Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Military-Spec Packaging and Labeling Services

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Military-Spec Packaging and Labeling Services supports the Department of Defense DLA Weapons Support Maritime Supply Chain. The scope of work involves providing specialized packaging, marking, and labeling for 153 units destined for the DLA Distribution Depot Oklahoma. All work must be performed in strict accordance with RP001 DLA requirements and MIL-STD-129 standards for marking and labeling. To ensure component protection, the contractor must utilize MIL-SPEC anti-corrosion, cushioning, and moisture barrier materials that comply with ASTM D3951. The place of performance for these services is located at Tinker AFB. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

General Info

Military-spec packaging and labeling for 153 DLA units at Tinker AFB per MIL-STD-129.

Agency

Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

NAICS

339999 - All Other Miscellaneous Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-27-T-1416.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GUIDE, VALVE STEM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging, marking, and labeling for prime contractors on DLA Weapons Support Maritime Supply Chain projects. Packages components per RP001 DLA requirements and MIL-STD-129 for marking and labeling. Utilizes MIL-SPEC anti-corrosion, cushioning, and moisture barrier materials in compliance with ASTM D3951. Delivers 153 units packaged and labeled for shipment to DLA Distribution Depot Oklahoma.

Similar Contracts

Same NAICS industry code

Military-Grade Packaging and Labeling ServicesThis subcontract for Military-Grade Packaging and Labeling Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized packaging and labeling for T-Handle components, ensuring all processes adhere to ASTM D3951 for packing and MIL-STD-129 and the DLA Master List of Technical and Quality Requirements for marking and labeling. The contractor is required to use industrial labeling equipment and MIL-SPEC packaging materials to ensure all items are shipment-ready. The final deliverables are to be delivered FOB Origin to DLA Distribution DDSP in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 339999 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Division. Interested parties should note the response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

ESD/EMI Protective Packaging and Marking ServicesThis subcontract involves providing specialized protective packaging and marking services for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work requires the application of Department of Defense qualified ESD and EMI protective packaging in strict accordance with MIL-PRF-81705, MIL-STD-2073-1E, and MIL-STD-129 standards, specifically including Special Marking Code 39. All shielding materials used must be compliant with MIL-PRF-81705 to ensure the integrity of the components. The project requires the final packaged and marked components to be delivered to DLA Dist San Joaquin, with the place of performance located in Tracy, California. This effort falls under NAICS code 339999 and is managed under the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Manufacturer of UV-Sensitive Gaskets (NSN 5330-01-714-4508)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

Log Tube Assembly SupplierThis subcontract involves the supply of 10 Log Tube Assemblies for prime contractors supporting DLA Fleet Readiness Center projects. The supplier is responsible for manufacturing or procuring Container Research Corp part number 17D015-1 in strict accordance with the DLA Master List of Technical and Quality Requirements. Performance takes place in Cherry Point, and the contractor must adhere to specific quality sampling standards per MIL-STD-1916 or ASQ H1331, packaging requirements under ASTM D3951, and labeling guidelines per MIL-STD-129. The agreement mandates full compliance with the Buy American Act and DFARS cybersecurity reporting regulations. This opportunity falls under NAICS code 339999 and is managed by the Department of Defense. Interested parties must meet the response deadline of October 30, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 6 hours ago

DEADLINE

Manufacture and Supply of Plain Oil Seals (NSN 5330-00-485-0788)This subcontract involves the manufacture and supply of 128 precision-manufactured plain oil seals for the DLA Weapons Support Nuclear Reactor Program. The seals must be produced according to NSN 5330-00-485-0788 specifications using either precision machining or molding processes. Compliance with RA001 technical requirements and RP001 packaging standards is mandatory, and all non-accepted government identification must be removed in accordance with RQ011. The project is managed under the Department of Defense and requires delivery of the packaged seals FOB Origin. Performance will take place in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026, falling under NAICS code 339999.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

Aircraft-Grade Material SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, involves the procurement of raw materials and semi-finished components for prime contractors. The scope of work focuses on sourcing and delivering certified aircraft-grade metals, plastics, or upholstery fabrics that strictly adhere to aviation fire, smoke, and toxicity standards. To ensure flight safety and durability, the provider must supply material certifications and maintain ISO 9001:2015 certification. The contract is categorized under NAICS code 339999 and requires the delivery of materials or sub-components to the manufacturer, with the place of performance located in New Cumberland. Interested parties should note the response deadline of October 30, 2026, for this specific supply requirement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services involves providing specialized packaging, preservation, and marking for critical instrumentation intended for prime contractors delivering DLA supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001, specifically utilizing preservation method 41 and cleaning/drying method 1 with mercury-free materials. The final objective is the delivery of properly prepared gages ready for shipment to DLA Distribution San Joaquin. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the contract falls under NAICS code 339999. Performance of these services will take place in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline set for October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Defense-Compliant Packaging and LabelingThis subcontract opportunity involves providing specialized packaging and marking services for prime contractors supporting the Department of Defense under the DLA Weapons Support Land Supply Chain. The selected provider will be responsible for packaging assemblies in strict accordance with ASTM D3951 and RP001 standards, while ensuring all marking and labeling comply with MIL-STD-129. The ultimate goal is to deliver final shipments that are fully packaged, labeled, and ready for immediate transport. The project is categorized under NAICS code 339999 and will be performed in New Cumberland. Interested parties should note that the solicitation was posted on October 22, 2026, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Marking SupplierThis subcontract involves providing comprehensive packaging materials and services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The scope of work includes the packing, marking, and labeling of items to ensure they are shipment ready for FOB Origin delivery. All operations must be performed at Hill AFB and adhere to strict military and industry specifications. Technical requirements mandate that packing be executed according to ASTM D3951 and RP001 standards, while all marking and labeling must comply with MIL-STD-129. The supplier is required to utilize specialized labeling equipment capable of producing military-standard markings. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026, under NAICS code 339999.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of Specialized Cushions (NSN 8320-LNCC-3641)This subcontract involves the manufacture or procurement of 50 specialized cushions for prime contractors supporting the Department of Defense DLA Fleet Readiness Center. The deliverables must strictly adhere to NSN 8320-LNCC-3641 and part number 426E004–3 specifications. Quality assurance requires sampling conducted according to MIL-STD-1916 or ASQ H1331, with marking and packaging following RQ017 and RP001/QUP:001 standards. The project is categorized under NAICS code 339999 and will be performed in Cherry Point. Interested parties must respond by October 30, 2026, to fulfill the requirements of the DLA Fleet Readiness Center DLA PSC.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 6 hours ago

DEADLINE

Electronic Shielding Gasket ManufacturerThis subcontract involves the manufacture of 48 electronic shielding gaskets, identified by NSN 5999-01-222-0064, for the DLA Weapons Support Active Devices Division. The selected manufacturer will fabricate these gaskets using conductive elastomers, metals, or composites to provide essential EMI/RFI protection. All production must adhere to strict quality assurance testing standards per MIL-STD-1916 or ASQ H1331, and bare item marking must be completed according to RQ017. Additionally, the use of Class I ozone-depleting substances is strictly prohibited. The project falls under NAICS code 339999 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 2, 2026, for this specific procurement effort.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Aerospace Kitting and PackagingThis subcontract for MIL-SPEC Aerospace Kitting and Packaging involves performing specialized kitting and packaging services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the packaging of actuator components in strict accordance with MIL-STD-2073-1 Appendix D and the marking of shipments per MIL-STD-129. To ensure the integrity of the components, the contractor must utilize specialized cushioning and containment materials while maintaining accurate documentation for all part numbers and National Stock Numbers. The final deliverable consists of three fully packaged and marked Actuator Parts Kits. This project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division, with the place of performance located at Hill AFB. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 339999.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

Same awarding agency

Supply of Piston Rings (NSN 4310017062926)This subcontract involves the supply of piston rings, specifically RIX INDUSTRIES part number 18-20420-8R1 under NSN 4310017062926, to support prime contractors fulfilling DLA supply contracts. The agreement requires the delivery of 16 units to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict military standards for logistics, including packaging items according to MIL-STD-2073-1E and marking shipments per MIL-STD-129. Shipments are required to utilize specified D3 unit containers and E5 intermediate containers. This procurement is managed under the Department of Defense through the DLA Weapons Support Maritime Supply Chain.

Industrial Supplies Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Electronic Component Assemblies (NSN 5998-01-285-9173)This subcontract involves the manufacture and supply of seven specialized electronic component assemblies for the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for fabricating and assembling these components in strict accordance with technical specifications for NSN 5998-01-285-9173, utilizing military-grade electronics assembly equipment. Performance of the contract will take place in Tracy, California. To be eligible, the provider must meet rigorous security standards, including a CMMC Level 2 self-assessment and full DFARS cybersecurity compliance. The project falls under NAICS code 334418 and is managed under the Department of Defense. Interested parties must respond by November 2, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 6 hours ago

DEADLINE

Military Grade Packaging and Marking ServicesThis subcontract for Military Grade Packaging and Marking Services supports prime contractors delivering DLA supply contracts through the Department of Defense, specifically the DLA Weapons Support Maritime Supply Chain. The service provider is responsible for the specialized packaging, marking, and palletization of units to ensure they are fully prepared for FOB Origin shipment. All work must be performed in strict accordance with ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization, utilizing military-grade materials. The performance of this contract takes place in San Diego, California, under NAICS code 488410. Interested parties should note that the solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

Motor Vehicle Towing

POSTED

about 6 hours ago

DEADLINE

Power Distribution Panel SupplierThis subcontract opportunity, issued by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, requires the procurement of one Power Distribution Panel with NSN 6110-01-564-8757. The selected supplier is responsible for manufacturing or sourcing the panel in strict accordance with NSN specifications, ensuring full compliance with DFARS 252.225-7001. Quality assurance must be maintained per MIL-STD-1916 or ASQ H1331 standards, and the final product must be delivered to DLA Distribution San Diego. For those submitting alternate offers, the contractor must provide comprehensive manufacturing drawings and shock extension reports that meet MIL-S-901 requirements. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026. This requirement falls under NAICS code 335313 and is intended for prime contractors supporting DLA supply contracts.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 6 hours ago

DEADLINE

Power Supply Unit (NSN 6120-01-696-4869)This subcontract involves the provision of one Powerstar Inc. power supply unit, part number PS6000-1DSP-R2, for the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for ensuring the unit is packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. Additionally, the supplier must maintain compliance with DLA Master Lists RA001 and RP001, as well as the Buy American and Balance of Payments Program. The delivery of the single power supply unit is designated as FOB Origin, with the place of performance located in Tracy, California. This requirement falls under NAICS code 334419 and is managed by the Department of Defense. The response deadline for this opportunity is November 2, 2026.

Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and International Shipping ServicesThis subcontract for MIL-SPEC Packaging and International Shipping Services supports the Department of Defense through the DLA Weapons Support Maritime Supply Chain. The selected provider will perform specialized military packaging and international shipping for prime contractors, specifically focusing on hardware destined for Yokosuka, Japan. All work must adhere to RP001 packaging standards and MIL-STD-129 marking requirements, utilizing MIL-SPEC cushioning and dunnage that contains no Class I ozone-depleting chemicals. The contractor is responsible for delivering fully packaged, marked, and manifested shipments that are ready for immediate transport. This opportunity falls under NAICS code 488510 and was posted on October 22, 2026, with a response deadline of November 2, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Precision Manufacturing of Valve Seats (NSN 4820-01-679-2152)This subcontract involves the precision manufacturing of 50 valve seats, identified by NSN 4820-01-679-2152, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The project requires the fabrication of components using precision CNC machining in strict accordance with Basic Drawing NR 16236 RE-016792152 to ensure all dimensional and material tolerances are met. The contractor must maintain full compliance with DFARS 252.204-7012 and provide comprehensive C03 Supply Chain Traceability Documentation. This effort falls under NAICS code 332999 and is managed through the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of MIL-SPEC Electrical Wire (NSN 6145009289896)This subcontract involves the supply of 5,000 feet of electrical wire for prime contractors supporting DLA Weapons Support Maritime Supply Chain projects. The materials must be manufactured or sourced in strict accordance with NSN 6145009289896, ANSI/NEMA HP3-2012, and MIL-DTL-12000 standards. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 specifications, with final delivery designated as FOB Origin to DLA Distribution DSP New Cumberland. The contractor is required to maintain full compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. This procurement falls under NAICS code 331420 and is managed by the Department of Defense. Interested parties must adhere to the established response deadline of November 2, 2026.

Copper Rolling, Drawing, Extruding, and Alloying

POSTED

about 6 hours ago

DEADLINE

Supply of Electronic Test Extender Cards (PN: 111EXT6122-012X)This subcontract involves the manufacture or procurement of five specialized electronic test extender cards, specifically part number 111EXT6122-012X, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The project requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 standards for packaging and marking, with performance taking place in Tracy, California. To be eligible, contractors must comply with the Buy American Act and complete a CMMC Level 2 self-assessment to ensure the secure handling of Covered Defense Information. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026, under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Freight Services

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Power Transformers (P/N 80P433CT)

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS