Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Mobilization and Site Preparation

Active

Federal

Response Deadline08/19/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to mobilization and site preparation activities for the Loveland Field Maintenance Building, requiring full setup of tools, equipment, and staging areas to support ongoing operations. Comprehensive job site safety planning is a critical component, ensuring all activities comply with established protocols and regulatory standards. The work is classified as a subcontract under the SBA set-aside category, with the NAICS code 238990 indicating it falls under other construction-related services. The solicitation was posted on August 4, 2026, and responses are due by August 19, 2026, with the performance location tied to the Department of Energy’s Western Rocky Mountain Region. Although specific city and state details for the place of performance are not provided, the scope is centered on preparing the Loveland site for field maintenance activities under federal oversight.

General Info

Mobilization and site prep for Loveland Field Maintenance Building under SBA set-aside, due August 19, 2026, DOE Western Rocky Mountain Region.

Agency

Department Of Energy → Western Rocky Mountain RegionView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

Not specified

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 08:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Energy → Western Rocky Mountain Region

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Energy → Western Rocky Mountain Region

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Mobilization to the Loveland Field Maintenance Building, including setup of tools, equipment, staging areas, and job site safety planning.

Similar Contracts

Same NAICS industry code

Site Preparation and Grading

DLA DIST SAN JOAQUIN

POSTED

about 9 hours ago

DEADLINE

City of Williams – Wastewater Collection System Improvement Project (Job No. 2290.16)

Solicitation # 2290.16

The City of Williams is seeking qualified contractors for the Wastewater Collection System Improvement Project, identified as Job No. 2290.16, with an estimated contract value of $4.1 million. The scope of work includes replacing up to 10,500 linear feet of 8-inch to 24-inch collection pipeline, replacing laterals and installing new two-way cleanouts within the right-of-way, replacing manholes, and lining approximately 320 linear feet of a 15-inch collection pipeline. The project requires the supply of materials such as aggregate and asphalt, precast concrete manholes, ready-mix concrete, waterworks pipe and fittings, and the provision of services including sawcutting, shoring rental, SWPPP services, striping, traffic control, and trucking. All subcontractors must comply with applicable state, county, and federal regulations as detailed in the project specifications. The solicitation is restricted to small businesses and emphasizes participation by certified DBE and SBE firms, encouraging second-tier subcontracting and procurement from certified small disadvantaged, women-owned, HUBZone, veteran-owned, and service-disabled veteran-owned small businesses. Bid submissions are due by August 8, 2026, at 2:00 PM, with plans and specifications available through an online portal or by email to Ranger Pipelines, Inc., the contracting entity. Bonding, insurance, and line of credit requirements will be provided directly by Ranger Pipelines, Inc., and the place of performance is located in California. The solicitation is issued as a Request for Quotes with no specified contract type or line-item pricing, leaving pricing and detailed terms to be determined by respondent proposals.

Ranger Pipelines Incorporated

POSTED

about 10 hours ago

DEADLINE

Crack Sealing Application ServicesThe contract entails performing crack sealing services on Interstate 10 within El Paso County, requiring thorough cleaning of pavement cracks followed by the application of hot-applied rubberized sealant in full compliance with Texas Department of Transportation specifications. The work is intended to preserve pavement integrity and extend road life by preventing water infiltration and further deterioration through precise, specification-driven sealant application techniques. All activities must adhere to TxDOT standards for material quality, application methods, and operational safety protocols. This is a subcontract opportunity under NAICS code 238990, with a response deadline of September 2, 2026, and was posted on August 5, 2026. The contracting authority is the Texas Department of Transportation, and performance is limited to IH-10 in El Paso County. Interested parties must submit proposals through the Texas SmartBuy portal by the specified deadline, and the work is structured as a subcontract rather than a direct award, indicating it is part of a larger project managed by a prime contractor. There is no set-aside provision specified, meaning all eligible subcontractors may compete regardless of size or business classification.

Texas Department of Transportation

POSTED

about 10 hours ago

DEADLINE

Sign Installation and Structural Steel WorkThe contract encompasses the on-site removal of existing signage and the installation of new signs mounted on breakaway posts, gantries, or cantilever arms, with full responsibility for bolting, precise alignment, and proper grounding to ensure compliance with safety and structural standards. All work must be performed in accordance with industry best practices and transportation safety regulations, requiring skilled labor and specialized equipment to handle elevated installations and demolition tasks safely and efficiently. The contract is classified as a subcontract under NAICS code 238990 and is issued by the Texas Department of Transportation, with responses due by September 3, 2026. The place of performance is within Texas, though specific locations are not detailed, indicating the work may span multiple sites across the state. Bidders must be prepared to mobilize onsite, manage logistics for sign removal and installation in active roadway environments, and adhere to all state and federal requirements for public infrastructure projects. The solicitation is accessible via the Texas SmartBuy portal for qualified subcontractors.

Texas Department of Transportation

POSTED

about 10 hours ago

DEADLINE

Exterior Door Installation and Labor ServicesComplete installation of exterior doors is required, encompassing the removal of existing doors, proper framing adjustments, weatherproofing to ensure resistance to environmental elements, installation of all necessary hardware, and a final inspection to confirm compliance with contract specifications. The work must adhere strictly to all documented requirements and standards outlined in the contract documents, ensuring durability, functionality, and safety. This subcontract under NAICS code 238990 is issued by BOE Maintenance in Connecticut with a response deadline of September 1, 2026, and is open for bidding through the specified procurement portal.

BOE Maintenance

POSTED

about 10 hours ago

DEADLINE

Non-Electric Traffic Control Signage DeploymentThe City of San Antonio is seeking a subcontractor to install, maintain, and manage non-electric traffic control infrastructure including signage, rumble strips, and temporary control devices. This procurement falls under NAICS code 238990, covering other specialized construction activities, and is intended for work to be performed within the city’s jurisdiction. The contract opportunity was posted on August 5, 2026, with a firm response deadline of September 4, 2026, at 8:00 PM. All performance will take place in San Antonio, Texas, focusing on enhancing road safety through physical traffic control measures that do not require electrical power. The project requires expertise in durable material installation, adherence to traffic control standards, and ongoing maintenance to ensure visibility and functionality under varying environmental conditions. Subcontractors must be prepared to coordinate with local authorities and comply with all applicable safety and regulatory requirements during deployment and maintenance activities.

CITY OF SAN ANTONIO

POSTED

about 10 hours ago

DEADLINE

Raised Pavement Marker (RPM) InstallationThe contract is for the supply and installation of raised pavement markers including Botts' dots and reflective domes to clearly delineate lanes on roadways within the City of San Antonio. It is classified as a subcontract under NAICS code 238990 and is open for bids with a response deadline of September 4, 2026. The work will be performed locally in Texas, with no specific city or zip code designated for performance. The posting date shows the opportunity became publicly available on August 5, 2026, and interested parties must submit proposals before the deadline to be considered. The contract is administered through the Texas SmartBuy platform, and all details and submissions are handled via the provided online portal. There is no set-aside designation, meaning all eligible contractors may compete regardless of business size or ownership characteristics.

CITY OF SAN ANTONIO

POSTED

about 10 hours ago

DEADLINE

Pavement Marking Installation and MaintenanceThe contract titled Pavement Marking Installation and Maintenance involves the removal and installation of reflective pavement markings on city roadways within San Antonio, including stripes, legends, and crosswalks. The work is being procured as a subcontract under the NAICS code 238990, with a response deadline of September 4, 2026, and was posted on August 5, 2026. All tasks must align with local standards for visibility, durability, and safety, ensuring that markings meet or exceed regulatory requirements for nighttime and weather-condition readability. The project is administered by the City of San Antonio, Texas, and performance is expected to occur across various city roadways, though specific locations are not detailed. The subcontractor is responsible for all materials, labor, equipment, and compliance with traffic control protocols during execution. No set-aside provisions have been designated, and the contract does not specify a point of contact, with the official solicitation details accessible through the provided Texas SmartBuy portal link.

CITY OF SAN ANTONIO

POSTED

about 10 hours ago

DEADLINE

T32-D7-Fencing-I20 EB/WB-Rockdale-190813

Solicitation # 48400-eRFQ-001899-2027

The Georgia Department of Transportation is soliciting bids for the installation, repair, and maintenance of fencing associated with state highway infrastructure, limited to contractors previously qualified through the department’s prequalification process for this specific service. Eligibility is restricted to those who have successfully completed the required prequalification as mandated under Georgia law, ensuring only experienced and vetted contractors may respond. The solicitation is governed by the terms of MMSA 48400-410-000033618 and the official ITB/RFQ form, and all respondents must fully adhere to the instructions provided, as failure to comply may result in bid rejection. The Department retains full discretion to modify contract terms, add new provisions, or waive minor irregularities at any point during the procurement process. The solicitation, identified as T32-D7-Fencing-I20 EB/WB-Rockdale-190813 under reference number 48400-eRFQ-001899-2027, was posted on August 5, 2026, with a response deadline of September 1, 2026. Work will be performed in Rockdale County, Georgia, and all contractual obligations must be fulfilled in accordance with state statutes authorizing ancillary services for public road construction and maintenance. Primary point of contact for inquiries is Timothy Swink, reachable by phone or email, and all submissions must be made through the official Georgia procurement portal. Bidders are strongly advised to review the complete solicitation materials prior to submission, as the State Entity reserves the right to reject any or all bids without explanation.

Department of Transportation

POSTED

about 12 hours ago

DEADLINE

Repoint Mortar at Fort Sumter

Solicitation # DOIDFBO260078

The National Park Service’s Historic Preservation Training Center is seeking a qualified small business contractor to perform repointing work at Fort Sumter by designing, erecting, assembling, and installing scaffolding on the exterior right face wall, which measures 100 feet in length and 25 feet in height. The project requires full provision of labor, materials, and equipment necessary to safely support the repointing operation, with all work performed in accordance with historic preservation standards. The solicitation, issued under DOIDFBO260078, is a Small Business Set Aside, ensuring eligibility is restricted to businesses certified as small by the SBA, and is categorized under NAICS code 238990 for other construction specialties. The opportunity was posted on August 5, 2026, with responses due by August 19, 2026, at 9:00 PM Eastern Time. The contracting office is based in Herndon, Virginia, under the Department of the Interior’s IBC Acquisition Services Directorate, and inquiries should be directed to Angelina Clements, the primary point of contact, via phone or email provided in the solicitation.

Ibc Acq Svcs Directorate (00004)

POSTED

about 14 hours ago

DEADLINE

Chain-link Fence Purchase and Installation

Solicitation # 69727626Q000003

The contract is for the purchase and installation of a chain-link fence at the Division of Gulf Operations, specifically covering the Warehouse Loading Dock and Parking Area at Poland Street Wharf, Berth 3, Door 38, New Orleans, Louisiana, 70146. This procurement is issued under solicitation number 69727626Q000003 and is classified as a combined solicitation with a Small Business Set Aside—Total designation, meaning only small business concerns are eligible to compete. The North American Industry Classification System code is 238990, which corresponds to other specialty trade contractors. The awarding agency is the Department of Transportation’s Maritime Administration, with the office located in New Orleans, Louisiana, 70130, and the work must be performed at the specified site in New Orleans, 70146. The solicitation was posted on August 5, 2026, with a deadline for responses set for August 21, 2026, at 3:00 PM Eastern Time. Primary point of contact for inquiries is Carolyn Quinn, reachable via email at carolyn.quinn@dot.gov. All proposals must be submitted through the official SAM.gov portal linked in the solicitation.

697276 DOT Maritime Administration

POSTED

about 14 hours ago

DEADLINE

Y--Sources Sought Notice for Scaffolding for Chalmette Monument

Solicitation # DOIDFBO260079

The Department of the Interior, through the Interior Business Center’s Acquisition Services Directorate, is conducting market research via a sources-sought notice for a scaffolding system to support conservation work at the Chalmette Monument in New Orleans, Louisiana. The goal is to identify qualified small business vendors capable of designing, erecting, maintaining, and dismantling a full-enclosure, non-invasive scaffold system around the 100-foot stone obelisk without attaching to or drilling into the historic structure. The project requires a scaffold with five staging platforms (rated for 1,000 lbs each), five water tank platforms (rated for 3,000 lbs each), a hoisting bay with a 1-ton electric hoist, debris netting, overhead protection rated for 150 PSF, and OSHA-compliant integrated stairs. All work must be completed within a fixed three-month rental period, with mobilization and demobilization occurring outside of that window, and the site must be closed to the public during active operations. The contract is anticipated to be awarded as a Firm-Fixed-Price arrangement under NAICS code 238990, which carries a small business size standard of $19 million in annual revenue, and the procurement is restricted to small business sources. Respondents must submit a single Microsoft Word document, no longer than ten pages using 11-point Times New Roman font, via email to sarah_ignacio@ibc.doi.gov by August 14, 2026, with the subject line “Scaffolding System for Chalmette Monument.” Proposals must include a cover sheet with the vendor’s Unique Entity ID and CAGE code, along with Section 1 detailing past performance on at least one similar historic preservation project within the last three years, including contract numbers, locations, values, and points of contact. Section 2, offering comments on the draft scope of work, is optional. The contractor must designate a competent person certified under OSHA 29 CFR 1926 Subpart L to inspect and certify the scaffold prior to use and before each shift, submitting a written report to the National Park Service’s Contracting Officer’s Representative for formal acceptance. There is no publicly disclosed evaluation methodology, award basis, or pricing structure, as this is a pre-solicitation market research tool. Performance will occur at the Chalmette Battlefield Park, with administrative oversight handled remotely from Herndon, Virginia. No packaging,

Ibc Acq Svcs Directorate (00004)

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Energy → Western Rocky Mountain Region

Same awarding agency

Trash Collection & Disposal for Cheyenne WY

Solicitation # 89503226QWA000742

The solicitation seeks contractors to provide comprehensive trash collection and disposal services for the Cheyenne Field Office in Wyoming under a Lowest Price Technically Acceptable (LPTA) evaluation methodology. The work encompasses the labor, equipment, supplies, and supervision necessary to collect, transport, and dispose of municipal solid waste and construction debris in full compliance with federal, state, and local safety and environmental regulations, including OSHA 29 CFR 1910, EPA guidelines, USDA BioPreferred standards, and the SNAP Program. Performance is required at the Cheyenne Field Office location at 4825 S. Industrial Road, Cheyenne, WY 82001, with inspection and acceptance occurring at the delivery point. The contract structure includes a base year and four optional one-year extension periods, for a potential total performance period of five years. Two specific service line items are defined: monthly collection of a 30-yard roll-off dumpster and weekly collection of a 6-yard dumpster, with pricing to be submitted by offerors in Attachment C. All technical proposals must meet acceptability standards and demonstrate compliance with required regulatory frameworks, after which the lowest priced acceptable offer will be selected. Offerors must submit their responses exclusively via email to contracting officer Carol L. Hammans at hammans@wapa.gov, with no phone inquiries permitted. Proposals must include the SF-1449 form, Statement of Work (Attachment A), Wage Determinations (Attachment B), and Pricing Schedule (Attachment C). The contract requires adherence to numerous federal acquisition regulations and Department of Energy-specific clauses, including wage determinations under the Davis-Bacon Act, insurance mandates, whistleblower protections, lobbying restrictions, and anti-human trafficking compliance for contracts exceeding $700,000. Invoicing must be submitted electronically through the Invoice Processing Platform (IPP), and payment-related accounting data (AAC, TAS, ACRN) must be accurately completed on all invoices. Offerors must be currently registered in SAM and self-certify their small business status, including any applicable socioeconomic designations, and provide valid Unique Entity Identifiers and CAGE codes. The contracting office, located in Loveland, Colorado, retains full authority over contract administration, with no designated Contracting Officer’s Representative identified. All submissions are due by August 10, 2026, and failure to comply with format, content, or submission requirements will result in rejection.

Solid Waste Collection

POSTED

about 22 hours ago

DEADLINE

Door Repair and ReconditioningThe contract titled Door Repair and Reconditioning pertains to the repair and reconditioning of existing doors and related components that are not slated for full replacement, encompassing tasks such as realignment, adjustment of hardware, and replacement of seals. It is issued as a subcontract under the Small Business Administration set-aside program, targeting qualified small businesses to perform specialized maintenance work. The North American Industry Classification System code 238290 indicates the work falls under Other Construction Related Activities, specifically supporting facility upkeep rather than new construction. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and is managed by the Department of Energy’s Western Rocky Mountain Region. While specific geographic performance locations and contact details are not provided, the work is expected to occur at facilities under the agency’s purview within that region. The contract emphasizes precision and durability in restoring functional integrity to doors through targeted interventions rather than replacement, ensuring continued operational reliability while promoting cost-efficiency and resource conservation.

Other Building Equipment Contractors

POSTED

DEADLINE

Painting and Finishing ServicesThe contract seeks subcontracted services for the surface preparation and application of finishes to doors, frames, and hardware, ensuring compliance with specified aesthetic and corrosion resistance standards. Performance of the work is tied to the Western Rocky Mountain Region under the Department of Energy, with the North American Industry Classification System code 238390 indicating specialty trade contractors for building finishing. The solicitation is designated under the SBA set-aside program, prioritizing small business participation. The opportunity was posted on August 4, 2026, with responses required by August 19, 2026, and all work must be carried out in alignment with the technical and quality requirements for protective and decorative coatings on architectural metal components.

Other Building Finishing Contractors

POSTED

DEADLINE

Sealant and Gasketing ApplicationThe contract calls for the installation of elastomeric joint sealants and gasketing systems specifically designed to ensure effective air and smoke control within door assemblies, aiming to meet stringent safety and building code requirements for containment and environmental integrity. The work is scoped to support critical infrastructure where fire and smoke barrier performance is essential, requiring precise application techniques and approved materials capable of maintaining seal integrity under varying thermal and pressure conditions. This is a subcontract under the SBA set-aside program, classified under NAICS code 238290 for other specialized construction activities, indicating it is targeted toward small businesses. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, and falls under the jurisdiction of the Department of Energy’s Western Rocky Mountain Region. Although specific location details are not provided, performance is expected to occur within the region governed by this agency, and all work must comply with federal standards for material suitability, application quality, and safety enforcement.

Other Building Equipment Contractors

POSTED

DEADLINE

Door Hardware Supply and InstallationThe contract involves the supply and installation of certified door hardware including hinges, closers, locks, and panic devices, all of which must comply with ANSI/BHMA A156.18 standards and be suitable for wet-environment conditions. The work requires strict adherence to performance and durability specifications to ensure reliability in high-moisture settings, and all materials must be certified and properly documented. Installation must be performed by qualified personnel to meet code requirements and functional expectations for safety and accessibility. This is a subcontract under the SBA set-aside program, classified under NAICS code 332215, and is managed by the Department of Energy’s Western Rocky Mountain Region. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, and the place of performance is not specified but will likely be within the agency’s regional jurisdiction. Interested parties must submit proposals through FedConnect prior to the deadline, and the contract does not include a designated point of contact or exact location details beyond the agency overseeing the procurement.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Installation of Steel Doors and FramesThe contract titled Installation of Steel Doors and Frames mandates the on-site installation of new steel doors and frames with full compliance to fire- and smoke-rating standards. Work includes precise alignment, secure anchoring, and all associated labor necessary to meet regulatory safety requirements. The scope is confined to the physical placement and integration of the components at an undisclosed location within the Western Rocky Mountain Region, where the Department of Energy is the contracting agency. This is a subcontract awarded under the SBA set-aside program, designated by the NAICS code 238290 for other building equipment contractors. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026. All work must be executed in accordance with applicable codes and performance specifications without reliance on external documentation. The contract does not specify a detailed site address, and no point of contact is listed, with all inquiries and submissions directed through the FedConnect portal linked in the posting.

Other Building Equipment Contractors

POSTED

DEADLINE

Supply of Steel Doors and FramesThe contract pertains to the manufacture and delivery of new steel doors and frames that must comply with specific fire- and sound-rating standards, ensuring they meet required safety and acoustic performance criteria for institutional or federal use. The solicitation falls under the NAICS code 332322, which classifies it as related to metal door and frame manufacturing, and is designated as a Small Business Administration set-aside, aiming to provide opportunities for qualified small businesses to compete. The offering is structured as a subcontract and is managed by the Department of Energy under its Western Rocky Mountain Region, with responses due by August 19, 2026, and the solicitation posted on August 4, 2026. The place of performance and precise delivery locations are not specified, but the materials must be produced and delivered in accordance with federal compliance standards. Interested parties must submit proposals through the FedConnect portal using the provided link prior to the deadline.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Demolition of Existing Doors and ComponentsThe contract titled Demolition of Existing Doors and Components involves the complete removal and proper disposal of all existing doors, frames, hardware, gasketing, and sealants at the Loveland facility under a subcontract awarded by the Department of Energy through its Western Rocky Mountain Region. The work is classified under NAICS code 238990 and is set aside for small business administration participation, indicating priority for small business contractors. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, at 8:00 PM. All demolition activities must be conducted in compliance with applicable safety and environmental regulations to ensure safe handling and disposal of materials. The place of performance is the Loveland facility, though specific location details are not provided, and the contract is accessible through the FedConnect portal for further information.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Cheyenne Area Comm Bldg HVAC

Solicitation # 89503226QWA000744

The Western Area Power Administration’s Rocky Mountain Region is soliciting bids for the replacement and repair of doors, frames, glazing, and hardware at the Loveland Field Maintenance Building located at 5555 E. Crossroads Blvd, Loveland, Colorado. The work involves complete removal and disposal of existing door assemblies and installation of new steel doors and frames meeting ANSI/SDI A250.8, NFPA 80, UL10C, and other applicable industry and federal standards, with all hardware required to carry permanent certification labels from ANSI/BHMA, UL, NFPA, and SDI. Fire-rated doors must be labeled with their fire rating and include an “S” designation for smoke control, while sealants and finishes must comply with ASTM C920-11 and related specifications. The project is governed by a Firm-Fixed Price contract under FAR clauses including 52.211-10 Alternate I, 52.236-21 Alternate I, and 52.246-21, with compliance to DOE-specific requirements such as mitigating supply chain risk, reporting fraud and waste, and adhering to sustainable acquisition guidelines. The contractor must begin work within 30 days of notice to proceed and complete all tasks within 180 days, with mobilization and preparatory costs capped at 5% of the total bid price. Offers must encompass all solicited items on an all-or-nothing basis, and proposal submissions must be made electronically via the Treasury’s Invoice Processing Platform and Procore Construction Management software, with acceptable file types including PDF, Word, Excel, and AutoCAD formats, the latter requiring accompanying PDFs. All proposals must be submitted by August 19, 2026, and will be evaluated under a Lowest Price Technically Acceptable framework, where responsiveness and strict adherence to technical and compliance requirements are mandatory for award consideration; no discussions will be held, and non-responsive bids will be rejected outright. The Contracting Officer, John Pratt, and Contracting Officer’s Representative, Adam Haun, will oversee inspection, accept work at the site, and enforce quality standards in accordance with FAR 52.246-12 and referenced technical specifications. Payment will only be processed through electronic invoicing via IPP.gov, with no paper invoicing permitted. Contractual obligations include adherence to federal wage determinations, anti-discrimination laws, environmental protections, and reporting protocols for fraud, waste, or

Other Building Equipment Contractors

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract titled Structural Steel Fabrication and Erection is a subcontract under the SBA set-aside program, specifically targeting small businesses, for the fabrication and on-site assembly of structural steel components used in buildings or bridges. The work is to be performed under the purview of the Department of Energy's Western Rocky Mountain Region, with a solicitation posted on August 3, 2026, and responses due by September 4, 2026. The North American Industry Classification System code 332312 applies, indicating the scope involves structural metal fabrication and related erection services. While the exact location of performance is not specified, the work is expected to occur within the Western Rocky Mountain region under the agency's oversight. The subcontract opportunity is accessible through the FedConnect portal, and bidders must meet SBA eligibility requirements to qualify, as no other set-aside classification is indicated.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ready-Mix Concrete SupplyThe contract pertains to the supply of ready-mix concrete for a project under the Department of Energy’s Western Rocky Mountain Region, with requirements specifying precise slump, compressive strength, and admixture content to meet technical standards. The contract is structured as a subcontract under the Small Business Administration’s set-aside program, designated by NAICS code 327320, indicating it is meant for businesses classified in the concrete product manufacturing sector. The solicitation was posted on August 3, 2026, with a response deadline set for September 4, 2026, allowing interested contractors a limited window to submit proposals. Performance of the work is tied to a project site within the Western Rocky Mountain Region, though exact location details are not provided. The contract is accessible via the FedConnect portal, and while no point of contact information is listed, vendors are expected to adhere to the technical specifications and deliver concrete that complies with the designated engineering and material requirements for the duration of the project.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

Heavy Haul Trucking and Material TransportThe contract titled Heavy Haul Trucking and Material Transport is a subcontract solicited by the Department of Energy under the Western Rocky Mountain Region, focused on the transportation of heavy, oversized construction materials, equipment, and debris to and from project sites. It is classified under NAICS code 484220, indicating specialized freight trucking, and is set aside for small business administration participation, ensuring eligibility and preference for qualifying small businesses. The solicitation was posted on August 3, 2026, with a response deadline of September 4, 2026, requiring interested parties to submit proposals within this timeframe. The place of performance is not specified in the details, suggesting flexibility in location across the Western Rocky Mountain Region, while the contract does not include a designated point of contact or physical office address. Interested bidders must access the solicitation through the FedConnect portal to obtain full details and submit their bids.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE