Top

Military-Compliant Packaging, Labeling, and Palletization

Active

Federal

Response Deadline07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → DLA FLEET READINESS CT SOUTHWEST DLAView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

SAN DIEGO, CA, 92135-7058, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → DLA FLEET READINESS CT SOUTHWEST DLA

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA FLEET READINESS CT SOUTHWEST DLA

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Provide full packaging, labeling, marking, and palletization of manufactured aircraft skin components in compliance with DLA and military standards.

Similar Contracts

Same NAICS industry code

NAICS: 488190

New

Federal

T-6/T-34 Aircraft Maintenance and Contractor Logistics Support (CLS): Draft Request for Proposal (RFP)The U.S. Navy is seeking proposals for T-6 and T-34 aircraft maintenance and Contractor Logistics Support services under a draft Request for Proposal with solicitation number N00421-26-R-1011, issued by the Naval Air Warfare Center Air Division at Patuxent River, Maryland. Offerors must submit responses by August 7, 2026, and are advised that a comprehensive Technical Data Library containing detailed information on requirements will be available upon request prior to the final solicitation release, subject to government review and approval. This library is critical for understanding the full scope of technical and operational expectations. The NAICS code 488190 applies, and the contract is open to all qualified suppliers without a specific set-aside designation. Primary and secondary points of contact are provided for inquiries, with Casey Bacon and Kathleen Dougherty serving as the main liaisons. All draft documents and attachments must be accessed through the PIEE Solicitation Module, and interested parties should note that no place of performance details are currently specified.

Naval Air Warfare Center Air Division

POSTED

DEADLINE

INDICATOR, LIGHTThe contract issued by the Defense Logistics Agency under solicitation number SPE4A6-26-T-06KG seeks the procurement of two indicator, light items identified by NSN 6210016236699, with a total quantity of four units distributed across three contract line items: two units under CLIN 0001 and one unit each under CLIN 0002 and CLIN 0003. Delivery is required within 20 calendar days to the destination address aboard the USS MICHAEL MONSOOR DDG 1001 at APO AP 96694, with all shipments delivered FOB destination, meaning the contractor assumes all transportation costs and risks until receipt at the designated location. Packaging must adhere to ASTM D3951 standards, but DLA’s Master List of Technical and Quality Requirements takes precedence over it, mandating full compliance with RP001 for palletization and MIL-STD-129 for marking and labeling, including proper Unit of Issue and Quantity per Unit Pack identification. Barcoding is implied through MIL-STD-129 compliance. Shipment must be made using traceable freight methods via VSM with RDD 777, explicitly prohibiting parcel post. The material is classified as a critical application item and is subject to defense information safeguards under RD003. Inspection and acceptance occur at the delivery point, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or equivalent AQLs. The contract incorporates a full suite of FAR and DFARS clauses, including those on equal opportunity, combating trafficking, employment eligibility, sustainable products, hazardous materials identification (with mandatory SDS compliance under 29 CFR 1910.1200 and Federal Standard No. 313), safeguarding covered contractor information systems, and changes. The offeror must provide a unique entity ID and CAGE code, represent small business status if applicable, and disclose if providing covered defense telecommunications equipment. Invoicing must occur through Wide Area WorkFlow, and while the contract includes clauses for accelerated payments to small business subcontractors and unenforceability of unauthorized obligations, pricing and total contract value are not specified, rendering the financial terms incomplete. The solicitation closes on July

ASC COMMODITIES DIVISION

POSTED

DEADLINE

COUNTER ASSEMBLYThe counter assembly, identified by NSN 1680-LL-SNS-A263 and part number 36011, is a critical application item supplied by CARP INDUSTRIES CORP and AEROSONIC LLC, with a single unit requirement under solicitation SPEFA1-26-T-0262. Delivery is mandated within five days of award, FOB destination, with zero tolerance for quantity variance and inspection and acceptance occurring upon arrival at the designated location. The item must comply with the DLA Master List of Technical and Quality Requirements which supersede other standards, and packaging must adhere to ASTM D3951 as enhanced by MIL-STD-129 labeling and RP001 DLA packaging directives. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. No shelf life constraints apply, and unit identification is not required per DFARS 252.211-7003(c)(1)(i). The shipment must be sent by the fastest traceable means excluding parcel post to the specified San Diego delivery address, with an original required delivery date of July 27, 2026. The contract specifies a single unit at a defined price under purchase request 7017595748, with point of contact and procurement details managed by the Department of Defense under DLA oversight.

DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

DEADLINE

TUBE ASSEMBLYThe contract pertains to the procurement of two tube assemblies, identified by part number 901-060-380-101 and NSN 1560LLCFQB165, manufactured to drawing 901-060-380 under CAGE code 97499 by Bell Textron Inc. The total contract value is $4.00, with a unit price of $2.00 per unit and a fixed quantity of two units, subject to no variance in quantity. Delivery is required within 95 days after contract award, with an original required delivery date of December 24, 2026, under FOB destination terms to the Fleet Readiness Center DLA in Cherry Point, North Carolina. The item has no shelf life requirement, and acceptance occurs at the delivery point, where government representatives will inspect the goods for conformity to specifications. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criteria unless otherwise specified; unspecified attributes are considered major with an AQL of 1.0. All packaging must comply with ASTM D3951 as modified by the DLA Master List of Technical and Quality Requirements, and marking must adhere to MIL-STD-129 and MIL-STD-130N(1) for unique item identification, including UID and barcode requirements. Palletization must conform to RP001 DLA Packaging Requirements. The contractor is required to submit invoices and receiving reports electronically via Wide Area WorkFlow (WAWF), comply with all applicable hazardous material labeling under OSHA’s Hazard Communication Standard and federal statutes, and implement NIST SP 800-171 safeguards and cyber incident reporting as mandated by DFARS clauses. The contract includes mandatory clauses related to combating human trafficking, employment eligibility, sustainable products, restrictions on hexavalent chromium, prohibitions on acquiring items from Chinese military companies, and disclosure of information, with deviations permitted under specified government authorization. Offerors must be registered in SAM.gov, provide their UEI and CAGE code if supplying covered defense telecommunications equipment, and represent their small business or socioeconomic status if claiming preferences. The solicitation was issued on July 23, 2026, with proposals due by July 31, 2026, and must be submitted electronically through DIBBS. Contract administration is handled by the

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

DUMMY CONNECTOR, RECThe contract is for the procurement of 253 units of a dummy connector, receptacle, identified by NSN 5935-01-568-5740 and part number 1263-000-N090, under solicitation SPE7M5-26-T-347Y. Delivery is required within 168 days of contract award, with shipment delivered FOB origin and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including special marking requirements that omit the item description on shipping labels due to its status as a controlled item under protected cargo provisions. All packaging and handling must adhere to DLA’s packaging standards, with no variance allowed in quantity. The item is subject to prohibitions on ozone-depleting substances in any manufacturing or testing process unless explicit written approval is obtained from the contracting officer, and the prohibition does not apply to commercial items as defined in FAR 11.001. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and all technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, with revisions tied to the solicitation or award date depending on acquisition size. The delivery address is Warner Robins AFB, Georgia, and the required ship date is January 19, 2027, with the original delivery date set for January 9, 2027. The unit price is $253.00 per piece, totaling a contract value of $63,919.00.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

DIAPHRAGMThis contract pertains to the procurement of 25 diaphragms, identified by NSN 1015-LN-003-4266 and part number B3-132-1, manufactured by Parker Hannifin Corporation under DLA solicitation SPEFA5-26-T-0948. The item is classified as a critical application component with no shelf life requirement and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which supersede any other specifications. Sampling and inspection protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise stated, and attributes must be verified at specified levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0. All units must be identified per MIL-STD-130N dated November 16, 2012. Delivery is required within 52 days to the destination, with FOB terms placing responsibility at the delivery point, and inspection and acceptance also occur at destination. Packaging must adhere to ASTM D3951, but DLA Master List requirements take precedence, and all packaging and labeling must conform to MIL-STD-129 with palletization following DLA’s packaging guidelines. The unit of issue is each, with no variance permitted in quantity, and the contract specifies a required delivery date of November 3, 2026. The item is to be shipped to the Fleet Readiness Center at Cherry Point, NC, with distinct parcel post and freight shipping addresses provided. The contract was issued by the DLA Fleet Readiness Center, with Sheila Smith listed as the primary point of contact.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

BRACKETThe contract pertains to the procurement of a bracket with NSN 5341-LN-003-5705 and part number 71205-23001-104, under solicitation SPEFA3-26-T-0329, requiring three units to be delivered FOB destination within 84 days of the original required delivery date of July 23, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951 for packaging, with packaging and labeling must conform to MIL-STD-129 and DLA Packaging Requirements. Unit identification is not required per service customer direction, and the item has no shelf life. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs; if unspecified, attributes are treated as major. Palletization follows RP001 guidelines and the Unit of Issue is EA. Delivery is to be made to DLA Distribution Jacksonville at the specified freight address, with parcel post delivery directed to Fleet Readiness Center Southeast. The price per unit is $3.00 for a total of $9.00, with no variance allowed in quantity. All contract specifications are subject to the DLA Master List revision effective on the RFP issue date, and the solicitation was posted with a response deadline of July 31, 2026.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

TUBE ASSEMBLYThe contract pertains to the procurement of four tube assemblies identified by part number 4730-LL-HPC-E672 and NSN 4730LLHPCE672, under solicitation SPEFA5-26-T-0886, with a required delivery date of June 16, 2026, and a lead time of 184 days. Delivery is to be made FOB destination, with inspection and acceptance occurring at the destination point. The unit price is $4.00 per unit, totaling $16.00 for the full quantity, with no tolerance for variance in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any competing standards and include mandatory referencing of MIL-STD-1916 or ASQ H1331 for sampling methods, with zero non-conformances required unless otherwise stated. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or at AQLs of 0.1, 1.0, and 4.0. Packaging must adhere to ASTM D3951 and be marked and labeled in full compliance with MIL-STD-129, while palletization follows DLA’s RP001 packaging requirements. The item has no shelf life requirement and must be physically identified per RQ017. Delivery is to be shipped to the designated freight address in Cherry Point, NC, with parcel post delivery to a separate PSC address, and the unit of issue is each (EA). The contracting office is the DLA Fleet Readiness Center, with Tanya Whitney listed as the primary point of contact.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

ANGLE RAMP FLOORThe contract pertains to the procurement of one Angle Ramp Floor, identified by NSN 1560-LL-NC0-8266 and part number P/N 65207-10042-152, under solicitation SPEFA5-26-T-0951. This is a critical application item for SIKORSKY AIRCRAFT CORPORATION and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards unless otherwise specified. Sampling and inspection mandates strict adherence to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria, with attributes classified as critical, major, or minor assigned specific verification levels or AQLs; unspecified attributes are treated as major. The item has no shelf life requirement. Delivery is required FOB destination within 113 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination. Packaging must conform to ASTM D3951 but is secondary to DLA packaging requirements, and all items must be labeled and marked per MIL-STD-129. Palletization follows RP001 guidelines. The unit of issue is one each, priced at $1.00, with total price reflecting the single unit. The delivery address for freight is Building 148, Bay C, Cherry Point NC, while the parcel post address is PSC 8021, Cherry Point NC. The original required delivery date is January 20, 2027. The contract is managed by DLA Fleet Readiness Center, with Larry Kemp as the primary point of contact.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

BRACKET LH NACELLE PYLThe contract pertains to the procurement of two Left Nacelle Pylon Brackets, designated by part number 901-069-114-405 and NSN 1560-LN-003-4752, manufactured by BELL TEXTRON INC with CAGE code 97499, in strict compliance with Drawing 901-069-114. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951, and must be followed as specified by the revision in effect on the solicitation issuance or award date. Packaging must adhere to MIL-STD-130N for identification of U.S. military property and MIL-STD-129 for marking and labeling, while palletization follows DLA-specific procurement packaging guidelines. Each unit must be packaged in accordance with ASTM D3951, but only where not superseded by the DLA requirements. The unit of issue is each, with a firm quantity of two units, no variance permitted, and delivery is FOB destination within 84 days of contract award, with an original required delivery date of January 16, 2027. Inspection and acceptance occur at the destination, with shipping directed to the Fleet Readiness Center DLA at Cherry Point, North Carolina. The contract is issued under solicitation SPEFA5-26-T-0946, with a total price of $2.00 per unit, and must be submitted per the solicitation’s response deadline of July 31, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

TUBE ASSY, ELB TO ELBThe contract pertains to the procurement of three units of a TUBE ASSY, ELBOW TO ELBOW with NSN 1560LLNC15516 and part number 65664-06312-046, sourced from SIKORSKY AIRCRAFT CORPORATION. Deliveries are required FOB DESTINATION at Cherry Point, North Carolina, with a strict 32-day delivery timeline following order placement, and the original required delivery date is set for September 28, 2026. The contract has a total value of $3.00 with no variance allowed in quantity, and inspection and acceptance occur at the delivery location. Packaging must adhere to ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements take precedence, including palletization per RP001 and marking per MIL-STD-129. Identification of the item must comply with MIL-STD-130N(1), mandating Unique Item Identification through machine-readable barcodes. Sampling for inspection follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and unspecified attributes are treated as major. The item is designated as a critical application item with no shelf life requirement. The contract incorporates numerous Federal Acquisition Regulation clauses covering cybersecurity, safety, labor, and compliance, including 252.204-7012 for safeguarding covered defense information and reporting cyber incidents within 72 hours, 252.223-7008 prohibiting hexavalent chromium, and 252.223-7006 restricting toxic material disposal. Hazardous materials must be identified under 29 CFR 1910.1200 with Safety Data Sheets submitted prior to award, and labeling must conform to applicable federal acts. All submissions must occur electronically via DIBBS by the July 31, 2026 deadline, and payment requests are to be submitted through WAWF. The acquisition involves no specified contract type, and award is likely based on price and compliance given the low value and automated procurement context. Small business representations and socioeconomic certifications are required but not yet completed. The DLA Master List of Technical and Quality Requirements governs all technical, quality, and packaging standards, overriding any conflicting documents. All packaging and marking must be consistent with MIL-

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

SKINThe contract pertains to the procurement of two units of a critical application item, skin part number 65207-10037-101 with NSN 1560-LL-NCB-1495, issued by DLA Fleet Readiness Southwest under solicitation SPEFA5-26-T-0952. Delivery is required within 183 days to a destination address in San Diego, California, with zero tolerance for quantity variance, and acceptance occurs upon arrival at the delivery point. All items must comply with DLA’s Master List of Technical and Quality Requirements, which override any alternative standards such as ASTM D3951, and packaging must adhere strictly to MIL-STD-129 for marking and labeling. The items must be palletized per DLA Packaging Requirements and shipped in accordance with the specified unit of issue. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined, with unspecified attributes treated as major. The item has no shelf life requirement and is designated as critical for use. The unit price is $2.00 per piece, totaling $4.00 for the full order, with delivery due no later than April 20, 2027.

DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

1 day ago

DEADLINE

in 7 days

View Details

More opportunities from Department Of Defense → DLA FLEET READINESS CT SOUTHWEST DLA

Same awarding agency

NAICS: 541620

New

DIBBS

Hazardous Materials Compliance and Safety Data Sheet (SDS) Management

Environmental Consulting Services

POSTED

DEADLINE

Precision Manufacturing of Critical Aircraft Skin Component

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires third-party inspection and quality validation services for tube assemblies to ensure full compliance with AS9003 and ISO 9001 standards as well as all specified contractual requirements before delivery. The work is focused on verifying that the manufactured components meet rigorous aerospace and defense quality benchmarks, with inspections performed to confirm dimensional accuracy, material integrity, and adherence to technical specifications. This quality assurance effort is critical to maintaining supply chain reliability and ensuring that all delivered assemblies are fit for use in defense and aerospace applications. The contract is classified as a subcontract under NAICS code 541330 and is managed by the Department of Defense through DLA Fleet Readiness CTC Southwest. Performance of the work is designated to take place in San Diego, California, with a response deadline of July 27, 2026. The solicitation was posted on July 19, 2026, and the organization seeking services is part of the Defense Logistics Agency’s effort to secure qualified inspection providers capable of supporting high-integrity production processes. All bidders must demonstrate capability to operate within the strict regulatory and documentation requirements of AS9003 and ISO 9001, and must be prepared to provide detailed inspection reports, test results, and certification records as part of the delivery package.

