Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military-Compliant Packaging, Labeling, and Preservation

Active

Federal

Response Deadline08/18/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive packaging, preservation, labeling, and palletization of stator housings to meet exacting military standards including MIL-STD-129, ASTM D3951, and DLA RP001, ensuring full compatibility with Department of Defense logistics systems. All work must strictly adhere to these specifications to guarantee uniformity, traceability, and durability during transportation and long-term storage in defense supply chains. The requirement is structured as a subcontract set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, reflecting a commitment to supporting small business participation in defense logistics. The NAICS code 493190 applies, indicating the scope involves warehousing and storage activities tied to logistics support. The solicitation was posted on August 3, 2026, with proposals due by August 18, 2026, under the Strategic Acquisition Program Directorate of the Department of Defense. Performance is expected to align with DoD-wide logistics integration protocols, though the precise location of performance is not specified. Interested parties must respond through the DIBBS portal using the referenced solicitation number SPE7LX26U9186, ensuring submissions comply with all technical, procedural, and regulatory mandates outlined in the referenced standards.

General Info

Small business subcontract for military-grade stator housing packaging per MIL-STD-129, ASTM D3951, DLA RP001.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

493190 - Other Warehousing and StorageView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Packaging, preservation, labeling, and palletization of stator housings in compliance with MIL-STD-129, ASTM D3951, and DLA RP001 for DoD logistics integration.

Similar Contracts

Same NAICS industry code

Packaging, Preservation, and Military Shipment LabelingThe contract requires the provision of military-compliant packaging, preservation, and labeling services adhering to MIL-STD-129 and ASTM D3951 standards. This includes the use of desiccants to control moisture, vapor corrosion inhibitors to prevent metal degradation, and bar-coded labels for accurate tracking and inventory management throughout the supply chain. All work must meet stringent Department of Defense requirements for durability, environmental protection, and logistical traceability during storage and transit. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a NAICS code of 493190 indicating it relates to other warehousing and storage activities. The solicitation was posted on August 4, 2026, and the place of performance and point of contact details are unspecified. The contract is administered through the DIBBS system with the award identification SPE7M326V3919, and the work is intended to support military shipment operations requiring rigorous packaging and labeling compliance.

Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

SHIPPING AND STORAG

Solicitation # SPE8ED-26-Q-0634

The contract pertains to the procurement of a single shipping and storage container identified by NSN 8145-01-653-0503 and part number 11214-17994-0100, manufactured by HARDIGG INDUSTRIES LLC, with delivery required within 90 days after award. The pricing is firm fixed price, with no variance allowed in quantity, and both inspection and acceptance occur at the destination. The item must be packaged in strict compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all packaging must be marked and labeled per MIL-STD-129. Palletization must adhere to RP001: DLA Packaging Requirements for Procurement. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes must be assigned verification levels VII, IV, and II respectively, with AQLs of 0.1, 1.0, and 4.0, and unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise specified. The delivery destination is RAAF Base Edinburgh, Australia, delivered via DHL Global Forwarding under specific government logistics directives, with transportation and shipment protocols governed by DLAD PROC NOTE C19 and C20. The contract was issued under SPE8ED-26-Q-0634, with a solicitation posting date of August 4, 2026, and a response deadline of August 13, 2026, and the item is destined for government use with a required ship date of January 8, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 13 hours ago

DEADLINE

Packaging, Labeling, and BarcodingThe contract entails the secure packaging of devices using protective materials to ensure safe handling and transportation, along with precise labeling in accordance with agency-specific requirements such as asset tags and user assignments. Barcoding is a critical component, implemented to enable accurate and efficient inventory tracking throughout the supply chain. The work is classified as a subcontract under NAICS code 493190, assigned by the Government of Jamaica through its JCA Project and Initiatives Implementation office. The solicitation was posted on August 4, 2026, and the performance location details are not specified, indicating potential flexibility in execution across Jamaica. All activities must comply with government standards for documentation and asset management, with no set-aside provisions indicated. The contract's UI link provides access to additional procedural details for qualified subcontractors.

JCA Project and Initiatives Implementation

POSTED

about 16 hours ago

DEADLINE

Kitting, Packaging, and Logistics CoordinationThe contract involves assembling books and crayons into educational kits as needed, packaging them securely for shipment, and coordinating the final delivery to the Chickasaw Nation, with all activities required to be completed by the end of August 2026. Tracking information and proof of delivery must be provided to ensure accountability and confirmation of receipt. The work falls under the NAICS code 493190, indicating it is a subcontract related to other warehousing and storage services. The solicitation was posted on August 4, 2026, with responses due by August 7, 2026, and the performance location is tied to the Chickasaw Nation, though specific address details are not provided. All logistics, from kit assembly to final delivery, must be executed to meet the deadline and compliance requirements set by the Chickasaw Nation.

Chickasaw Nation

POSTED

about 17 hours ago

DEADLINE

Preservation, Packaging, and Shipping ServicesThe contract requires full compliance with military standards for the preservation, packaging, labeling, and shipping of manufactured canopies, ensuring they remain protected and mission-ready throughout handling and transit. All processes must include climate-controlled storage to maintain environmental integrity and prepare items for immediate operational deployment, with strict adherence to defense logistics protocols for packaging materials, labeling formats, and transport readiness. The work involves end-to-end logistics support from final production through delivery, with no tolerance for deviations from established military specifications. This subcontract is managed by the Department of Defense through DLA Aviation under NAICS code 493190, and responses are due by August 11, 2026. Performance is expected to meet the rigorous demands of military supply chains, with all activities oriented toward ensuring canopies are stored and shipped in a state of immediate usability under adverse conditions. While the place of performance and point of contact details are not specified, the requirement implies nationwide or global logistics coordination as needed to support defense operations.

POSTED

about 18 hours ago

DEADLINE

Packaging, Certification, and Logistics for Analytical StandardsThe contract requires comprehensive final packaging, cold chain logistics, certificate of analysis (COA) management, and secure shipment of analytical reference standards to the FDA Denver Laboratory, ensuring all materials maintain their integrity through transit via dry ice or cold packs. The work must adhere to strict temperature controls and documentation standards to meet regulatory requirements, with all packaging and labeling protocols designed to support the stability and traceability of the standards during transport. This subcontract, issued under the NAICS code 493190 by the FDA Office of Acquisition and Grant Services within the Department of Health and Human Services, is targeted for performance at the Denver 80225 location. The solicitation was posted on August 4, 2026, with responses due by August 7, 2026, and no set-aside type has been designated. The scope demands precision in handling, certification, and delivery, with full accountability throughout the process to ensure compliance with federal laboratory standards for analytical reference materials.

FDA Office Of Acq Grant Svcs

POSTED

about 18 hours ago

DEADLINE

Secure Logistics and Domestic Supply Chain ManagementThe contract governs the secure handling, packaging, and domestic transportation of sensitive components, requiring strict adherence to an unbroken chain-of-custody protocol and full compliance with origin verification standards to ensure integrity and authenticity throughout the supply chain. All activities must be conducted under rigorous security protocols to safeguard against tampering, loss, or unauthorized access during transit and storage. The contract is classified as a subcontract under NAICS code 493190 and is issued by the Aviation Logistics Center under the Department of Homeland Security, with responses due by August 6, 2026. Performance is expected to occur within domestic boundaries, though specific locations are not detailed. The solicitation does not specify set-aside status or point of contact, and interested parties must submit proposals through the official SAM.gov platform before the deadline.

Aviation Logistics Center (ALC)(00038)

POSTED

about 18 hours ago

DEADLINE

Packaging, Labeling, and Logistics SupportThe contract entails the final packaging, barcoding, preservation, and shipping of components in full compliance with Defense Logistics Agency specifications and federal standards for marking and electronic shipping systems. All activities must adhere to exacting federal requirements to ensure proper identification, traceability, and logistics readiness across the defense supply chain. The work is performed under a subcontract for the Department of Defense, with the North American Industry Classification System code 493190 indicating it falls under other support activities for transportation. The performance location is not specified, and the contract is linked to the DIBBS system under award number SPE7MX20D0003 with delivery order SPE7M126F1548, indicating it is part of a broader logistics support framework managed by the DLA.

Defense Logistics Agency

POSTED

DEADLINE

DLA Contract Packaging & Marking ServicesThe contract requires comprehensive packaging, preservation, and labeling services fully compliant with MIL-STD-129 and FED-STD-313 standards for military logistics distribution, ensuring all items are properly prepared for secure, standardized handling across the Department of Defense supply chain. This includes precise NSN labeling and preservation methods that meet rigorous durability and environmental protection requirements to maintain readiness and operational integrity during transit and storage. The solicitation is structured as a subcontract under the ACTIVE DEVICES DIVISION of the Department of Defense, with performance specifically required at NEW CUMBERLAND, PA, 17070-5002. Interested parties must submit responses by August 14, 2026, following a posting date of August 3, 2026. The NAICS code 493190 identifies the service category as Other Support Activities for Transportation, reflecting the specialized nature of military packaging logistics. The contract is not set aside for any specific small business category, and full compliance with all regulatory and technical specifications is mandatory for participation.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

MIL-STD-129 Packaging, Labeling & Marking Services

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Labeling, and Military Shipment PreparationThe contract requires full compliance with military standards for the packaging, labeling, and shipment preparation of hose clamps, specifically adhering to MIL-STD-129 and Defense Logistics Agency guidelines. This includes the application of hazard warning labels, precise barcoding, and all associated documentation necessary for military logistics operations. The work must be executed to ensure seamless integration into Department of Defense supply chains, with strict attention to detail in labeling accuracy, material suitability, and shipment readiness. Performance is mandated at Fort Hood, Texas, with a submission deadline of August 14, 2026, and the solicitation falls under NAICS code 493190 for other transportation support activities. The contract is structured as a subcontract under the Fluid Handling Division of the Department of Defense, and while no set-aside classification is specified, all bidders must demonstrate proven capability in executing military-grade packaging and labeling procedures. The solicitation is accessible via the DIBBS portal and requires full alignment with federal defense supply protocols.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and PalletizationThe contract requires the preservation, packaging, and palletization of aluminum tubing in strict compliance with MIL-STD-2073-1E, ASTM B660, and DLA RP001 standards for military shipment, ensuring the materials are protected against environmental damage and ready for secure transport. All work must adhere to federal specifications governing defense logistics, including proper labeling, material handling, and pallet configurations to meet military readiness requirements. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the packaging operations must be conducted. This is a small business set-aside subcontract under the SBA program, meaning only eligible small businesses may submit proposals, and it is classified under NAICS code 493190 for warehousing and storage. The solicitation was posted on August 3, 2026, with a firm response deadline of August 14, 2026, providing a limited window for qualified vendors to submit bids. The contracting activity originates from the Fluid Handling Division within the Department of Defense, emphasizing the critical nature of the work to defense logistics operations. Bidders must ensure their facilities and processes meet all military packaging compliance benchmarks to be considered for award.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

FILTER ELEMENT, INTA

Solicitation # SPE7LX-26-U-9232

The contract is for the procurement of a filter element, intake, identified by NSN 2940-01-566-5009 and part number 87682999, with a quantity of 551 units, each priced at $551.00 for a total value of $303,601.00. The delivery is FOB origin with a 74-day lead time, and the quantity has zero variance tolerance—no overages or underages are permitted. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization adhering strictly to DLA Packaging Requirements. The DLA Master List of Technical and Quality Requirements takes precedence over any other standards, including ASTM D3951. The item is classified under a total small business set-aside with NAICS code 333618, and the solicitation is issued under SPE7LX-26-U-9232, with a response deadline of August 19, 2026. The contract emphasizes that the listed quantity is an estimate and may not be fully purchased by the IDC. All documentation and requirements referenced through R and I numbers are incorporated by reference from the DLA Master List, accessible via the official DLA website. The primary point of contact is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.

Other Engine Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9225

This contract is for the procurement of 591 units of a V-belt, cogged or notched, identified by NSN 3030-00-294-9785 and part number AX56, sourced from approved suppliers including Gates Corporation, Dayco Products Inc, and Contitech USA Inc. The item is covered under DLA Direct, CONUS, with a total price of $591.00 at $1.00 per unit, and delivery is required within 70 days FOB origin. The quantity is fixed with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and fully adhere to MIL-STD-129 for marking and labeling, with palletization following DLA Packaging Requirements RP001. All technical and quality requirements referenced by R or I numbers in the DLA Master List of Technical and Quality Requirements supersede any other standards. The solicitation is a total small business set-aside under NAICS code 326220, issued under contract number SPE7LX-26-U-9225, with a response deadline of August 19, 2026, and a posted date of August 4, 2026. The primary point of contact is Theodore Misiolek of the Strategic Acquisition Program Directorate, Department of Defense.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 13 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7LX-26-U-9223

This contract is for the procurement of 724 fluid filter elements with NSN 4330015342361 and part number 19431541 under solicitation SPE7LX-26-U-9223, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The requirement is a total small business set-aside under NAICS code 333998, with delivery due within 78 days from the award date and FOB origin terms. The entire quantity must be delivered in exact accordance with the specified 724 units, as zero variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA’s RP001 packaging requirements, and all technical and quality specifications referenced by R or I numbers from the DLA Master List take precedence over any other standard. The unit of issue is each, and all packaging must be properly marked and labeled for government identification as per contractual directives. Inspection and acceptance occur at destination. The contract stipulates that government identification must be removed from any non-accepted supplies, and the supplier must adhere strictly to DLA’s packaging and handling protocols. The point of contact for inquiries is Theodore Misiolek, with contact information provided. This solicitation, posted on August 4, 2026, with a response deadline of August 19, 2026, is managed through the DIBBS platform, and the DLA’s authoritative technical and quality requirements—effective as of the solicitation or award date depending on acquisition size—govern all aspects of compliance. The estimated quantity noted does not guarantee purchase by the IDC, but the awarded contract requires exact fulfillment of 724 units with no adjustment allowed. All deliverables must be presented in accordance with the specified unit of issue and packaging data QUP:001, fully aligned with DLA’s procurement directives.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

INNER TUBE, PNEUMATIC T

Solicitation # SPE7LX-26-U-9224

This contract specifies the procurement of 2,543 pneumatic vehicle inner tubes with the size designation 06.90/6.00-9 and TR135 valve, configured as off-center. Each tube must be partially inflated and folded to minimize sharp creases and treated with powdered soapstone, talc, or an approved substitute to prevent rubber-to-rubber adhesion. The valve stem must be protected from damage by non-corrosive material. The item is classified as a commercial item and falls under the Defense Logistics Agency’s packaging and technical requirements, including compliance with MIL-STD-2073-1E for preservation and MIL-STD-129 for marking. Shelf life is strictly 60 months and non-extendable, with special marking code 32 indicating Type I shelf-life status. Mercury and mercury-containing compounds are prohibited in the product, packaging, preservation, or marking except for approved functional uses like specific batteries or instruments, with portable devices requiring shockproof construction and a secondary containment boundary. Ozone-depleting chemicals are entirely banned. The item is identified by NSN 2610-00-089-5997 and must conform to the technical standard ZZ-I-550 Revision F dated 10/21/1992. Delivery is FOB destination within 41 days with zero variance allowed on quantity. Inspection and acceptance occur at origin. The contract is a total small business set-aside under NAICS code 326211 and is managed by the Department of Defense’s Strategic Acquisition Program Directorate with Theodore Misiolek as the primary point of contact.

Tire Manufacturing (except Retreading)

POSTED

about 13 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7LX-26-U-9230

This contract requires the supply of a fluid filter element with a minimum filtration rating of 20 microns, designated by NSN 2910-01-502-6539 and part number FS1251 from Cummins Filtration Inc, under solicitation SPE7LX-26-U-9230. A total of 4,870 units must be delivered within 71 days FOB origin, with no variance permitted in quantity. The item is classified as a critical application and restricted source, mandating government engineering source approval prior to procurement. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue date for simplified acquisitions. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, with marking adhering to MIL-STD-129. The use of Class I ozone-depleting chemicals is strictly prohibited, and mercury or mercury-containing compounds are banned unless explicitly exempted for specific functional components such as certain batteries, instruments, or controls, with additional containment requirements for portable mercury devices. Configuration changes require formal engineering change proposals or variance requests, and covered defense information provisions apply. The contract is a total small business set-aside under NAICS code 336390, with Theodore Misiolek as the primary point of contact.

Other Motor Vehicle Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

GAGE, TIRE PRESSURE,

Solicitation # SPE7LX-26-U-9226

This contract specifies the procurement of tire pressure gages meeting strict technical and packaging requirements under the Department of Defense’s DLA system. The gages must have an inflation range of 10 to 160 PSIG, feature a dual-chuck design with a long extension and external indicating capability, and adhere to the Commercial Item Description for self-contained and inflator gages for pneumatic tires. The indicator bar must be at least .250 inches square with calibrated graduations on all four sides: inch-pound markings in 2 PSI increments every 10 PSI from 10 to 160 PSIG in black, and metric markings in 20 KPa increments every 100 KPa from 80 to 1100 KPa in red, ensuring readability when held with the dual chuck upward. The gages must be constructed of corrosion-resistant materials such as stainless steel or brass, and are designated as a critical application item. All components must comply with DLA Master List technical requirements referenced by R and I numbers, and sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, even when using MIL-STD-105/ASQ Z1.4 for lot size determination. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the gages or their contact surfaces, except for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, wrapping, and storage codes, and marking must follow MIL-STD-129 without special markings. The product is identified by NSN 4910-00-204-3170 and part number AA59568-002-B-3, with a required delivery in 116 days FOB origin, a quantity of 1,187 units, and zero variance allowed. Procurement is under a Service-Disabled Veteran-Owned Small Business Set-Aside, with inspection and acceptance occurring at destination, and all preservation, packaging, and marking activities strictly exclude mercury or mercury compounds.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

CYLINDER ASSEMBLY, ACTU

Solicitation # SPE7LX-26-U-9235

The contract is for the procurement of 60 units of a linear actuating cylinder assembly identified by NSN 3040-01-572-7391 under solicitation SPE7LX-26-U-9235, issued by the Defense Logistics Agency’s Strategic Acquisitions Program Directorate. The requirement is a total small business set-aside under NAICS code 333613, with a 598-day delivery timeline and a response deadline of August 19, 2026. The item is subject to stringent technical and quality controls, including mandatory compliance with DLA’s Master List of Technical and Quality Requirements, export control regulations under ITAR or EAR, and restrictions on the use of ozone-depleting chemicals. Technical data associated with this item is classified as export-controlled and may only be accessed by contractors with approved U.S./Canada Joint Certification Program credentials, completion of DLA-specific training, and formal authorization. Configuration changes require formal engineering change proposals, and components must be sourced from qualified products or manufacturers listed per procurement note H02. Additionally, all supplies must adhere to DLA packaging standards, and government identification must be removed from non-accepted items. Cybersecurity requirements include CMMC Level 2 certification for any third-party assessors involved.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

FILTER ELEMENT, INTAKE

Solicitation # SPE7LX-26-U-9236

This contract specifies the procurement of a filter element for an intake air cleaner, designated by NSN 2940-00-934-7989, with a requirement for 2,564 units under solicitation SPE7LX-26-U-9236. The item is classified as a critical application component used on a 3 KW, 1800 RPM diesel generator unit and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award dates depending on acquisition size. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the equipment, except for specific exemptions such as batteries, fluorescent lights, instruments, sensors, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. A list of approved part numbers from multiple qualified suppliers including Baldwin Filters, Donaldson, Cummins Filtration, WIX, and others is provided, ensuring sourcing flexibility while maintaining technical compliance. Delivery is required FOB origin within 62 days of contract award, with no variance allowed in quantity — exactly 2,564 units must be furnished. Inspection and acceptance occur at the destination, and packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging requirements, including the use of Unit of Issue code 001, preservation method 10, and marking in accordance with MIL-STD-129, with no special marking codes applied. Palletization must follow RP001 specifications, and all units must be properly labeled and prepared for transport. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 336390, with Theodore Misiolek listed as the primary point of contact for inquiries. The contract does not guarantee purchase of the estimated quantity by the IDC, and all items must be furnished without government identification if rejected.

Other Motor Vehicle Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9227

This contract pertains to the procurement of a V-belt with NSN 3030-00-160-8285 and part number A27, supplied by CONTITECH USA, INC, under solicitation SPE7LX-26-U-9227. The requirement is for 1,052 units to be delivered FOB origin within 56 days, with no variance allowed in quantity. The item is classified as a Type I shelf-life item with a non-extendable shelf life of 84 months, and at least 71 months of shelf life must remain upon delivery. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 indicating Type I shelf life, and palletization must meet DLA packaging standards. The contract explicitly prohibits the use of ozone-depleting chemicals and mercury or mercury-containing compounds in the product, preservation, packaging, or marking, with limited exceptions for functional mercury in specific applications such as batteries, fluorescent lights, and weapon systems, provided they meet additional containment requirements. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and for this simplified acquisition, the version in effect on the solicitation issue date applies. The contract is a Total Small Business Set-Aside under NAICS code 326220, with Theodore Misiolek designated as the primary point of contact for inquiries.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 13 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7LX-26-U-9234

This contract is for the procurement of fluid filter elements identified as a commercial off-the-shelf item with the NSN 2940-01-567-4003 and an estimated quantity of 724 units. The item is sourced from multiple commercial manufacturers including JCB Inc., Deere & Company, Hitachi Construction Machinery, Vanderfield Pty Ltd DBA, Baldwin Filters Inc., Hastings Filters Inc., and Wix Corp., all of which produce equivalent part numbers such as AT468647, BT9422, HF1019, and WL10186. The contract falls under DLA Direct, CONUS coverage and requires delivery within 62 days FOB origin with zero percent quantity variance permitted. Inspection and acceptance occur at the destination point. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling and adhere to DLA Packaging Requirements for Procurement, including palletization standards outlined in RP001. The unit of issue is each, with a unit price of $724.00 for a total price of $524,576.00. The solicitation, numbered SPE7LX-26-U-9234, was issued as a Women-Owned Small Business Set-Aside under NAICS code 336390, with responses due by August 19, 2026. Primary point of contact is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.

Other Motor Vehicle Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE7LX-26-U-9222

This contract specifies the procurement of a helical compression spring identified by NSN 5360-00-936-2706 and part number 2572772, with a quantity of seven units to be delivered within 99 days FOB origin. The item is supplied by ONTIC ENGINEERING & MANUFACTURING, INC and is covered under DLA Direct, CONUS. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date oraward date depending on acquisition size. The spring is not subject to shelf life restrictions and does not require Item Unique Identification. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality defined in relevant documents. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required and palletization aligned with DLA packaging standards that prioritize reduction of plastic use without compromising protection. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The unit of issue is each, and the total price is based on a unit price of $7.00. The contract is issued under solicitation SPE7LX-26-U-9222 with a response deadline of August 19, 2026.

Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

CONTROL ASSEMBLY, TRANS

Solicitation # SPE7LX-26-U-9233

The contract pertains to the procurement of 317 units of a CONTROL ASSEMBLY, TRANSMISSION with NSN 2520-01-554-9359 under solicitation SPE7LX-26-U-9233, with a delivery requirement of 52 days ADO. The item is governed by source-controlled drawings, meaning only approved sources listed on the drawing are currently authorized, though additional qualified sources may exist and must be validated through the cognizant design activity. The contract incorporates stringent technical and quality requirements from the DLA Master List, and all supplies must strictly comply with the cited drawing specifications regardless of part number or supplier. Additional requirements include adherence to DLA packaging standards, removal of government identification from non-accepted supplies, and configuration change management through engineering change proposals or variance requests. The item is subject to export control under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer of technical data to foreign persons, including employees or subsidiaries, and DFARS 252.225-7048 applies. Access to export-controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD training, and DLA authorization. The solicitation mandates CMMC Level 2 certification for third-party assessors and incorporates covered defense information protocols. The contract is issued under NAICS code 336350 by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact, and responses are due by August 19, 2026.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE