Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military Marking and Labeling Services

Active

Federal

Response Deadline07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application of permanent physical identification, barcoding, and labeling to bearing collars and containers in strict compliance with MIL-STD-129 standards, ensuring all items are properly marked with manufacturer part numbers and appropriate hazardous material warnings. The work must be performed to meet DoD specifications for uniformity, durability, and traceability, with accuracy and adherence to regulatory requirements being critical to successful delivery. All labeling must remain legible and intact under operational conditions, and the process must support inventory management and logistical tracking across military supply chains. This subcontract is issued by the ASC Commodities Division under the Department of Defense, with a performance location in New Cumberland, Pennsylvania, at zip code 17070-5002. The solicitation was posted on July 16, 2026, and responses are due by July 24, 2026. It falls under NAICS code 811219, which pertains to other commercial and industrial machinery and equipment repair and maintenance services. The contract is open for bidding through the DIBBS platform, and interested parties must submit proposals prior to the deadline to be considered for award.

General Info

Apply MIL-STD-129 barcoding and labeling to bearing collars and containers per DoD standards in New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

811219 - Other Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 24

Submission deadline

Response Deadline

07/24/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply permanent physical identification, barcoding, and labeling to bearing collars and containers per MIL-STD-129, including manufacturer P/N and hazardous material warnings.

Similar Contracts

Same NAICS industry code

DVBE-Targeted Subcontracting and Outreach SupportThe contract titled DVBE-Targeted Subcontracting and Outreach Support is issued by the California Department of General Services to provide subcontracting and administrative assistance aimed at helping the prime contractor achieve Disadvantaged Business Enterprise participation goals. This support includes managing documentation, verifying vendor eligibility, and maintaining records to confirm DVBE involvement throughout the project lifecycle. The effort is focused on ensuring compliance with state-mandated diversity and inclusion requirements by facilitating meaningful engagement between the prime contractor and certified DVBEs. Subcontractors or service providers responding to this opportunity must be prepared to deliver targeted outreach, track engagement metrics, and ensure accurate and timely reporting to meet DVBE participation benchmarks. The solicitation was posted on July 16, 2026, with responses due by August 11, 2026, and is categorized under NAICS code 811219, which covers other personal and household goods repair and maintenance services. Performance location details are not specified, but the work is expected to support statewide initiatives under California’s procurement framework. The contract is open to entities capable of providing administrative and logistical support without requiring specific set-aside qualifications.

California Department of General Services

POSTED

DEADLINE

Quality Inspection and Certification – Pre-Delivery VerificationThe contract requires comprehensive pre-shipment inspection and certification of tube assemblies to ensure strict adherence to National Stock Number requirements, accurate quantities, proper packaging standards, and all specified contract terms. This verification process is critical to securing final acceptance by the Defense Logistics Agency and supports the agency’s mission to maintain reliable supply chain integrity for Department of Defense operations. All inspections must be conducted thoroughly and documented with formal certification to confirm compliance prior to delivery. The work falls under NAICS code 811219 and is classified as a subcontract within the broader DLA procurement framework. Performance is not tied to a specific geographic location, indicating flexibility in where the inspections may be carried out as long as they align with the contract’s logistical and quality control parameters. The contract was posted in July 2026 and links to a public DIBBS award record, reflecting its connection to the larger SPE7LX24D0096 contract with delivery reference SPE7LX26FB391 and contract count 2092. The focus remains entirely on quality assurance and pre-delivery validation to guarantee that all tube assemblies meet military standards before acceptance.

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection System Compliance

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Quality Inspection & Acceptance SupportThe contract requires performance of in-process and final quality inspections in accordance with ASQ Z1.4 and MIL-STD-1916 sampling standards to support government acceptance of products. The work is tied to the Department of Defense through the LAND SUPPLY CHAIN organization and is to be performed at a specified location in San Diego, California, with a zip code of 92136-3581. The contract is structured as a subcontract and is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, emphasizing eligibility and ownership requirements. The North American Industry Classification System code 811219 indicates the work involves other personal and household goods repair and maintenance, suggesting the quality inspection activities may support maintenance or repair operations. Bidders must submit proposals by the deadline of July 27, 2026, following the solicitation posted on July 16, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Quality Inspection and Destination Acceptance SupportThe contract requires the performance of pre-shipment inspections in strict accordance with MIL-STD-1916 or ASQ Z1.4 standards, enforcing a zero tolerance policy for any non-conformances, meaning no defective or non-compliant items are acceptable under any circumstances. The inspection process must be thorough and rigorous, ensuring all deliverables meet the exacting quality expectations set by the Department of Defense. Additional support is required at the destination, where the contractor must assist the Defense Logistics Agency in conducting final acceptance inspections to verify compliance and readiness for receipt and use. The work is to be performed at Tracy, California, with a zip code of 95304-5000, and the contractor must be prepared to coordinate logistics and documentation to facilitate seamless transition and validation at the delivery point. This subcontract falls under NAICS code 811219 and is managed by the ASC Commodities Division under the Department of Defense. Interested parties must submit responses by July 24, 2026, to be considered, with no flexibility on the deadline or the non-conformance acceptance criteria. All activities must be executed with precision to ensure operational readiness and full adherence to military quality assurance protocols.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-STD-129 Marking and LabelingThe contract requires the application of MIL-STD-129 compliant markings on packaged filter units, ensuring all required data elements including barcodes, National Stock Numbers, contract number, and lot or item numbers are accurately and consistently labeled. This work must adhere strictly to military standards for identification and traceability to support logistics and inventory management within the Department of Defense supply chain. The subcontract is issued under the NAICS code 811219 and is managed by the Defense Logistics Agency, with performance expected nationwide without a specified geographic constraint. The solicitation was posted in July 2026 and is linked to contract SPE7L326P4879, indicating it is part of a larger procurement effort to maintain standardized labeling practices across defense logistics operations.

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection Support

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection SupportThe contract requires strict adherence to zero non-conformances during first-article and lot inspections, conducted in accordance with MIL-STD-1916 or ASQ Z1.4 standards. All inspection activities must ensure complete compliance with military quality specifications, with no tolerance for defects or deviations. The contractor is also expected to provide full support to government inspection personnel at the origin, facilitating seamless verification and acceptance of products prior to delivery. This work is tied to a high-stakes defense procurement environment where quality integrity is non-negotiable. The solicitation is issued under the NAICS code 811219 and is classified as a subcontract, with the placing agency being the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is required at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The response deadline is July 23, 2026, and the solicitation was posted on July 15, 2026, indicating a limited window for submission. All offerors must be prepared to meet exacting inspection protocols and demonstrate proven capability in supporting government oversight at source locations without delay or compromise.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Origin Inspection and Acceptance SupportThe contract titled Origin Inspection and Acceptance Support requires comprehensive support for government inspection and acceptance activities at the origin, in full compliance with FAR 52.246-2. This includes the preparation and coordination of all necessary documentation to ensure that supplies or services meet federal standards prior to acceptance, with a focus on seamless communication and procedural adherence throughout the inspection process. The work is expected to be performed in San Diego, California, with the place of performance specified as 92136-3581. This is a subcontract classified as a Women-Owned Small Business Set-Aside under NAICS code 811219, reserved exclusively for eligible WOSB entities. The solicitation was posted on July 15, 2026, with a response deadline of July 20, 2026, indicating a short window for submissions. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and all activities must align with DOD procurement protocols. Contractors must be prepared to handle inspection logistics, maintain detailed records, and coordinate closely with government representatives to ensure flawless acceptance at the point of origin.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Calibration Services for Radar and Lidar SystemsThe contract involves the periodic calibration and certification of radar and lidar systems used in traffic enforcement, ensuring the devices maintain regulatory accuracy and legal defensibility. All services must be performed to meet established technical and compliance standards, supporting the integrity of speed enforcement operations conducted by the Massachusetts Traffic Programs agency. The work is tied to a specific place of performance at Worcester Rd in Framingham, Massachusetts, with a zip code of 01702, indicating the physical location where equipment will be serviced or collected for calibration. This subcontract opportunity was posted on July 15, 2026, with a response deadline of August 24, 2026, and is classified under NAICS code 811219, which pertains to other electronic and precision equipment repair and maintenance. The contracting entity is POLTRAF - Traffic Programs, operating under the state of Massachusetts, and no set-aside provisions are designated for small businesses or other categories. Contractors must be prepared to deliver timely, certified calibration results that uphold the evidentiary standards required in court proceedings, with all work expected to be completed without disruption to ongoing traffic enforcement activities.

POLTRAF - Traffic Programs

POSTED

DEADLINE

in about 1 month

Air Quality Monitoring Equipment Maintenance & RepairThe contract seeks a vendor to provide on-demand maintenance, calibration, repair, and loaner unit support for RAE Systems portable gas detection devices used in air quality monitoring operations. Services must be available promptly to ensure continuous operational readiness of the equipment, with an emphasis on timely response and high reliability to support environmental protection activities. The work will be performed as a subcontract under the Kentucky Department for Environmental Protection, with performance expected to be coordinated across locations designated as “Other,” indicating flexibility in service delivery without a fixed geographic constraint. The solicitation was posted on July 15, 2026, with responses due by August 4, 2026, at 5:30 PM. The North American Industry Classification System code 811219 applies, aligning the work with other electronic equipment repair and maintenance services. There is no specified set-aside type, meaning the contract is open to all qualifying businesses. The lead agency is the Kentucky division of the Department for Environmental Protection, and all inquiries and submissions must be handled through the provided online portal, though no point of contact details are listed in the data. The scope focuses exclusively on supporting RAE Systems hardware, requiring the contractor to be familiar with the specific technical specifications, software, and calibration standards of these units.

Dept for Environmental Protect

POSTED

DEADLINE

Quality Inspection and Conformance DocumentationThe contract titled Quality Inspection and Conformance Documentation is a subcontract under the Defense Logistics Agency, part of the Department of Defense, assigned a NAICS code of 811219, which corresponds to other commercial and industrial machinery and equipment repair and maintenance. The primary obligation involves conducting final quality inspections and producing all necessary conformance documentation, including Certificates of Conformance and detailed inspection reports, ensuring products meet required technical and regulatory standards. The solicitation was posted on July 14, 2026, and while specific location details for performance or the point of contact are not provided, the work is expected to align with DLA’s supply chain integrity requirements. The contract is accessible via the DIBBS system under the award number SPE7LX26D0066 and delivery order SPE7LX26F65L5, indicating it is part of a larger defense logistics framework.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Government First Article Inspection and TestingThe contract requires the performance of a first article inspection and testing on an aircraft structural fitting to ensure full compliance with drawing 7574876. This includes detailed dimensional measurements, verification of material specifications, non-destructive testing, and the preparation of a formal inspection report. All work must demonstrate adherence to the technical requirements outlined in the drawing and meet applicable quality standards for aerospace components. The effort is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses can bid, and it is classified under NAICS code 541330, which pertains to engineering services. The solicitation was posted by the ASC Commodities Division of the Department of Defense and is open for response until July 27, 2026, with no specific location provided for performance.

Engineering Services

POSTED

about 16 hours ago

DEADLINE

Precision Manufacturing of Aircraft Structural FittingThe contract involves the precision manufacture of a critical safety aircraft structural fitting identified by Part Number S03-02-R-100, following the specifications outlined in drawing 7574876. The scope encompasses full production lifecycle activities including material sourcing, machining, heat treatment, and surface finishing, all required to meet stringent aerospace industry standards for structural integrity, durability, and safety compliance. All work must be performed in accordance with applicable aerospace quality and inspection protocols to ensure the component meets mission-critical performance requirements. This is a total small business set-aside under the SBA program as defined by FAR 19.5, with the NAICS code 332312 classifying it under forge and stamping manufacturing. The contract is issued under the Department of Defense’s ASC Commodities Division and is structured as a subcontract. Proposals must be submitted by the deadline of July 27, 2026, with the solicitation published on July 17, 2026. All manufacturing activities are expected to adhere to defense supply chain requirements, and the place of performance is not specified, implying flexibility as long as compliance and delivery obligations are met.

Fabricated Structural Metal Manufacturing

POSTED

about 16 hours ago

DEADLINE

Quality Assurance and Inspection at OriginThe contract titled Quality Assurance and Inspection at Origin requires the contractor to perform inspection and acceptance of supplies at the point of production or packaging, in strict adherence to contract clause 52.246-9008. This work is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to participate as defined by the SBA and FAR 19.5. The NAICS code 541330 identifies the scope as ranging within architectural, engineering, and related services, indicating the nature of the quality assurance activities involves technical oversight and compliance evaluation rather than direct manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026, and is managed by the ASC Commodities Division within the Department of Defense, though specific point of contact and place of performance details are not provided. The contract emphasizes the importance of ensuring supplies meet required standards prior to shipment, with inspections conducted directly at the origin, which may include facilities across various locations. Compliance with the referenced clause mandates adherence to federal procurement quality assurance procedures, requiring detailed documentation, evaluation criteria, and acceptance protocols to be followed during inspection. The absence of explicit location or contact information suggests the contractor must be prepared to perform at any production or packaging site tied to the supply chain, and the lack of defined city or state for performance implies a potentially nationwide scope requiring logistical flexibility and readiness to deploy inspection personnel as needed. The contract is accessible through the DIBBS portal for further procedural details.

Engineering Services

POSTED

about 16 hours ago

DEADLINE

ITAR/EAR Compliance and Export-Controlled Data HandlingThe contract mandates strict compliance with ITAR and EAR regulations for all suppliers and subcontractors handling export-controlled technical data, ensuring that only authorized entities with proper registration and documentation are engaged in work involving sensitive information. All parties must demonstrate adherence to U.S. export control laws as a condition of participation, with failure to comply potentially resulting in termination or penalties. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 541611, which pertains to management consulting services. The award is issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026, and performance expected to occur under the terms of a subcontract agreement. Participation requires proactive verification of regulatory standing and ongoing compliance monitoring for the duration of the contract.

Administrative Management and General Management Consulting Services

POSTED

about 16 hours ago

DEADLINE

Subcontracting Plan Compliance and Small Business OutreachThe contract requires the development and execution of a federal subcontracting plan designed to ensure compliance with Department of Defense regulations and Small Business Administration guidelines for maximizing participation by disadvantaged, minority, and women-owned businesses. The goal is to meet specific targets for DBE, MBE, and WBE subcontracting as mandated by the Federal Acquisition Regulation and SBA rules, with all activities aligned to a total small business set-aside under FAR 19.5. The work focuses on strategic outreach, monitoring, documentation, and reporting to demonstrate consistent adherence to small business utilization standards throughout the contract performance period. The solicitation, issued under NAICS code 541611 for management consulting services, is administered by the ASC Commodities Division within the Department of Defense and is open for response through July 27, 2026. All subcontracting efforts must be structured to promote equitable access and measurable outcomes for certified small, minority, and women-owned businesses, with full transparency and accountability required in tracking participation. The successful contractor will be responsible for designing, implementing, and sustaining a comprehensive subcontracting strategy that aligns with federal obligations and supports the agency's commitment to small business procurement goals.

Administrative Management and General Management Consulting Services

POSTED

about 16 hours ago

DEADLINE

Critical Safety Item (CSI) Manufacturing and SupplyThe contract involves the manufacture and delivery of Critical Safety Items specified by the U.S. Navy, with stringent requirements for sourcing controls, component traceability, and full compliance with defense-specific technical and quality standards. These items are essential to mission-critical systems and must be produced under strict regulatory oversight to ensure reliability and safety throughout their lifecycle. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the NAICS code 332999 indicates the work falls under other fabricated metal product manufacturing. All production and delivery activities must adhere to military specifications, and suppliers are expected to implement robust documentation and audit-ready tracking systems for every component and process step. The solicitation was posted on July 17, 2026, with a deadline for responses on July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. There is no specified place of performance, suggesting flexibility in manufacturing locations provided all requirements are met, and no point of contact is listed, implying inquiries must be directed through the official DIBBS portal referenced in the link. The nature of the work demands a high level of precision and accountability, with failure to meet traceability or compliance standards likely resulting in disqualification or contract termination. Suppliers must be prepared to demonstrate proven capability in handling sensitive defense components and maintaining data integrity across the supply chain.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

Quality Inspection and Product Verification TestingThe contract requires the performance of in-process and final inspections on bushing assemblies in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring compliance with rigorous quality and verification protocols. The contractor is responsible for generating accurate test reports and providing full support to Government acceptance activities, demonstrating consistent adherence to defense-grade quality requirements throughout the production lifecycle. This work is critical to validating the integrity and functionality of components used in defense systems. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 541330, and issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026. While specific location details are not provided, the place of performance is tied to defense operations under the DLA umbrella, and all submissions must be made through the designated DIBBS portal. The contract emphasizes the need for qualified small business entities capable of delivering precise inspection services under strict military specifications.

Engineering Services

POSTED

about 16 hours ago

DEADLINE

Domestic and International Freight Logistics (U.S.-Flag Vessel Compliance)The contract requires the arrangement of domestic and international freight logistics for the shipment of bushing assemblies to locations within the continental United States, with strict adherence to U.S.-flag vessel requirements mandated by the Cargo Preference Act for all ocean freight portions. This ensures compliance with federal regulations that prioritize the use of American-owned and flagged vessels for the transportation of government cargo. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses certified by the Small Business Administration, and is classified under NAICS code 483112, which pertains to foreign ocean transportation. The opportunity was posted on July 17, 2026, with a response deadline of July 27, 2026, and is overseen by the ASC Commodities Division of the Department of Defense, with performance tied to U.S. domestic destinations. The requirement emphasizes logistical precision, regulatory compliance, and small business participation in fulfilling defense-related supply chain needs.

Deep Sea Passenger Transportation

POSTED

about 16 hours ago

DEADLINE

Supply Chain Traceability and Documentation ManagementThe contract requires the maintenance of fully auditable records to ensure complete traceability of material origin, certifications, inspections, and adherence to all Government traceability mandates, specifically in compliance with DFARS requirements. All documentation must support transparency and accountability throughout the supply chain, enabling verification of source materials and compliance with defense contracting standards. The contractor must implement systems and procedures capable of sustaining rigorous audit readiness and meeting every contractual obligation related to documentation integrity and regulatory compliance. This is a small business total set-aside subcontract under NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. Responses are due by July 27, 2026, and performance is expected to align with federal defense supply chain protocols. The contract emphasizes strict adherence to traceability standards and requires proven capability in managing complex documentation systems under federal oversight. While specific location details are not provided, all work must satisfy DoD requirements for origin verification and material accountability.

Administrative Management and General Management Consulting Services

POSTED

about 16 hours ago

DEADLINE

Packaging, Marking, and Labeling ServicesThe contract seeks qualified small businesses to provide military-compliant packaging, preservation, and labeling services for bushing assemblies, adhering strictly to DLA and MIL-STD-129 standards. Essential requirements include accurate barcode application, application of special handling labels, and full compliance with defense logistics protocols to ensure traceability, durability, and readiness for military distribution. The work must be performed in accordance with federal regulations governing packaging integrity and labeling accuracy to support the Department of Defense’s supply chain standards. This is a total small business set-aside under NAICS code 493190, restricted exclusively to small businesses as defined by the SBA, and is issued as a subcontract by the ASC Commodities Division within the Department of Defense. Responses are due by July 27, 2026, with the solicitation posted on July 17, 2026, and all work expected to align with DLA’s logistical demands for defense components. The place of performance and point of contact details are not specified, but all proposals must demonstrate readiness to meet stringent military packaging and documentation requirements without deviation.

Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

Precision Machining of Bushing Assembly (NSN 5365-01-541-2220)The contract pertains to the manufacture and delivery of precision bushing assemblies identified by NSN 5365-01-541-2220, requiring strict adherence to military specifications throughout production. Work includes CNC machining to exact tolerances, comprehensive inspection processes, and full compliance with traceability and packaging standards mandated for defense applications. The contract is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 332710 applicable to forged and stamped metal product manufacturing. The opportunity was posted on July 17, 2026, with responses due by July 27, 2026, and is issued by the ASC Commodities Division under the Department of Defense. Performance is expected to occur at an undefined location, and all deliverables must meet federal defense supply chain requirements, ensuring readiness for military use.

POSTED

about 16 hours ago

DEADLINE

Small Business and DBE/MBE/WBE Subcontracting ParticipationThis contract opportunity is designed to facilitate participation by small, disadvantaged, minority-owned, and women-owned businesses in supply or compliance roles under a prime contract managed by the ASC Commodities Division within the Department of Defense. The solicitation, identified by the NAICS code 335931, focuses on subcontracting engagement and does not specify a set-aside type, meaning it is open to qualified entities meeting ownership and size criteria without formal classification under a specific program. Interested businesses must respond by the deadline of August 16, 2026, to be considered for inclusion in the workforce supporting the prime contract's delivery and compliance requirements. The work will be performed without a specified geographic location, indicating potential flexibility in performance sites. Participation is facilitated through the DIBBS platform, where full details and submission protocols can be accessed.

Current-Carrying Wiring Device Manufacturing

POSTED

about 16 hours ago

DEADLINE