Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Model-Based Systems Engineering (MBSE) & Simulation

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → FA8659 Aflcmc EbiView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Northridge, CA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedDec 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8659 Aflcmc Ebi

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8659 Aflcmc Ebi

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Development and maintenance of digital system models, performance simulations, and trade studies using MBSE tools for weapon system design and analysis.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to support a range of major construction projects across its facilities. These services will span the full lifecycle of projects including planning, design, construction, and closeout phases, with a focus on Design Build, Progressive Design Build, and alternative delivery methods. The contractor will be responsible for ensuring that all projects adhere to approved schedules, budgets, and quality standards while coordinating with Port staff and stakeholders to deliver complex infrastructure initiatives efficiently and effectively. The contract will serve as the primary mechanism for securing CM expertise across multiple future projects without specifying individual task orders at this time. The solicitation is classified under NAICS code 541330 for Architectural, Engineering, and Related Services and is managed by the Port’s Construction Management division. Primary point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson. The contract is forecasted for release in July 2026, though no formal solicitation number or set-aside details have been published. Performance will occur at various Port of Seattle locations, and interested firms are encouraged to monitor the official Port portal for official posting and submission guidelines. All contractors must demonstrate proven experience in managing large-scale public construction projects under similar delivery models.

Construction Management

POSTED

about 5 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a continuous 24/7/365 environment. The focus is on identifying and correcting performance deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, reliability, comfort, and longevity while ensuring compliance with safety and regulatory standards. All work will be executed under Service Directives and executed in close coordination with Aviation Facilities and Infrastructure to meet agreed-upon deliverables. The contract is structured as an IDIQ vehicle under NAICS code 541330 and is managed by the Port of Seattle’s Aviation Facilities and Infrastructure division. Point of contact for inquiries and coordination includes Jason Gates as the primary liaison and Jim Farris as the project manager, with all communication and administrative details centered through the Port of Seattle’s official procurement portal. The solicitation was posted in July 2026 and is intended to establish a framework for ongoing support services critical to maintaining the airport’s complex operational systems.

Aviation Facilities & Infrastructure

POSTED

about 5 hours ago

DEADLINE

Mechanical, Electrical, and Plumbing (MEP) EngineeringThe contract seeks qualified firms to design mechanical, electrical, plumbing, and fire protection systems for public buildings under a subcontract arrangement, classified under NAICS code 541330 for architectural and engineering services. The solicitation was posted on July 25, 2026, with a response deadline set for September 7, 2026, and is being managed by the State of Utah, though no specific city or office address is provided. Scope of work includes comprehensive MEP system design for public infrastructure projects, requiring technical expertise in integrated building systems to meet safety, efficiency, and code compliance standards. While no set-aside provisions or point of contact details are listed, interested parties must submit proposals through the designated online portal by the stated deadline.

POSTED

DEADLINE

in about 1 month

Structural Engineering ServicesThe contract titled Structural Engineering Services seeks qualified providers to perform structural analysis and design for buildings and structures, with specific emphasis on foundation systems and seismic evaluations to ensure compliance with safety and resilience standards. Work is expected to involve detailed engineering assessments, modeling, and documentation to support the integrity and durability of constructed facilities under dynamic and environmental loads. The opportunity is categorized as a subcontract and was posted on July 25, 2026, with responses due by September 7, 2026, and is governed under NAICS Code 541330 for architectural and engineering services. All performance obligations are tied to the state of Utah, though no specific city or address is provided, and the contracting entity is identified as the Utah state agency without further organizational subdivision or point of contact details listed.

POSTED

DEADLINE

in about 1 month

BD26-XX Pre-Qualified Design Professional Services Pre-Qualified Vendor ListThe State of Utah Division of Purchasing is seeking statements of qualifications from design professionals to establish a pre-qualified vendor list for architectural and engineering services, under the solicitation number BD26-XX. This open-ended list will remain active for twelve months from the date of approval, after which vendors must resubmit their qualifications for renewal. The State reserves the right to reopen the solicitation at any time, though not more frequently than once every twelve months, to accommodate additional qualified vendors or adjust criteria as needed. The posting date is July 25, 2026, with responses due by September 7, 2026, and all selections will be managed through the state’s procurement platform. Interested firms must submit their credentials to be considered for inclusion, which does not guarantee work but enables eligibility for future project assignments. The point of contact for this solicitation is Brayden Dent, reachable via email at braydend@utah.gov, and all submissions must be made through the official online portal at the provided UI link. The procurement is not subject to any specific set-aside classifications and applies across the State of Utah with no designated city or zip code for performance, meaning services may be required anywhere within the state. Vendors are expected to demonstrate relevant experience, expertise, and capability in design services appropriate for public sector projects. Approval does not constitute a contract or commitment to award work but allows the State to directly engage pre-qualified firms as needs arise, streamlining the selection process for time-sensitive or recurring design projects.

POSTED

DEADLINE

in about 1 month

Quality Assurance and Sampling Inspection ServicesThis contract requires the performance of quality assurance and sampling inspection services under MIL-STD-1916 or ASQ H1331 Table 1, with a strict zero tolerance policy for any non-conformances on critical, major, and minor attributes. The work involves rigorous inspection protocols to ensure every product meets exacting standards without exception, targeting high-stakes components where even minor deviations are unacceptable. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the intent to support small business participation in defense-related quality initiatives. The NAICS code 541330 indicates the primary focus is on scientific and technical consulting services, specifically quality control and inspection activities, and the contracting activity is under the ASC Commodities Division of the Department of Defense. The opportunity was posted on July 25, 2026, with a response deadline of August 8, 2026, providing a two-week window for qualified small businesses to submit proposals. While no specific place of performance or point of contact is detailed in the provided data, the work is tied to a Defense Logistics Agency procurement platform, suggesting inspections will support the broader DOD supply chain. The absence of an office address or zip code implies that the location of performance may be flexible or determined by the nature of the subcontracted materials being inspected, potentially across multiple facilities or contractor sites under the DOD’s control. The requirement underscores the critical importance of precision and compliance in defense-related quality assurance, where failure to meet zero tolerance standards could compromise operational readiness and safety.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply Chain Traceability & Quality Documentation ServicesThe contract requires comprehensive documentation and recordkeeping services to ensure end-to-end supply chain traceability in alignment with DLA quality standards, focusing on full visibility and accountability across all procurement and logistics activities. All work must adhere to the specified compliance framework to support audit readiness and operational integrity, with deliverables designed to validate the provenance and integrity of materials throughout the supply chain. This subcontract falls under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by July 31, 2026. The place of performance and point of contact details are not specified, but performance is expected to support DLA’s broader mission of maintaining rigorous quality control across defense supply networks.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Inspection, Testing, and Quality Assurance ServicesThe contract requires the performance of technical inspection and testing on newly manufactured compressor ducts at both their origin and destination locations to verify full compliance with established engineering and qualification standards. This work is critical to ensuring that each duct meets stringent performance, safety, and reliability criteria before being accepted for use in defense-related systems. The scope is focused on quality assurance through rigorous testing protocols and documentation, with an emphasis on traceability and adherence to technical specifications throughout the supply chain. This is a subcontract under the NAICS code 541330 for engineering services, issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on July 25, 2026, with a response deadline of August 25, 2026. While specific location details for performance are not provided, the work must be conducted at manufacturing sites and final delivery points to cover the full lifecycle of the components. There is no set-aside designation, indicating this opportunity is open to all eligible contractors, and the successful bidder will be responsible for delivering comprehensive inspection reports and test data to confirm regulatory compliance.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

On-Site Security System Testing & Compliance VerificationThe contract titled On-Site Security System Testing & Compliance Verification requires the performance of scheduled functional testing on security alarm components to ensure operational integrity and adherence to federal standards. Tasks include verifying system functionality, documenting test results, and providing support necessary for annual certification. All work must be conducted on-site at the specified location in Salem, with a zip code of 01970, and must meet rigorous compliance benchmarks tied to federal requirements for security systems. The contractor is expected to deliver thorough and accurate records to facilitate regulatory certification. This is a subcontract under NAICS code 541330, posted by the Department of the Interior through its office Ner Services Mabo (43000). The solicitation opened on July 25, 2026, with a deadline for responses set for August 7, 2026, at 2:00 PM. No set-aside classification is designated, and the contract is not associated with a specific point of contact or additional office address beyond the place of performance. All work must be completed in accordance with the stated federal compliance framework and submitted for certification purposes within the contractual obligations.

Ner Services Mabo (43000)

POSTED

DEADLINE

Generator Condition Assessment & ReportingThe contract requires comprehensive assessments of generator systems to ensure operational readiness and compliance, encompassing load bank testing to verify performance under simulated full-demand conditions, emissions evaluations to meet environmental standards, and detailed fuel quality analyses to detect contamination or degradation that could compromise system reliability. All findings and test results must be compiled into formal technical reports and submitted electronically via email, with copies retained for audit purposes to support accountability and regulatory compliance. The work is scoped as a subcontract under NAICS code 541330, which pertains to engineering services, and is issued by the Texas Department of Public Safety with a response deadline of August 14, 2026. The assessment activities are critical for maintaining emergency power infrastructure and must be performed to a high standard of technical accuracy and documentation rigor.

Department of Public Safety

POSTED

DEADLINE

Diagnostic and Troubleshooting Services for Water Treatment EquipmentThe contract awards services to perform up to three diagnostic evaluations aimed at identifying malfunctions within a water treatment system. Each evaluation includes comprehensive testing, root cause analysis, and detailed reporting to ensure accurate identification and documentation of system failures. The work is focused on ensuring operational integrity and compliance with water treatment standards, with all activities to be conducted at a designated location in Fresno. This is a subcontract under the NAICS code 541330, categorized as a professional, scientific, and technical service. The solicitation was posted on July 25, 2026, with responses due by August 11, 2026, at 10:00 PM Pacific Time. The contracting agency is the California Department of Fish & Wildlife, operating under the state of California, and the work is intended to support water infrastructure reliability within the state’s environmental management framework.

California Department of Fish & Wildlife

POSTED

DEADLINE

MEP Engineering ServicesTexas Southern University is seeking qualified subcontractors to provide MEP engineering services for the design and integration of HVAC, electrical, plumbing, and fire alarm systems within renovated study rooms. The project requires seamless coordination across all disciplines to ensure functional, code-compliant, and efficient building systems that support the academic environment. The contract is open for responses until August 18, 2026, with work to be performed on campus at the university’s location. The solicitation falls under NAICS code 541330, classifying it as architectural and engineering services, and is structured as a subcontract opportunity through the Texas SmartBuy procurement portal. Bidders must demonstrate expertise in multi-system integration and experience with institutional facility upgrades, though no specific set-aside provisions apply. All proposals must align with the university’s operational standards and technical requirements for renovated study spaces.

Texas Southern University

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8659 Aflcmc Ebi

Same awarding agency

Counter Air Missile Program (CAMP)-Ground Launched Counter Air (GLCA) Enterprise Test Vehicle (ETV) Solicitation ReleaseThe Air Force Life Cycle Management Center’s Armament Directorate is soliciting proposals under a 10 U.S.C. 4022 Prototype Other Transaction agreement for the Counter Air Missile Program—Ground Launched Counter Air Enterprise Test Vehicle, aiming to develop a supersonic, affordable, digitally engineered, and modular ground-launched missile system with an integrated Common Containerized Launcher. This effort is designed to accelerate the prototyping and demonstration of commercial or minimally modified subsystems, addressing rising complexity and extended development timelines in defense acquisition, with the potential to transition into a follow-on Family of Affordable Mass Missiles program should prototyping succeed and funding be secured. Proposals must be submitted by 4:00 PM Central Daylight Time on August 3, 2026, with in-person oral presentations scheduled for the week of August 10, 2026, and vendors must notify the government of their intent to respond by July 10, 2026. Access to the controlled solicitation document package, which contains Controlled Unclassified Information restricted to Distribution D, is limited to prime vendors registered in the Joint Certification Program through the Defense Logistics Agency or otherwise verified as capable of handling CUI, requiring submission of a valid DD Form 2345 to designated government points of contact. Only U.S. citizens or lawful permanent residents physically located in the United States may access the information, and foreign-owned or foreign-controlled entities are explicitly prohibited from participating as primes or subcontractors. All respondents must be actively registered in the System for Award Management and bear all costs associated with proposal development, as the government will not reimburse any bid or administrative expenses. No contract award is guaranteed, and the government retains the right to cancel the solicitation at any time without obligation or compensation. The acquisition is conducted under FA8659-26-R-9001, with correspondence directed to Garet Simmons, Brent Barnhill, and Susan Sparks, and all documentation must be downloaded from SAM.gov; no hard copies will be provided.

Guided Missile and Space Vehicle Manufacturing

POSTED

DEADLINE

Precision Components and Subsystems SupplyThe contract solicits the supply of high-reliability components including actuators, valves, sensors, and composite materials critical for the assembly of ETV and CCL systems, with an emphasis on enabling rapid integration of commercial subsystems. These components must meet stringent performance and durability standards to support mission-critical aerospace and defense applications. The work is tied to a subcontract under the Department of Defense, specifically managed by the FA8659 Aflcmc Ebi entity, and performance is required at a location in Goulds. The solicitation, posted on July 9, 2026, requires proposals to be submitted by August 3, 2026, and falls under the NAICS code 332215 for Machine Shop, Turned Product, and Screw, Nut, and Bolt Manufacturing. The nature of the work demands suppliers with proven expertise in precision manufacturing and quality assurance for high-reliability environments.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Digital Engineering and Simulation SupportThe contract seeks comprehensive digital engineering and simulation support for ETV and CCL systems, requiring advanced digital modeling, simulation, and virtual testing capabilities including finite element analysis, computational fluid dynamics, and implementation of a digital thread for end-to-end lifecycle management. The work demands high-precision engineering simulations to evaluate system performance under operational conditions without physical prototyping, enabling data-driven decision-making across design, validation, and maintenance phases. This is a subcontract opportunity under NAICS code 541330, issued by the Department of Defense through the FA8659 Aflcmc Ebi office, with performance expected to occur in Goulds. The solicitation was posted on July 9, 2026, and responses are due by August 3, 2026, at 9:00 PM. While no specific set-aside designation is listed, the contract is structured for experienced providers capable of delivering integrated digital engineering solutions to support defense system development and sustainment.

Engineering Services

POSTED

DEADLINE

Avionics and Guidance System IntegrationThe contract involves the integration of advanced navigation, guidance, and control systems into the ETV, focusing on the fusion of inertial measurement units, GPS-denied navigation capabilities, and flight control software built on an open architecture framework. The work requires developing and implementing robust avionics solutions that maintain operational effectiveness in environments where traditional satellite navigation is unavailable, ensuring autonomous and reliable vehicle performance. The system must be modular and scalable to support future upgrades and interoperability with other defense platforms. This subcontract is issued under the Department of Defense, specifically by the FA8659 Aflcmc Ebi office, with a NAICS code of 334511 indicating a focus on navigational, measuring, electromedical, and control instruments manufacturing. The response deadline is set for August 3, 2026, and performance is expected to occur in Goulds, Florida. The contractor will be responsible for delivering fully validated hardware and software components that meet stringent defense standards for reliability, precision, and real-time processing under dynamic flight conditions.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Common Containerized Launcher (CCL) DevelopmentThe contract involves the design, fabrication, and testing of the Common Containerized Launcher (CCL), a system engineered for rapid deployment and seamless integration with transport and storage platforms. It encompasses the development of mechanical systems, launch sequencing protocols, and all associated subsystems necessary to ensure reliable and repeatable operational performance. The project demands end-to-end engineering capabilities, from conceptual design through final qualification testing, with an emphasis on ruggedness, modularity, and compatibility with existing military logistics frameworks. Performance is centered in Goulds, with a strict submission deadline of August 3, 2026, and the solicitation was posted on July 9, 2026. Classified as a subcontract under NAICS code 332996, it falls under the Department of Defense’s purview through the FA8659 Aflcmc Ebi office. While no set-aside provisions are specified, the work requires advanced manufacturing and systems integration expertise to meet defense-grade standards for mobility, speed of deployment, and operational readiness in austere environments.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

ETV Airframe and Structural DesignThe contract involves the design and engineering of a supersonic ETV airframe, requiring advanced aerodynamic modeling, comprehensive structural analysis, and seamless integration of modular subsystems through digital prototyping and Model-Based Systems Engineering tools. The work demands expertise in high-speed flight dynamics and robust structural design to meet the technical challenges of supersonic performance, with emphasis on precision, reliability, and system-level cohesion throughout the development lifecycle. The solicitation is classified as a subcontract under NAICS code 336412, associated with the Department of Defense and specifically managed by FA8659 Aflcmc Ebi. The opportunity was posted on July 9, 2026, and responses are due by August 3, 2026, at 9:00 PM. Performance is expected to take place in Goulds, though no specific facility details are provided. No set-aside designation applies, and the contract is open to qualified subcontractors capable of delivering next-generation airframe solutions using modern engineering methodologies.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Fielding, Logistics, and Support Equipment Development

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

Manufacturing Readiness & Production Planning

Drafting Services

POSTED

DEADLINE

Cybersecurity & System Resiliency Engineering

Architectural Services

POSTED

DEADLINE

Systems Integration & Aircraft Modification

Engineering Services

POSTED

DEADLINE

Software & Firmware Development for Weapon Systems

Computer Systems Design Services

POSTED

DEADLINE

Hardware Design & Prototype Fabrication

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE