Miscellaneous PMO Gear

This is a combined synopsis/solicitation for commercial supplies prepared in accordance with the format in FAR Subparts 12.6, as supplemented with additional information included with or attached to this notice. The Regional Contracting Office-MCIPAC intends to solicit and award a Firm Fixed Price contract for this requirement. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-86 and Defense Federal Acquisition Regulations Supplement Publication Notice (DPN) 20151230. THIS NOTICE CONSTITUTES THE ONLY SOLICITATION. This procurement is a 100% small business set-aside. The NAICS code is 339999 and the size standard is 500 employees. Quotes from vendors not meeting this size standard will not be considered. Any award made under this solicitation will be made to a small business concern. The Government intends to issue a single award to the responsible quoter that meets following factors: Lowest Price Technically Acceptable. The quote shall contain all requested products as the contract award will be made in aggregate. Therefore, any quote received without all products priced will be considered non-responsive. The Government is soliciting quotes for the purchase of miscellaneous gear for PMO. *ONLY OPEN MARKET PRICING WILL BE CONSIDERED* This is a "Brand Name" or "Equal" procurement. The referenced brand name(s) is(are) not intended to be restrictive, but represent the minimum requirements of the Government. The salient physical, functional, or performance characteristics must be met in order for an "equal" item to be acceptable for award by the Government. It is the quoter's responsibility to furnish sufficient information to the Government in order to determine acceptability of the quoted "equal" item(s). Therefore, if "equal" item(s) is(are) quoted, the quoter shall submit all technical specifications for the Government to review in order to determine technical acceptability. Quoters are instructed to completely fill out the attached coversheet and return it along with your quote. Failure to provide the required coversheet may result in your quote being considered non-responsive by the Government. All quotes shall be submitted in English. All materials awarded under this contract are expected to be delivered 30 days after the award. Delivery shall be made to: Defense Logistics Agency, Defense Distribution Depot San Joaquin, Tracy Depot, Bldg.30 CCP, 25600 Chrisman Road, Tracy, CA 95376 Quoters shall state their proposed delivery schedule and F.O.B. terms. If proposing Freight Prepaid, an estimated freight cost shall be included. Please see the below for the requirement's details: CLIN 0001: WOMEN'S JACKET REFERENCED MFR: MARMOT REFERENCED PART#: JX324 OR EQUAL -Color: Black -Shall be waterproof and breathable -Shall have an attached adjustable hood which rolls into collar -Shall have chin guard -Shall have Adjustable cuffs -Shall have a full front zipper -Shall have elastic draw cord hem -Size Breakdown: Small(women)-Qty:003EA Medium(women)-Qty:003EA Qty: 006 EA CLIN 0002: MEN JACKET REFERENCED MFR: MARMOT REFERENCED PART#: JX319 OR EQUAL -Color: Black -Shall be waterproof and breathable -Shall have an attached adjustable hood which rolls into collar -Shall have chin guard -Shall have Adjustable cuffs -Shall have a full front zipper -Shall have elastic draw cord hem -Size Breakdown: Small(men) - Qty:005EA Medium(men)- Qty:015EA Large(men) - Qty:005EA Qty: 025 EA CLIN 0003AA: MEN TACTICAL BOOTS REFERENCED MFR: BATES REFERENCED PART#: 2262 OR EQUAL -Color: Black -Shall be leather and 1680 denier ballistic nylon uppers -Shall have fiberglass shank -Shall have removable shock absorbing insole -Shall have lining that is breathable and absorbs moisture -Shall have rubber outsole which are slip-resistant -Shall have non-metallic components -Shall have heel and forefoot shock absorption -Size Breakdown: 10M(men) - Qty:001EA 10.5M(men)- Qty:006EA 9.5M(men) - Qty:001EA 9M(men) - Qty:003EA 8.5M(men) - Qty:001EA 8M(men) - Qty:002EA Qty: 014 EA CLIN 0003AB: WOMEN TACTICAL BOOTS REFERENCED MFR: BATES REFERENCED PART#: 2762 OR EQUAL -Color: Black -Shall be leather and 1680 denier ballistic nylon uppers -Shall have fiberglass shank -Shall have removable shock absorbing insole -Shall have lining that is breathable and absorbs moisture -Shall have rubber outsole which are slip-resistant -Shall have non-metallic components -Shall have heel and forefoot shock absorption -Size Breakdown: 8M(women) - Qty:001EA 6.5M(women)- Qty:001EA Qty: 002 EA CLIN 0004: LED FLASHLIGHT REFERENCED MFR: STREAMLIGHT REFERENCED PART#: 75813 OR EQUAL -Color: Black -Shall be ANSI/NEMA FL1-2009 compliant -Shall use a combination of rechargeable battery and C4 LED -Shall be resistant to shock with a 50,000 hour lifetime -Shall be water-resistant -Shall have high, medium, low and strobe lighting modes -High beam shall have, at a minimum, 350 lumens, 24,000 candela peak beam intensity, 310 meter beam distance, runs 2 hours -Medium beam shall have, at a minimum, 175 lumens, 12,000 candela peak beam intensity, 219 meter beam distance, runs 3.75 hours -Low beam shall have, at a minimum, 85 lumens, 6,000 candela peak beam intensity, 155 meter beam distance, runs 7.25 hours -Strobe mode shall run for, at minimum, 5.5 hours -Shall have a non-slip rubber grip and unbreakable lens -Shall have an approximate length of 8.85inches Qty: 010 EA CLIN 0005: BELT KEEPERS REFERENCED MFR: DUTYPRO REFERENCED PART#: SHG077 OR EQUAL -Color: Black -Double Belt keepers -Shall be constructed from lightweight and easy-to-clean material -Shall fit any 2inch to 2-1?4inch W belt Qty: 010 PK (this Qty assumes a 4unit pack) CLIN 0006: HOLSTER REFERENCED MFR: BLACKHAWK REFERENCED PART#: TK097 OR EQUAL -Shall be compatible with a Beretta 92F -Shall have a mechanism to keep gun from being locked out of the holster -Shall be Level III; triple retention with a thumb activated pivot guard -Shall have the capability to lock in Level II retention as soon as the pistol is holstered -Shall have a passive retention detent adjustment screw -Shall have a jacket slot design which allow for clearance of outerwear -Shall be designed to protect both front and rear sights -Holster Hand Qty Breakdown: Left Hand-Qty: 005EA Right Hand-Qty: 025EA Qty: 030 EA CLIN 0007: EMBROIDERED CAP REFERENCED MFR: LAWPRO REFERENCED PART#: S6355 OR EQUAL -Color: Black Fabric with Gold letters -Shall have the word "SECURITY" embroidered in gold letters -Shall be made of nylon and acrylic twill knit -One size fits all/most Qty: 025 EA CLIN 0008: CAP REFERENCED MFR: LAWPRO REFERENCED PART#: 564-192 OR EQUAL -Color: Solid Black with Silver letters -Shall be made of polyester cotton twill -Shall have Silver reflective lettering, print stripe and back strap -One size fits all Qty: 025 EA CLIN 0009: BADGE HOLDER REFERENCED MFR: GALLS REFERENCED PART#: 71201 SHD OR EQUAL -Badge Style: Shield -Shall have the capability to be clipped on belt -Approximate shield dimensions: H:3.5in x W:2.5in -Shall have the capability to add a chain to wear around neck Qty: 010 EA CLIN 0010: SIMULATION TRAINING HANDGUN REFERENCED MFR: ASP REFERENCED PART#: 07301 OR EQUAL -Shall be made of rust-proof molded urethane -Shall be shaped, sized and detailed to duplicate a Beretta 9mm/.40 Qty: 005 EA CLIN 0011: TRAINING BATON REFERENCED MFR: ASP REFERENCED PART#: 07201 OR EQUAL -Shall have a cushioned striking surface -Shall have a foamed vinyl grip -Shall have a hard rubber retention grommet -Shall have a flexible inner frame rod -Shall have a washable cover -Shall have a replaceable foam core -Shall have a variable width belt carrier -Shall be a length of 21inches Qty: 10 EA CLIN 0012: TACTICAL MEN'S PANTS REFERENCED MFR: 5.11 TACTICAL REFERENCED PART#: 74003 055 OR EQUAL -Color: TDU Khaki -Shall be made of a material that repels moisture, stains and dirt -Shall have cargo pockets with internal magazine compartments -Shall have self-adjusting waistband -Shall have double reinforced seat -Shall have triple stitching -shall have the capability to facilitate attachment of pouches -Shall have blousing straps -Size Breakdown: Medium Regular(men) - Qty:025EA Large Regular(men)- Qty:005EA Qty: 030 EA CLIN 0013: TACTICAL WOMEN'S PANTS REFERENCED MFR: 5.11 TACTICAL REFERENCED PART#: 64358 055 OR EQUAL -Color: Khaki -Shall be made of a material that repels moisture, stains and dirt -Shall have cargo pockets with internal magazine compartments -Shall have self-adjusting waistband -Shall have double reinforced seat -Shall have triple stitching -shall have the capability to facilitate attachment of pouches -Shall have blousing straps -Size Breakdown: Small(women)(size:6)-Qty:005EA Medium(women)(size:8)- Qty:005EA Qty: 010 EA CLIN 0014: TACTICAL MEN'S POLOS - SHORT SLEEVES REFERENCED MFR: 5.11 TACTICAL REFERENCED PART#: 71049 019 OR EQUAL -Color: Black -Shall be made of Snag, rip and wrinkle resistant fabric -Shall have dual pen/pencil pockets at left sleeve -Shall have a traditional three button placket -Shall have buttons made of a material that won't burn, crack or melt -Shall have integrated mic loops at the shoulders and chest -Size Breakdown: Medium (men) - Qty:025EA Large (men)- Qty:005EA Qty: 030 EA CLIN 0015: TACTICAL WOMEN'S POLOS - SHORT SLEEVES REFERENCED MFR: 5.11 TACTICAL REFERENCED PART#: 61165 019 OR EQUAL -Color: Black -Shall be made of Snag, rip and wrinkle resistant fabric -Shall have dual pen/pencil pockets at left sleeve -Shall have a traditional three button placket -Shall have buttons made of a material that won't burn, crack or melt -Shall have integrated mic loops at the shoulders and chest -Size Breakdown: Small(women)-Qty:005EA Medium(women) -Qty:005EA Qty: 010 EA CLIN 0016: TACTICAL BELTS REFERENCED MFR: 5.11 TACTICAL REFERENCED PART#: 59551 019 OR EQUAL -Color: Black -Shall be fade resistant -Shall be reinforced with triple stitching -Shall have a width of 1.5in -Shall have a plastic Buckle -Size Breakdown: Small - Qty:005EA Medium - Qty:025EA Large - Qty:005EA Qty: 035 EA CLIN 0017: TACTICAL MEN'S POLOS - LONG SLEEVES REFERENCED MFR: 5.11 TACTICAL REFERENCED PART#: 42056 019 OR EQUAL -Color: Black -Permanent no curl collar -Shall be made of Fade, shrink and wrinkle resistant fabric -Shall have dual pen/pencil pockets at left sleeve -Size Breakdown: Medium (men) - Qty:025EA Large (men)- Qty:005EA Qty: 030 EA CLIN 0018: TACTICAL WOMEN'S SHIRT - LONG SLEEVES REFERENCED MFR: 5.11 TACTICAL REFERENCED PART#: 62372 019 OR EQUAL -Color: Black -Permanent no curl collar -Shall be made of Fade, shrink and wrinkle resistant fabric -Shall have dual pen/pencil pockets at left sleeve -Size Breakdown: Small(women)-Qty:005EA Medium(women) -Qty:005EA Qty: 010 EA CLIN 0019: TACTICAL MEN'S SHIRT - LONG SLEEVES REFERENCED MFR: 5.11 TACTICAL REFERENCED PART#: 72175 724 OR EQUAL -Color: Dark Navy -Fabric shall be liquid and soil resistance -Shall have patch pockets, pen/pencil pockets on left sleeve and 2 hidden secure chest pockets -Size Breakdown: Large (men) - Qty:025EA Extra Large (men)- Qty:005EA Qty: 030 EA CLIN 0020: TACTICAL WOMEN'S SHIRT - LONG SLEEVES REFERENCED MFR: 5.11 TACTICAL REFERENCED PART#: 62070 724 OR EQUAL -Color: Dark Navy -Fabric shall be liquid and soil resistance -Shall have patch pockets, pen/pencil pockets on left sleeve and 2 hidden secure chest pockets -Size Breakdown: Small (women) - Qty:005EA Medium (women)- Qty:005EA Qty: 010 EA CLIN 0021: CUFF CUTTER REFERENCED MFR: SAFARILAND REFERENCED PART#: 8500-0-2 OR EQUAL -Shall have the capability of cutting through disposable restraints -Shall be pocket size -Shall have non-slip rubber grip Qty: 002 EA The following provisions and clauses apply to this acquisition: FAR 52.204-2 Security Requirement (Aug 1996), FAR 52.204-7 System for Award Management, FAR 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2013) FAR 52.211-6 Brand Name or Equal (Aug 1999), FAR 52.211-17 Delivery of Excess Quantities (Sep 1989), FAR 52.212-1 Instructions to Offerors -- Commercial Items (Jul 2013), FAR 52.212-2 Evaluation-Commercial Items (Jan 1999), FAR 52.212-3 Offeror Representations and Certifications -- Commercial Items (Nov 2013), FAR 52.212-4 Contract Terms and Conditions -- Commercial Items (Sep 2013), FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items (May 2015), FAR 52.219-1 Small Business Program Representations (Oct 2014), FAR 52.219-28 Post-Award Small Business Program Representation (Jul 2013), FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Jan 2014), FAR 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011), FAR 52.233-3 Protest After Award (Aug 1996), FAR 52.225-13 Restrictions on Certain Foreign Purchases (Jun 2008), FAR 52.225-17 Evaluation of Foreign Currency Offers (Feb 2000): If the Government receives offers in more than one currency, the Government will evaluate offers by converting the foreign currency to United States currency using the Government Fiscal Year Budgetary Exchange Rate of - 121.83 to a dollar in effect as follows: (a) For acquisitions conducted using sealed bidding procedures, on the date of bid opening. (b) For acquisitions conducted using negotiation procedures-- (1) On the date specified for receipt of offers, if award is based on initial offers; otherwise (2) On the date specified for receipt of proposal revisions. FAR 52.232-1 Payments (Apr 1984), FAR 52.232-8 Discounts for Prompt Payment (Feb 2002), FAR 52.232-23 Assignment of Claims (Jan 1986) FAR 52.232-33 Payment by Electronic Funds Transfer -System for Award Management (Jul 2013), FAR 52.233-1 Disputes (Jul 2002), FAR 52.233-3 Protest After Award (Aug 1996), FAR 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004), FAR 52.243-1 Changes- Fixed Price (Aug 1987), FAR 52.247-34 F.O.B. Destination (Nov 1991), DFARS 252.203-7000: Requirements Relating to Compensation of Former DoD Officials (Sep 2011), DFARS 252.203-7002: Requirement to Inform Employees of Whistleblower Rights (Sep 2013), DFARS 252.203-7005 Representation Relating to Compensation of Former DoD Officials (Nov 2011), DFARS 252.204-7003: Control of Government Personnel Work Product (Apr 1992), DFARS 252.204-7004 Alternate A, System Award for Management (Feb 2014), DFARS 252.204-7005 Oral Attestation of Security Responsibilities (Nov 2001), DFARS 252.204-7008: Compliance with Safeguarding Covered Defense Information Controls (DEVIATION 2016-O0001)(OCT 2015). DFARS 252.204-7012 Safeguarding of Unclassified Controlled Technical Information (Nov 2013), DFARS 252.209-7991 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law - Fiscal Year 2016 Appropriations (Deviation 2016-O0002) (Oct 2015). DFARS 252.209-7999 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law. DFARS 252.211-7003 Item Unique Identification and Valuation (Dec 2013), DFARS 252.225-7043 Antiterrorism/Force Protection for Defense Contractors Outside the United States (Mar 2006), DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (Jun 2012), DFARS 252.232-7006 Wide Area Work Flow Payment Instructions (May 2013), DFARS 252.232-7008 Assignment of Claims (Overseas) (Jun 1997), DFARS 252.232-7010 Levies on Contract Payments (Dec 2006), DFARS 252.243-7001 Pricing of Contract Modifications (Dec 2012), DFARS 252.246-7006: Warranty Tracking of Serialized Items.(Jun 2011), Responsible quoters must be active in the System Award for Management in accordance with DFARS 252.204-7004 Alternate A (Feb 2014). Payment shall be made electronically by DFAS Columbus, utilizing Wide Area Work Flow for CONUS quotes, and by DFAS Yokota Japan for local quotes. Note: Full text of each FAR and DFARS Provision and Clause may be accessed electronically at http://farsite.hill.af.mil/. Quoters are instructed to completely fill out the attached coversheet and return it along with your quote. Quoters are instructed to include their DUNS number and CAGE code in their quote. Failure to provide the required information may result in your quote being considered non-responsive by the Government. Questions regarding this requirement must be submitted to contact@example.gov NLT 1800 EST on 4 Feb 2016. Quoters shall submit their response to this RFQ via email to contact@example.gov or via fax to 011-81-611-745-0959 NLT 1800 EST on 5 Feb 2016. Quoters are advised it is their responsibility to ensure all information pertaining to this RFQ is received in full by the Regional Contracting Office-MCIPAC NLT then the expiration of this RFQ. (End of RFQ)