Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Minor Repairs to Backflow Prevention Assemblies

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves performing minor repairs to backflow prevention assemblies specifically during their testing or inspection processes. The scope of work is limited to small-scale repairs that can be done without extensive procedures, explicitly excluding major undertakings such as excavation or prolonged system shutdowns. This ensures minimal disruption while maintaining the operational integrity of the assemblies. The contract is a subcontract under the NAICS code 238220, which pertains to plumbing, heating, and air-conditioning contractors. It is issued by the Department of the Interior, under the office identified as Pwr LAME(81000). Details such as solicitation number, set-aside status, and specific location information are not provided. The contract was posted on March 30, 2026, and includes a link for more information through the official government contract workspace.

General Info

Minor repairs to backflow prevention assemblies during inspection; no major excavation or shutdowns.

Agency

Department Of The Interior → Pwr LAME(81000)View Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

NV

Set-Aside

NONE

Documents

This scope was carved out of 140P8126Q0011.

The full solicitation package (9 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

H--Cross Connection Survey, Cross Connection Control

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMar 30

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Pwr LAME(81000)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → Pwr LAME(81000)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform minor repairs to backflow assemblies during testing or inspection, within cost limits and excluding major work such as excavation or extended shutdowns.

Similar Contracts

Same NAICS industry code

Galley Renovation at USCG Station Lake Tahoe

Solicitation # 30670PR260000032

Solicitation 30670PR260000032 is a firm-fixed-price request for proposal issued by the US Coast Guard Regional Support Team – Southwest for the renovation of a 210 square foot galley at Station Lake Tahoe in California. This project is a total set-aside for small businesses with an estimated magnitude between 25,000 and 100,000 dollars. The scope of work includes the demolition and removal of existing cabinetry, countertops, sinks, griddles, and freezer units, followed by the installation of new commercial-grade cabinetry, stainless-steel countertops, a sink and faucet assembly, a combination griddle/burner unit, and a commercial-grade freezer. The existing refrigerator must be preserved and integrated into the new layout. All plumbing, electrical, and gas work must be performed by licensed professionals in accordance with state and local codes. The contract requires performance to commence within 15 calendar days of award, with a mandatory completion period of 60 calendar days. Award will be based on the lowest priced technically acceptable offer, requiring a reasonable technical approach and complete pricing. Key safety and environmental requirements include compliance with OSHA Lead in Construction Standards due to lead-based paint in the southeast corner and adherence to EPA Section 608 regulations for refrigerant reclamation from the old freezer. Offerors must be registered in SAM.gov and provide a detailed pricing breakdown of materials, personnel, and equipment. Proposals must be submitted via email by September 18, 2026, and include a technical approach addressing all statement of work tasks.

Base ALAMEDA(00031)

POSTED

about 3 hours ago

DEADLINE

ICE 8A - Ft Benning Improvements

Solicitation # 70CMSW25R00000011

This firm-fixed-price task order, issued under an 8(a) Multiple Award Construction Contract (MACC) for the DHS Office of Firearms and Tactical Programs, provides design-build services for life, safety, and operational improvements at Fort Benning, Georgia. The project scope includes a variety of facility enhancements such as installing aluminum awnings, replacing turf at Fiske Range, demolishing and restoring Building 2294, improving gutters and drainage at Building 234, and performing commercial HVAC replacements. Additional work involves general improvements to Building 301 and the DAGr Team facility, including office refreshes, the installation of AV equipment and gear storage lockers, and the reconfiguration of restrooms to include walk-in showers. The estimated magnitude of the project is between 4.0 million and 4.5 million dollars, with a period of performance not to exceed 365 days from the date of award. Award will be based on the lowest total evaluated price, provided the offeror demonstrates a technical understanding of the requirements and possesses the necessary licensed professional resources. The contract is subject to the Davis-Bacon Act, requiring adherence to wage determination GA20260320, including specific federal paid sick leave and minimum wage mandates. Performance and payment bonds are required per FAR 52.228-15. Administrative oversight is managed by the Contracting Officer's Representative, Mr. Joseph Addison, and all payment requests must be submitted electronically via the Invoice Processing Platform with accompanying certified payroll.

Bristol Alliance of Companies

POSTED

about 11 hours ago

DEADLINE

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 872287

This firm-fixed-price task order, issued under an 8(a) MACC IDIQ, involves the replacement and upgrade of Rooftop HVAC Units (RTUs) for the Alpha, Bravo, Charlie, and Delta dorms, as well as a SCADA system upgrade at the Port Isabel Detention Center in Los Fresnos, Texas. The project objective is to replace corroded and obsolete equipment with high-quality, coastal weather-resistant, and durable systems that exceed commercial standards. The scope includes removing existing RTUs, replacing necessary piping, electrical, and ducting, and installing new SCADA software and two chemical feed pumps in compliance with Texas Commission of Environmental Quality standards. The estimated magnitude of the project is between 1.2 million and 1.5 million dollars, with a period of performance of 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. Key requirements include the submission of a Quality Control Plan, a safety plan, and the designation of a Project Manager with at least five years of relevant federal contracting experience. The contractor must also provide a one-year warranty for installation and craftsmanship and ensure all personnel pass required background checks for site access. Compliance with the Davis-Bacon Act and associated executive orders regarding wages and sick leave is mandatory. All payment requests must be submitted electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 11 hours ago

DEADLINE

Packaged HVAC Unit Replacement - Bldg 1091

Adams & Associates, Inc.

POSTED

about 11 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is soliciting bids for a fee-for-service subcontracting opportunity to provide smoke detector installation and fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work requires the replacement of 43 smoke detectors across specific dormitory rooms, including 12 detectors in rooms 11, 15, and 18, 12 detectors in room 19, and 19 detectors in rooms 20 and 21. The contractor must ensure all installed detectors communicate with the fire panel and that all work adheres to NFPA standards and local Authority Having Jurisdiction requirements. Bids must be submitted via email to Tom Williams by 3:00 PM PST on September 18, 2026. To be considered, applicants must provide a completed bid sheet, proof of insurance, and a supplier packet containing a W-9, self-certification form, and acceptance of terms and conditions. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and Veteran-Owned businesses, under NAICS code 238220. Award decisions will be based on the best value as determined by MTC. The contract mandates compliance with Service Contract Labor Standards and Wage Determination No. 2015-5595 Revision 28 for labor rates in Washoe and Storey counties. Additionally, subcontractors must provide a 12-digit Unique Entity ID and certify their debarment status under FAR 52.209-6 if the subcontract exceeds 30,000 dollars. Strict adherence to government and Department of Labor guidance regarding the protection of sensitive and proprietary information is required.

Sierra Nevada Job Corps Center

POSTED

about 11 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation (MTC) is seeking fixed-price lump sum bids for a subcontracting opportunity to replace a 20hp motor connected to the rooftop HVAC system at the Clearfield Job Corps Center in Clearfield, Utah. The scope of work includes providing all labor, supervision, materials, equipment, and permits necessary for the removal and replacement of the motor, ensuring the system is fully operational upon completion. Deliverables include the successful installation and the provision of startup, testing, and commissioning documentation. All work must comply with federal, state, and local codes, OSHA requirements, and site safety procedures. Bids are due by September 19, 2026, at 3:00 PM MST and must be submitted via email to Patricia Willover and Nelson Dar. To be considered, bidders must conduct a physical site visit, sign the attendance roster, and submit a bid bond guarantee. The submission package must include a signed MTC Bid for Lump Sum Contract form and a detailed cost breakout on company letterhead. Award will be based on overall best value. The project is a small business set-aside and requires contractors to provide a 12-digit Unique Entity ID and a 9-digit Tax ID. Compliance with Davis-Bacon prevailing wage rates for Davis County, Utah, is mandatory. Additionally, the successful contractor must provide performance and payment bonds from a surety company with at least an A- rating within five business days of an Intent to Award letter. Payment will be processed via pay applications using AIA G702 and G703 forms based on a previously submitted Schedule of Values.

Management & Training Corporation

POSTED

about 11 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation is seeking bids for a subcontracting opportunity to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. This fixed-price, single lump sum contract requires the contractor to provide all labor, materials, and equipment to execute a five-phase process including preparation, demolition, installation of an OEM-specified compressor, system testing and commissioning, and final closeout. The project must restore full cooling capacity and operational efficiency while adhering to EPA Section 608 regulations for refrigerant recovery. The work must be completed within thirty consecutive business days following the receipt of a written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedule. The estimated price range is between 0 and 25,000 dollars, though bids equal to or greater than 25,000 dollars require a 20 percent bid bond guarantee and subsequent performance and payment bonds from an A-rated surety company. Submission requirements include a bid sheet, proof of insurance, three comparable project references, and a completed supplier packet containing a W-9 and self-certification of business size under FAR 52.219-8. Contractors must comply with Davis-Bacon Act prevailing wage rates for Washoe County and adhere to FAR 52.204-10 reporting if the award reaches 40,000 dollars. Final payment is contingent upon a successful final inspection and the submission of a notice of final completion, certified payroll reports, and operation and maintenance manuals.

Sierra Nevada Job Corps Center

POSTED

about 11 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This project involves the removal and replacement of shower diverters in eight bathrooms across two dorm buildings in Indiana. The scope of work includes replacing existing Powers brand systems with Delta or comparable models featuring readily available parts, as well as repairing or replacing any piping in poor condition leading into the diverters. The solicitation is open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Proposals must be submitted via email to Tammy Swallows at Atterbury Job Corps by September 14, 2026, at 3:00 PM. A site visit was scheduled for September 1, 2026.

Adams & Associates

POSTED

about 11 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking subcontractors to replace a failing air-cooled chiller in Building 214/215 at the North Texas Job Corps Center in McKinney, Texas. The project requires the installation of a like-kind, similar model to the existing 246-ton Carrier unit, including demolition and disposal of the old equipment. The scope of work extends to building automation controls via the installation of a JACE 9000 central integration point with a graphical user interface, the installation of four 3-way control valves, and the replacement of three out of four air handler VFDs. Additionally, the contractor must clean and inspect four air handling units, including blower motors, wheels, coils, and screens. Bids must be submitted by September 18, 2026, and must remain valid for 90 days. Required submission documentation includes manufacturer equipment specifications, Form 1413 for Davis-Bacon Act certified payroll for work exceeding 2,000 dollars, and a Certificate of Liability Insurance naming Serrato Corporation as the holder. Insurance minimums include 1 million dollars for Commercial General Liability and Comprehensive Automobile Liability, and 500,000 dollars for Employers Liability. The contractor is responsible for performing startup and operational tests and providing all warranty information and final job documentation. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 11 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02 is a presolicitation for HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska, with an estimated construction magnitude between 250,000 and 500,000 dollars. The scope of work includes the replacement of the Fairbanks FSS chiller, four AC units, chilled-water piping, and all associated electrical systems. To maintain operations during construction, the contractor must provide temporary and redundant cooling and perform modifications to Panel P1 and various HVAC circuits. The project is scheduled for a proposed start date of April 15, 2027. Final deliverables include the completion of startup, testing, commissioning, and punch-list work, as well as providing FAA training and project closeout. This opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, VOSB, SDVOSB, and Alaskan small businesses, under NAICS code 238220. Interested firms should contact Masanori Akers, the Parsons Subcontract Administrator, for further information.

PTSI Managed Services Inc.

POSTED

about 11 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.

Adams and Associates, Inc.

POSTED

about 11 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

This project involves the replacement of a pad-mounted gas-fired packaged HVAC unit at the Glazing, Welding, and Heavy Mechanics Building (1091) in Indiana. The existing 10-ton Carrier unit, which utilizes R-22 refrigerant, will be replaced with a new 12.5 SEER packaged unit using non-R22 refrigerants such as R-410A or R-454B. The scope of work requires the reuse of existing ductwork, electrical disconnects, and thermostat wiring. Following installation, the old unit and any recovered refrigerant must be labeled and left at the maintenance building for parts and reuse. The solicitation is managed by Adams and Associates, Inc., with a response deadline of October 5, 2026. This opportunity is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned businesses. Interested parties should contact Tammy Swallows for further information regarding this NAICS 238220 project.

Adams & Associates, Inc.

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of The Interior → Pwr LAME(81000)

Same awarding agency

DEVA-Conduit and Lift Station Rehabilitation Stov

Solicitation # 140P8126Q0051

Solicitation 140P8126Q0051 is a firm-fixed-price, single-award heavy construction project issued by the Department of the Interior for the rehabilitation of water infrastructure within Death Valley National Park. The scope of work focuses on the Stovepipe Wells potable water production well, the replacement and flood-sealing of conduit runs, and critical repairs to the Coyote Loop and Furnace Creek Campground lift stations, including the replacement of grinder pumps, controls, and automatic transfer switches. The project requires comprehensive testing, commissioning, startup, and training, with all work adhering to the prevailing wage rates specified for Inyo, Kern, and Mono counties in California. This opportunity is designated as a total small business set-aside under NAICS code 237110. Interested quoters must submit their proposals by September 15, 2026, including a technical information form that details their business information, proposed teaming or subcontracting approach, and up to three relevant past performance references. Evaluation will be based on pricing, technical capabilities, and prior experience. The project is managed by the Office in Boulder City, Nevada, with primary point of contact Caroline Bachelier.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Supply of Stainless Steel Toilet Risers for Waterless Vault ToiletsThe contract calls for the manufacture and delivery of twenty stainless steel risers specifically designed for waterless vault toilets, adhering strictly to Dawson Co. Model FXR-S-CT-CT-WC-0021 or an approved equivalent. These components are critical structural elements that must meet precise material, dimensional, and durability standards to ensure safe and reliable performance in remote or environmentally sensitive settings. The work is classified under NAICS code 332913, indicating it falls within the Other Fabricated Metal Product Manufacturing sector, and is structured as a subcontract under the Department of the Interior’s Pwr LAME(81000) organization. The solicitation was posted on July 15, 2026, and while no set-aside designation or specific delivery location is provided, the materials are intended for use in installations requiring corrosion-resistant, low-maintenance hardware consistent with federal facility and sanitation standards. All delivered units must be fully compliant, undergo any required inspection, and be free from defects or deviations from the referenced specification.

Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 2 months ago

DEADLINE

Custom Velcro Patch and Name Plate AttachmentsThis contract involves the manufacture and configuration of custom Velcro-backed attachments designed specifically for badges, name plates, and police patches to be used on tactical vests. It is categorized under NAICS code 316998, indicating involvement in manufacturing specialized textile products. The contract is a subcontract issued by the Department of the Interior under the agency code Pwr LAME (81000), with the solicitation posted on June 15, 2026. The procurement focuses on ensuring that the attachments are compatible with tactical vests, providing secure and reliable fastening solutions for law enforcement or security personnel outfitting. While specific details such as place of performance, set-aside status, and points of contact are not provided, the contract clearly supports operational needs for durable and customizable identification solutions incorporated into tactical gear.

All Other Leather Good and Allied Product Manufacturing

POSTED

DEADLINE

Bulletproof Plates and Placards SupplyThis contract involves the exclusive supply of ballistic plates and placards from Angel Armor, LLC, which are not available through the General Services Administration (GSA). These components are intended for integration into body armor systems, highlighting their specialized nature and importance for protective equipment. The contract falls under the NAICS code 339113, indicating it relates to surgical appliance and supplies manufacturing, which aligns with the production of personal protective equipment. Administered by the Department of the Interior under the agency code Pwr LAME(81000), this subcontract was posted on June 15, 2026. Specific details regarding the place of performance, set-aside status, and points of contact are not provided. The procurement ensures a unique sourcing arrangement to meet the specialized requirements for ballistic protection gear, emphasizing a focused acquisition strategy to support security and defense needs.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Tactical Body Armor Vests SupplyThis contract involves the supply of external vest carriers (EVCs) that meet the specifications outlined in NPS RM-9 Chapter 29. It specifically includes the provision of Angel Armor Flex and Rise Patrol models, with the stipulation that these vests do not feature MOLLE attachments on the back. The procurement is categorized under NAICS code 339113, which relates to the manufacture of surgical and medical instruments and supplies, indicating specialized tactical body armor equipment. The contracting agency is the Department of the Interior, under the division labeled Pwr LAME (81000). The contract is a subcontract opportunity posted on June 15, 2026. There is no detailed information about the place of performance, point of contact, or a set-aside designation, suggesting an open procurement process. The contract supports the government’s need for advanced tactical protection equipment, designed to meet precise standards for external vest carriers used in various operational environments.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Specialized Vehicle Equipment SupplyThis contract involves the supply of specialized, ruggedized vehicle components tailored for law enforcement use, including emergency lighting systems, sirens, mobile data terminals (MDTs), cameras, and power systems designed for seamless integration into federal vehicle fleets. It is structured as a subcontract under the NAICS code 336320, which pertains to motor vehicle manufacturing, ensuring that the equipment meets stringent durability and warranty requirements necessary for federal law enforcement applications. The contract is managed by the Department of the Interior, specifically through the Pwr LAME(81000) agency. While detailed location information and points of contact are not specified, the procurement emphasizes the delivery of fully warrantied, mission-critical equipment that supports federal fleet vehicles' operational readiness and security. The equipment is expected to meet rigorous standards suitable for use in demanding law enforcement environments, highlighting the contract’s focus on reliability and specialized functionality.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

Law Enforcement Vehicle Downfit and RefurbishmentThe contract involves the removal of law enforcement-specific equipment from decommissioned vehicles, followed by both mechanical and cosmetic refurbishment. This work is intended to prepare the vehicles either for resale or for reassignment within the organization. The task requires expertise in handling specialized equipment removal while ensuring the structural and aesthetic quality of the vehicles is restored to a reliable, functional condition. Issued by the Department of the Interior under the Office of Power LAME (81000), this subcontract is categorized under NAICS code 811114, which pertains to automotive repair and maintenance. While specifics such as location and points of contact were not provided, the contract posting date is April 16, 2026, suggesting a forthcoming opportunity for qualified contractors specializing in vehicle refurbishment and customization, particularly with a focus on law enforcement fleet vehicles.

Specialized Automotive Repair

POSTED

DEADLINE

Automotive Mechanical & Preventive Maintenance ServicesThis contract involves providing routine mechanical servicing, diagnostics, and preventive maintenance specifically for law enforcement fleet vehicles. The goal is to ensure these vehicles remain operationally ready and safe for use at all times. The services cover a range of automotive mechanical tasks under the NAICS code 811114, which pertains to automotive maintenance and repair. Issued as a subcontract by the Department of the Interior through the Pwr LAME(81000) office, the contract was posted on April 16, 2026. While there are no specific set-aside provisions or detailed location information available, the emphasis is on maintaining fleet reliability and functionality for law enforcement operations. This work supports the agency’s mission by minimizing vehicle downtime and enhancing the safety of patrol and emergency response vehicles.

Specialized Automotive Repair

POSTED

DEADLINE

Law Enforcement Vehicle Upfitting (Electrical & Electronics Integration)This contract involves the installation of essential electrical and electronic systems in law enforcement vehicles, focusing on mission-critical components such as lighting, sirens, radios, body cameras, and mobile data terminals. It is a subcontract opportunity issued by the Department of the Interior, aimed at enhancing the operational capabilities of law enforcement fleets through advanced technology integration. The work falls under the NAICS code 336320, which pertains to motor vehicle manufacturing-related activities, reflecting the specialized nature of vehicle upfitting. While specific details such as location, set-aside status, and points of contact are not provided, the contract highlights a vital investment in safety and communication tools that support law enforcement agencies in performing their duties effectively. The solicitation was posted in mid-April 2026, indicating a forward-looking procurement effort in this area.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

Compliance Documentation & Reporting ServicesThe contract titled "Compliance Documentation & Reporting Services" involves compiling and submitting test results, repair logs, and survey data in the required Government formats. This includes digital data entry and comprehensive recordkeeping to ensure adherence to specified standards. The subcontract is issued by the Department of the Interior, specifically under the Pwr LAME(81000) agency. The work falls under the NAICS code 561499, which pertains to All Other Business Support Services. Although certain details such as solicitation number, specific location of performance, and point of contact are not provided, the primary focus is on maintaining accurate and compliant documentation to support government operational needs. This contract facilitates the effective management and reporting of critical data necessary for ongoing projects within the agency's oversight.

All Other Business Support Services

POSTED

DEADLINE

Cross Connection Survey & Control Plan DevelopmentThe contract involves performing a thorough cross-connection survey of an existing water system to identify any potential points where contamination could occur. Following the assessment, the contractor is tasked with developing a detailed mitigation and control plan aimed at preventing contamination, ensuring compliance with all relevant regulatory standards. This work is crucial for maintaining water safety and protecting public health. The contract is a subcontract opportunity issued by the Department of the Interior, specifically under the agency designation Pwr LAME (81000). It falls under the NAICS code 541620, which relates to environmental consulting services. Posted on March 30, 2026, the solicitation does not specify the location for performance or provide detailed contact information, and no set-aside provisions are indicated. The contract's scope emphasizes technical expertise in water system evaluation and regulatory compliance.

Environmental Consulting Services

POSTED

DEADLINE

Backflow Prevention Assembly Testing ServicesThis contract involves the annual testing and inspection of 67 backflow prevention assemblies located at Death Valley National Park. The purpose is to ensure these assemblies meet required cross-connection control standards to prevent contamination of the water supply. The testing must include detailed documentation of results, utilizing Government Form BF-1 for official record-keeping. The contract falls under NAICS code 541380 and is managed by the Department of the Interior, specifically associated with the agency code Pwr LAME(81000). It is classified as a subcontract opportunity posted on March 30, 2026. While specific location details within the park and contacts are not provided, the key deliverable is the thorough assessment and certification of backflow prevention devices in compliance with federal regulations, enhancing water safety and operational integrity at this national park site.

Testing Laboratories and Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS