Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Military Packaging and Labeling Compliance Service

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires compliance with MIL-STD-129 standards for the packaging, labeling, and palletization of serialized military containers, ensuring full adherence to Department of Defense logistical and identification protocols. The work involves securing, marking, and arranging military shipments in a manner that supports traceability, inventory accuracy, and handling efficiency throughout the supply chain, with all labeling and packaging elements meeting strict government specifications for barcodes, data matrix codes, and container identification. This subcontract is issued under NAICS code 385990 and is associated with the Medical Supply Chain FSH under the Department of Defense. Performance is to be executed at FPO with a ZIP code of 96662, and responses must be submitted by August 4, 2026. The solicitation is open for qualified vendors capable of delivering end-to-end packaging and labeling services compliant with military serialization requirements, with an emphasis on accuracy, timeliness, and regulatory alignment across all stages of container preparation for shipment.

General Info

Comply with MIL-STD-129 for military packaging, labeling, and palletization at FPO 96662 by August 4, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

Place of Performance

FPO, AP, 96662, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provide MIL-STD-129 compliant packaging, labeling, and palletization services for serialized military containers.

Similar Contracts

Same NAICS industry code

NAICS: 385990
New
DIBBS
Military-Compliant Packaging and Kitting ServicesThe contract requires comprehensive packaging, marking, and kitting of electronic components to fully comply with MIL-STD-129 standards for delivery to Defense Logistics Agency depots. All work must meet strict military specifications for labeling, barcoding, physical packaging, and documentation to ensure traceability, durability, and seamless integration into DLA supply chain operations. The performance location is designated as Tracy, California, with a ZIP code of 95304-5000, and the work is categorized under NAICS code 385990 for other electrical equipment and component manufacturing. The contract is structured as a subcontract and is not subject to any specific set-aside requirements. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026. The contracting activity is under the ACTIVE DEVICES DIVISION of the Department of Defense, which oversees technical and logistical requirements for defense electronics. All vendors interested in participating must ensure their processes, facilities, and personnel are certified and capable of consistent adherence to MIL-STD-129 protocols, including proper use of UID labels, moisture barrier packaging where applicable, and accurate shipping documentation. Submissions must be completed through the DIBBS platform using the provided UI link before the deadline to be considered.
ACTIVE DEVICES DIVISION

POSTED

7 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 334519
New
DIBBS
BLOOD COLLECTING UNIT
Solicitation # SPE2DH-26-T-5617
The Blood Collecting Unit is a medical device featuring a 7-inch tubing with a Luer adapter and a 21-gauge needle measuring 0.75 inches, equipped with a manually activated safety shield that fully covers the needle upon use to enhance user safety. Each unit is packaged in quantities of 200 per PG, with the unit of issue defined as one PG equaling 200 individual units. This item is subject to stringent technical and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, and it is classified as a TYPE I (CODE Q) item with a non-extendable shelf life of 36 months, requiring that no more than five months have elapsed from the date of manufacture to the date of delivery to the government. All packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include clear markings for the date of manufacture, expiration or retest date, and the contract or lot number in accordance with the latest revision of MMS1C. Packaging must be commercial-grade, sealed to prevent damage, and arranged in exterior shipping containers suitable for safe transport via common carrier at the lowest possible rate to the designated delivery point at Fort Bliss, Texas. The item is governed by the procurement document SPE2DH-26-T-5617, and bidders must provide the source and part number being supplied, in addition to adhering to all applicable DLA packaging and labeling directives, including the removal of government identification from non-accepted supplies and the safeguarding of covered defense information. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and a required delivery timeframe of 20 days after award.
Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
DIBBS
MEASURING TUBE, GAS
Solicitation # SPE2DH-26-T-5587
The measuring tube for gas analyzer is designed to measure carbon dioxide content in compressed gases with a range of 100 to 3000 parts per million for one liter of air. It is a glass tube with rounded, melted tips and is sold in packages of ten, identified under unit of issue PG. This item is governed by the DLA Master List of Technical and Quality Requirements and is subject to specific packaging standards as outlined in DLA Packaging Requirements, with all packaging required to comply with Medical Marking Standard No. 1, replacing MIL-STD-129. Each unit must be securely sealed in a commercial container to prevent breakage and shipped in appropriate exterior containers to ensure safe delivery at the lowest carrier rate to the designated delivery point. The item has a non-extendable shelf life of 24 months, with no more than three months allowed to have elapsed from the date of manufacture to the date of government delivery. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number in accordance with the latest revision of MMS1C. This item is classified as a TYPE I (CODE M) shelf-life item under SPE2DH-26-T-5587, and it is subject to requirements for the removal of government identification from non-accepted supplies and potential classification as covered defense information. The National Stock Number is 6630-12-189-3126, with one package required under purchase request 7017017029, and delivery must be completed within 20 days ADO. The solicitation was issued by the Department of Defense’s Medical Supply Chain FSH with a response deadline of August 4, 2026, and additional details are accessible via the provided DIBBS link.
Analytical Laboratory Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
PROBE, SPARK PLUG, AUTOC
Solicitation # SPE2DH-26-T-5615
The contract specifies the procurement of a single spark plug probe, identified by NSN 6530-01-337-8671 and purchase part number 32510-49940, intended for use on autoclave model 3500 series equipment. The item is not regulated by the FDA and must be furnished in strict compliance with DLA packaging and marking standards, including Medical Marking Standard No. 1, which supersedes MIL-STD-129. All packaging must meet ASTM D3951 requirements, but DLA’s Master List of Technical and Quality Requirements takes precedence, including prohibitions against intentional addition or direct contact with mercury or mercury-containing compounds, except in specific exempted applications such as batteries, fluorescent lights, sensors, and reagents approved by NAVSEA, with portable devices requiring shockproof design and secondary containment. The unit of issue is each, with a contracted quantity of one, to be delivered FOB destination within five days, with zero tolerance for quantity variance. Delivery is required to the USS RICHARD M MCCOOL JR LPD-29 in Pascagoula, Mississippi, and shipment must utilize the fastest traceable means, explicitly prohibiting parcel post. The supplier, GETINGE USA INC, must adhere to all DLA procurement directives, and the item must be labeled and palletized according to RP001 and applicable technical standards. The solicitation was issued under SPE2DH-26-T-5615 with a response deadline of August 5, 2026, and the original delivery requirement is set for July 31, 2026.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334515
New
DIBBS
ANALYZER, BLOOD GLUCOSE
Solicitation # SPE2DH-26-T-5610
The contract is for the Procurement of Prodigy Pocket Blood Glucose Analyzers in kit form, identified by NSN 6630-01-690-1933, with a quantity of two kits required. The device is designed for ease of use, featuring automatic power-on upon test strip insertion, no coding requirement, and a small blood sample size that supports alternate site testing. Results are delivered in seven seconds, with storage for 120 test results including date and time stamps, and calculated 7, 14, and 28-day averages. The unit is compact, lightweight, and optimized for patient convenience. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be securely sealed and shipped in commercial-grade containers ensuring safe delivery at the lowest cost to the specified delivery point in Melrose, Massachusetts. Delivery is required within five days of award. The solicitation is issued under contract number SPE2DH-26-T-5610 by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 5, 2026, and a posting date of July 29, 2026. Technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements apply and are controlled by the revision in effect on the solicitation issue date. The acquisition is subject to DLA packaging standards and the potential applicability of Covered Defense Information. Bidders must specify the source and part number being offered. The point of contact for inquiries is Tina Vu, with contact email and phone provided. The NAICS code for this procurement is 334515, and the supplies are to be delivered under federal procurement regulations with no set-aside designation.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details