POSTED

DEADLINE

Military-Compliant Packaging and MarkingThe contract requires precise packaging, preservation, and labeling of tube assemblies in full compliance with military standards including ASTM D3951, DLA RP001, and MIL-STD-129 to ensure seamless logistics integration. All work must meet stringent technical specifications for material protection, environmental resistance, and marking clarity to support military supply chain requirements, with a specific focus on durability and traceability throughout distribution. The contract is structured as a subcontract under NAICS code 493190 and is being managed by the Department of Defense through DLA Fleet Readiness Center Southwest. Performance is to be executed at a designated location in San Diego, California, with a firm deadline for responses set for July 27, 2026. The solicitation was posted on July 19, 2026, indicating a brief eight-day window for potential subcontractors to submit proposals. While no set-aside classification is specified, the work demands specialized expertise in defense-grade packaging and adherence to federal logistics protocols. All submissions must align with the technical and procedural expectations defined by the referenced standards to ensure compliance and operational readiness.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract pertains to the application and verification of hazard warning labels and safety data sheets for tube assemblies containing hazardous materials, ensuring full compliance with DFARS and OSHA standards. All work must be performed in accordance with federal regulations governing the handling, marking, and documentation of dangerous goods, with a specific focus on accurate labeling and up-to-date safety documentation to mitigate risks during transportation, storage, and use. The task requires strict adherence to technical specifications and regulatory frameworks to maintain safety and legal compliance across defense-related supply chains. This subcontract, issued under NAICS code 541690 by the Department of Defense through DLA Fleet Readiness Southwest, is targeted for performance in San Diego, California, with a submission deadline of July 27, 2026. The solicitation does not specify a set-aside type or point of contact, and it is open to qualified subcontractors capable of delivering verified hazard communication services in alignment with defense and occupational safety mandates. Interested parties must respond by the specified deadline through the designated DIBBS portal to be considered for award.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Precision Tube Fabrication and AssemblyThe contract seeks qualified subcontractors to manufacture precision metal tube assemblies in accordance with stringent military and aerospace specifications, encompassing the full range of fabrication processes including cutting, bending, welding, and final assembly for integration into critical defense systems. All work must meet exacting quality standards and be performed at the designated place of performance in San Diego, California, with deliverables expected to support operational readiness for Department of Defense platforms. The solicitation, posted on July 19, 2026, has a firm response deadline of July 27, 2026, and is classified as a subcontract under NAICS code 332994 for other fabricated metal product manufacturing. There is no set-aside designation specified, and participation is open to eligible contractors capable of fulfilling the technical and compliance requirements tied to defense system integration.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

TUBE ASSEMBLYThis contract is for the procurement of a critical application tube assembly identified by Northrop Grumman Systems Corporation part number 123H10014-9097D-4 and NSN 4710-LN-003-3411, with a total quantity of six units required. The item must be delivered in full compliance with strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with palletization governed by RP001 DLA packaging requirements. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and the product is subject to inspection and acceptance at the destination point. Delivery is due within 84 days of contract award, with FOB destination terms applying and no variance permitted in quantity. The item is intended for delivery to Naval Air Station North Island in San Diego, California, and must be shipped to the designated DLA receiving facility at Naval Base Coronado. The solicitation number is SPEFA1-26-T-0260, issued by DLA Fleet Readiness Southwest under the Department of Defense, with a posted date of July 19, 2026, and a response deadline of July 27, 2026. The primary point of contact is Donnell Hall, reachable via phone and email. The purchase request number is 7017430946, and the unit price is $0, which implies a cost-free acquisition or that pricing is managed under a separate agreement. The item falls under NAICS code 331420 and is classified as a critical application item with multiple referenced technical and quality requirements including RA001, RP001, RQ017, ZD080, RS002, and RQ001. The original required delivery date is set for September 8, 2026, and the parcel post address and freight shipping address must be strictly followed to ensure proper logistics processing.

Copper Rolling, Drawing, Extruding, and Alloying

POSTED

5 days ago

DEADLINE

in 3 days

View Details