Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

MK-48 AXLE ASSEMBLY

Active
DON-SNOTE-051103-002Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Contracting and Purchasing Division at the Marine Corps Logistics Base in Barstow, California, plans to award a sole source contract to MTP Drivetrain Services LLC, located in Many, Louisiana. The requirement is for four axle assemblies specifically identified as Oshkosh Part No. 1429480U, NSN 2530-01-184-8827. This procurement is urgent, mandating delivery within 60 days of the order receipt. Responses to this solicitation must be submitted in writing and received by November 7, 2005, no later than 4:30 P.M. PST. If no written responses are received by this deadline, the contract will be awarded to MTP Drivetrain Services without further notice. The acquisition is designated as a 100% small business set-aside. The contract is titled "MK-48 AXLE ASSEMBLY" and was publicly posted on November 3, 2005. The contracting office handling the requirement is part of the Department of Defense, specifically the Commanding Officer's office at Marine Corps Logistics Base Barstow. The point of contact for this procurement is June Henley, a contract specialist who can be reached by phone or fax for any inquiries. The solicitation emphasizes the urgency and exclusivity of this procurement, reiterating the critical timeframe for delivery and the reliance on MTP Drivetrain Services as the sole source vendor.

General Info

Sole source contract to MTP Drivetrain for four MK-48 axle assemblies, delivery in 60 days.

NAICS

336992 - Military Armored Vehicle, Tank, and Tank Component Manufacturing

Place of Performance

CA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Commanding Officer
ContactsNo contacts available
OfficeBARSTOW, CA, 92311-5050, USA
Office AddressBARSTOW, CA, 92311-5050, USA
ContactsNo contact information available

Full Description

Show more
The Contracting and Purchasing Division, Marine Corps Logistics Base, Barstow, California intends to make a sole source award to MTP Drivetrain Services LLC, 205 McDonald Drive, Many, Louisiana 71449-0610. Requirement is for a quantity of (4) Axle Assemblies, Oshkosh Part No. 1429480U, NSN 2530-01-184-8827. This is an urgent requirement with delivery date within 60 days upon receipt of order. Responses must be in writing and received in this office by November 7, 2005, no later than 4:30 P.M. PST. If no affirmative written responses are received, a contract will awarded to the above referenced contractor without further notice. This is 100% set-aside for small business. See Notes 1 & 22. POC: June Henley, Contract Specialist, Phone: +1 (555) 000-0000, Fax: +1 (555) 000-0000

Similar Contracts

Same NAICS industry code

NAICS: 336992
New
DIBBS
PAD, SLIDE
Solicitation # SPE7L0-27-T-0049
Solicitation SPE7L0-27-T-0049 is a request for quotations issued by the DLA Weapons Support Land Supply Chain ESOC Buys for the procurement of three slide pads. The required material is identified by NSN 2590997481421 and corresponds to KNDS Defence UK Limited part number G414/4699 item 15. The original required delivery date is October 28, 2026, with a delivery timeframe of five days after the order. Items are to be shipped via the fastest traceable means, excluding parcel post, to the DLA LMP Zone 1 facility in Texarkana, Texas. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination. The procurement is subject to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must comply with RP001 for palletization and MIL-STD-129 for marking and labeling. Administratively, the contractor must utilize the Wide Area Workflow system for electronic invoicing and payment requests. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, prohibitions on certain telecommunications equipment, and compliance with the Buy American Act and Berry Amendment. Offerors are encouraged to submit quotes via DIBBS and may provide quantity ranges due to volatile demand.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336992
New
DIBBS
DOOR, HATCH, VEHICLE
Solicitation # SPE7L1-27-T-2815
Solicitation SPE7L1-27-T-2815 is a small business set-aside for the procurement of one vehicle hatch door, identified by NSN 2510-00-809-7114. The item is to be manufactured via a metal casting process in accordance with specific technical drawings and MIL-DTL-11356. The contract includes requirements for a First Article Test and a Production Lot Test, with the latter requiring a detailed report and supporting documentation, including DD Form 1222 and DD Form 250/iRAPT. Delivery is required within 160 days after the order, with the first article test due within 90 days. The place of performance and delivery is Fort Hood, Texas, with FOB terms set to origin. The contractor must adhere to strict quality and security standards, including an inspection system compliant with SAE AS9003 or ISO 9001 and an approved JCP certification for accessing export-controlled data. Technical inspection is required at the actual manufacturing facility, and acceptance is based on a zero non-conformance sampling plan. Packaging and marking must comply with ASTM D3951 and MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, CMMC Level 2 cybersecurity requirements, and prohibitions on covered defense telecommunications equipment.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → Commanding Officer

Same awarding agency

NAICS: 333413
New
Federal
26-SIMACQ-D20-0005 D-Dept Control System Parts/Supplies BPA
Solicitation # N6339426Q4060
Solicitation N6339426Q4060 is a request for quotations from the Naval Surface Warfare Center Port Hueneme to establish a multi-award, five-year Blanket Purchase Agreement (BPA) for D-Department control system parts and supplies. This acquisition is a total small business set-aside under NAICS 333413, with a specific focus on women-owned small businesses. The scope includes the procurement of various electronic components, such as network media converters, power supplies, sensors, and printer hardware, all of which must adhere to the technical specifications detailed in the Salient Characteristics attachment. The BPA will utilize firm-fixed unit pricing, and individual call orders will be competed among BPA holders, with a maximum value of 900,000 dollars per order. Awards are based on a technically acceptable basis, requiring quoters to be authorized resellers and maintain an active CMMC Level 1 (Self) status in the Supplier Performance Risk System. While the BPA remains open for five years, the government evaluates quotes on a rolling basis to award Master BPAs as requirements arise. Successful contractors must comply with MIL-STD-130 for unique item identification and MIL-STD-129 for shipping labels. All invoicing and payment requests must be processed through Wide Area Workflow (WAWF). Interested parties must submit their quotes in PDF format, including a completed price list and part list, to the designated point of contact.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in almost 5 years
View Details
NAICS: 334519
New
Federal
Vertical Launching System (VLS) Launch Sequencer (LSEQ) Multiple Award Contract (MAC) Indefinite Delivery Indefinite Quantity (IDIQ)
Solicitation # N6339426R0005
The Naval Surface Warfare Center, Port Hueneme Division is soliciting proposals for a Multiple Award Contract (MAC) under an Indefinite Delivery Indefinite Quantity (IDIQ) vehicle to procure the LSEQ MK 6 Mod 1 (NAVSEA p/n 8652144-19) and associated Lowest Replaceable Units (LRUs) for the MK 41 Vertical Launching System (VLS). The scope of work includes the fabrication, assembly, testing, and delivery of critical components such as Missile Electronics Boxes, Hazard Electronics Boxes, ethernet switch modules, power tray modules, relay module assemblies, and single-mode fiber optic cable assemblies. The contract also requires the performance of a Physical Configuration Audit and the incorporation of approved Diminishing Manufacturing Sources and Material Shortages changes into the system Technical Data Package. The total combined maximum value for all orders is 458,090,782 dollars, with a minimum award value of 1,000 dollars per awardee. The government intends to award no more than two contracts based on a best value tradeoff process, with technical capability and capacity weighted significantly more than price and past performance. Proposals must be submitted in two separate volumes via the Procurement Integrated Enterprise Environment, with a delivery schedule of 54 weeks from the date of award. The contract utilizes a firm fixed price model with stepladder pricing across a five-year ordering period. Quality standards are strictly governed by ASQ/ANSI/ISO 9001:2015 and MIL-STD-129R for marking and packaging. Additionally, the contractor must comply with Cybersecurity Maturity Model Certification requirements and maintain strict operations security and information protection protocols.
Other Measuring and Controlling Device Manufacturing

POSTED

6 days ago

DEADLINE

in 26 days
View Details
NAICS: 812332
New
Federal
27-SIMACQ-E80-0001 Shop Towels
Solicitation # N6339427Q4004
Solicitation N6339427Q4004 is a small business set-aside for the Naval Surface Warfare Center (NSWC) PHD to establish a weekly delivery service of glass towels for the production shop at Seal Beach, California. The contractor is required to provide an initial inventory of 500 lint-free cotton towels on the first day of service, followed by a recurring weekly exchange of 250 clean towels for 250 soiled towels, preferably every Wednesday. The towels must be 14 by 25 inches, 5 oz per square yard, with a plain weave. The contract is structured as a firm fixed price agreement consisting of a base year from December 1, 2026, through September 28, 2027, with multiple option years extending through September 2030. Award will be based on the lowest price technically acceptable (LPTA) method, evaluating total price, technical capability, and past performance. The contractor must utilize the Wide Area WorkFlow (WAWF) system for all electronic invoicing and payment requests. Performance is FOB Destination, with inspection and acceptance occurring at the Port Hueneme facility. Offerors must maintain active registration in the System for Award Management (SAM) and submit their quotes in PDF format to the primary point of contact by November 5, 2026. Compliance with various FAR and DFARS clauses is required, including Buy American regulations and specific cybersecurity reporting standards.
Industrial Launderers

POSTED

6 days ago

DEADLINE

in 8 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS