Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

MIRA Camera

Active
MIRA_CAMERAFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The United States Air Force, through the Air Force Life Cycle Management Center at Wright-Patterson Air Force Base, is conducting market research to identify potential sources capable of providing a MIRA Camera for the Air Force Institute of Technology's Center for Technical Intelligence and Research. The required equipment is a short wave infrared synchronous event-based camera with a spectral range of 400-1700 nm and a full frame output rate exceeding 1 kHz. The scope of work includes the delivery of the instrument and the provision of necessary training. This is a sources sought notice for market research purposes only and does not constitute a request for proposals or a binding contract. Interested firms, including various small business designations under NAICS code 334516, must submit a capabilities package not exceeding five pages by October 14, 2026. Responses must demonstrate technical compliance, provide socio-economic status, and disclose ownership and manufacturing details. Future contract awards will require registration in the System for Award Management and may be subject to FAR 52.219-14 Limitations on Subcontracting and the Non-Manufacturer Rule. Final payment for the equipment will be issued on a net 30 basis via Wide Area Workflow upon delivery and verification that the system operates as designed, supported by a signed installation document.

General Info

US Air Force seeks sources for a MIRA short wave infrared camera.

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

Wright Patterson AFB, OH, USA

Set-Aside

NONE

Documents

2

SOW for MIRA Camera

PDF, High priority: read this firstsow
High

Sources Sought Instructions - MIRA Camera

PDF, Low prioritysources-sought
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8601 Aflcmc Pzio
Contacts2 people available
OfficeWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Office AddressWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Contacts

Full Description

Show more

Notice from the United States Air Force, Air Force Life Cycle Management Center (AFLCMC), Installation Contracting Division, Base Support Contracting Branch at Wright-Patterson Air Force Base (WPAFB), Ohio:



The AFLCMC Operational Contracting Branch, Wright-Patterson AFB, Ohio is seeking capabilities packages of potential sources including Small Businesses (SB). This sources sought synopsis is published for market research purposes only, to identify potential sources capable of delivering MIRA Camera with the capabilities described herein for the Air Force Institute of Technology located at Wright Patterson Air Force Base, Ohio (WPAFB).



The Government is seeking capabilities packages from all potential sources, including but not limited to: small business (SB), 8(a) participants, HUBZone Small Business, Economically Disadvantaged Women-Owned Small Business (EDWOSB), Women-Owned Small Business (WOSB), Small Disadvantaged Business (SDB) and Service-Disabled Veteran-Owned Small Business (SDVOSB). Firms that respond shall review the attached instructions and technical requirements and submit responses that:



  1. Specify that offered products meet the specifications provided below; and


  1. Provide detailed information to show clear technical compliance.


THIS SOURCES SOUGHT IS FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSALS/QUOTES.



All interested firms shall submit a response to the Primary Points of Contact, SrA Mark Hager at  mark.hager.3@us.af.mil and Ms. Linh Jameson at linh.jameson@us.af.mil, demonstrating their capability to provide MIRA camera. Responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. A solicitation for this requirement does not exist, therefore, do not request a copy of the solicitation. The decision to solicit for a contract will be solely within the Government's discretion.



The North American Industry Classification System (NAICS) code assigned to this acquisition is


334516 (Analytical Laboratory Instrument Manufacturing) with a small business-size standard of 1,000 employees. Firms responding should indicate socio-economic status (8(a) with Graduation Date, SDVOSB, EDWOSB, WOSB, small business, and/or HUBZone). Respondents are further requested to indicate their status as a foreign-owned/foreign-controlled firm and any contemplated use of foreign national employees on this effort. The Government reserves the right to consider a small business set-aside based upon responses hereto for any subsequent action. All prospective contractors must be registered in the System for Award Management (SAM) database to be awarded a Department of Defense (DoD) contract. A small business set-aside decision has not yet been made.



Respondents should note the potential application of Limitations on Subcontracting (FAR 52.219-14) and the Non-Manufacturer Rule (FAR 52.219-33) to a future acquisition that may result from this Sources Sought. Respondents should consider how the primary tasks identified in this notice will be broken out between prime contractor and subcontractors and address subcontracting in their response, if applicable/necessary.



Any information submitted by respondents to this Sources Sought is voluntary. This Sources Sought notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice. Respondents will not be individually notified of the results of any Government assessments. The Government's assessment of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small business or any particular small business program.



CAPABILITIES PACKAGE:



All interested firms shall submit a capabilities package to provide MIRA Camera that explicitly demonstrates their capability to provide the required service. The capabilities package should be brief and concise yet clearly demonstrate an ability to meet the stated requirements. However, the response must not exceed five (5) pages. Capabilities Packages submitted in response to this sources sought synopsis must be received at the following e-mail addresses NO LATER THAN 14 October 2026 AT 12:00 PM EASTERN  DAYLIGHT TIME. (7 DAYS)



All correspondence sent via email shall contain a subject line that reads: MIRA Camera. If this subject line is not included, the email may not get through email filters at WPAFB. Filters are designed to delete emails without a subject or with a suspicious subject or attachments. Attachments with files ending in .zip or .exe are not allowable and will be deleted. Ensure only .pdf, .doc, .docx, .xlsx or .xls documents are attached to your email. All other attachments may be deleted.



Responses shall be submitted via email to the following addresses: mark.hager.3@us.af.mil and linh.jameson@us.af.mil



Please direct all questions concerning this acquisition to SrA Mark Hager at  mark.hager.3@us.af.mil and include the necessary subject line indicated above.




Attachments:


  1. Instructions
  2. Statement of Work (SOW)

Similar Contracts

Same NAICS industry code

NAICS: 334516
New
Federal
Instron System Retrofit Upgrade
Solicitation # 80NSSC26945542Q
NASA Shared Services Center is seeking an Instron System Retrofit Upgrade Package for the NASA Glenn Research Center in Cleveland, Ohio. The objective is to modernize an existing Instron 5584 Electromechanical Universal Testing System by implementing 6800 Series upgrades, including updated control electronics and software, to enhance operator safety, ergonomics, and system longevity. The scope of work includes the installation and integration of Bluehill Universal Software on a NASA-supplied computer, an Instron Connect agreement, system warranty services, and onsite software training for fundamentals and test method development. The procurement is being conducted under FAR Part 12 for commercial items, with NAICS code 334516. NASA intends to award a sole source contract to Illinois Tool Works Inc., as they have been determined to be the sole provider of this specific retrofit package. Technical requirements include enhanced load cell force verification from 0-300 kN and crosshead speed and displacement verification performed in accordance with ASTM E2658 and ASTM E2309. The period of performance is eight weeks after receipt of order. Interested organizations must submit capability statements to the primary point of contact, Laura Quave, by October 9, 2026, at 4:00 p.m. CST for the purpose of determining if the procurement will be competed.
NASA Shared Services Center

POSTED

about 14 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334516
New
Federal
Linear X-Nanopositioners
Solicitation # 6-B187-Q-00463-00
Solicitation 6-B187-Q-00463-00 is a request for quotation issued by Argonne National Laboratory for the procurement of linear x-nanopositioners and associated control and accessory equipment. The required hardware includes nanopositioners with a 30 mm x 30 mm footprint, 6 mm travel range, 200 nm position resolution, and 2 µm repeatability at 10 mK, featuring integrated resistive encoders. The scope also encompasses AMC300 control equipment, including a rack, remote controller, and various cables, as well as a PEEK Nanopositioner Toolbox with accessories specified for vacuum and cryogenic conditions. Proposals must be submitted to Jazlyn Mangis by October 12, 2026. To be considered complete, offerors must provide a quotation supported by a published price list, a signed RFQ page, and completed ANL-70A Representations and Certifications. Key requirements include verification of the country of origin per FAR 52.225-I Buy American standards, confirmation of lead times, and acceptance of FOB Destination for domestic or DAP Destination for international shipping. All tariff charges must be integrated into the unit price, as separate line items are unallowable by the Department of Energy. The resulting order will be governed by the Argonne Terms and Conditions for Commercial Items (ANL-71COM), which include specific provisions for laboratory site access, safety, and the prevention of counterfeit parts.
Argonne National Labor - DOE Contractor

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334516
New
SLED
D27 - Moist Cabinet - RFQ 2142
Solicitation # SRC0000042350
The Ohio Department of Transportation is soliciting quotes for a high-capacity atmospheric moist cabinet for its Cement Lab, with an estimated value of 65,000 dollars. The equipment must be designed for the simultaneous dry and submerged curing of hydraulic cement briquets, concrete cubes, cylinders, and molds, strictly complying with ASTM C511 / ASTM C511-19 standards. Key technical requirements include a minimum of 60 square feet of usable shelf space, including 20 square feet of tray space, and a tightly regulated environment maintaining a dry-bulb temperature of 70 to 73 degrees Fahrenheit and relative humidity between 95 and 100 percent. The cabinet must feature a heavy-duty brass or structural steel frame, stainless steel interior and exterior, and be compatible with a single phase, 20 amp, 208 volt disconnect. Deliverables include removable stainless steel wire shelves, 4-inch deep submerged curing tanks, an integrated digital data logging system with USB/Ethernet export, and mandatory spare parts such as door gaskets and heater fuse links. The award will be based on the total cost of all items combined, and vendors must provide manufacturer documentation proving they are an authorized dealer or distributor. The total price must include freight delivered to 1600 W. Broad St., Columbus, OH 43223, and the State of Ohio is tax exempt. Successful vendors must be registered through the OhioPays Portal and comply with all state and federal nondiscrimination laws, including Title VI of the Civil Rights Act of 1964. Payment is issued via electronic funds transfer or other state-approved methods within 30 calendar days of receiving a proper invoice. The contract emphasizes compliance with safety, environmental, and data security standards, while encouraging the use of Ohio certified Minority Business Enterprise and EDGE vendors.
Construction Management

POSTED

1 day ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → FA8601 Aflcmc Pzio

Same awarding agency

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS