Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from National Aeronautics And Space Administration was posted on June 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Modified Hydrogen Electric Power System Procurement

Awarded
80NSSC26936853QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

NASA Shared Services Center is procuring a Modified Hydrogen Electric Power System (mHEPS) from Teledyne Energy Systems under a sole source contract authorized by FAR 12.102(a), as Teledyne is identified as the sole provider of this technology. The procurement, identified by solicitation number 80NSSC26936853Q, falls under NAICS Code 335999 and is being conducted using commercial items procedures outlined in FAR Part 12. Performance will occur at NASA Glenn Research Center, where the mHEPS will be modified to operate independently using GRC-supplied reactants, coolant, and electrical loads. The system is part of NASA’s Regenerative Fuel Cell Project aimed at enabling sustainable lunar surface operations. The modification includes updates to the coolant loop, electrical interface, ejector and reactant supply systems, and control algorithms to enable stable autonomous operation targeting 1.5 kW. The contractor must conduct in-house validation testing, perform pre-shipment inspection and preservation, and deliver the system along with a comprehensive Standard Operating Procedure. Milestone-based payments are tied to three deliverables: submission of a kick-off presentation within two weeks of award, delivery of the SOP by three months, and physical delivery of the mHEPS and documentation to GRC by four months. On-site support of up to three days for installation and training, plus two months of remote engineering support during NASA’s testing window, are required. The contractor must also implement safety measures including alarms, interlocks, grounding, and compliance with GRC safety standards. The NASA FAR Supplement Clause 1852.215-84 on the Ombudsman applies, and all capability submissions must be submitted in writing by 3:00 p.m. Central Standard Time on June 30, 2026, to [email hidden]; oral communications are prohibited. The government retains full discretion to determine if the procurement proceeds as sole source or becomes competitive.

General Info

NASA sole-sources Teledyne for modified hydrogen electric power system at Glenn Research Center, via FAR Part 12, response due June 30, 2026.

Contract Value

$203,588

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component Manufacturing

Place of Performance

MS, USA

Set-Aside

NONE

Award Issued Date

Documents

1

NASA RFC Project Modified Hydrogen Electrical Power System Statement of Work

PDF, High priority: read this firstsow
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
Contacts1 person available
OfficeSTENNIS SPACE CENTER, MS, 39529, USA
Office AddressSTENNIS SPACE CENTER, MS, 39529, USA
Contacts
kacey Hickman

Full Description

Show more

NASA/NSSC has a requirement for Modified Hydrogen Electric Power System Procurement.



NASA/NSSC intends to issue a sole source contract to Teledyne Energy Systems under the authority of FAR 12.102(a). It has been determined that Teledyne Energy Systems 10707 Gilroy RD Hunt Valley Maryland 21031 – 1311 United States is the sole provider of Modified Hydrogen Electric Power System Procurement



NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Glenn Research Center (GRC).
The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial



The NAICS Code for this procurement is 335999.



Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 3:00 p.m. Central Standard Time on 6/30/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.



Oral communications are not acceptable in response to this notice.



NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf .
Primary Point of Contact:
contact@example.gov

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 334519
New
Federal
Transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials.
Solicitation # 80NSSC27946410Q
NASA Shared Services Center is seeking a transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials, specifically to advance the understanding of low-toxicity monopropellants. The requirement is for a Thermtest THW-L1S unit capable of measuring thermal conductivity, thermal diffusivity, and volumetric specific heat of liquids and phase change materials. Technical specifications include a temperature range of at least -50C to 200C, ASCENT compatible wetted surfaces, the ability to measure samples across a range of viscosity, and integration capabilities for an external chiller or heater unit. Performance will take place at Lab 105E in Building 4205 at the Marshall Space Flight Center, with testing scheduled to begin in the winter of 2026. This procurement is being conducted under NAICS code 334519 as a commercial item acquisition following FAR Part 12. NASA intends to issue a sole source contract to Thermtest Inc, as they have been determined to be the sole provider of the required equipment. This notice is currently a request for capability statements rather than price quotes to determine if the procurement can be conducted on a competitive basis. Interested organizations must submit their qualifications to the identified points of contact by 8:00 a.m. CST on October 30, 2026. All submissions must reference the notice ID, and oral communications are not permitted.
Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541512
New
Federal
Vision Technologies Installation Services KSC
Solicitation # 80NSSC26946930Q
The NASA Shared Services Center is seeking to award a sole source contract to Vision Technologies, LLC for the installation of cellular Distributed Antenna System (DAS) services at the NASA Kennedy Space Center, specifically for the K6 B2496 building. This procurement, categorized under NAICS code 541512, is intended as an 8(a) sole source acquisition under FAR 12.102(a) for commercial items and services. The scope of work involves providing materials, project management, and engineering services to establish LTE and NR cellular coverage. Vision Technologies will be responsible for designing the system to industry standards, procuring DAS materials, and installing head end and active equipment, while cabling and antenna installation will be handled by others. The contractor is required to configure, test, commission, and monitor the system to ensure proper operation with a live signal. Key deliverables include submittal drawings, antenna placement locations, testing methodology, and comprehensive close-out documentation consisting of as-built information, firmware revisions, equipment serial numbers, and warranty documentation. Final acceptance is contingent upon a verification test and validation survey once the system is operational. Interested organizations were requested to submit capability statements by October 30, 2026, to determine if the procurement should be conducted on a competitive basis.
Computer Systems Design Services

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334519
New
Federal
Yateks 3D video borescope system
Solicitation # 80NSSC27946179Q
Solicitation 80NSSC27946179Q is a firm-fixed-price contract opportunity issued by the NASA Shared Services Center for the procurement of a Yateks 3D video borescope system for the Goddard Space Flight Center. This is a brand-name requirement specifically for the Yateks Realta 3D system, which includes the iShot Imaging E Series Monitor Kit (PN: EM10418). The system was selected for its specialized capabilities, including motorized 360-degree articulation, forward-facing stereo 3D measurement, and full-HD imaging. The procurement is set aside for small businesses under NAICS code 334519, with delivery expected within one to two weeks after receipt of order. Shipping is FOB Destination to Greenbelt, Maryland. The award will be granted based on the lowest price technically acceptable (LPTA) criteria. To be eligible, responses must be submitted by authorized resellers only and must include a letter of authorization and proof of manufacturer pricing. Offerors must be registered in the System for Award Management (SAM) and include their CAGE code or Unique Entity ID on the proposal. All quotes are due by October 22, 2026, and must be submitted via email to Cody Guidry. The contract includes specific requirements for duty-free entry marking and strict compliance with U.S. export control laws, including ITAR and EAR regulations.
Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 13 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS