Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military-Spec Packaging and Preservation Provider

Active

Response Deadline10/13/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity with the Department of the Navy and DLA Mechanicsburg involves providing specialized preservation, packing, and marking services for sensitive electronic equipment, specifically PLC Controller Assemblies. The provider must ensure all deliverables are ready for shipment by adhering to strict military standards, including MIL-STD-130 for physical identification, MIL-STD-129 for shipping container preparation, and MIL-STD-2073 for preservation. The scope of work requires the application of Depot Level Repairable labels using ESD-safe packaging materials to protect sensitive components. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 488510. Interested parties must submit their responses by the deadline of October 13, 2026.

General Info

Navy subcontract for electronic equipment preservation and packing in Mechanicsburg, PA by October 2026.

Agency

Department Of The Navy → SPRMM1 DLA Mechanicsburg

NAICS

488510 - Freight Transportation Arrangement

Place of Performance

MECHANICSBURG, PA, 17055-0788, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM1-26-Q-MJ73.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PLC CONTROLLER ASSY — 5998016674038 — SPRMM126QMJ73

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 23

subcontract

Response DeadlineOct 13

Submission deadline

Response Deadline

10/13/2026, 08:30:00 PM UTCin 19 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → SPRMM1 DLA Mechanicsburg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs preservation, packing, and marking for sensitive electronic equipment for prime contractors on DLA/NAVSUP projects. Executes physical identification per MIL-STD-130, shipping container preparation per MIL-STD-129, and preservation per MIL-STD-2073. Applies Depot Level Repairable (DLR) labels using ESD-safe packaging materials. Delivers marked, preserved, and packaged PLC Controller Assemblies ready for shipment.

Similar Contracts

Same NAICS industry code

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services supports prime contractors delivering DLA Land and Maritime hardware. The service provider is responsible for packaging critical components according to ASTM D3951 standards and managing all associated logistics, including the generation of shipping documentation, invoices, and receiving reports for delivery to designated DoDAAC offices. The contract is managed by the Department of Defense under the Fluid Handling Division, with performance taking place in Cherry Point, ZIP 28533-5040. Under NAICS code 488510, the provider must ensure all materials are ASTM D3951 compliant and that all hardware is properly packaged and labeled before delivery to government destinations. The response deadline for this opportunity is October 5, 2026.

FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services, managed by the Department of Defense Active Devices Division, involves specialized packaging and marking of electronic components for prime contractors on DLA supply contracts. The work is performed at Tinker AFB and requires strict adherence to RP001, MIL-STD-2073-1E, and RQ017 standards, utilizing A1 unit and D3 intermediate containers. The scope includes applying bare item marking and Special Marking Code ZZ in accordance with MIL-STD-129, with final delivery of components packaged and marked for FOB Origin shipment. The solicitation was posted on September 24, 2026, with a response deadline of October 5, 2026, under NAICS code 488510.

ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThis subcontract for Hazardous Materials Packaging and Labeling Services supports Department of Defense Maritime Supply Chain projects. The contractor is responsible for the specialized packaging, marking, and labeling of mercury-containing headsets for prime contractors. All work must adhere to strict regulatory standards, including hazard labeling per 29 CFR 1910.1200, marking per MIL-STD-129, and mercury containment protocols as specified by NAVSEA 5100-003D. The scope of work involves utilizing rated containment packaging to ensure all shipments are compliantly prepared for FOB Origin transport. This effort falls under NAICS code 488510 and requires precise execution of safety and shipping protocols to meet federal maritime supply chain requirements.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

MIL-STD-129 Packaging and Palletization ServicesThis subcontract for the Department of Defense Fluid Handling Division involves providing military-grade marking, packaging, and palletization services for prime contractors on DLA Land and Maritime supply contracts. The scope of work requires marking deliverables in accordance with MIL-STD-129 and palletizing shipments based on RP001 DLA Packaging Requirements. Additionally, the provider must ensure hazardous materials are labeled per 29 CFR 1910.1200 using industrial palletizing equipment and compliant marking tools to prepare shipments for DLA Distribution. The project is categorized under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by October 5, 2026, following the posting date of September 24, 2026.

FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

UV-Protective Waterproof Packaging ServicesThis subcontract for UV-Protective Waterproof Packaging Services involves providing specialized packaging for prime contractors on DLA supply contracts. The service focuses on items sensitive to ultraviolet rays, requiring the use of medium duty, waterproof, greaseproof, and opaque bags to prevent deterioration in accordance with FSC 5330/5331 requirements. The contractor is responsible for utilizing specialized opaque bagging materials to seal and deliver the end items. The project is managed by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, with performance taking place in Tracy, California. The opportunity is categorized under NAICS code 488510. Interested parties must respond by October 5, 2026, following the posting date of September 24, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

Preservation, Packaging, and Shipping ServicesThis subcontract with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the preservation, military-grade packaging, and shipping of 62 transmitter control units for prime contractors on DLA supply contracts. The service provider must utilize anti-static packaging, moisture-barrier bags, and military-grade crates in strict accordance with Mil-Spec standards to prevent corrosion and damage, ensuring full compliance with military preservation requirements. The project falls under NAICS code 488510 and includes the final delivery of the packaged units to their designated destination. The solicitation was posted on September 24, 2026, with a response deadline of October 26, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in about 1 month

HazMat Packaging and Shipping SpecialistThe HazMat Packaging and Shipping Specialist subcontract, posted on September 24, 2026, involves providing specialized packaging, labeling, and shipping services for prime contractors on DLA supply contracts. The scope of work focuses on the handling of UV-sensitive and hazardous items, requiring strict adherence to MIL-DTL-117, TYPE II, CLASS C, STYLE 1 for packaging, DFARS 252.223-7001 for hazard labeling, and MIL-STD-129 for marking. Logistics are coordinated per IP025, utilizing UV-protective shielding to ensure the safe delivery of materials to their final destination. This opportunity falls under NAICS code 488510 and is managed by the Department of Defense under the Land Supplier Opns Vehicle Spt agency. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of September 29, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

DLA Compliant Packaging and ShippingThis subcontract opportunity, titled DLA Compliant Packaging and Shipping, is a Total Small Business Set-Aside under NAICS code 488510 for the Department of Defense, specifically the Land Supplier Opns Vehicle Spt. The contractor will provide specialized packaging and shipment preparation for prime contractors on Defense Logistics Agency supply contracts, with performance taking place in New Cumberland, Pennsylvania. The scope of work involves packaging mechanical components according to RP001 DLA Packaging Requirements and ensuring hazardous materials are labeled in compliance with 29 CFR 1910.1200. Using military-grade preservation, cushioning, and sealing materials, the contractor is responsible for delivering units that are fully labeled and ready for government transport. The response deadline for this opportunity is October 5, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services involves providing specialized packaging, marking, and labeling for prime contractors delivering DLA supply contracts. The scope of work specifically requires the packaging and labeling of two Gate Arms, ensuring all processes adhere to ASTM D3951, MIL-STD-129, and RP001 DLA Packaging Requirements for Procurement. All materials used must be compliant with military transport standards to ensure safe delivery. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 488510 and was posted on September 24, 2026, with a response deadline of October 1, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

DLA Compliant Palletization and Packaging ServicesThis subcontract for DLA Compliant Palletization and Packaging Services involves providing specialized packaging and palletization for prime contractors supporting Defense Logistics Agency supply contracts. The service provider is responsible for executing the palletization of hardware in strict accordance with RP001 requirements using DLA-approved materials to ensure shipments are ready for final agency acceptance. The contract is managed by the Fluid Handling Division of the Department of Defense under NAICS code 488510, with the place of performance located in Tracy, California. Interested parties must submit their responses by October 5, 2026, following the posting date of September 24, 2026.

FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

MIL-SPEC Packaging and Labeling ServicesThis subcontract for MIL-SPEC Packaging and Labeling Services supports prime contractors delivering supply contracts for DLA Land and Maritime. The service provider is responsible for the specialized packaging, marking, and labeling of valves to ensure they are securely prepared for government transport and inventory. All work must strictly adhere to ASTM D3951 and RP001 DLA Packaging Requirements for Procurement, with marking and labeling performed according to MIL-STD-129 using compliant materials. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by the deadline of October 5, 2026. The project falls under NAICS code 488510 and is accessible via the DIBBS procurement portal.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Land and Maritime supply contracts. The provider is responsible for performing specialized military-grade packaging, marking, and palletization of valves to ensure they are ready for shipment and destination inspection. All work must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, as well as DLA requirement RP001 for palletization, utilizing approved MIL-SPEC materials and equipment. The contract is associated with the Department of Defense and the Jacksonville Bldg agency, with the place of performance located in Jacksonville, Florida. Under NAICS code 488510, the response deadline for this opportunity is October 5, 2026.

JACKSONVILLE BLDG

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of The Navy → SPRMM1 DLA Mechanicsburg

Same awarding agency

DLR Packaging and Labeling ServicesThis subcontract for DLR Packaging and Labeling Services, managed by the Department of the Navy's SPRMM1 DLA Mechanicsburg office, involves providing specialized packaging and labeling for prime contractors on Department of Defense supply contracts. The contractor is responsible for affixing DLR labels to unit, intermediate, and shipping containers according to Naval Forms Online guidelines and managing reusable non-wood or fiberboard containers for items with Cognizance Code 7 or even numbers. The primary objective is to deliver hardware that is properly labeled and packaged for government acceptance. This opportunity falls under NAICS code 561990 and is based in Mechanicsburg, Pennsylvania. The response deadline for this requirement is October 14, 2026.

All Other Support Services

POSTED

DEADLINE

Supply of RF/Microwave Raw Materials and Sub-componentsThis subcontract through the Department of the Navy and DLA Mechanicsburg involves the supply of RF and microwave raw materials and sub-components for prime contractors. The scope of work includes sourcing high-frequency conductive materials, precision-machined RF housings, and Low Noise Amplifier semiconductor components that meet reference number 2099-173. All deliverables must include batch identification, date codes, and CDAP compliance documentation to ensure certified quality. The opportunity is categorized under NAICS code 334413 and is based in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by October 14, 2026, following the posting date of September 24, 2026.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Manufacture of TRIPLEXER/LNA FROMThis subcontract involves the manufacture of TRIPLEXER/LNA FROM hardware for prime contractors supporting Department of Defense supply contracts. The work is performed for the Department of the Navy via SPRMM1 DLA Mechanicsburg, with performance taking place in Mechanicsburg, Pennsylvania. Production must adhere to Cage Code 60188 and reference number 2099-173, utilizing specialized RF/Microwave manufacturing equipment. The contractor is required to provide comprehensive supply chain traceability and maintain strict compliance with Counterfeit Detection and Avoidance Program standards. This opportunity falls under NAICS code 334220, with a response deadline of October 14, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Supply of Actuator Assembly (NIIN 017160028)This subcontract involves the supply of actuator assemblies under NIIN 017160028 for prime contractors supporting DLA supply contracts. The provider is responsible for manufacturing or sourcing components, ensuring all items are marked according to MIL-STD-129 and accompanied by comprehensive supply chain traceability documentation. Deliverables include the physical actuator assembly and required MSDS documentation in compliance with OSHA and FED STD 313. The contractor must maintain an ISO 9001 quality system and possess the necessary UID marking equipment for high-value units. This requirement is managed through the Department of the Navy for the SPRMM1 DLA Mechanicsburg agency, with performance centered in Mechanicsburg, Pennsylvania. The response deadline for this opportunity is October 26, 2026.

Other Industrial Machinery Manufacturing

POSTED

DEADLINE

in about 1 month

BALLUN DIPOLE — 5985011135690 — SPRMM126QGG29

Solicitation # SPRMM1-26-Q-GG29

This solicitation is for the manufacture and supply of Ballun Dipoles, awarded based on the Lowest Price Technically Acceptable criteria. The contract is a total small business set-aside and requires the use of Wide Area Workflow (WAWF) for the electronic submission of invoices and receiving reports. It specifies that the items must be physically identified according to MIL-STD-130 and packaged per MIL-STD 2073. Contractors must identify the Original Equipment Manufacturer and their CAGE code if they are not the manufacturer. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless it is a simple part number change. The government maintains the right to perform inspections to ensure compliance, and all inspection records must be kept for 365 days following final delivery. Performance at any facility other than the one named in the contract is prohibited without prior written approval and a corresponding administrative fee.

Other Electronic Component Manufacturing

POSTED

DEADLINE

in about 1 month

LEAD,TEST — 6625014957550 — SPRMM126QGG59

Solicitation # SPRMM1-26-Q-GG59

This solicitation is for the manufacture and supply of test leads, identified by specific cage codes and reference numbers. The requirement is a total small business set-aside and follows a fixed-price structure. Key compliance mandates include the Buy American Act, the use of Wide Area Workflow (WAWF) for electronic invoicing and receiving reports, and adherence to MIL-STD-130 for physical identification and MIL-STD-2073 for packaging. Contractors must provide proof of authorized distributorship if they are not the original equipment manufacturer. The government requires strict adherence to production facility locations, with any changes requiring written approval and a fee. Quality assurance is the responsibility of the contractor, though the government reserves the right to perform inspections. All contractual documents are considered issued upon electronic transmission or mail delivery.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

ACTUATOR ASSY — 4810017160028 — SPRMM126QGG36

Solicitation # SPRRM1-26-Q-GG36

This solicitation, issued by DLA Mechanicsburg for the Department of the Navy, is a request for quotation for the manufacture and supply of an Actuator Assembly (NSN 4810-01-716-0028). The procurement is conducted as a small business-small purchase under FAR Part 18 Emergency Acquisition Flexibilities, with the award based on the Lowest Price Technically Acceptable (LPTA) criteria. The primary deliverable is the Actuator Assembly, which must be physically identified according to MIL-STD-129 and MIL-STD-130. The contractor is required to maintain a quality system compliant with ISO 9001 and is responsible for all inspection requirements at the point of origin. Critical technical requirements include a strict prohibition of metallic mercury and mercury contamination, as the item is intended for use on submarines and surface ships. Any necessary use of mercury requires prior written approval from the Procurement Contracting Officer. The contract mandates the use of Wide Area Workflow (WAWF) for electronic invoicing and payment. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number. Packaging must adhere to MIL-STD 2073, and the delivery schedule is set as ASAP. Evaluation of offerors will include risk assessments via the Supplier Performance Risk System (SPRS) regarding item, price, and supplier performance.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

DEADLINE

in about 1 month

VALVE REG, 4.0 IPS — 4820016411432 — SPRMM126QGF73

Solicitation # SPRMM1-26-Q-GF73

This solicitation from DLA Mechanicsburg is for the manufacture and supply of a 4.0 IPS regulator valve, specifically referencing Cage Code 55378 and part number 40737-204 with a 55PSIG set pressure. The contract will be awarded based on the Lowest Price Technically Acceptable criteria. Requirements include physical identification per MIL-STD-130 and packaging according to MIL-STD 2073. Key administrative mandates include the use of the Wide Area Workflow (WAWF) for electronic invoicing and receiving reports via the PIEE portal. Offerors who are not the original equipment manufacturer must identify the OEM and their CAGE code. The contract prohibits unauthorized changes to production facilities and requires strict adherence to design and part number substitution codes. All contractual documents are considered issued upon electronic transmission, and authorized distributors must provide proof of authorization on company letterhead to be considered for award.

Industrial Valve Manufacturing

POSTED

DEADLINE

in about 1 month

TRIPLEXER/LNA FROM — 5985016050130 — SPRMM126QGF22

Solicitation # SPRMM1-26-Q-GF22

Solicitation SPRMM1-26-Q-GF22, issued by DLA Mechanicsburg for the Department of the Navy, seeks quotations for the manufacture and delivery of the TRIPLEXER/LNA FROM (NSN 5985-01-605-0130). The required hardware must conform to the design represented by Cage Code 60188, reference number 2099-173, and adhere to TDP Version 003. Delivery is requested as soon as possible with FOB Origin terms. The contract mandates strict adherence to quality assurance standards, requiring the contractor to maintain inspection records for 365 days post-delivery and follow physical identification requirements per MIL-STD-130. Packaging and marking must comply with MIL-STD-2073-1, MIL-STD-129, and MIL-STD-147, with specific packing levels based on whether the shipment is domestic or overseas. Award will be determined using either the Lowest Priced Technically Acceptable (LPTA) methodology or a Most Advantageous selection process, where past performance is weighted more heavily than price. Offerors must be authorized distributors of the original manufacturer and provide proof of authorization on company letterhead. The contract incorporates several critical regulatory requirements, including a DO priority rating for national defense, Buy American and Balance of Payments program certifications, and cybersecurity compliance via DFARS 252.204-7012. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

VGD Device Assembly SupplierThis subcontract involves the manufacture and procurement of the VGD Device Assembly, identified by NIIN 016454138, for prime contractors supporting U.S. Navy and DLA supply contracts. The supplier must produce the assembly in strict accordance with technical drawings and DODSSP specifications, ensuring all physical units are delivered alongside comprehensive traceability documentation. The contractor is required to maintain detailed inspection records for 365 days and adhere to Counterfeit Detection And Avoidance Program standards for supply chain traceability. Additionally, the supplier must comply with OPNAVINST 5510.1 regarding distribution-limited documents. This opportunity is managed by the Department of the Navy through DLA Mechanicsburg under NAICS code 334419, with a response deadline of October 23, 2026.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Manufacture and Supply of AC Motor (NIN: 996139903)This subcontract involves the manufacture and supply of a contract-quality AC Motor, identified by NIN 996139903, for prime contractors supporting NAVSUP Weapons Systems Support projects under the Department of the Navy. The motor must be fabricated according to the design specifications of Cage Code KC56A A/445TNS/37 and delivered to Mechanicsburg, Pennsylvania. The contractor is required to adhere to strict military and federal standards, including marking per CMIL-STD-130 and packaging per MIL-STD-2073. Additionally, the provider must ensure full supply chain traceability in accordance with CDAP and provide MSDS documentation as mandated by OSHA and FED STD 313. All finished motors must be delivered with the necessary accompanying traceability documentation.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

PLC Controller Assembly ManufacturerThis subcontract involves the manufacture of PLC Controller Assemblies for prime contractors supporting DLA and NAVSUP projects under the Department of the Navy. The manufacturer is responsible for fabricating and assembling components according to Cage Code 28953 design A76-21224D, while strictly adhering to ANSI/ESD S20.20-2021 electrostatic discharge protocols. The contract requires the implementation of Counterfeit Detection and Avoidance Program standards and the provision of comprehensive supply chain traceability, including batch and lot codes. Final deliverables consist of the completed PLC Controller Assemblies and all associated traceability documentation. The project is associated with NAICS code 334419 and is managed through the SPRMM1 DLA Mechanicsburg office, with performance located in Mechanicsburg, Pennsylvania.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS