Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military-Grade Packaging and Marking Services

Active

Federal

Response Deadline10/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Military-Grade Packaging and Marking Services supports prime contractors on DLA and Air Force projects, specifically operating out of Tinker AFB. The scope of work involves the preservation, packaging, and marking of materials in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001: DLA Pack. Additionally, the contractor must apply preservation per MIL-DTL-28786 and ensure all hazardous materials are labeled according to 29 CFR 1910.1200 using approved MIL-SPEC cushioning and containers. The objective is to deliver fully packaged and palletized shipments prepared for FOB Origin delivery. This opportunity is managed by the Electrical Devices Division of the Department of Defense under NAICS code 493110. Responses are due by October 9, 2026.

General Info

Military-grade packaging and marking services for DLA and Air Force at Tinker AFB.

Agency

Department Of Defense → ELECTRICAL DEVICES DIV

NAICS

493110 - General Warehousing and Storage

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M8-26-T-6941.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SWITCH, PRESSURE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 28

subcontract

Response DeadlineOct 9

Submission deadline

Response Deadline

10/09/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs preservation, packaging, and marking for prime contractors on DLA/Air Force projects. Executes packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001: DLA Pack. Applies preservation per MIL-DTL-28786 and labels hazardous materials per 29 CFR 1910.1200 using MIL-SPEC cushioning and containers. Delivers packaged and palletized shipments ready for FOB Origin delivery.

Similar Contracts

Same NAICS industry code

Military-Grade Packaging and Palletization Services

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

MIL-STD-129 Compliant Packaging and PalletizationThis subcontract for the Department of Defense Fluid Handling Division involves specialized marking, labeling, and palletization services for prime contractors. The scope of work requires strict adherence to MIL-STD-129 for container labeling and RP001 DLA Packaging Requirements for palletization, including the application of Special Marking Code 37 for fragile items. All services must utilize DLA-approved materials and compliant labeling systems to ensure shipments are ready for transport. The opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 493110. Performance will take place in Tracy, California. Interested parties must respond by October 9, 2026, to be considered for this specialized logistics support contract.

FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

Military Packaging and Marking ServicesThis subcontract for Military Packaging and Marking Services, managed by the Department of Defense under LSO Combat Vehicles and Armament, involves specialized military-grade packaging, labeling, and palletization for prime contractors delivering DLA supply contracts. The service provider is responsible for packaging aircraft components according to RP001 and ASTM D3951 standards and ensuring all shipments and storage containers are marked per MIL-STD-129. The contractor must utilize military-spec packaging materials and compliant labeling systems to deliver assemblies ready for First Destination Transportation. This work is performed in Mason City, Iowa, under NAICS code 493110, with a response deadline of October 9, 2026.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 11 hours ago

DEADLINE

Cold and Dry Food Warehousing ServicesThe Cold and Dry Food Warehousing Services subcontract is issued by the Boston Public Schools Food and Nutrition Department to secure continuous storage for frozen and dry food items. The selected provider must maintain temperature-controlled environments using industrial freezers and cold storage warehouses, ensuring secure and monitored inventory management. Compliance with food safety certifications, such as HACCP or FDA standards, is a mandatory requirement for this project. The performance of these services will take place in Roxbury on Washington Street. Interested parties must submit their responses by the deadline of October 13, 2026. This opportunity falls under NAICS code 493110 and is designed to support prime contractors in managing the food supply chain for the school district.

101 - Boston Public Schools

POSTED

about 11 hours ago

DEADLINE

Kitting and Packaging ProviderThis subcontract opportunity is for a kitting and packaging provider to support prime contractors on DLA Troop Support Medical Supply Chain projects for the Department of Defense. The selected provider will be responsible for assembling individual shaving kits consisting of one razor and one shaving cream, which must then be packaged into units of 25. All work must adhere to MIL-STD-2073-1E standards for preservation, packing, and marking. The project is designated as a Total Small Business Set-Aside under NAICS code 493110, with the place of performance located in Bethesda, Maryland. Interested parties must submit their responses by October 5, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 11 hours ago

DEADLINE

Medical Device Packaging and Distribution

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 11 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Land and Maritime supply contracts. The service provider is responsible for performing specialized packaging, marking, and palletization of items to ensure they are ready for DLA acceptance. All work must adhere to strict technical standards, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization, with additional HazMat labeling applied per 29 CFR 1910.1200 when necessary. The contract is managed under the Department of Defense within the Maritime Supply Chain agency, utilizing NAICS code 493110. Performance of these services will take place in Cherry Point, North Carolina. Interested parties must submit their responses by October 9, 2026.

MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Medical Grade Packaging and Shipping ServicesThis subcontract for Medical Grade Packaging and Shipping Services involves the commercial packaging, sealing, and marking of medical supplies, specifically surgical stockinet, for prime contractors fulfilling DLA supply contracts. The service provider must ensure all units are packaged in sealed containers and commercial exterior shipping containers adhering to ASTM D3951 standards, with marking performed according to Medical Marking Standard No. 1 using medical-grade equipment. Managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, the opportunity falls under NAICS code 493110. The solicitation was posted on September 28, 2026, with a response deadline of October 5, 2026. The primary objective is to deliver properly packaged and marked surgical stockinet that is fully prepared for final shipment.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 11 hours ago

DEADLINE

Medical Grade Packaging and Marking ServicesThis subcontract for Medical Grade Packaging and Marking Services supports prime contractors delivering to the Department of Defense Medical Supply Chain Pharm FSA. The service provider is responsible for the specialized packaging, sealing, and marking of medical supplies, ensuring all sealed unit containers and commercial exterior shipping containers comply with ASTM D3951. Additionally, the contractor must apply markings according to Medical Marking Standard No. 1 and execute palletization in accordance with RP001 DLA Packaging Requirements to ensure shipments are ready for government inspection. The project falls under NAICS code 493110 and is based in Williamsburg, Virginia. Interested parties must respond by October 5, 2026, following the posting date of September 28, 2026.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 11 hours ago

DEADLINE

Publication Storage and Shipping ServicesThis subcontract for Publication Storage and Shipping Services supports prime contractors on Iowa College Student Aid Commission projects by providing physical storage and logistics for printed materials. The service provider is responsible for managing order fulfillment and shipping to more than 200 participating high schools across Iowa, utilizing dedicated warehouse facilities and logistics management software. The scope of work includes integrating shipping activities with an online ordering system to ensure the efficient delivery of stored inventory and completed shipments to educational institutions. This opportunity is categorized under NAICS code 493110 and is managed by the state of Iowa, with a response deadline set for November 12, 2026.

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services is issued by the Department of Defense Land Supply Chain. The contractor is responsible for providing specialized marking, packaging, and palletization for 50 units intended for DLA supply contracts. All work must adhere to MIL-STD-129 for marking and RP001 for DLA packaging requirements, utilizing MIL-SPEC materials and industrial labeling equipment to ensure items are prepared for government shipment. The opportunity was posted on September 27, 2026, with a response deadline of October 8, 2026. It falls under NAICS code 493110 and is designed to support prime contractors in meeting strict military logistics and delivery standards.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Medical-Grade Packaging and Marking ServicesThis subcontract for Medical-Grade Packaging and Marking Services supports prime contractors delivering medical supplies to the Department of Defense under DLA supply contracts. The selected provider will be responsible for the specialized marking and packaging of medical supplies, ensuring all materials adhere to Medical Marking Standard No. 1. This process requires the use of specialized labeling equipment to preserve the integrity of FDA-regulated devices throughout the transit process. The primary objective is to deliver medical supplies that are properly marked and packaged for final government acceptance. This opportunity falls under NAICS code 493110 and is managed by the Medical Supply Chain MD Surg FSF. Interested parties must submit their responses by October 5, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

MIL-STD-129 Compliant Packaging and Palletization ServicesThis subcontract involves providing specialized marking, labeling, and palletization services for prime contractors fulfilling DLA supply contracts. The service provider is responsible for ensuring all packaging is marked and labeled in accordance with MIL-STD-129 and that palletization adheres to RP001 DLA Packaging Requirements for Procurement. Using MIL-STD compliant equipment, the provider must deliver shipments that are fully prepared and ready for government acceptance. The project is managed under the Department of Defense through the Electrical Devices Division and is categorized under NAICS code 561910. Performance of these services will take place in San Diego, California. The response deadline for this opportunity is October 9, 2026.

Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE

Supplier of Sensitive Switches (NSN 5930-01-419-1482)This subcontract involves the supply of two units of sensitive switch hardware, specifically identified by NSN 5930-01-419-1482, for prime contractors fulfilling DLA supply contracts. The supplier must be capable of providing aerospace and defense grade electronic components and is responsible for performing hazardous material determination according to FED-STD-313. The contract is managed by the Electrical Devices Division of the Department of Defense under NAICS code 334413. Performance is located in San Diego, California, with a response deadline of October 9, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Pressure Switches (NSN 5930-01-454-2094)This subcontract involves the supply of six specialized pressure switches under NSN 5930-01-454-2094 for prime contractors on DLA supply contracts. The required components must be manufactured or sourced according to specific part numbers from Northrop Grumman or Detroit Switch Inc and must adhere to Critical Application Item standards. Delivery is set as FOB Origin with performance taking place in New Cumberland, Pennsylvania. The contractor must ensure full compliance with NAVSEA 5100-003D regarding mercury and follow MIL-STD-2073-1E and MIL-STD-129 for all packaging requirements. This procurement falls under NAICS code 335311 and is managed by the Electrical Devices Division of the Department of Defense.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Push Switches (NSN 5930-01-162-7316)This subcontract involves the supply of 27 push switch components for prime contractors supporting the Department of Defense Electrical Devices Division. The manufacturer or source must ensure all units meet the technical specifications and packaging requirements associated with NSN 5930-01-162-7316. Additionally, any components produced through additive manufacturing must comply with the L31 Additive Manufacturing standards from June 2018. The contract is categorized under NAICS code 335311 and is designated for performance at Tinker AFB. Interested parties must adhere to the response deadline of October 9, 2026, following the posting date of September 28, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Push Switch (NSN 5930-01-395-9887)This subcontract involves the manufacture and supply of 8,000 push switch components under NSN 5930-01-395-9887 for prime contractors delivering to the Defense Logistics Agency. The work is performed under the Electrical Devices Division of the Department of Defense and is designated as a Total Small Business Set-Aside. Performance will take place in New Cumberland, Pennsylvania, with all components required to meet specific technical specifications. The contractor must adhere to strict packaging and marking standards per MIL-STD-129 and ensure full compliance with DFARS regulations regarding hexavalent chromium and export-controlled items. The solicitation was posted on September 28, 2026, with a response deadline of October 9, 2026, falling under NAICS code 335999.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

Military-Grade Packaging ServicesThis subcontract for Military-Grade Packaging Services, managed by the Department of Defense Electrical Devices Division, involves the preservation and packaging of switches for prime contractors on DLA supply contracts. The service provider is responsible for ensuring all switches are packaged using military-specification moisture barriers and cushioning in strict accordance with MIL-DTL-28786 and RP001 DLA packaging requirements. The final deliverable consists of preserved and packaged switches that are fully ready for shipment. The work is performed in Jacksonville, Florida, under NAICS code 488510. Interested parties must submit their responses by October 9, 2026, following the solicitation posted on September 28, 2026.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Sensitive Switch ManufacturingThis subcontract with the Department of Defense Electrical Devices Division involves the manufacture of sensitive switches for prime contractors under DLA supply contracts. The provider is responsible for fabricating switches identified by NSN 5930007252080, ensuring all components meet MIL-PRF-8805/29C Revision C and MIL-PRF-8805K Revision K specifications. Production must utilize tooling capable of adhering to the Technical Data Package Rev A Gen 1. To qualify, the manufacturer must maintain SAE AS9100 certification and strictly comply with all specified MIL-PRF standards. The work is designated for performance in Jacksonville, Florida, under NAICS code 334220. The response deadline for this opportunity is October 9, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Rotary Switches (NSN 5930-01-732-8856)This subcontract with the Department of Defense Electrical Devices Division requires the supply of 12,000 rotary switches meeting NSN 5930-01-732-8856 specifications. These components are intended for prime contractors supporting DLA Land and Maritime electrical device contracts. The successful provider must ensure all items are manufactured or sourced according to the specified national stock number and delivered within 90 days after the order is placed. Compliance is mandatory regarding the Buy American Act and DFARS 252.204-7012 cybersecurity standards. Additionally, all packaging and marking must adhere to MIL-STD-129 and MIL-STD-2073-1E regulations. The contract falls under NAICS code 335311 and is managed through the DIBBS procurement system.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Pull Switches (NSN 5930-01-032-4486)This subcontract involves the manufacture or sourcing of pull switches identified by NSN 5930-01-032-4486 for prime contractors delivering DLA supply contracts. The work is managed by the Department of Defense Electrical Devices Division and is designated as a Women-Owned Small Business Set-Aside. Performance will take place in New Cumberland, Pennsylvania, with all units required to meet the DLA Master List of Technical and Quality Requirements (RA001) and RP001 packaging standards. Quality assurance must be conducted via sampling according to MIL-STD-1916 or ASQ H1331 Table 1. The opportunity was posted on September 28, 2026, with a response deadline of October 9, 2026. The contract falls under NAICS code 561910 and requires the delivery of physical switch units packaged to specific DLA standards.

Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE

Manufacture of Pressure Switch (Critical Safety Item)This subcontract involves the manufacture of 28 pressure switch units under NSN 5930-00-121-4960 for the Department of Defense Electrical Devices Division. The contractor must fabricate these switches in accordance with MIL-DTL-9395/1F Revision F, MIL-DTL-9395L Revision L, and TDP Rev A Gen 1. Due to the nature of the components as Air Force Designated Critical Safety Items, the provider must comply with DFARS 252.204-7012 and maintain AS9100 certification. The project requires specialized precision machining and the use of specific testing rigs for calibration. Performance is centered at Tinker AFB, and the procurement falls under NAICS code 335931. Interested parties must respond by October 9, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Hydraulic Pressure Switches (NSN 5930-00-946-5399)This subcontract involves the supply of six hydraulic pressure switches, identified by NSN 5930-00-946-5399, for prime contractors working on Department of Defense projects within the DLA Land and Maritime Electrical Devices Division. The contractor is responsible for manufacturing or sourcing these components to meet Navy Critical Safety Item standards, ensuring all items are delivered to New Cumberland, Pennsylvania. Strict adherence to regulatory standards is required, including marking and labeling per MIL-STD-129 and hazardous material labeling according to 29 CFR 1910.1200 and Federal Standard No. 313. Additionally, the provider must maintain compliance with DFARS 252.204-7012. The opportunity is categorized under NAICS code 335311, with a response deadline of October 9, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Push Switch (P/N C739-6092)This subcontract involves the supply of Push Switch P/N C739-6092 for prime contractors under Defense Logistics Agency supply contracts. The provider is responsible for manufacturing or sourcing components that meet the specifications of DGL Tech Inc, Brighton Cromwell LLC, and Essex Electro Engineers Inc. All deliverables must be packaged and labeled according to MIL-STD-129, with non-hazardous items following ASTM D3951 and hazardous items adhering to TQ IP025. The contract is managed by the Electrical Devices Division of the Department of Defense, with the place of performance located in Norfolk, Virginia. The solicitation was posted on September 28, 2026, with a response deadline of October 9, 2026. This procurement falls under NAICS code 335313 for the manufacture of electrical panels and assemblies.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS