This Presolicitation opportunity from Department Of Agriculture was posted on September 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Modified Shipping Containers for Guam

Closed

12639526Q0285Federal

Submission Closed09/17/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332311

New

Federal

Western Area Power Administration (WAPA) Sierra Nevada Region (SNR) has a requirement for a equipment shelter at the Elverta Maintenance Facility (EMF) in Elverta, CA, to include onsite installation.The Western Area Power Administration, under the Department of Energy's Sierra Nevada Region, is forecasting a requirement for an equipment shelter to be located at the Elverta Maintenance Facility in Elverta, California. This project encompasses both the procurement of the shelter and its complete onsite installation. The opportunity is categorized under NAICS code 332311 and is designated as a small business set-aside. Western Metal Supply Company, Inc. is listed as the incumbent contractor for this requirement. Interested parties may coordinate with the Small Business Program Managers for further information.

Western Area Power Administration

POSTED

DEADLINE

Fabrication and Supply of Valve Actuator GuardsThis subcontract involves the fabrication and supply of 1,282 Valve Actuator Guards for the DLA Weapons Support Land Supply Chain. The manufacturer is responsible for producing the units according to Army and DCSC Drawing 16236 CS-2300-0001 specifications, applying Chemical Agent Resistant Coatings, and adhering to MIL-STD-1916 zero-based sampling standards. Finished, coated, and packaged guards must be delivered to DLA Distribution Barstow. To be eligible for this project, the contractor must maintain CMMC Level 2 and ITAR compliance. The work falls under NAICS code 332311 and is managed under the Department of Defense. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Helical Compression Spring SupplyThis subcontract with the DLA Weapons Support Land Supply Chain involves the manufacture and delivery of 38 helical compression springs. The contractor is responsible for ensuring all hardware meets strict technical specifications, including the prohibition of mercury and ozone-depleting chemicals. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. The agreement emphasizes rigorous compliance and security, requiring supply chain traceability per DLAD Procurement Notes C03 and adherence to DFARS cybersecurity standards. Performance will take place in Phoenix, Arizona, and the final delivery must include comprehensive traceability documentation to satisfy Department of Defense requirements.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Poppet Hull Drain Valve AssembliesThis subcontract involves the manufacture and supply of 13 poppet hull drain valve assemblies for prime contractors under DLA Weapons Support supply contracts. The fabrication must strictly follow part numbers Willard Marine 58367 P/N 12367 or P/N K12367, utilizing precision machining equipment to meet all specifications. The contractor must adhere to the DLA Master List of Technical and Quality Requirements and comply with NAVSEA 5100-003D mercury restrictions. Additionally, the provider is required to maintain DFARS 252.204-7012 cybersecurity compliance. Performance of the contract will take place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Metal Tube Assembly ManufacturingThis subcontract involves the fabrication of 23 metal tube assemblies for the DLA Weapons Support Fluid Handling Division under the Department of Defense. The scope of work includes precision bending, cutting, and assembly performed in accordance with Basic Drawing NR 56161 10667209 Rev A and Reference Drawing NR 56161 10553090 Rev D to produce components identified by NSN 4710200042085. The project is categorized under NAICS code 332311 and will be performed in Albany. Due to the handling of covered defense information, the contractor must maintain NIST SP 800-171 compliance and complete a CMMC Level 2 self-assessment. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Vehicular Seat Frame Fabrication and SupplyThis subcontract involves the fabrication and supply of seven completed vehicular seat frames for prime contractors supporting Department of Defense projects. The work is managed by the DLA Weapons Support LSO Combat Vehicles and Armament and must be performed in Texarkana, Texas. The manufacturer is required to possess metal fabrication equipment capable of executing specific Technical Data Packages, specifically adhering to TDP Rev C Gen 3 and reference drawings 19207 10866331 and 19207 10866352. All deliverables must be packaged and marked in strict accordance with MIL-STD-129 and ASTM D3951 standards. The opportunity was posted on November 6, 2026, with a response deadline of November 16, 2026. The project falls under NAICS code 332311 for plate work fabrication.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Globe Valve Parts Kit SupplyThis subcontract with the Department of Defense DDSP New Cumberland Facility requires the supply and assembly of 133 Globe Valve parts kits under NSN 4810-01-510-1903. The contractor is responsible for sourcing or fabricating all necessary components, aggregating them into kits, and providing comprehensive assembly instructions and packing lists. All deliverables must adhere to Critical Application Item quality specifications to support prime contractors fulfilling DLA supply contracts. Operational compliance is mandatory, with all containers marked according to MIL-STD 129 and hazardous materials managed in accordance with 29 CFR 1910.1200. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 332311. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Master Link Component SupplierThis subcontract involves the manufacture or sourcing of Master Link hardware components for prime contractors supporting DLA Weapons Support Land Supplier Operations. The supplier is responsible for providing 10 units of the specific component identified by NSN 2530015814204, ensuring all items are of domestic origin and strictly adhere to the technical data specifications and folders available via the DLA portal. Delivery is designated as FOB Destination Other. The opportunity is a Total Small Business Set-Aside under NAICS code 332311 for the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, to fulfill the requirements of the DLA Weapons Support Land Supplier Opns Vehicle Spt agency.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Helical Compression Spring SupplyThis subcontract involves the manufacture or procurement of 248 helical compression springs, identified by NSN 5360999115629, to support prime contractors under DLA Weapons Support Land Supply Chain contracts. The selected provider is responsible for ensuring all items are packaged according to ASTM D3951 standards and marked in compliance with MIL-STD-129. The contract requires the delivery of the full quantity of 248 units on an FOB Origin basis within a performance window of 168 days. Operations are associated with NAICS code 332311, with the place of performance located in Greensboro, North Carolina.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing and Supply of Cross Leveling Assembly (NSN 1015015625915)This subcontract involves the manufacturing and supply of three Cross Leveling Assemblies (NSN 1015015625915) for prime contractors working on Defense Logistics Agency projects. The contractor is responsible for the fabrication and assembly of units that adhere to the DLA Master List of Technical and Quality Requirements (RA001), with the option to use additive manufacturing provided it is approved by the Engineering Support Activity. All components must be packaged according to Special Packaging Instruction SPI 13015900 and delivered FOB Origin. The project is managed by the DLA Weapons Support Land Supply Chain under the Department of Defense and is designated as a Total Small Business Set-Aside. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, regarding this requirement categorized under NAICS code 332311.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Fluid Valve Stem SupplierThis subcontract involves the supply of 3,000 specialized valve stems to prime contractors supporting the Department of Defense through the DDSP New Cumberland Facility. The components must meet the strict specifications for NSN 4820016194525 and be compatible with 2.5 inch and 3 inch Globe Stop Cartridge Valves. All deliverables must adhere to CUNICO Corporation part numbers 8G7-04/005 and DCL-1400-DN-CVN-AXXX-08, while remaining in full compliance with the DLA Master List of Technical and Quality Requirements. The procurement falls under NAICS code 332311 and is managed by the Defense Logistics Agency. The place of performance is designated as New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 16, 2026, to ensure all technical and quality standards are met for the delivery of these critical fluid valve components.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Fabrication of Accessories Stowage BoxesThis subcontract involves the fabrication of three accessories stowage boxes for the Department of Defense, specifically supporting DLA Weapons Support LSO Combat Vehicles and Armament projects. The manufacturer must produce the boxes according to NSN 2540-01-522-6489 and P/N 0630-182446-DS using standard metal fabrication processes. All work must strictly adhere to the DLA Master List technical and quality requirements under RA001 and comply with Buy American mandates, with a specific prohibition against the use of additive manufacturing. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332311. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, to be considered for this procurement.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 8 days

AI Contract Overview

The USDA Animal and Plant Health Inspection Service (APHIS) is seeking a total small business set-aside contract for the procurement, modification, delivery, and installation of one new 40ft x 8ft high-cube steel shipping container for the Wildlife Services Guam Program in Barrigada, Guam. The project requires the container to be installed on an existing concrete pad, which may require minor refurbishing, and secured with typhoon-rated tie-down anchoring. The exterior must feature corrosion-resistant paint, a silicone roof coating, two aluminum outward-opening doors, and three windows equipped with accordion-style typhoon shutters. The interior must be divided into two rooms of approximately 55% and 45% size, separated by an insulated wall with an interior door. Specifications include R-13 or greater insulation in the walls and ceiling, drywall finishing, vinyl or laminate flooring, and a ceiling height of approximately 96 inches. Electrical requirements include a 100-amp panel box, twelve outlets, four LED or fluorescent lighting fixtures, and two 12,000 BTU minimum split A/C units. The vendor is responsible for the internal electrical readiness and the final connection to the site's 220v and 120v systems. This acquisition is conducted under simplified procedures for commercial products and services, with requests for the solicitation due by September 17, 2026.

General Info

USDA APHIS seeks a small business to provide a modified shipping container in Guam.

Agency

Department Of Agriculture → Mrpbs Minneapolis Mn

NAICS

332311 - Prefabricated Metal Building and Component Manufacturing

Place of Performance

Barrigada, GU, USA

Set-Aside

SBA

Documents

7 pages · q-and-a

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedSep 10

Presolicitation

Notice updatedSep 15

The notice description changed.

Response DeadlineSep 17

Deadline has passed

Submission Closed

09/17/2026, 03:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Agriculture → Mrpbs Minneapolis Mn

Contacts1 person available

OfficeMINNEAPOLIS, MN, 55401, USA

Organization / AgencyDepartment Of Agriculture → Mrpbs Minneapolis Mn

Office AddressMINNEAPOLIS, MN, 55401, USA

Contacts

Jeanine Goral

contact@example.gov

+1 (555) 000-0000

Full Description

September 15, 2026 - Modified solicitation to add Questions/Answers with Photos of site location.

This is a presolicitation notice issued in accordance with FAR Overhaul subpart 5.101, Presolicitation.

(1) Point of contact:

Jeanine Goral, Contracting Officer

USDA Animal and Plant Health Inspection Service (APHIS)

Email: contact@example.gov

Telephonic inquiries will not be honored.

(2) Set-asides: Total small business set-aside

(3) Codes for services or supplies:

PSC: 8145 - Specialized shipping and storage containers

NAICS: 332311 - Prefabricated metal and component mfg.

(4) Description:

Quantity of One (1) Modified 40ft x 8ft shipping container Name Brand (Conex) or Equal to be delivered to the USDA, APHIS, Wildlife Services Guam Program and installed on a concrete pad with electrical hookup at the WS state office on Guam.

Specifications required:

40ft HC Steel New-Container (Modified)

New 40ft shipping container
Preparation of delivery site/pad for Conex
Concrete pad is in place, but may need refurbishing
Typhoon-rated tie-down strapping/anchoring with installation
All exterior surfaces painted and finished with exterior paint formulated to reduce corrosion
Silicone roof coating
Three (3) 3' x 3' windows with accordion-style typhoon shutters
Two windows in room one, one window in room two
Two (2) aluminum exterior doors
Installed to open outward
One entry to room one, one entry to room two

Interior sectioning and finishing of container

Interior divided into two rooms, separated by a finished and insulated wall w/ interior door
Interior door opens so door swings into room one
Rooms should be nearly equal in size, with room one slightly larger to accommodate swing of interior door (roughly 55% room one, 45% room two)
All interior walls insulated and finished with drywall
Spray foam, fiberglass, or rigid board insulation (R-13 or greater)
Vinyl or laminate flooring
Ceiling insulated and finished with drop ceiling tiles, or drywall
Interior height, floor to ceiling, should be 96 inches (± 1 in)
Spray foam or rigid board insulation (R-13 or greater)
Interior painted and finished

Electrical requirements

Container electrical hooked up to WS Guam state office electrical system via hookup located on concrete pad at site.
Exterior junction box
220v hookup for A/C’s, & Appliances
120v electrical hookup to interior 100-amp panel box in room two
Two (2) A/C split units, one in each room
12,000 BTU minimum
A/C disconnect for each unit
Twelve (12) electrical outlets
Six (6) outlets per room
Four (4) overhead dome or strip lighting fixtures (LED or fluorescent) 40ft HC Steel New-Container (Modified)

• New 40ft shipping container

• Preparation of delivery site/pad for Conex (Figure 2)

o Concrete pad is in place, but may need refurbishing

• Typhoon-rated tie-down strapping/anchoring with installation

• All exterior surfaces painted and finished with exterior paint formulated to reduce corrosion

• Silicone roof coating

• Three (3) 3' x 3' windows with accordion-style typhoon shutters

o Two windows in room one, one window in room two

• Two (2) aluminum exterior doors

o Installed to open outward

o One entry to room one, one entry to room two

Interior sectioning and finishing of container

• Interior divided into two rooms, separated by a finished and insulated wall w/ interior door

o Interior door opens so door swings into room one

o Rooms should be nearly equal in size, with room one slightly larger to accommodate swing of interior door (roughly 55% room one, 45% room two)

• All interior walls insulated and finished with drywall

o Spray foam, fiberglass, or rigid board insulation (R-13 or greater)

• Vinyl or laminate flooring

• Ceiling insulated and finished with drop ceiling tiles, or drywall

o Interior height, floor to ceiling, should be 96 inches (± 1 in)

o Spray foam or rigid board insulation (R-13 or greater)

• Interior painted and finished

Electrical requirements

• Container electrical hooked up to WS Guam state office electrical system via hookup located on concrete pad at site.

• Exterior junction box

• 220v hookup for A/C’s, & Appliances

• 120v electrical hookup to interior 100-amp panel box in room two

• Two (2) A/C split units, one in each room

o 12,000 BTU minimum

o A/C disconnect for each unit

• Twelve (12) electrical outlets

o Six (6) outlets per room

• Four (4) overhead dome or strip lighting fixtures (LED or fluorescent)

(i) Above is the is the Statement of Work, provided to help prospective quoters make an informed business decision about requesting a copy of the solicitation directly from the Contracting Officer. Requests must be submitted no later than September 17, 2026 at 10:00 am CST. Quotes will be solicited directly from suppliers in accordance with FAR Overhaul subpart 12.201-1(c)(2)

(ii). This acquisition will be conducted using simplified procedures for commercial products and commercial services in accordance with Revolutionary FAR Overhaul (RFO) Part 12. Award will be made to the responsible vendor that best satisfies the Evaluation Criteria of this presolicitation.

(iii) All responsible sources may submit a quotation, which will be considered by the agency.