Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Miter Gate Strut Arm Assembly Fabrication

Awarded

W912ES26CA020Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense, through the W07V Endist St Paul office, has awarded a contract for the fabrication of Miter Gate Strut Arm Assemblies under solicitation W912ES26CA020. The award was made to the lowest fully responsive bidder following a bid opening on September 9, 2026, which saw three total submissions. As part of the award, the government unilaterally exercised an option for Item 0002 to acquire four additional strut arm assemblies. This project is designated as a total Small Business Set Aside under NAICS code 332312. The work will be performed in Russellville, Alabama, and the primary point of contact for the award is John Riederer.

General Info

DoD awarded Miter Gate Strut Arm Assembly fabrication to a small business.

Agency

Department Of Defense → W07V Endist St Paul

Contract Value

$1,182,780

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

Russellville, AL, 35654, USA

Set-Aside

SBA

Awardee

G & G STEEL INC

Award Issued Date

09/14/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedSep 14

Award Notice

AwardedSep 14

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W07V Endist St Paul

Contacts1 person available

OfficeSAINT PAUL, MN, 55101-1323, USA

Organization / AgencyDepartment Of Defense → W07V Endist St Paul

Office AddressSAINT PAUL, MN, 55101-1323, USA

Contacts

John Riederer

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

This is a CONTRACT AWARD NOTICE. The bid opening for solicitation W912ES26BA020 was held on 9 September 2026. Three bids were received. The contract was awarded to the lowest fully responsive bidder. The Government unilaterally exercised the Option for Item 0002 (four additional strut arm assemblies) at contract award.

Similar Contracts

Same NAICS industry code

Forklift Safety Cage SupplyThis subcontract involves the supply and delivery of one forklift safety cage for prime contractors working on Mississippi Department of Revenue Alcoholic Beverage Control facility projects. The required equipment must be compatible with either leased or owned forklifts and must adhere to all minimum agency specifications. The safety cage is to be delivered directly to the project site located in Clinton, Mississippi. The solicitation was posted on October 20, 2026, with a response deadline set for November 24, 2026, under NAICS code 332312.

MS DEPT of REVENUE

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Waste Container Supply and FabricationThis subcontract for Waste Container Supply and Fabrication involves the design, manufacture, and delivery of industrial-grade steel waste containers and dumpsters for prime contractors working on Brazos River Authority projects. The selected provider is responsible for ensuring all units meet specific durability and capacity requirements set by the authority, covering both the initial supply of containers and the replacement of any damaged units. The contract is categorized under NAICS code 332312 and requires the delivery of completed containers directly to the designated project sites. Interested parties must submit their responses by November 10, 2026, following the posting date of October 20, 2026.

BRAZOS RIVER AUTHORITY

POSTED

about 13 hours ago

DEADLINE

Lighting Transformer Bases and Breakaway Hardware SupplierThis subcontract agreement establishes a supplier for aluminum transformer bases and specialized breakaway safety bolts intended for lighting poles on City of Aurora, Illinois projects. The supplier is responsible for procuring specific hardware, including Valmont Breakaway Transformer Bases models TB1-17 and TB5-9, Pelco Transformer Base model TB2N-1, and Transpro Breakaway Bolts model SPM4100. All provided materials must be new and free from defects, with the scope of work covering the delivery of both the transformer bases and the associated hardware kits to prime contractors. Managed under the Engineering agency in Illinois, the contract is categorized under NAICS code 332312. The solicitation was posted on October 20, 2026, with a response deadline set for November 4, 2026. This arrangement ensures that critical safety and structural components for municipal lighting infrastructure meet the precise technical specifications required for city projects.

POSTED

about 13 hours ago

DEADLINE

ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)

Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf

This solicitation, issued by Parsons Corporation, seeks a qualified contractor for the design, fabrication, and delivery of towers at various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. To be eligible for award, the offeror must be fully bonded and insured. The opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The project falls under NAICS code 332312 and is managed by primary point of contact Thomas Sheehan.

Parsons Corporation

POSTED

about 13 hours ago

DEADLINE

Way Finding Signage FabricationThis subcontract for Way Finding Signage Fabrication involves the production of custom signage for prime contractors working on City of Savannah municipal projects. The scope of work includes the fabrication of sign substrates and frames through CNC routing, bending, and the application of weather-resistant coatings. To ensure durability and compliance, the contractor must apply UV-stable vinyl and reflective sheeting in accordance with MUTCD standards, with final delivery of all sign panels and posts to the designated installation sites. The opportunity was posted on October 20, 2026, with a response deadline of November 3, 2026. Classified under NAICS code 332312, this project supports infrastructure within the state of Georgia. Interested parties can find further details through the Georgia procurement portal under solicitation PE-62551-NONST-2026-000000243.

City of Savannah

POSTED

about 14 hours ago

DEADLINE

ASTM A36 Steel Adapter Blade SupplierThis subcontract involves the fabrication and supply of structural steel adapter blades and setup kits for prime contractors working on State of New Hampshire Das Purchasing projects. The supplier is responsible for cutting and punching adapter blades in 3-foot and 4-foot lengths using ASTM A36 Structural Grade hot rolled flat steel, ensuring specific top and bottom hole patterns are executed for 5/8 inch bolts. Additionally, the scope includes the assembly of 11-foot plow setup kits and the delivery of all finished steel components. To ensure compliance with state standards, the supplier must submit detailed shop drawings for approval by the NHDOT Highway Maintenance department. This procurement is managed through the New Hampshire Das Purchasing agency under NAICS code 332312, with a response deadline set for November 9, 2026.

Das Purchasing (statewide Bids & Contracts)

POSTED

about 14 hours ago

DEADLINE

Structural Steel Fabrication and SupplyThis small business set-aside subcontract involves the fabrication and supply of structural steel components for prime contractors working on US Army MICC-Fort Drum projects. The scope of work specifically requires the production of 14-gauge steel 8" x 20' double slope eave beams with a 1:12 pitch and 8" x 20' C-purlins. These components must meet brand-name or equal specifications and be finished with red iron, red oxide, or galvanized coatings. The contract is managed under the Department of Defense and requires strict adherence to the Buy American Act, including mandatory certification and identification of the country of origin for all materials. Interested parties must respond by October 27, 2026, for this project categorized under NAICS code 332312.

W6QM Micc-Ft Drum

POSTED

about 17 hours ago

DEADLINE

Structural Steel I-Beam SupplyThis small business set-aside subcontract through the Department of Defense involves the supply of new, hot-rolled structural steel I-beams for prime contractors working on US Army projects at the W6QM Micc-Ft Drum. The requirement consists of 120 total beams, specifically 60 W10x19 beams at 25 feet and 60 W6x25 beams at 20 feet. All materials must adhere to AISC 360-22 LRFD design standards and be delivered in good usable condition with only minor surface rust permitted. Compliance with the Buy American Act is mandatory, requiring the contractor to provide certifications and clearly identify the country of origin for all supplied steel. The project is categorized under NAICS code 332312 and is designated for performance in the 74501 zip code area.

W6QM Micc-Ft Drum

POSTED

about 17 hours ago

DEADLINE

New Lock Stoplogs

Solicitation # W911XK27BA005

W072 Endist Detroit

POSTED

about 17 hours ago

DEADLINE

Welding and FabricationThis subcontract opportunity with Slayden Constructors, Inc. involves providing specialized welding and metal fabrication services for the Medford RWRF project. The selected contractor will be responsible for fabricating structural steel components and welded joints, as well as the delivery of these finished metal components to support prime contractors. The opportunity is designated as an SBA set-aside, making it available to various small business categories, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by November 19, 2026, under NAICS code 332312.

Slayden Constructors, Inc.

POSTED

about 23 hours ago

DEADLINE

Request for Proposals for Purchase and Delivery of Bus Passenger Shelter for St. Lawrence County

Solicitation # 2140057

St. Lawrence County is soliciting bids for the purchase and delivery of one 12 by 5 foot bus passenger shelter featuring a solar lighting package. The shelter must be new and unused, constructed with a structural aluminum frame, and include a roof designed to meet local wind and snow load requirements. Key integrated features must include a mounted bench and a solar power system consisting of a roof-mounted panel, batteries, a controller, a 5-watt LED light, and dual USB charging ports. The vendor is responsible for the fabrication, assembly, and delivery of the unit, while the Town of Massena will handle the final on-site assembly. All components must strictly adhere to the Americans with Disabilities Act of 1990 requirements. The contract will be awarded to the lowest responsible vendor who meets all technical specifications. Bidders must submit a comprehensive package including detailed technical specifications, a variance page, a bid sheet, and signed certifications regarding non-collusion and federal and state clauses. Compliance with Buy America requirements, the Omnibus Procurement Act of 1992, and various federal regulations regarding debarment and non-discrimination is mandatory. Sealed bids are due to the St. Lawrence County Purchasing Office by November 19, 2026, at 3:00 PM. Payment processing is managed through the New York State Bureau of State Expenditures, and the agreement is subject to available budgetary appropriations.

St. Lawrence County

POSTED

DEADLINE

Supply of 90-Degree Lightweight Steel Sheet Pile CornersThis subcontract involves the supply of 90-degree lightweight steel sheet pile corners for prime contractors working on State of Louisiana procurement projects under the agency of Transportation and Development. The scope of work requires the manufacture or sourcing of 5-gauge, hot-dipped galvanized Type F corner piles that strictly adhere to ASTM A857 standards. To ensure quality and compliance, the provider must furnish notarized certified mill test reports written in English. The specific delivery requirement consists of six 20-foot long steel sheet piles, totaling 120 linear feet. This procurement is categorized under NAICS code 332312, with a response deadline set for October 27, 2026.

Transportation and Development

POSTED

DEADLINE

More opportunities from Department Of Defense → W07V Endist St Paul

Same awarding agency

Well Replacement at Lac Qui Parle Project shop site

Solicitation # W912ES27QA002

Solicitation W912ES27QA002 is a firm-fixed-price contract issued by the U.S. Army Corps of Engineers, St. Paul District, for a well replacement project at the Lac Qui Parle Project shop site in Watson, Minnesota. This acquisition is a 100% small business set-aside under NAICS 237110, with an estimated construction magnitude between $25,000 and $60,000. The scope of work requires a Minnesota-licensed well driller to install a new well with a 5-inch PVC casing within 30 feet of the existing site, including new underground wiring to the shop building and the installation of a concrete slab around the base of the new well. Additionally, the contractor must abandon the old well by pulling the pump, sealing the casing with bentonite grout, and restoring the surface. The performance period is 205 calendar days, with all work required to be completed by June 1, 2027. Key deliverables include a detailed system drawing submitted prior to the start of work. The project must adhere to the Corps of Engineers Safety and Health Manual EM-385-1-1 and Minnesota Department of Health Rules Chapter 4725. Bids are due by 7:00 AM on October 22, 2026, and must be submitted via Standard Form 1442. The contract is subject to Davis-Bacon Act prevailing wage rates and requires performance and payment bonds. Notably, the St. Paul District does not use Wide Area Workflow for invoicing, requiring contractors to submit payment requests through alternative methods specified in the contract.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Used Commercial Mower Acquisition/BrokerageThis small business set-aside subcontract, managed by the Department of Defense under the W07V Endist St Paul agency, involves the acquisition and removal of a used 2015 Hustler Zero Turn Mower from the USACE Orwell Project facility. The contractor is responsible for inspecting and taking possession of Model 934281, Serial 15048245, and must coordinate the removal of this trade-in unit simultaneously with the delivery of new equipment. The scope of work specifically requires the contractor to provide an equipment trailer to facilitate the transport of the mower from the project site. This brokerage and acquisition effort is categorized under NAICS code 441110, with a response deadline set for October 28, 2026.

New Car Dealers

POSTED

DEADLINE

Specialized Equipment Hauling and DeliveryThis small business set-aside subcontract involves the specialized hauling and delivery of a commercial zero-turn mower for prime contractors working on USACE Orwell Project facility projects in Fergus Falls, Minnesota. The selected provider is responsible for transporting the equipment to the project office and performing all necessary unloading at the destination. To qualify, the contractor must utilize a flatbed trailer or equipment hauler equipped with a lift gate or appropriate loading and unloading ramps. Additionally, the provider is required to maintain valid DOT registration and standard commercial hauling insurance. The solicitation was posted on October 15, 2026, with a response deadline of October 28, 2026, under NAICS code 484220 for the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Commercial-Grade Zero-Turn Mower SupplierThis subcontract opportunity, issued by the Department of Defense through the W07V Endist St Paul, seeks a supplier to provide one new commercial-grade zero-turn mower for prime contractors working on USACE Orwell Project facility projects. The required equipment must feature a minimum 72-inch cutting deck with a 7-gauge structural steel shell and dual-plate reinforcement. Power specifications require at least 25 HP for diesel engines or 35 HP for gasoline engines, and the unit must include a hydrostatic zero turn drive and a ROPS safety system. The contract is designated as a total Small Business Set Aside under NAICS code 441110. A critical compliance requirement is the provision of DoD unique identification in accordance with DFARS 252.211-7003. The solicitation was posted on October 15, 2026, with a response deadline set for October 28, 2026.

New Car Dealers

POSTED

DEADLINE

Lawn Mower with Trade

Solicitation # W912ES27QA007

Solicitation W912ES27QA007 is a total small business set-aside issued by the Department of Defense for the U.S. Army Corps of Engineers, St. Paul District. The requirement is for the supply and delivery of one new commercial-grade zero-turn mower with 10 hours of use or less to the Orwell Project in Fergus Falls, Minnesota. The contractor is provided the option to accept a trade-in of a 2015 Hustler Zero Turn Mower, which must be taken possession of at the time of the new mower's delivery. The delivery deadline is February 15, 2027, and the contractor is responsible for all transportation and unloading costs to the destination. The contract is a firm-fixed-price arrangement where the award will be made to the responsible offeror providing the most advantageous offer based on price. Compliance requirements include the use of two-dimensional data matrix symbology for item unique identification and adherence to Buy American and domestic commodity preferences. Offerors must be registered in the System for Award Management and submit their quotes in PDF format via the Procurement Integrated Enterprise Environment portal by October 28, 2026. Payment will be made in accordance with the Prompt Payment Act, and invoices must be submitted directly as the St. Paul District does not utilize Wide Area Workflow.

Lawn and Garden Tractor and Home Lawn and Garden Equipment Manufacturing

POSTED

DEADLINE

Industrial Variable Frequency Drives (VFDs)

Solicitation # W912ES26QA115

Solicitation W912ES26QA115, issued by the U.S. Army Corps of Engineers St Paul District, seeks the procurement of factory-new, commercial-off-the-shelf ABB ACS880 Series Variable Frequency Drives (VFDs) and associated factory options. These drives are critical for operations on the Dredge Goetz, specifically supporting the cutter head, main pump motors, ladder, swing and spud drives, and the carriage drive. To ensure system compatibility and prevent unacceptable downtime, the government has issued a brand name justification limiting competition to ABB brand spares. This is a total small business set-aside procurement that will be awarded as a single firm fixed price contract to the responsible offeror providing the most advantageous price. The contractor must deliver the hardware to the Civil Works Service Base in Fountain City, Wisconsin, by February 26, 2027, with the contractor bearing all transportation costs and risk of loss until destination acceptance. Deliverables include the VFD units, a technical data package consisting of OEM manuals and drawings, a certificate of conformance, and a warranty for at least 12 months from commissioning or 18 months from delivery. All units must be 100 percent factory-new, moisture-barrier wrapped, and compliant with IEEE, UL, and CE standards, including Safe Torque Off rated SIL 3 / PL e. Strict marking requirements apply, including permanent OEM nameplates and MIL-STD-129 and MIL-STD-130 compliant labeling. Offers must be submitted in PDF format via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Proposals must include the offeror's Unique Entity Identifier, CAGE code, and a statement of agreement with all solicitation terms. Pricing must be provided in whole penny amounts with shipping costs integrated into the CLIN pricing. The government will evaluate offers based on price, and final acceptance will be executed by the USACE Receiving Official following an inspection for damage and configuration accuracy within 10 business days of receipt.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Site Restoration and SeedingThis small business set-aside subcontract involves site restoration and seeding for prime contractors on USACE St. Paul District projects located in Watson, Minnesota. The scope of work requires the contractor to return work areas to their original condition by filling abandoned well voids with black dirt, seeding restored areas, and removing construction debris for off-site disposal in accordance with local and state codes. The project is managed under the Department of Defense and mandates strict adherence to EM-385-1-1 safety standards. Interested parties must note the response deadline of October 22, 2026, for this opportunity categorized under NAICS code 561730.

Landscaping Services

POSTED

DEADLINE

Existing Well Sealing and AbandonmentThis small business set-aside subcontract involves the decommissioning and sealing of an existing water well for prime contractors on USACE St. Paul District projects located in Watson, Minnesota. The scope of work includes pulling the existing pump, sealing the casing with bentonite grout, cutting the casing to a depth of 1.5 to 2 feet below grade, and removing all associated electrical controls and wiring. The contractor is responsible for delivering a sealed and abandoned well that fully complies with MN Department of Health Chapter 4725 and EM-385-1-1 safety standards. This project falls under NAICS code 238910 and is managed through the Department of Defense.

Site Preparation Contractors

POSTED

DEADLINE

New Water Well Drilling and InstallationThis subcontract opportunity involves the drilling and installation of a new operational water well system for prime contractors on USACE St. Paul District projects located in Watson, Minnesota. The scope of work includes drilling the well, installing 5 inch PVC casing, a well pump, and buried wiring to the regulator and controls. Additionally, the contractor is responsible for connecting the system to the existing underground waterline and installing a 1-1/4 inch brass ball valve, ultimately delivering a fully operational system along with the required technical drawings. Eligible bidders must hold a Minnesota state well drilling license and ensure all work complies with Minnesota Department of Health Chapter 4725 and EM-385-1-1 safety standards. This project is designated as a total Small Business Set Aside under NAICS code 238910. Interested parties must submit their responses by October 22, 2026.

Site Preparation Contractors

POSTED

DEADLINE

Turnkey Ground Delivery to Fountain City, WIThis subcontract, titled Turnkey Ground Delivery to Fountain City, WI, involves providing final ground transportation services for prime contractors on US Army Corps of Engineers projects. The selected provider will be responsible for hauling oversized modified containers from a fabrication site to Fountain City, Wisconsin, utilizing flatbed or heavy-haul equipment. To ensure compliance, all shipments must adhere to MIL-STD-129 labeling requirements and ISO/IEC standards for unique item identifier bar-coding. Managed by the Department of Defense under the W07V Endist St Paul agency, this opportunity is designated as a total Small Business Set Aside under NAICS code 484220. The solicitation was posted on October 7, 2026, with a response deadline of October 23, 2026. The primary scope of work concludes upon the successful delivery of the containers to their final destination in zip code 54629.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Marine-Grade Exterior Coating and Safety PaintingThis subcontract opportunity, titled Marine-Grade Exterior Coating and Safety Painting, is issued by the Department of Defense through the W07V Endist St Paul agency. The project involves providing specialized industrial painting and coating services for prime contractors working on US Army Corps of Engineers projects. The scope of work requires the application of durable, commercial-grade exterior coatings designed for marine or outdoor exposure on containers, as well as the application of an industrial safety yellow finish to all gantry rails and modified components. The contract is designated as a Total Small Business Set Aside under NAICS code 238320, with the place of performance located in zip code 54629. Interested parties must submit their responses by the deadline of October 23, 2026. The successful contractor will be responsible for the delivery of all fully coated and painted containers and components as specified in the project requirements.

Painting and Wall Covering Contractors

POSTED

DEADLINE

1-Ton LHE Manual Chain Hoist SystemThis subcontract opportunity, posted by the Department of Defense under the W07V Endist St Paul agency, requires the supply and certification of a 1-ton capacity Load Handling Equipment manual chain hoist system. Designed for prime contractors on US Army Corps of Engineers projects, the system must be capable of extending 6 feet beyond one side of the container footprint. The scope of work includes the delivery of the integrated hoist system along with all mandatory safety certification documentation. The project is designated as a total Small Business Set Aside under NAICS code 333911, with performance taking place in zip code 54629. Interested parties must submit their responses by the deadline of October 23, 2026.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS