Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Military Specification Packaging Services

Active

Federal

Response Deadline11/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires specialized cleaning, preservation, and packaging services for precision bearings. The selected contractor will support prime contractors by executing strict military standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling, and MIL-DTL-197M for preservation. Technical requirements include adherence to packaging data QUP:001, preservation method ZZ, and cleaning/drying method Z to ensure bearings are shipment-ready. The project is designated as a Total Small Business Set-Aside under NAICS code 488510. Interested parties must submit their responses by November 13, 2026. The contract focuses on the delivery of precision-handled components that meet rigorous defense specifications for long-term preservation and transport.

General Info

DoD small business subcontract for precision bearing cleaning, preservation, and packaging services.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

488510 - Freight Transportation Arrangement

Place of Performance

USA

Set-Aside

SBA

Documents

This scope was carved out of SPE4A6-27-R-X120.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BEARING, BALL, ROD END

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 05:00:00 PM UTCin 16 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized cleaning, preservation, and packaging of precision bearings for prime contractors on DLA Weapons Support ASC projects. Executes packaging per MIL-STD-2073-1E, labeling per MIL-STD-129, and preservation per MIL-DTL-197M using specified packaging data QUP:001, PRES MTHD:ZZ, and CLNG/DRY:Z. Delivers bearings packaged and labeled for shipment.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services involves providing specialized military-grade packaging and marking for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work requires packaging units according to MIL-STD-2073 standards using moisture barriers and MIL-SPEC crates, while ensuring all shipping labels are applied in compliance with MIL-STD-129. The contractor is responsible for the delivery of properly packaged and marked filter units to the consignee via FOB Destination delivery to DLA Distribution in Norfolk, Virginia. This opportunity falls under NAICS code 488510 and is associated with the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Crating ServicesThis subcontract for MIL-SPEC Packaging and Crating Services, issued by the Department of Defense under SPRMM1 DLA Mechanicsburg, requires the provision of professional military-grade packaging and labeling for prime contractors. The scope of work involves packaging units according to MIL-STD-2073 and applying markings per ASTM D3951-18 to ensure all items are shipment-ready for transport to the DLA Distribution DDSP New Cumberland Facility. The contractor must utilize MIL-SPEC crates and approved cushioning materials to deliver fully prepared units. This opportunity falls under NAICS code 488510, with a response deadline set for November 19, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on Navsup Weapon Systems Support Mech projects for the Department of the Navy. The scope of work involves providing military-grade packaging, marking, and transportation for sensitive components. Specifically, the contractor must adhere to MIL-STD-2073-1 for OCONUS shipments and ASTM D3951-18 for CONUS shipments, while ensuring all marking and labeling comply with MIL-STD-129 and DLR requirements. The contractor is responsible for managing F.O.B. Destination transport to ensure hardware is delivered properly packaged and labeled to its final destination. Performance for this contract takes place in Mechanicsburg, Pennsylvania, under NAICS code 488510. The response deadline for this opportunity is November 27, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on DLA Mechanicsburg projects for the Department of the Navy. The scope of work involves providing specialized packaging and packing services for electronic components, ensuring strict adherence to MIL-STD-2073 and ASTM D3951-18 standards. To maintain component integrity, the provider must utilize anti-static, moisture-barrier, or shock-absorbent materials to deliver shipment-ready and properly labeled products. The performance of these services takes place in Mechanicsburg, Pennsylvania, with final delivery of the packaged components handled via F.O.B. Origin to Manassas, Virginia. This opportunity falls under NAICS code 488510 and was posted on October 28, 2026, with a response deadline of November 27, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

about 13 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging for prime contractors on Department of Defense projects. The scope of work requires the execution of Packing Level A and Level B in accordance with MIL-STD-2073-1, as well as the application of MIL-STD-129 labels including PIID, CLIN, and SubCLIN. To ensure compliance, the provider must use certified wood or long-life reusable containers per MIL-STD-2073-1 Appendix C to deliver shipping containers ready for government acceptance. The project is associated with the Department of the Navy and the Pa DLA Aviation At Philadelphia, with performance taking place in Philadelphia, Pennsylvania. Interested parties should note the response deadline of November 13, 2026. The contract falls under NAICS code 488510 and is managed through the Navy's business operations portal.

