19 and C20. Documentation for source approval and handling of covered defense information are applicable, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the solicitation issue date. The contract was posted July 20, 2026, with responses due by July 31, 2026, under NAICS code 332112.

Nonferrous Forging

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7L7-26-Q-2101

POSTED

about 13 hours ago

DEADLINE

LIFE PRESERVER, VEST

Solicitation # SPE8E6-26-T-3762

This contract is for the procurement of 500 medium-sized orange life preserver vests, identified by NSN 4220012520500 and part number MV3128-T2 from MUSTANG SURVIVAL, INC. The items must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with packaging and marking strictly adhering to MIL-STD-2073-1E and MIL-STD-129. No asbestos or intentional mercury or mercury-containing compounds are permitted, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or naval-specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. The contract specifies a firm fixed price for 500 units with zero variance tolerance, delivery FOB origin in 27 days, and inspection and acceptance occurring at the destination. Packaging must meet DLA standards with unit containers marked appropriately and no special marking required. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation must follow DLAD Proc Notes C19 and C20. The solicitation is a Total Small Business Set-Aside under NAICS code 333310, with responses due by July 31, 2026, and the item has no shelf life requirement. The point of contact for inquiries is John Lieb at the Department of Defense.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

Transportation and Delivery Logistics (FOB Destination)The contract entails the full arrangement and execution of shipping goods to the Defense Logistics Agency facility in New Cumberland under FOB Destination terms, requiring the contractor to assume all transportation costs and assume complete risk of loss or damage until the goods are officially delivered to the designated location. The contractor is responsible for managing every phase of transit including packaging, labeling, carrier selection, tracking, and final delivery, ensuring compliance with all federal and military logistics standards without recourse for additional reimbursement. Delivery must be completed at the specified address with zip code 17070-5002, and all obligations under this agreement terminate only upon confirmed receipt and acceptance by the receiving facility. This is a subcontract under NAICS code 484220, issued by the Department of Defense through the DDSP New Cumberland Facility, with a posted date of July 30, 2026 and a required response deadline of August 10, 2026. Performance of all activities is tied exclusively to the New Cumberland delivery point, and no alternative locations or exceptions are permitted. The contractor must operate in strict alignment with defense logistics protocols, maintain detailed documentation of shipment movements, and bear full financial and operational accountability from origin through final delivery, with no transfer of risk until physical handoff is complete at the destination.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Marking, Labeling, and Bar-Coding ServicesThe contract requires the application of MIL-STD-129 compliant markings and data matrix barcodes on containers and individual items destined for shipment to the DLA New Cumberland facility. All labeling must strictly adhere to the U.S. Department of Defense standards for uniform identification, ensuring accurate tracking, inventory management, and logistical processing throughout the supply chain. The work involves precise labeling procedures that integrate machine-readable codes with human-readable information to meet federal requirements for defense logistics. This is a subcontract solicitation posted on July 30, 2026, with a response deadline of August 10, 2026, under NAICS code 811411, which corresponds to commercial and industrial machinery and equipment repair and maintenance. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contracting agency is the Department of Defense through the DDSP New Cumberland Facility. The scope is focused entirely on marking and barcoding services without additional supply or logistics responsibilities, and the solicitation is issued under a general subcontract structure without a specific set-aside designation.

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

Packaging, Preservation, and Preservation Material SupplyThe contract requires the cleaning, drying, and preservation of rear sights in accordance with MIL-STD-2073-1E, specifically using Method 33 for cleaning and drying, which includes thorough fingerprint removal and the application of a preservative coating to ensure long-term protection. The work must comply strictly with military packaging and preservation standards to maintain operational readiness and prevent corrosion or degradation during storage and transport. All procedures must be performed with precision to meet the specified technical requirements for military-grade components. This subcontract is issued under NAICS code 339920, indicating it pertains to other miscellaneous manufacturing, and is managed by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. Performance is designated to occur at New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The opportunity was posted on July 30, 2026, and responses are due by August 10, 2026, providing vendors a short window to submit proposals. The contract is part of a broader effort to supply and maintain defense-related packaging and preservation materials, with no set-aside designation specified, making it open to all qualified contractors.

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract titled Hazardous Materials Compliance and Labeling Services requires the contractor to identify, label, and document all hazardous materials used in manufacturing or preservation processes. This includes preparing and submitting accurate hazard warning labels and Material Safety Data Sheets to the contracting officer in accordance with federal requirements. The work is scoped to ensure full regulatory compliance with safety and environmental standards applicable to Department of Defense operations. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical location where the hazardous materials handling and documentation activities must occur. The NAICS code 541690 classifies this as other scientific and technical consulting services, reflecting the specialized expertise needed for hazard communication and compliance. The contract is structured as a subcontract and was posted on July 30, 2026, with a response deadline of August 10, 2026, allowing prospective vendors a limited window to submit proposals. The contracting activity is managed by the DDSP New Cumberland Facility under the Department of Defense, indicating this effort supports critical defense-related manufacturing or preservation activities. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors regardless of business size or certification status. The solicitation link is provided for official documentation and submission, though no point of contact is listed, suggesting proposals should follow general DLA procedures. Compliance with labeling and MSDS submission timelines is essential to meet operational and safety requirements for the facility.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Manufacture and Supply of Rear Sights (Firearms Components)The contract requires the manufacture and delivery of 98 units of SIGHT, REAR with National Stock Number 1005016897899, designed to meet strict military specifications for the DLA Distribution New Cumberland facility. All units must be produced in full compliance with applicable defense standards to ensure compatibility, durability, and operational reliability in military firearms systems. The work is classified as a subcontract under the NAICS code 332999, indicating it involves other fabrication services not elsewhere classified, and the performance location is specifically tied to New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, giving potential contractors approximately two weeks to submit proposals. The contract is managed by the Department of Defense through its DDSP New Cumberland Facility, and while no set-aside provisions are specified, the requirement is explicitly for a defense-related component crucial to armament systems. Contractors must ensure all technical, quality, and delivery requirements are met to satisfy DLA’s logistics and supply chain obligations without deviation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Small Business & Socioeconomic Representation Support

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Export-Controlled Items Management (ITAR/EAR)

All Other Support Activities for Transportation

POSTED

DEADLINE