Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Grade Packaging and Preservation

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the precise packaging and preservation of pistons in full compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring military-grade protection and traceability throughout the supply chain. All items must be secured using FOL containers, GC film, and JC dunnage, with accurate NSN and barcode labeling applied to meet stringent Department of Defense requirements. The work is to be performed at the NEW CUMBERLAND location with a zip code of 17070-5002, and all processes must align with the specified environmental and handling protocols to maintain part integrity and readiness for long-term storage or deployment. This is a subcontract opportunity set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under the SDVOSBC classification, with a NAICS code of 423840 representing wholesale trade of motor vehicle parts and supplies. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026, through the DIBBS platform. The contracting activity is managed by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, indicating direct support for military logistics and equipment sustainment operations.

General Info

SDVOSB subcontract for MIL-STD packaged pistons at New Cumberland, due August 3, 2026, via DIBBS.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

423840 - Industrial Supplies Merchant WholesalersView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Package and preserve pistons per MIL-STD-2073-1E and MIL-STD-129 using FOL containers, GC film, JC dunnage, and proper NSN/barcode marking.

Similar Contracts

Same NAICS industry code

Spare Parts and Maintenance Support PackageA two-year spare parts and maintenance support package is being procured to ensure continued operational readiness of the mini crane system, covering critical components such as hydraulic parts, filters, sensors, and wearable items. The contract requires comprehensive logistics and documentation support to facilitate timely replacement and service, minimizing downtime and maintaining equipment performance standards. This subcontract is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, aligned with NAICS code 423840 for commercial equipment rental and leasing services. The solicitation was posted on July 24, 2026, with responses due by August 7, 2026, and the performance location is designated as Cannon AFB, with a zip code of 88103. The contracting activity falls under the Department of Defense, specifically the FA4855 27 Socons Lgc office.

FA4855 27 Socons Lgc

POSTED

DEADLINE

Safety and Protection Equipment SupplyThe contract is for the supply of temporary protective and safety equipment required for window re-caulking operations at Scott Air Force Base, with delivery required to support military facility maintenance activities. Items include drop cloths, masking tape, barriers, ladders, and personal protective equipment, all necessary to ensure worker safety and site protection during the caulking process. The procurement is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses are eligible to bid, and it is classified under NAICS code 423840 for building material and supplies merchant wholesalers. The solicitation was posted on July 24, 2026, with responses due by August 14, 2026, by 6:00 PM. Performances will be carried out entirely at Scott Air Force Base, with a zip code of 62225. The contracting activity is under the Department of Defense, specifically the W7M6 Uspfo Activity Ilang 126 office. While no point of contact is listed, the opportunity is accessible through the official SAM.gov portal for interested small businesses to review details and submit proposals.

W7M6 Uspfo Activity Ilang 126

POSTED

DEADLINE

Purchase of Wire Cable, Clips and LubricantThe U.S. Army Corps of Engineers - Vicksburg District plans to award a sole source supply order to Certex USA Inc. under CAGE Code 1K772 for the purchase of specialized wire rope, clips, and lubricant needed to repair the gatehouse at Arkabutla Dam. The required items include 2,150 feet of 1-inch DYFORM 8 HPS RRL wire rope cut into sections of 750 feet and 650 feet, equipped with a wire rope warning tag, along with twelve 1-inch G-450 wire rope clips and twelve five-gallon containers of Vitalife wire rope lubricant. All supplies will be delivered to and inspected at 5500 Arkabutla Dam Road, Hernando, Mississippi, 38632. Although this procurement is not an RFQ and no formal solicitation is issued, any company or individual confident it can meet the requirements may submit a capabilities statement via email before 5:00 PM CST on August 3, 2026. The government retains full discretion to decide not to open the procurement to competition, and no phone inquiries will be accepted; all correspondence must be directed to Afton Riles at Afton.Riles@usace.army.mil.

Endist Vicksburg

POSTED

DEADLINE

Multiple Victoria-Class Spares: Valve, O-ring, Lamp, Connector, BushThe Department of National Defence is seeking suppliers to provide a range of spare parts for the Victoria-class submarines and related systems, to be delivered to Canadian Forces Base Esquimalt and Canadian Forces Base Halifax. The requirement includes 22 distinct items, such as contract strips, adjustable brass valves, O-rings, fluorescent lamps, fluid pressure line connectors, bushings, metal plates, lubrication fittings, machine bolts, clamping rings, and gland housings, with quantities ranging from one to fifty units per item. Each item is identified by its GSIN, NSN, part number, and NCAGE code, with some items having multiple part numbers listed for reference. Deliveries are split between the two bases, with most items requiring equal distribution, though a few have asymmetric quantities. For any proposed equivalent or substitute products, bidders must clearly specify the brand, model, part number, and NCAGE code. Technical data or drawings must accompany the metal plate items. Bids must be submitted by September 9, 2026, and all documentation may be provided in either English or French. The Crown reserves the right to negotiate with suppliers, and the primary point of contact for this solicitation is Tiehan Zhang, Contracting Authority.

Department of National Defence

POSTED

DEADLINE

in about 2 months

Specialized Wildlife Control Equipment SupplyThe contract is for the supply of specialized non-lethal bird deterrent equipment to support wildlife management operations at Dallas Fort Worth International Airport. The required equipment includes pyrotechnics, distress call systems, reflective tape, and exclusion netting, all intended to discourage bird activity near runways and other critical airport zones without harming wildlife. This subcontract is part of ongoing efforts to ensure aviation safety by mitigating the risk of bird-aircraft collisions through proven, humane methods. The solicitation was posted on July 23, 2026, with a response deadline of August 6, 2026, and is classified under NAICS code 423840, which pertains to commercial equipment rental and leasing. The award will be managed by DFW International Airport in Texas without any specified set-aside requirements or restrictions regarding vendor size or classification. All equipment must meet operational standards suitable for high-traffic airport environments and be delivered for immediate deployment in airport wildlife control programs.

Dfw International Airport

POSTED

DEADLINE

Packaging and Palletization ServicesThe contract requires the provision of compliant packaging, labeling, and palletization services for splash guards in accordance with DLA standards RP001 and applicable hazardous material regulations such as FED-STD-313 or commercial standards like ASTM D3951. All work must ensure full regulatory compliance throughout the packaging process, from material handling to final unit preparation for shipment, with strict adherence to military and industry specifications for safety, durability, and identification. The services are tailored to support defense logistics requirements and must be delivered with precision to meet quality and traceability expectations. This is a total small business set-aside subcontract under NAICS code 423840, issued by the Strategic Acquisition Program Directorate within the Department of Defense. The solicitation was posted on July 23, 2026, with a response deadline of July 28, 2026, and is accessible via the DIBBS platform. Performance location details are not specified, but the work is expected to align with federal defense supply chain protocols. The contract emphasizes small business participation and demands full compliance with all applicable standards without exception.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

HOSE ASSEMBLY, NONMEThe contract pertains to the procurement of four hose assemblies, nonmechanical, designated by NSN 4210015180981 and part number 1212149-50, supplied by PIERCE MANUFACTURING INC, with a unit price of $4.00 per unit and a total value of $16.00 for the full quantity. Delivery is required within ten days from the contract award date, with FOB origin terms, and both inspection and acceptance occur at the destination point. The quantity is fixed with zero variance allowed. Packaging must comply with DLA’s master list of technical and quality requirements, which supersede ASTM D3951, and all items must be marked and labeled per MIL-STD-129. If the material is hazardous per FED-STD-313, it must be packaged according to IP025; otherwise, commercial packaging in compliance with ASTM D3951 is required. Palletization must adhere to RP001, DLA packaging requirements. The destination for delivery is W5155M, Leutsestraat 34, Zutendaal 3690, Belgium, with the required delivery date set for July 21, 2026. The contract reference number is SPE8E6-26-T-3849, and all transportation details must follow DLAD procedural notes C19 and C20. The unit of issue is each, with one unit per pack, and all information must align with DoD’s authorized unit of issue standards.

Defense Logistics Agency

POSTED

DEADLINE

BEARINGS, BELTS AND DRIVE PARTSThe Trinity River Authority of Texas is seeking bids for its annual supply of bearings, belts, and drive parts under solicitation number 4450-024-I-27, with bids due on August 12, 2026, at 12:00 PM CST. The procurement is conducted through an online portal, requiring all respondents to register and submit their bids electronically; no physical submissions are accepted. The contract is open to both resident and nonresident vendors, but all bidders must comply with Texas-specific certifications including Resident Bidder Certification, HUB Status Certification, Conflict of Interest Disclosure, Boycott of Israel Compliance, Prohibition on Discrimination Against Firearm Entities, and Sanctions List Compliance under Texas Government Code sections 2252, 2270, 176, 808, 809, and 2274. While no federal FAR clauses apply, the solicitation enforces state-mandated legal obligations that bind offerors upon submission. All individuals seeking access to the secured facility for pre-bid or bid-opening events must register at least 24 hours in advance and present a valid government-issued photo ID; only specific forms of identification are accepted, ranging from Texas driver’s licenses and U.S. passports to military IDs and permanent resident cards. The place of performance is limited to the state of Texas, though no FOB terms, delivery schedule, or packaging specifications are outlined. The contract type, estimated value, pricing details, and evaluation factors are not provided, and no technical specifications for the parts are included beyond the general category of bearings, belts, and drive components. Awards will be determined based on compliance with state certification requirements and procedural adherence, as no formal criteria for price, quality, or technical merit are disclosed. The primary point of contact for inquiries is Joel Perez at pierzj@trinityra.org.

Trinity River Authority of Texas

POSTED

DEADLINE

HSEMA- Miscellaneous Goods & ServicesThe Homeland Security and Emergency Management Agency (HSEMA) is seeking vendors to supply equipment and supplies necessary for activating and sustaining emergency operations through its Emergency Operations Center. This contract is designed to ensure rapid procurement of critical resources during times of crisis, supporting the District of Columbia’s ability to respond effectively to emergencies. The scope includes flexible, as-needed ordering to meet dynamic operational demands without prior specification of exact items or quantities. The contract is listed as a forecast with no solicitation number yet assigned and no set-aside specifications indicated. It remains open for future competition and does not specify a NAICS code or office address, suggesting it is a preliminary notice rather than an active bidding opportunity. Vendors interested in supporting emergency response efforts should monitor for future solicitations from HSEMA, as the contract will likely be awarded to qualified providers capable of delivering timely, reliable supplies to support public safety operations within the District of Columbia.

Homeland Security and Emergency Management Agency (HSEMA)

POSTED

DEADLINE

SWMA - Sweeper Parts and EquipmentThe District of Columbia’s Department of Public Works is forecasting a procurement for sweeper parts and equipment under the contract title SWMA - Sweeper Parts and Equipment. This opportunity is posted as a forecast with no solicitation number assigned yet and is intended for suppliers and vendors capable of providing components and equipment necessary for street sweeping operations. The contract does not specify a set-aside type, NAICS code, or organization type, and no point of contact information is currently available. Performance is expected to be within the District of Columbia, though specific location details are not provided. Interested parties should monitor the official portal for future updates regarding the formal solicitation, as this current posting serves as early notice to prepare for potential bidding.

Public Works (DPW)

POSTED

DEADLINE

Notice Of Intent to Award a Sole-Source Bridge Contract Contractor Operated Civil Engineer Supply Store (COCESS) At Ellsworth AFB, SDThe U.S. Air Force intends to award a sole-source, firm-fixed-price bridge contract to CC Distributors, Inc. to operate the Contractor Operated Civil Engineer Supply Store (COCESS) at Ellsworth Air Force Base in South Dakota, ensuring uninterrupted supply-chain support for the Civil Engineer Squadron and base Facility Managers. This action, justified under 10 U.S.C. 3204(a)(1) and FAR 6.302-1, is necessary because the incumbent contractor is the only responsible source capable of providing the required commercial and industrial materials, tools, and equipment without disruption. The contract will have a six-month base period from October 1, 2026, through March 31, 2027, with an optional six-month extension through September 30, 2027, and is scheduled for award on October 1, 2026. No small business or local set-asides apply, and the acquisition falls under NAICS code 423840 for industrial machinery and equipment wholesale and PSC R706 for logistics support. Interested parties may submit a capability statement of up to five pages to demonstrate their ability to assume operations by the start date, though the government has clearly indicated its intent to award to the current provider to maintain service continuity. All submissions must be sent electronically to the designated contracting officer and specialist by the deadline of August 8, 2026, at 1:00 p.m. MDT.

FA4690 28 Cons Pkc

POSTED

DEADLINE

Multiple Victoria Class Spares : Gaskets and GearsThe Department of National Defence is seeking bids for spare parts essential to the maintenance and operational readiness of the Victoria-class submarines, with deliveries required at both CFB Esquimalt and CFB Halifax. The solicitation includes eight line items comprising packing material, gaskets, and a spur gear, all identified by specific National Stock Numbers, part numbers, and NCAGE codes to ensure strict compatibility with existing Canadian military equipment. Each item is duplicated for delivery to both locations, totaling 5 units of packing material, 20 gaskets across three part numbers, and 2 spur gears. Bidders must adhere to rigorous technical specifications, including precise packaging and marking requirements dictated by Canadian Forces Packaging Specifications, and must provide manufacturer certificates of conformity signed by authorized personnel. Quality assurance mandates compliance with ISO 9001:2015 under Quality Assurance Code C for most items and Code Q for the spur gears, with Canada retaining full right of access to supplier facilities for inspection throughout the production and delivery phases. All bids must be submitted in separately bound technical, financial, certification, and additional information sections, with submissions accepted electronically via Canada Post’s CPC Connect service or in hard copy adhering to strict sustainability standards, including recycled content and double-sided printing. Bids must include accurate part numbers and NCAGE codes, and Canadian suppliers are required to quote prices exclusively in Canadian dollars; failure to meet any mandatory technical or currency criteria renders a bid non-responsive. The contract will be awarded on an item-by-item basis to the lowest evaluated responsive bid, with payment processed through electronic methods including direct deposit and EDI upon delivery and certification. Delivery must occur under FCA Incoterms 2000 terms, meaning bidders are responsible for loading goods onto carriers designated by the Department of National Defence. The contract period extends to the end of the warranty period as defined in the general conditions, and ongoing compliance with all submitted certifications is a condition of contract performance, subject to verification at any time. All documentation may be submitted in either English or French, and the closing date for submissions is July 17, 2026, at 14:00 EDT.

Department of National Defence

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Demilitarization Planning and Compliance (Category I Munitions)The contract requires comprehensive design and documentation support to ensure Category I Munitions List items can be effectively demilitarized in full compliance with DODM 4160.28-Vol. 3, focusing on safety, regulatory adherence, and technical feasibility throughout the disposal process. The work must integrate planning protocols that anticipatе end-of-life handling requirements, including material separation, destructive methods, environmental controls, and recordkeeping, all aligned with Department of Defense standards for high-hazard munitions. This subcontract, issued under NAICS code 561990, is administered by the DDSP NEW CUMBERLAND FACILITY within the Department of Defense and is performance-based at the New Cumberland location with ZIP code 17070-5002. Offers must be submitted by August 3, 2026, with the procurement opportunity posted on July 24, 2026, and accessible via the DIBBS platform. The solicitation does not specify a set-aside category or point of contact, and all responsibilities fall under the contractor’s obligation to deliver technically sound and compliant demilitarization documentation and design support.

All Other Support Services

POSTED

DEADLINE

Export-Controlled Technical Data Management and ComplianceThe contract pertains to the management of ITAR and EAR compliance for technical data at the Department of Defense’s New Cumberland facility, requiring the implementation of robust controls to ensure adherence to U.S. export regulations. Key responsibilities include developing and delivering training programs on export control requirements, establishing and maintaining access controls to restrict unauthorized handling of controlled technical data, and ensuring thorough documentation of all compliance-related activities. The contractor must also complete the Defense Logistics Agency’s export-controlled data questionnaire accurately and in a timely manner to support regulatory accountability and audit readiness. This subcontract, classified under NAICS code 541611, is focused on specialized administrative and support services related to export compliance and is positioned for performance at the New Cumberland location with ZIP code 17070-5002. Proposals must be submitted by August 3, 2026, and the work is expected to support defense-related technical operations under strict regulatory oversight. The absence of a set-aside designation indicates the opportunity is open to all eligible businesses, with emphasis on technical expertise in international traffic in arms and export administration regulations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Specialized Packaging and Preservation (SPI AM61673128 REV H)The contract requires the execution of specialized packaging and preservation services in strict compliance with SPI AM61673128 REV H, encompassing the use of moisture barriers, desiccants, and vacuum sealing to ensure long-term protection of sensitive materials. All items must be properly labeled with MIL-STD-129 barcoding to meet military logistics and tracking standards. The work is scoped under a subcontract for the DDSP NEW CUMBERLAND FACILITY, part of the Department of Defense, with performance required at the location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 24, 2026, and proposals must be submitted by August 3, 2026. The NAICS code 561910 identifies this as a specialized packaging and preservation service within the waste management and remediation services sector, though the specific nature of the materials being preserved is not detailed in the data provided.

Packaging and Labeling Services

POSTED

DEADLINE

Phosphate Coating and Surface Treatment ServicesThe contract seeks subcontracted services for the application of phosphate coating to metal components in accordance with military specifications to achieve optimal corrosion resistance and enhanced paint adhesion. The work must strictly comply with RQ036 and SPI AM61673128 REV H standards, ensuring that all surface treatments meet required performance and quality benchmarks. The North American Industry Classification System code 332813 identifies the scope as metal finishing, plating, and coating services, focusing on specialized industrial treatments critical to defense manufacturing. The contract is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance designated to occur at a facility located in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by August 3, 2026. This is a subcontract opportunity with no set-aside designation, indicating it is open to all eligible vendors without restriction based on business size or ownership type. Interested parties must access the full solicitation details through the provided DIBBS link to prepare compliant submissions.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Precision Machining and Fabrication of Howitzer Carriage ComponentsThe contract requires the manufacture of high-strength, precision-machined components for howitzer carriages, aligned with military standards MIL-DTL-64159 and MIL-DTL-53039F, encompassing critical processes such as welding, heat treatment, and strict dimensional tolerancing to ensure operational reliability under combat conditions. All work must be performed to exacting specifications to meet the performance and durability demands of artillery systems, with final products subject to rigorous quality inspection and compliance verification. This is a subcontract opportunity issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at a facility in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by August 3, 2026, with the NAICS code 332322 indicating classification under other forging and stamping operations. Interested parties must ensure full alignment with defense manufacturing requirements and be prepared to demonstrate capability in meeting stringent military specifications without deviation.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

CARRIAGE, HOWITZERThe contract pertains to the procurement of 22 units of a Howitzer Carriage identified by NSN 1015-00-616-7318, with a delivery timeline of 154 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is classified as a Category I munitions item requiring demilitarization, and its technical data is subject to export controls under ITAR or EAR, necessitating strict compliance with DFARS 252.225-7048. Access to controlled technical data is limited to contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and prior authorization from DLA. Cybersecurity compliance mandates CMMC Level 2, either through self-assessment or certification by an accredited third-party assessor. Quality assurance includes tailored higher-level requirements, inspection and acceptance at origin, configuration change management via engineering change proposals, and adherence to Qualified Products or Manufacturers Lists where applicable. Items must be physically marked according to specified standards, and unauthorized government identification must be removed from non-accepted supplies. Packaging must meet DLA standards, and while unique item identification is not required, DFARS 252.211-7003 applies. The contract is issued under solicitation SPE7L7-26-Q-2062 by the Department of Defense’s New Cumberland facility, with Charles Duncan as the point of contact.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

GUARD, HAND, GUNThe contract calls for the supply of nine guard, hand, gun units identified by NSN 1005-00-856-2108, with delivery required within 66 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is classified as a Category I munitions item under DoD 4160.28 Volume 3, requiring demilitarization upon disposal. Export control restrictions apply due to technical data subject to ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals employed by U.S. companies, and mandating compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and formal authorization from DLA. The contractor must adhere to DLA packaging standards, implement tailored higher-level quality requirements, manage configuration changes via engineering change proposals or variance requests, and ensure components originate from qualified products or manufacturers listed per procurement note H02. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Cybersecurity compliance requires a CMMC Level 2 self-assessment or certification by a C3PAO. Item Unique Identification is waived per the service customer’s request, in accordance with DFARS 252.211-7003. The solicitation was issued on July 24, 2026, with responses due by August 3, 2026, and performance is directed to New Cumberland, Pennsylvania.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

FAN, CENTRIFUGALThe contract is for the procurement of nine centrifugal fans, identified by NSN 4140-01-678-6881 and part number 269408 from VANAIR MANUFACTURING INC, under solicitation SPE8E7-26-T-0169. The unit price is $9.00 per unit, with a total contract value of $81.00, and delivery is required FOB origin within 167 days from the original required delivery date of February 21, 2026, with a need ship date of April 13, 2026. The quantity is strictly fixed with no variance allowed, and inspection and acceptance both occur at the destination. All packaging must comply with DLA packaging requirements, specifically MIL-STD-129 for marking and labeling, and ASTM D3951 for general packaging, with precedence given to the DLA Master List of Technical and Quality Requirements when conflicts arise. The items must be palletized according to RP001 guidelines and are to be delivered to the DDSP New Cumberland facility in Pennsylvania, with parcel post and freight shipping instructions directing to the same address. Covered defense information may apply, and removal of government identification from non-accepted supplies is mandated. The contract is governed by DLA procedures for transportation, and the unit of issue is each (EA), consistent with the DoD authorized standard.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

DEADLINE

ROLL SET, ROLLER TUBThis contract pertains to the procurement of a ROLL SET, ROLLER TUB, identified by NSN 3456-00-640-3603, with a required quantity of four units, to be delivered in 167 days under solicitation SPE8E5-26-T-3540. The item consists of two SR28 rollers, one FR4 roller, and one LR28 roller, and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, incorporating R and I numbered specifications. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and marking requirements, and all units must be palletized according to DLA packaging guidelines. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The contract strictly prohibits the intentional use of ozone-depleting substances and mercury or mercury-containing compounds, except for designated functional uses in batteries, instrumentation, or weapon systems as permitted by NAVSEA, with additional containment requirements for portable mercury-containing devices. The contract mandates zero-defect sampling under MIL-STD-1916 or ASQ H1331, with verification levels assigned to critical, major, and minor attributes at VII, IV, and II respectively, and any unspecified attributes treated as major. The technical data package is unrestricted and available for reference. Deliveries must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, following transportation directives and DLA procedural notes. The required delivery date is May 4, 2027, with a need ship date of January 4, 2027, and the solicitation closed on July 29, 2026. The contracting office is under the Department of Defense, with the primary point of contact being Khue Nguyen at DLA’s New Cumberland facility. The unit of issue is SE, and the purchase request number is 7017421876, with pricing and total cost specified under CLIN 0001. All provisions are governed by the revision of the DLA Master List in effect at the time of award, and compliance with technical documentation, including revision A of the TDP under MIL-E-17624B, is mandatory.

Machine Tool Manufacturing

POSTED

DEADLINE

VALVE, SAFETY RELIEFThe contract solicitation is for four safety relief valves under NSN 4820-01-490-5997, with a requirement for delivery within 105 days of award. The procurement is managed by the DLA New Cumberland Facility under the Department of Defense, with the solicitation number SPE7MC-26-T-039R, posted on July 24, 2026, and responses due by July 29, 2026. The NAICS code 332911 indicates the industry classification for miscellaneous fabricated metal product manufacturing. Packaging and procurement must comply with DLA packaging requirements, and the place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The primary point of contact for inquiries is Paula McClary, reachable via email at fmda3302@dla.mil or phone at 614-692-0417. The solicitation is open to federal contractors with no specific set-aside designation noted.

Industrial Valve Manufacturing

POSTED

DEADLINE

ACTUATOR, ELECTRO-METhe contract calls for the procurement of one electro-mechanical rotary actuator identified by NSN 4810-01-392-6656 and part number 20007-2, manufactured by MORPAC INDUSTRIES, INC, under solicitation SPE7MC-26-T-134B. The item is classified as a critical application, field-level reparable, and requires military packaging in full compliance with MIL-STD-2073-1E, including individual packaging, immobilization within the container, and the use of a wooden box with an inspection window. Preservation follows Method 52 with CLNG/DRY:1, Preservation Material 89, GC wrap, and AD cushioning at thickness code F, while reusable container applications must adhere to Method 50. Marking must conform to MIL-STD-129, incorporating specific special codes including ARROW UP, METHOD 50, CENTER OF BALANCE, REUSABLE CONTAINER, and OPEN FOR INSPECTION OR USE ONLY, along with ZZ special requirements. Delivery is FOB origin, with inspection and acceptance occurring at destination after a 164-day ADO delivery window, with the original required delivery date set for September 30, 2028, and a need ship date of January 5, 2027. The item must be shipped to the DLA Distribution facility at New Cumberland, PA, with the parcel post address and shipping instructions clearly defined. The contract incorporates extensive technical and quality requirements via the DLA Master List referenced in RA001, with revisions controlled by the solicitation issue or award date depending on acquisition size. Compliance with hazardous materials handling is mandated through clauses covering hazard communication, hexavalent chromium prohibition, and toxic material disposal, requiring SDS submissions and regulatory labeling under FIFRA and FDCA. Cybersecurity and information safeguarding are enforced through DFARS 252.204-7012 and related clauses, while trafficking in persons, employment eligibility, sustainable products, and whistleblower protections are covered by applicable FAR clauses. Payment must be submitted electronically via WAWF, and the contractor must hold a valid UEI and CAGE code, with small business representation required and subject to SAM verification. The contract includes clauses waiving certain small business program requirements and prohibits acquisition of covered defense telecommunications equipment from communist Chinese military companies. No pricing data is filled in the CLIN,

Industrial Valve Manufacturing

POSTED

DEADLINE

FAN, CENTRIFUGALThe contract is for the procurement of nine centrifugal fans with NSN 4140-01-678-6881 and manufacturer part number 269408 from VANAIR MANUFACTURING INC, issued under solicitation SPE8E7-26-T-3000. The unit price is $9.00 per unit, totaling $81.00, with delivery required FOB origin within 167 days of contract award, and the original required delivery date is set for September 22, 2026, with a need ship date of December 7, 2026. No quantity variance is permitted, and inspection and acceptance both occur at the destination. Packaging must comply with ASTM D3951, but all technical and quality requirements from the DLA Master List of Technical and Quality Requirements take precedence. Marking and labeling of packaging must adhere to MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement. All supplies must be delivered to the specified DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions reference DLAD PROC NOTES C19 and C20. The contract incorporates provisions for the removal of government identification from non-accepted supplies and may involve covered defense information. The unit of issue is each, and all details align with the DoD authorized unit of issue standards.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

DEADLINE