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

MIL-STD Packaging and Marking ServicesThis subcontract opportunity with the Department of the Navy's Navsup Weapon Systems Support Mech involves providing specialized packaging, marking, and crating services for RF amplifiers. The selected contractor must ensure all deliverables are ready for DLA Distribution centers, utilizing anti-static bags and moisture barriers to maintain strict shelf-life requirements. All work must be performed in accordance with MIL-STD-2073 for packaging and MIL-STD-129 R for markings. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 488510. Prospective bidders must provide demonstrated certification in both MIL-STD-129 and MIL-STD-2073 to be eligible. The solicitation was posted on October 28, 2026, with a response deadline of November 27, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in about 1 month

MIL-STD-2073 Compliant Packaging ServicesThis subcontract for MIL-STD-2073 Compliant Packaging Services supports the Department of the Navy, specifically Pa DLA Aviation At Philadelphia. The scope of work involves providing specialized packaging and marking for critical aviation components, including cylinder assemblies, intended for delivery to NAVSUP/NAVAIR. All services must be performed in strict accordance with MIL-STD-2073 and utilize MIL-SPEC materials, such as specialized cushioning and corrosion inhibitors, to ensure items are safely marked, labeled, and prepared for transport. The project is categorized under NAICS code 488510 and will be performed in Philadelphia, Pennsylvania. Interested parties should note the posted date of October 28, 2026, with a response deadline of November 10, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

Specialized Waterproof/Opaque Packaging ServicesThis subcontract opportunity is for specialized waterproof and opaque packaging services supporting the DLA Weapons Support Strategic Acquisition Program Directorate. The selected provider will perform sealing and packaging for prime contractors, specifically utilizing medium-duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, Type II, Class C, Style 1. All deliverables, specifically gaskets, must be sealed and marked according to MIL-STD-129 and packaged per MIL-STD-2073-1E standards. The project is designated as a Total Small Business Set-Aside under NAICS code 488510. Interested parties must submit their responses by November 12, 2026. This effort is managed under the Department of Defense to ensure that critical components meet strict military specifications for protection and identification.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 24 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis HUBZone set-aside subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the packaging of small hardware components in strict accordance with MIL-STD-2073-1E and RP001 standards, ensuring all items are prepared for First Destination Transportation shipping. The contractor is responsible for applying shipping labels per MIL-STD-129 and utilizing military-specification materials to guarantee hardware survival during transit. The final deliverable consists of packaged and marked hardware ready for FOB Origin shipment. Interested parties must respond by November 12, 2026, under NAICS code 488510.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Defense-Compliant Packaging and Labeling ServicesThis subcontract for Defense-Compliant Packaging and Labeling Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing specialized packaging, marking, and labeling of hardware to ensure all shipments are ready for FOB Origin transport. All activities must strictly adhere to RP001 and ASTM D3951 packaging standards, with markings applied according to MIL-STD-129 using approved MIL-SPEC materials and compliant labeling systems. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed at Tinker AFB. Interested parties should note the response deadline of November 4, 2026, for this opportunity categorized under NAICS code 488510.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves supplying packaging materials and performing final marking for components to ensure they are fully prepared for shipment to Tinker AFB. All work must be executed in strict accordance with MIL-STD-129, MIL-STD-130N, and DLA requirement RP001, with additional compliance required for hazardous materials under TQ requirement IP025 when applicable. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the contract falls under NAICS code 488510. The place of performance is located at Tinker AFB, zip code 73145-8000. Interested parties should note the response deadline of November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services involves providing specialized military-grade packaging, marking, and shipping support for prime contractors fulfilling DLA supply contracts. The scope of work requires strict adherence to Department of Defense standards, specifically executing palletization and marking in accordance with ASTM D3951, MIL-STD-129, and RP001 requirements using compliant materials. The services are performed for the DLA Weapons Support Maritime Supply Chain under the Department of Defense. All properly processed shipments are delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The opportunity is categorized under NAICS code 488510, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Fastener-Grade Steel/AlloyThis HUBZone set-aside subcontract involves the supply of fastener-grade steel or alloy raw metal stock, provided as wire or bar, for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the metallurgical specifications of NSN 5310-01-137-6955 and be sourced domestically in compliance with the Buy American Act. The selected provider is responsible for delivering the raw metal stock directly to the manufacturer and providing Material Test Reports to verify that all technical standards have been met. This opportunity falls under NAICS code 331110 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 24 hours ago

DEADLINE

Manufacturing of Plain Extended Washer Hexagon NutsThis HUBZone set-aside subcontract involves the manufacture and supply of 2,950 plain extended washer hexagon nuts for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the nuts according to NSN 5310-01-137-6955 and the DLA Master List of Technical and Quality Requirements RA001. Strict adherence to quality and regulatory standards is required, including quality control sampling per MIL-STD-1916 or ASQ H1331 and marking per MIL-STD-129. Additionally, all materials used in production must be compliant with the Buy American Act. The response deadline for this opportunity is November 12, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 24 hours ago

DEADLINE

Manufacturer of Threaded Pin-Rivets (NSN 5320-01-451-8479)This subcontract involves the manufacture and delivery of 187 threaded pin-rivets meeting NSN 5320-01-451-8479 specifications for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work is performed at Tinker AFB and strictly prohibits the use of additive manufacturing. The contractor must adhere to rigorous regulatory and quality standards, including the Buy American Act, the Berry Amendment, and the DLA Master List of Technical and Quality Requirements. Additionally, strict security and trade compliance are required, specifically CMMC Level 2, DFARS 252.204-7012, ITAR, and EAR standards.

POSTED

about 24 hours ago

DEADLINE

Supply of Keyway Washers (NSN 5310001162378)This subcontract involves the procurement of seven aerospace-grade keyway washers, specifically Boeing part number 114S1903-84 and NSN 5310001162378, to support prime contractors under DLA Weapons Support supply contracts. The selected supplier is responsible for sourcing or manufacturing the components in strict accordance with DFARS 252.223-7008 and DFARS 252.225-7001 regulations, with all packaging and marking requirements adhering to MIL-STD-129. The contract is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division under NAICS code 336413. Delivery of the units is designated as FOB Origin, with the place of performance located in New Cumberland, Pennsylvania. The solicitation period opens on October 27, 2026, with a response deadline of November 4, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

Supplier of Retaining Rings (NSN 5325-01-321-3445)This subcontract involves the manufacture or procurement of 112 retaining rings under NSN 5325-01-321-3445 to support prime contractors for the DLA Weapons Support ASC. The selected supplier is responsible for delivering the units to DLA Distribution DDSP in New Cumberland, Pennsylvania, ensuring all items are packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. Compliance with the Buy American Act and the Berry Amendment is mandatory for all materials used. Additionally, the contractor must maintain cybersecurity standards in accordance with NIST SP 800-171. The opportunity falls under NAICS code 332510 and is managed by the Department of Defense.

Hardware Manufacturing

POSTED

about 24 hours ago

DEADLINE

NADCAP Accredited Special Process ServicesThis subcontract involves the provision of NADCAP accredited special process services for the DLA Weapons Support ASC Commodities Division, with performance taking place at Tinker AFB. The scope of work requires the execution of specialized aerospace processes, specifically heat treating, chemical processing, and Non-Destructive Testing, in strict accordance with Drawing 20145214 and requirement RQ040. To be eligible, the contractor must maintain NADCAP accreditation for all performed processes and hold JCP certification to ensure authorized access to necessary technical data. The final deliverables for this engagement include the processed aerospace components along with the corresponding certification reports.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 24 hours ago

DEADLINE

Precision Machining and Fabrication of Aircraft Structural SupportsThis subcontract involves the precision machining and fabrication of six aircraft structural component supports for the DLA Weapons Support ASC Commodities Division, with performance taking place at Tinker AFB. The contractor is responsible for manufacturing components to strict dimensional tolerances in accordance with Drawing 43999 L2102067 and ASME Y14.31 standards, while implementing zero-based sampling plans as mandated by MIL-STD-1916. To qualify for the contract and gain necessary access to ITAR data, the provider must maintain ISO 9001:2015, CMMC Level 2, and JCP certifications. The project falls under NAICS code 336413 and requires adherence to rigorous Department of Defense quality and security specifications.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

Defense-Compliant Packaging and PalletizationThis subcontract involves providing specialized packaging and palletization services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging of 64 bushing units using MIL-SPEC materials and equipment, ensuring strict adherence to ASTM D3951, MIL-STD-129, and RP001 palletization standards, as well as the DLA Master List of Technical and Quality Requirements. The completed units are to be marked and delivered to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. This requirement falls under NAICS code 493111 and is managed by the Department of Defense.

General Warehousing and Storage

POSTED

about 24 hours ago

DEADLINE

Manufacture of Sleeve Bushings (NAS537B5P024)This subcontract involves the manufacture of 64 precision sleeve bushings, part number NAS537B5P024, for the DLA Weapons Support ASC Commodities Division. The project requires the use of traditional machining processes, as additive manufacturing is strictly prohibited. All materials used in production must adhere to the Buy American Act and the Berry Amendment to ensure domestic compliance. The selected contractor must hold ISO 9001:2015 and SAE AS9003 certifications to ensure quality standards are met. The final deliverable consists of 64 finished and inspected units to be performed at Tinker AFB. The response deadline for this requirement is November 4, 2026.

POSTED

about 24 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

MIL-SPEC Packaging and Freight Services

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Logistics Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization Services

DLA DIST SAN JOAQUIN

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Freight Services

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 24 hours ago

DEADLINE

Military-Spec Packaging and Marking

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 24 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)

Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

Defense-Compliant Packaging and Palletization Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Military-Grade Packaging and Shipping Services

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 24 hours ago

DEADLINE

Defense-Compliant Packaging and Marking for Fasteners

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization Services

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 24 hours ago

DEADLINE

Military Grade Packaging and International Freight Forwarder

Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Delivery Services

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS