Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Military Specification Packaging and Palletization Services

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Military Specification Packaging and Palletization Services involves providing specialized logistics support for prime contractors under DLA supply contracts. The scope of work requires the packaging of 18,000 electronic regulators in strict accordance with MIL-STD-2073-Ie, the application of markings per MIL-STD-129, and shipment preparation following RP001 guidelines. To ensure component integrity, the contractor must utilize anti-static and moisture-barrier materials along with compliant labeling systems. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the project falls under NAICS code 493110. The primary objective is the delivery of 18,000 fully packaged and palletized units ready for government shipment. The solicitation was posted on October 16, 2026, with a response deadline of October 23, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

493110 - General Warehousing and Storage

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-Q-0100.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

REGULATOR, VOLTAGE AND

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 16

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging, marking, and palletization for prime contractors on DLA supply contracts. Packages 18,000 electronic regulators per MIL-STD-2073-Ie, applies markings per MIL-STD-129, and prepares shipments per RP001. Utilizes anti-static and moisture-barrier materials and MIL-STD-129 compliant labeling systems. Delivers 18,000 units packaged and palletized for government shipment.

Similar Contracts

Same NAICS industry code

Warehouse Storage Facility ProviderThis subcontract agreement establishes a Warehouse Storage Facility Provider to support prime contractors on Texas Commission on Environmental Quality storage projects. The provider is responsible for supplying 84,000 square feet of industrial warehouse space specifically designed for the secure, climate-appropriate storage of Haworth Modular Furniture. The facility must be equipped with loading docks and material handling access to ensure efficient logistics and operational flow. The provider is tasked with maintaining the facility according to strict technical specifications while ensuring full compliance with the Texas Government Code and TINS registration requirements. The scope of work focuses on the delivery of leased warehouse space and the provision of ongoing monthly storage services to meet the agency's logistical needs.

Texas Commission on Environmental Quality

POSTED

about 20 hours ago

DEADLINE

FMG Modular Storage

Solicitation # 582-27-17661

The Texas Commission on Environmental Quality is soliciting bids for the rental of up to 7,000 square feet of warehouse storage space to house Haworth systems furniture parts and components. The facility must be located within a 25-mile radius of Austin, Texas, and must be secure, climate-controlled, and free of hazardous materials. The awarded vendor is responsible for transferring all modular furniture from the current location to the new facility at no cost to the agency within 14 days of the award. Operational requirements include staffing the warehouse from 8:00 am to 5:00 pm, Monday through Friday, and maintaining inventory using software compatible with Word and Excel. To ensure quality and security, the agency will conduct quarterly site inspections, and all furniture must be stored separately from other equipment using approved methods like heavy plastic sheets. Bids will be evaluated based on the lowest line item or total cost, provided the bidder meets technical specifications and provides at least two references for similar services. Submission deadlines are set for October 30, 2026, at 2:00 PM Central Time. Applicants must comply with various state and federal regulations, including certifications regarding child support eligibility, human trafficking prohibitions, and restrictions on business with designated foreign entities. Additionally, vendors must provide an Employer Identification Number for payment and ensure any personnel accessing agency computer systems complete required cybersecurity training. Payment is governed by Chapter 2251 of the Texas Government Code, requiring itemized invoices with the TCEQ Order Number.

Texas Commission on Environmental Quality

POSTED

about 20 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing specialized military-grade packaging, marking, and palletization services for the DLA Weapons Support Maritime Supply Chain. The scope of work requires the processing of 74 individually packaged, marked, and palletized filter elements for delivery to DLA Distribution Jacksonville. All operations must be executed using military-standard marking and labeling equipment to ensure full compliance with strict Department of Defense specifications. Technical execution must adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. The project falls under NAICS code 493110 and is managed through the Department of Defense. Interested parties should note the response deadline of October 29, 2026, for this specific requirement.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract with C AND T Supply Chain for the Department of Defense involves providing specialized military packaging, marking, and palletization services for prime contractors on DLA Troop Support supply contracts. The scope of work requires the processing of 30,000 units of insignia, ensuring all shipments are packaged and marked according to MIL-STD-2073-1E and MIL-STD-129, and palletized in accordance with DLA requirement RP001. The contractor must utilize approved MIL-SPEC wraps, cushions, and standardized military shipping pallets to ensure compliance. The final deliverables are to be shipped FOB Destination to Phoenix, Arizona. This opportunity falls under NAICS code 493110, with a response deadline set for October 23, 2026.

C AND T SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

CONEX Container Possession, Care, and RelocationThis subcontract for the Department of Commerce NOAA involves the possession, care, and relocation of Government Furnished Equipment for prime contractors on NOAA/NWS projects. The scope of work requires the secure storage and inventory management of 40ft CONEX containers, including their relocation from Shrewsbury, MA, to various radome sites via heavy-haul trucking. The selected provider must maintain a secure warehouse facility to hold custody records and perform monthly physical audits. Key deliverables include the successful transport of containers and the submission of monthly inventory reports. The performance of these services is centered in Norman, with a response deadline set for October 30, 2026.

Department Of Commerce Noaa

POSTED

DEADLINE

IFB 26-41111-000 Off-Site Records Storage and Retention Services

Solicitation # 26-41111-000

The California Department of State Hospitals (DSH) Napa has issued Invitation for Bid 26-41111-000 for off-site records storage and retention services. The anticipated contract term runs from November 14, 2026, through November 13, 2029. The selected contractor will be responsible for providing all equipment, personnel, and transportation necessary to manage the storage, retrieval, and permanent removal of DSH data, which includes highly confidential patient protected health information. Key requirements include the implementation of a barcode tracking system and strict adherence to HIPAA compliance as a Business Associate, as well as meeting Title 22 California Code Regulations. Bids are due by November 2, 2026, at 2:00 PM. The contract will be awarded to the lowest responsive and responsible bidder, with a five percent preference granted to certified California Small Businesses or Microbusinesses. To be considered responsive, bidders must submit a comprehensive package including thirteen required attachments, such as a rate sheet, insurance certifications, and various legal declarations. The contractor must also maintain performance and payment bonds not less than the contract price and comply with rigorous security protocols, including potential fingerprinting and drug testing for personnel accessing state grounds. Invoicing is to be submitted monthly in arrears to the DSH Napa accounting office.

California Department of State Hospitals

POSTED

DEADLINE

Warehousing and StorageThis subcontract for Warehousing and Storage supports prime contractors on Utah Office of Tourism projects by providing secure, climate-controlled storage for printed materials and publications. The selected vendor is responsible for comprehensive inventory management and must certify that they possess sufficient warehouse capacity to accommodate all required materials to ensure they remain ready for distribution. The opportunity is issued by the state of Utah under NAICS code 493110. Interested parties must submit their responses by the deadline of November 5, 2026, following the posting date of October 15, 2026.

POSTED

DEADLINE

Fulfillment and Distribution ServicesThis subcontract for Fulfillment and Distribution Services involves the picking, packing, and shipping of tourism publications and promotional materials for prime contractors working on Utah Office of Tourism projects. The selected provider will be responsible for processing individual and bulk case-quantity requests, executing mail distribution strategies, and performing domestic and international bulk mail presorts. To ensure operational success, the contractor must utilize warehouse management systems and specialized bulk mail presort equipment. Qualified candidates must possess at least five years of experience in guide distribution to effectively deliver publications to travelers and partners. This opportunity is categorized under NAICS code 493110 and was posted on October 15, 2026, with a response deadline of November 5, 2026.

POSTED

DEADLINE

MIL-SPEC Packaging and Fulfillment ServicesThis subcontract for MIL-SPEC Packaging and Fulfillment Services supports the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project requires specialized military packaging, marking, and cushioning for prime contractors, with strict adherence to MIL-STD-2073-1 Appendix D and MIL-STD-129 for bar-coding and marking. The scope of work involves using military-grade labeling equipment and MIL-SPEC cushioning to produce 354 individually packaged kits, each including a detailed contents list, prepared for FOB Origin shipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 493110, with performance taking place in New Cumberland, Pennsylvania. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports the DLA Weapons Support Aviation Supply Chain. The selected provider will perform specialized packaging, marking, and palletization of aviation hardware for prime contractors. All work must strictly adhere to military standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization, utilizing approved military-specification cushioning and dunnage. The final deliverables consist of fully processed shipments ready for FOB Origin transport to Cherry Point, North Carolina. This opportunity falls under NAICS code 493110 and is managed by the Department of Defense. Interested parties should note the response deadline of October 23, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

MIL-STD-129 Compliant Packaging and LabelingThis subcontract involves providing specialized military packaging, marking, and labeling services for electrical components intended for prime contractors delivering to the Defense Logistics Agency. The scope of work requires strict adherence to TQ requirement IP025 and ASTM D3951 for packaging, while all marking and labeling must comply with MIL-STD-129 and RP001 standards. The contractor is responsible for utilizing compliant labeling systems and commercial packaging materials to ensure all shipments are fully prepared for delivery to DLA Distribution San Joaquin. Managed under the Department of Defense through the DLA Weapons Support Active Devices Division, the project is categorized under NAICS code 493110. Performance of these services will take place in Tracy, California. Interested parties should note the response deadline of October 26, 2026, to ensure all requirements for this specialized logistics support are met.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Defense-Compliant Packaging and Palletization ServicesThis subcontract for Defense-Compliant Packaging and Palletization Services supports the DLA Weapons Support Aviation Supply Chain. The selected provider will perform specialized packaging, marking, and palletization for 101 shear bolts destined for FOB delivery. All work must strictly adhere to ASTM D3951 for packaging, MIL-STD-129 and MIL-STD-130N for markings, and DLA requirement RP001 for palletization. The project is located in Cherry Point, North Carolina, and requires the contractor to be proficient in the DLA Wide Area WorkFlow system. Interested parties must respond by October 23, 2026, regarding this effort categorized under NAICS code 493110.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Lock Pins for Submarine SwitchboardsThis subcontract involves the procurement of specialized lock pins, identified by NSN 5315-01-470-2949, intended for prime contractors supporting Department of Defense submarine switchboard assemblies. The selected provider is responsible for manufacturing or sourcing the pins and ensuring each unit is marked with a Unique Item Identifier using two-dimensional data matrix symbology in accordance with ISO/IEC 16022 standards. Strict adherence to supply chain traceability requirements per C03 is mandatory, necessitating the use of specialized UID marking equipment. The contract is managed under the DLA Weapons Support ASC Supplier OE and AF Division with a NAICS code of 332722. Logistics require the physical delivery of the lock pins to DLA New Cumberland, while the corresponding UID data must be submitted electronically via the Wide Area Workflow system.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract opportunity, titled Aerospace Surface Treatment and Coating, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division. The project involves providing specialized surface treatments, anodizing, and protective coatings for structural plates used by prime contractors. All work must be performed using controlled chemical processing in strict accordance with Drawing 81205 BAC5300, with mandatory verification of coating thickness and adhesion to meet aerospace standards. The contract is designated as a Total Small Business Set-Aside under NAICS code 332813. Qualified bidders must maintain ISO 9001:2015 certification and ensure full compliance with FED-STD-313 for the handling of hazardous materials. The solicitation was posted on October 16, 2026, with a response deadline of October 23, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 21 hours ago

DEADLINE

Supply of Certified Aircraft-Grade Structural Plate StockThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves the supply of certified aircraft-grade structural plate stock for prime contractors. The materials must strictly adhere to the alloy and temper specifications outlined in Drawing 81205 BAC5300. To ensure quality and regulatory compliance, the provider is required to deliver full traceability for all raw material, accompanied by Material Test Reports and Certificates of Conformance that meet the standards of the Buy American Act and DFARS counterfeit part detection protocols. The opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 336413. Interested parties must respond by October 23, 2026, following the posting date of October 16, 2026. This contract focuses on maintaining high-grade material integrity for critical defense projects through rigorous certification and documentation requirements.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Precision Machining of Structural Aircraft PlateThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, involves the precision machining, milling, and finishing of structural aircraft plates, specifically part number 5-70764-1029. The work must be executed according to Engineering Note EI-016505406 and Reference Drawing 81205 BAC5300. Quality assurance requires the use of calibrated Measuring and Test Equipment per RT001 and adherence to sampling standards MIL-STD-1916 or ASQ H1331. The opportunity is a total small business set-aside under NAICS code 336413. To be eligible, contractors must maintain ISO 9001:2015 certification and meet CMMC Level 2 security requirements. The solicitation was posted on October 16, 2026, with a response deadline of October 23, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of PIN-RIVET (NSN 5320-00-929-6443)This subcontract involves the procurement of 11,000 units of PIN-RIVET hardware, identified by NSN 5320-00-929-6443, to support prime contractors delivering DLA supply contracts for Air Logistics Centers. The selected provider is responsible for manufacturing or sourcing hardware that strictly adheres to the specified national stock number requirements. All deliverables must be packaged according to ASTM D3951 and marked in compliance with MIL-STD-129 and RP001 standards. Additionally, the contract requires DLA J34 export control approval. This effort is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Division.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services for Defense HardwareThis subcontract involves providing specialized packaging and marking services for defense hardware supporting the DLA Weapons Support ASC. The scope of work requires the packaging of 37,000 pins in accordance with MIL-STD-2073-1E and the marking of items per MIL-STD-129 and MIL-STD-130, which includes the application of Unique Identification. The contractor must utilize UID laser etching equipment and MIL-SPEC materials to ensure all hardware is properly prepared and palletized per RP001 standards for final delivery to DLA Distribution Anniston. Managed under NAICS code 333613 for the Department of Defense, the project demands the delivery of fully packaged and palletized hardware ready for immediate shipment. Interested parties should note the tight response window following the October 16, 2026, posting date. The contract ensures that all prime contractor requirements for the Army and Air Force divisions are met through strict adherence to military specifications.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Precision Machining and Fabrication of Quick Release PinsThis subcontract involves the precision machining and fabrication of 37,000 Quick Release Pins for prime contractors supporting the DLA Weapons Support ASC. The manufacturer must produce the units in strict accordance with TDP Rev B Gen 3 and Drawing NR 19207 10931133, utilizing precision CNC machining and calibrated measuring and test equipment as mandated by requirement RT001 for Critical Application Items. To ensure compliance with security and export regulations, the contractor is required to maintain CMMC Level 2 and US/Canada JCP certification for handling export-controlled data. The final deliverable consists of 37,000 finished pins that meet all specified technical data package requirements for the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supplier of Hydraulic Selector Sets (NSN 1650-00-604-4752)This subcontract involves the procurement and delivery of 34 hydraulic selector sets, part number 214156 and NSN 1650-00-604-4752, to support prime contractors on DLA aviation projects. The Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div, requires the supplier to perform rigorous quality assurance inspections to ensure part number accuracy and the total absence of corrosion. The selected supplier must adhere to ISO 9001:2015 standards and maintain strict supply chain traceability under C03 requirements. The final deliverable consists of 34 inspected and certified selector sets, with the solicitation process concluding on October 27, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supply of Cell Assembly, Optical Instrument (NSN 5855-01-442-6413)This subcontract involves the procurement of 860 units of Cell Assembly, Optical Instrument (NSN 5855-01-442-6413), specifically Elbit Systems of America part number 268788. These components are intended for prime contractors supporting DLA Weapons Support ASC contracts under the Department of Defense. All deliveries must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards to ensure military compliance. To be eligible, suppliers must provide authorized dealer certification from the approved source of supply and maintain ISO 9001:2015 certification. Additionally, a CMMC Level 2 self-assessment is required. The solicitation was posted on October 16, 2026, with a response deadline of November 16, 2026, falling under NAICS code 334511.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Supply of High-Strength Blind Rivets (NAS/Huck Standard)This subcontract involves the supply of 1,791 high-strength blind rivets, identified by NSN 5320-00-150-4092, for prime contractors working on DLA Weapons Support ASC projects. The required components must be commercial off-the-shelf items meeting either NAS80205 P/N NAS1919B04-02 or Huck International P/N MLSPB04-02 standards. Due to the critical nature of the application, the provider must maintain rigorous quality control systems to ensure part integrity. The contract specifies strict logistics and handling requirements, including packaging and labeling according to MIL-STD-129 and palletization following RP001 and ASTM D3951 guidelines. All units are to be delivered to Depot Hill, Utah. This procurement is managed by the Department of Defense under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Aerospace-Grade Fastener StockThis subcontract involves the supply of certified raw metal stock or pre-formed blanks used by prime contractors to fulfill DLA supply contracts for the US Air Force. The scope focuses on providing aerospace-grade alloys that strictly adhere to NSN 5320-01-326-9549 specifications, ensuring all materials are delivered directly to the manufacturer. To maintain rigorous quality and security standards, the provider must furnish full material certifications, mill test reports, and comprehensive documentation. These requirements are essential for ensuring supply chain traceability and enforcing strict prohibitions against counterfeit materials. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

in about 3 hours

Precision Manufacturing of Pin-Rivets (NSN 5320-01-326-9549)This subcontract involves the precision manufacturing of 257 finished pin-rivets under NSN 5320-01-326-9549 to support prime contractors for the US Air Force Cold Start Project. Managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, the work requires strict adherence to configuration control, counterfeit prevention protocols, and full supply chain traceability. The manufacturer must perform precision machining and forming, ensuring all items are inspected and packaged according to ASTM D3951 and MIL-STD-129, with palletization meeting RP001 standards. Additionally, the contractor is required to maintain a positive assessment within the Supplier Performance Risk System to ensure compliance with Department of Defense quality and reliability requirements.

Aircraft Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 3 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS