Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Mini Electric Forklift Supplier

Open

International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract agreement establishes the supply of mini electric forklifts for prime contractors working on UNOPS projects at the Queen Elizabeth Hospital in Barbados. The required equipment must feature electric-drive systems and electric hydraulic lift mechanisms, with a minimum rated capacity of 1,000 kg. To ensure operational efficiency within the facility, the forklifts must maintain a maximum width of 1,100 mm and a turning radius of 1,800 mm or less. All supplied machinery must adhere to strict international quality and safety benchmarks, specifically complying with ISO 3691, ISO 5053, CE Certification, or IEC standards. The contract focuses on the procurement and delivery of these specialized units to support infrastructure or operational needs at the designated medical site.

General Info

Supply of electric mini forklifts for UNOPS projects at Queen Elizabeth Hospital, Barbados.

Agency

NAICS

333316 - Photographic and Photocopying Equipment Manufacturing

Place of Performance

BRB

Set-Aside

NONE

Documents

This scope was carved out of ITB/2026/65094.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Procurement of waste compactors and forklifts for the Queen Elizabeth Hospital in Barbados This tender has been posted through the UNOPS eSourcing system. / Cet avis a été publié au moyen du système eSourcing de l'UNOPS. / Esta licitación ha sido publicad

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyUNOPS

ContactsNo contacts available

OfficeN/A

Organization / AgencyUNOPS

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies mini electric forklifts for prime contractors on UNOPS projects at the Queen Elizabeth Hospital in Barbados. Provides electric-drive forklifts with electric hydraulic lift mechanisms, rated capacity of at least 1,000 kg, turning radius of 1,800 mm or less, and maximum width of 1,100 mm. Must comply with ISO 3691, ISO 5053, CE Certification, or IEC standards. Delivers mini electric forklifts.

Similar Contracts

Same NAICS industry code

Manufacture and Supply of Removal Tool Set, AI

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

Adjustable Snap Gage SupplierThis subcontract involves the supply of six plain adjustable snap gages for prime contractors working on DLA Troop Support projects. The supplier is responsible for manufacturing or sourcing gages that strictly match NSN 5220-01-429-2362. All deliverables must adhere to specific government standards, including packaging requirements per RP001 and marking specifications according to MIL-STD-129. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The solicitation was posted on November 11, 2026, with a response deadline of November 23, 2026. The contract falls under NAICS code 333316.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Fifth Wheel Positioning Plate SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the manufacture or sourcing of a Fifth Wheel Positioning Plate, NSN 2510-01-626-0316. The component must be produced to meet strict technical specifications for heavy-duty vehicle suspension systems. The scope of work includes the delivery of one completed positioning plate to Fort Bliss, Texas, utilizing traceable shipping methods. Compliance with specific military and industry standards is mandatory, with packaging required to meet ASTM D3951 and marking requirements adhering to MIL-STD-129. The opportunity falls under NAICS code 333316, with a response deadline set for November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Fluid Filter Element Manufacturing and SupplyThis subcontract involves the manufacture and supply of 80 fluid filter elements for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The contractor is responsible for producing elements that strictly adhere to the DLA Master List of Technical and Quality Requirements and specific technical specifications for NSN 015371458. All deliverables must be packaged according to MIL-STD-2073-1E and RP001, with shipment markings compliant with MIL-STD-129. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 333316. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Specialized Tooling and Consumables SupplyThis subcontract agreement involves the supply of specialized tooling and consumables to support prime contractors working on research projects for the National Research Council of Canada. The scope of work focuses on the delivery of high-precision industrial saw consumables, specifically variable speed cutting wheels, diamond-tipped blades, and abrasive materials designed for use with ceramics and carbon fiber. The opportunity is managed under the Government of Canada and is categorized under NAICS code 333316. Performance of the contract will take place within Canada, with a response deadline set for November 20, 2026.

National Research Council of Canada

POSTED

DEADLINE

LEASE OF FOUR MULTI-FUNCTIONAL DEVICES FOR SOUTHWESTERN POWER ADMINISTRATIONThe Southwestern Power Administration, an agency under the Department of Energy, is forecasting a contract for the lease of four multi-functional devices to be utilized in Oklahoma. This procurement falls under NAICS code 333316 and is currently listed as a forecast with a posted date of November 1, 2026. Xerox Corporation is identified as the incumbent contractor for these services. Interested parties may coordinate with Brooke Butcher, the Small Business Program Manager, regarding this opportunity.

Southwestern Power Administration

POSTED

DEADLINE

CANON Call Order - Leased National MFDs at Regions 5 and National Capital RegionThe Federal Acquisition Service, under the General Services Administration, has issued a forecast for a Canon call order regarding the leasing of national multi-function devices. This procurement focuses on providing equipment for Region 5 and the National Capital Region, with the primary place of performance located in Washington. The requirement is categorized under NAICS code 333316. Interested parties may coordinate with Jeaneen Monroe as the primary point of contact or Alex Stutzman, the Small Business Specialist, for further details regarding this upcoming acquisition.

Federal Acquisition Service

POSTED

DEADLINE

FY26 Leased National MFD BPA - XEROXThe FY26 Leased National MFD BPA is a forecast procurement action managed by the General Services Administration under the Federal Acquisition Service. This requirement focuses on the leasing of national multi-function devices and is categorized under NAICS code 333316. The forecast was posted on October 30, 2026, and identifies Xerox as the associated entity for this blanket purchase agreement. Administrative inquiries regarding this opportunity should be directed to Jeaneen Monroe, the primary point of contact. For matters specifically concerning small business opportunities, Alex Stutzman serves as the designated Small Business Specialist. Further details and updates can be accessed through the Acquisition Gateway portal.

Federal Acquisition Service

POSTED

DEADLINE

FY26 Leased National MFD BPA - CANONThe FY26 Leased National MFD BPA - CANON is a forecast procurement action managed by the General Services Administration under the Federal Acquisition Service. This requirement falls under NAICS code 333316 and is intended to establish a Blanket Purchase Agreement for leased multi-function devices. Interested parties may direct inquiries to the primary point of contact, Jeaneen Monroe, or consult with Small Business Specialist Alex Stutzman for further guidance. Additional details regarding this opportunity can be accessed through the Acquisition Gateway.

Federal Acquisition Service

POSTED

DEADLINE

Region 5 MFDs Printer Lease & Full Maintenance ServiceThe Federal Acquisition Service, under the General Services Administration, is forecasting a contract for the lease and full maintenance service of multi-function devices for Region 5. This procurement falls under NAICS code 333316 and is intended to ensure the operational efficiency of printing and imaging equipment. The performance of this contract is designated for Washington, with the forecast posted on October 30, 2026. Interested parties may coordinate with Jeaneen Monroe as the primary point of contact or Alex Stutzman for small business inquiries.

Federal Acquisition Service

POSTED

DEADLINE

9 MFDs for Region 9The General Services Administration, specifically the Federal Acquisition Service, has issued a forecast for the procurement of nine multi-function devices for Region 9. This requirement falls under NAICS code 333316 and is designated for performance in Washington. Interested parties can seek further information by contacting Jeaneen Monroe or Small Business Specialist Alex Stutzman. The forecast was posted on October 30, 2026, and additional details may be accessed through the Acquisition Gateway.

Federal Acquisition Service

POSTED

DEADLINE

Order MFD for Guam LocationThe General Services Administration, specifically the Federal Acquisition Service, has issued a forecast for the procurement of Multi-Function Devices for a location in Guam. This requirement is categorized under NAICS code 333316 and is intended to provide necessary equipment to support operational needs. Interested parties may direct inquiries to the primary point of contact, Javier Perez-Martinez, or reach out to Small Business Specialist Alex Stutzman for further guidance. While the place of performance is listed as Washington, the primary objective of the order is to service the Guam location.

Federal Acquisition Service

POSTED

DEADLINE

More opportunities from UNOPS

Same awarding agency

DPU International Freight and Customs ClearanceThis subcontract involves providing international freight, customs brokerage, and unloading services for UNOPS solar energy projects located in Koboko, Uganda. The scope of work requires the management of sensitive electronics and LiFePO4 batteries, which are classified as Dangerous Goods. To ensure successful execution, the contractor is responsible for obtaining all necessary certificates of conformity, certificates of origin, and Ugandan import certifications to fulfill delivery under DPU 2020 terms. The service provider must hold valid IATA and IMDG certifications and possess the required Ugandan import licensing to operate. The contract mandates that all goods be delivered and unloaded at the specified destination in Uganda. This operation falls under NAICS code 488510, focusing on the specialized logistics and regulatory compliance necessary for transporting energy infrastructure components into the region.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Solar Installation Technical AssistanceThis subcontract involves providing technical advisory and oversight services for UNOPS solar energy projects located in Koboko, Uganda. The selected provider will be responsible for assisting end-users and installers to ensure all equipment is installed according to manufacturer specifications, while utilizing PV and battery testing tools to verify system commissioning and overall performance. Qualified candidates must hold professional engineering credentials or be certified solar technicians. Key deliverables for the contract include the provision of formal commissioning sign-offs and detailed oversight reports to ensure project quality and compliance.

Engineering Services

POSTED

about 20 hours ago

DEADLINE

DC Distribution Box and Switchgear SupplyThis subcontract involves the supply of IP65-rated DC distribution boxes for prime contractors working on UNOPS solar energy projects located in Koboko, Uganda. The scope of work requires the assembly of wall-mount enclosures equipped with 250A/pole DC busbars, 200A 2P DC MCCBs, 100A 2P DC main switches, and bipolar fused switches utilizing HRC DC fuses. All components must adhere to IEC 60947-2 and IEC 60947-3 standards. The contractor is responsible for providing fully assembled Battery DC Distribution Boxes, which must include all necessary internal wiring, DIN rails, and appropriate labeling. This technical procurement ensures that the switchgear and distribution systems meet specific industrial safety and performance requirements for solar energy infrastructure.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 20 hours ago

DEADLINE

Hybrid Inverter Charger SupplyThis subcontract involves the supply of integrated hybrid inverter chargers for prime contractors working on UNOPS solar energy projects located in Koboko, Uganda. The scope of work focuses on providing power conversion equipment designed to manage energy flow between PV arrays, facility loads, and LiFePO4 battery systems. All delivered hybrid inverter units must strictly adhere to the system standards specified in Section C of the contract. The project is categorized under NAICS code 335311 and is managed through the United Nations Office for Project Services to support sustainable energy infrastructure in Uganda.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 20 hours ago

DEADLINE

LiFePO4 Battery Storage SupplyThis subcontract involves the supply of Lithium Iron Phosphate battery systems for prime contractors working on UNOPS solar energy projects located in Koboko, Uganda. The required units must feature an energy capacity of at least 5.0kWh, a usable capacity of 4.0kWh at 80 percent depth of discharge, and a charge and discharge current of 50A or higher. Each system must include an integrated battery management system to provide essential thermal and short-circuit protection. To ensure safety and quality, the batteries must hold UN38.3, UN3480, and either IEC 62619, UL 1973, or UL 1642 certifications. All delivered battery units are required to come with a 5-year warranty. The project is categorized under NAICS code 335912 and is managed through UNOPS.

Primary Battery Manufacturing

POSTED

about 20 hours ago

DEADLINE

Solar PV Module and Roof Racking SupplyThis subcontract involves the supply of 550Wp monocrystalline PV modules and roof racking systems for prime contractors working on UNOPS solar energy projects in Koboko, Uganda. The required solar modules must meet specific technical standards, including a Vmpp of at least 33.5V, an Impp of at least 11A, and a minimum efficiency of 20 percent. Each unit must feature aluminum frames and be prewired with MC4/UV-rated 4mm² cables. To ensure quality and safety, all equipment must hold certifications for IEC 61215, IEC 61730-1/-2, IEC 62804, IEC 61701, and UL1703. The scope of work focuses on the delivery of these certified solar panels and the necessary racking hardware to support the installation of the energy systems.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 20 hours ago

DEADLINE

Electrical Installation and CommissioningThis subcontract involves the installation and commissioning of a 100 KVA transformer and its associated electrical infrastructure for UNOPS projects located in Aleppo, Syrian Arab Republic. The scope of work includes mounting the transformer onto its footing, completing all necessary wiring, and establishing connections to the utility grid. To ensure operational readiness, the contractor must perform comprehensive system testing and commissioning using specialized equipment and grounding systems. The project requires strict adherence to UNOPS Health, Safety, Social, and Environmental requirements and necessitates obtaining all necessary approvals from the local Electricity Utility. The final deliverable is a fully commissioned and operational 100 KVA transformer system that meets all technical specifications and safety standards.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 20 hours ago

DEADLINE

Transformer Pole Footing Concrete ContractorThis subcontract involves the provision of cast-in-place concrete work for transformer pole footings on UNOPS projects located in Aleppo, Syrian Arab Republic. The selected contractor is responsible for the excavation and preparation of the footing area, as well as the installation of plain blinding concrete using standard formwork to ensure a stable foundation. The contractor must strictly adhere to the UNOPS Minimum Health and Safety Requirements for Contractors throughout the duration of the project. The final deliverable consists of the completed concrete blinding and the fully installed footing for the transformer pole, executed in coordination with the prime contractors.

Poured Concrete Foundation and Structure Contractors

POSTED

about 20 hours ago

DEADLINE

100 KVA Transformer SupplierThis subcontract involves the manufacture and delivery of a 100 KVA transformer and associated permanent electrical equipment to support prime contractors on UNOPS projects located in Aleppo, Syrian Arab Republic. The selected supplier is responsible for providing the hardware along with all necessary manufacturer catalogues, technical drawings, explanatory literature, and comprehensive test documentation to ensure full compliance with IEC requirements. To qualify for this engagement, the manufacturer must operate under an official license or certification within its country of operation. The final deliverables include the physical 100 KVA transformer and all required technical certifications and manuals to ensure proper installation and operation.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 20 hours ago

DEADLINE

Office Stationery SupplyThis subcontract agreement with UNOPS involves the supply of office fasteners and stationery to support prime contractors. The scope of work specifically requires the provision of an initial stock and subsequent ad hoc deliveries of assorted color drawing pins measuring 20 x 12 x 2 cm, constructed from plastic and metal. The selected provider must satisfy all bidder eligibility conditions outlined in Section I of the Request for Quotation. All materials are to be delivered to the designated site located in Austria.

Automobile and Other Motor Vehicle Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Kitchen and Cleaning Consumables SupplyThis subcontract with UNOPS involves the provision of kitchen and cleaning consumables to support prime contractors. The scope of work requires the delivery of specific items, including double-sided cleaning sponges measuring 75 x 50 x 28 mm, reusable absorbent cotton fibre dishcloths, and 100% cotton tea towels measuring 45 x 65 cm. These materials are to be delivered to a designated site in Austria according to established monthly and quarterly schedules. To be eligible for this contract, bidders must satisfy the specific conditions outlined in Section I of the Request for Quotations. The agreement focuses on the consistent supply and timely delivery of these essential cleaning materials to ensure operational continuity for the prime contractors.

Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Specialized Equipment Transport

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS