Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Modular Radio Communications Shelter Design and Fabrication

Active

State & Local

Response Deadline08/05/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the design, engineering, and fabrication of a modular radio communications shelter that must be engineered for complete disassembly, efficient palletization, and secure shipping to enable field assembly by Utah National Guard personnel without any vendor support. The shelter must be constructed using standardized components and clear, self-explanatory assembly instructions to ensure operational readiness in austere environments where technical assistance is unavailable. All materials, fasteners, and structural elements must withstand harsh field conditions while maintaining signal integrity and environmental protection for critical communication equipment. The project is classified as a subcontract under NAICS code 332311 and is open for responses until August 5, 2026, with a submission deadline of 9:00 PM local time. The performance location is unspecified but will require the final assembled shelter to be deployed in Utah’s operational areas. The Utah agency, acting through its designated procurement channel, seeks a solution that prioritizes ruggedness, modularity, and ease of field assembly over convenience or cost savings. Bidders must demonstrate experience in military-grade enclosure design and logistics planning for remote deployment, ensuring that every component can be handled by non-specialist personnel using basic tools and following documented procedures.

General Info

Design, fabricate rugged modular radio shelter for Utah National Guard field assembly without vendor support.

Agency

UtahView Agency

NAICS

332311 - Prefabricated Metal Building and Component ManufacturingView NAICS

Place of Performance

UT, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 09:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyUtah

ContactsNo contacts available

OfficeN/A

Organization / Agency

Utah

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design, engineering, and fabrication of a modular radio communications shelter that must be disassembled, palletized, and shipped for field assembly by UCA personnel without vendor support.

Similar Contracts

Same NAICS industry code

8145--Climate Controlled Storage Conex - Boise VA Medical Center Brand Name or Equal

Solicitation # 36C26026Q0896

The Department of Veterans Affairs, through the NCO20 office, is conducting market research to determine the availability of qualified small businesses, including Service-Disabled Veteran Owned, Veteran Owned, Women Owned, and other Small Business Manufacturers, as well as large businesses, capable of supplying a single 20ft climate-controlled storage container under a firm-fixed price supply contract. The requirement is for a brand name or equal product, specifically a new, one-trip Corten steel container with exact dimensions of 20ft long by 8ft wide and a height no greater than 10ft, featuring heavy-duty neutral exterior paint with a minimum five-year service life, marine-grade wood flooring with forklift tracks, interior LED lighting, GFCI outlets on each interior wall, and 1-inch styrofoam insulation on walls plus two layers on the ceiling. The unit must include a 15,000 BTU PTAC HVAC system with an energy efficiency ratio of 9.5 or higher, a digital thermostat, and a minimum 60A disconnect feeding a 125A interior electrical panel. The container must have a secure steel cargo door on the end opposite the main access door and must be under four years old with no damage. The SBA Non-Manufacturer Rule applies, and no waiver will be sought, meaning only authorized distributors or resellers of the manufacturer can respond if they do not manufacture the product themselves. All items must be new, with no used or refurbished equipment accepted, and the manufacturer must be Falcon Structures unless an equal product is submitted. Responses must include full company details, UEI, SBA certifications if applicable, proof of authorization from the manufacturer if not the producer, a courtesy quote for price reasonableness, and detailed documentation demonstrating that any “equal” product meets or exceeds every specified salient characteristic, including brand name, model number, and supporting literature. The country of origin for all components must be declared, and if the product is foreign-made, respondents must indicate whether it exceeds 60% domestic content, though this is waived for COTS items. Respondents must also identify all manufacturers involved and, if they qualify as a nonmanufacturer under SBA regulations, provide a narrative confirming they meet the criteria of having fewer than 500 employees, primarily engaging in wholesale or retail, taking ownership of the item, and supplying a U.S.-made end product from a small business manufacturer. Participation is voluntary, with no reimbursement for response costs, and submission does not

260-NETWORK Contract Office 20 (36C260)

POSTED

about 11 hours ago

DEADLINE

GJ27-8 UCA Birch Creek Modular Radio Communications Shelter

Solicitation # GJ27-8

The Utah Communications Authority is seeking proposals for the GJ27-8 solicitation titled GJ27-8 UCA Birch Creek Modular Radio Communications Shelter, with questions due by August 2 2026 at 3 PM Mountain Time and responses due by August 5 2026 at 3 PM Mountain Time, both submitted through the U3P platform. Submissions are subject to a strict 1GB file size limit per upload, and vendors must ensure full compliance with all requirements outlined in the official solicitation document, as this procurement is managed solely by the Utah Communications Authority and not by the Division of Purchasing. The contract award will not be published on the public posting site and vendors must contact the designated office directly for award information. The solicitation will be closed upon the deadline but responses will still be evaluated according to the criteria specified in the document. The place of performance is in Utah, and vendors are responsible for reviewing all terms, conditions, and procedures independently to ensure timely and accurate submission.

POSTED

about 23 hours ago

DEADLINE

Material and Equipment Supply (General)The contract is for the supply of certified construction materials and equipment, including structural steel, roofing, and specialty finishes, as outlined in the project specifications. It is structured as a subcontract with a North American Industry Classification System code of 332311, indicating involvement in metal fabrication for building construction. The opportunity was posted on July 28, 2026, and responses are due by September 10, 2026, at 6:00 PM. The Utah agency is managing the solicitation, though specific location details for performance or contact information are not provided. All materials must meet certified standards required for the construction scope, and bidders are expected to comply with all technical and quality assurance stipulations without explicit set-aside provisions outlined.

POSTED

DEADLINE

in about 1 month

Modular Storage Cover Manufacturing & SupplyThe contract calls for the fabrication and delivery of eight modular storage covers engineered to meet rigorous military specifications, ensuring durability, environmental protection, and operational readiness in demanding field conditions. Each unit must comply with all federal logistics standards, including precise packaging requirements to safeguard integrity during transport and storage, and undergo comprehensive quality assurance protocols to verify conformance to technical and performance benchmarks. The work is subject to strict military-grade oversight and must be completed in alignment with the Department of Defense’s logistical and compliance frameworks. Performance is required at Fort Bragg, North Carolina, with all units to be delivered and accepted at this location. The contract is classified as a subcontract under NAICS code 332311, indicating it pertains to metal manufacturing processes relevant to structural components. The solicitation was posted on July 28, 2026, with proposals due by August 10, 2026, and is managed through the Department of Defense’s Defense Logistics Agency procurement system, ensuring adherence to federal acquisition standards and defense supply chain protocols.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Manufacture of Vehicle Loading Ramp (MIL-SPEC)The contract calls for the fabrication of one military-specification vehicle loading ramp identified by NSN 3990-01-588-6701, encompassing all aspects of production from engineering design through final finishing, with strict adherence to military technical standards. The scope includes material sourcing, precision welding, and quality control to ensure full compliance with defense requirements, and the ramp must meet the durability, safety, and performance benchmarks mandated for military use. The solicitation, issued under the NAICS code 332311 for Fabricated Metal Product Manufacturing, is structured as a subcontract with a response deadline of August 10, 2026. The place of performance is designated as Tracy, California, with a ZIP code of 95304-5000, indicating where the ramp must be manufactured and potentially tested. The contracting entity is the Department of Defense under the organization title Construction & Equipment Manu & Con, and the opportunity is publicly accessible via the DIBBS system with the referenced UI link. All work must be completed by the stated deadline to be considered for award.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Galvanized Structural Components SupplyThe contract involves the supply of hot-dip galvanized steel components specifically designed for trailer frames and structural elements intended to withstand the corrosive conditions of marine environments. The components must meet stringent corrosion resistance standards to ensure long-term durability and structural integrity under harsh coastal or offshore operating conditions. The solicitation is classified as a subcontract under a total small business set-aside, meaning only small businesses as defined by the SBA are eligible to respond, aligning with FAR 19.5 guidelines. The North American Industry Classification System code 332311 identifies the primary industry as primary metal product manufacturing, indicating the work requires specialized metal fabrication and coating expertise. The contract was posted on July 28, 2026, with a response deadline of August 6, 2026, at 3:00 PM. The acquiring agency is the Office of Acquisition Grants under the Department of the Interior, though specific location details for performance or contact are not provided. All submissions must comply with federal contracting requirements and demonstrate technical capability to deliver galvanized steel components meeting the specified environmental performance criteria. Participation is restricted to small business concerns, and vendors must be registered and active in SAM.gov to be considered for award.

Office Of Acquisiton Grants

POSTED

DEADLINE

Rack-Mounted Enclosure Design and Vibration IsolationThe contract requires the design and fabrication of a specialized 19-inch rack-mounted drawer enclosure to house an optical assembly with stringent engineering demands. The enclosure must incorporate vibration isolation to protect sensitive optical components from mechanical disturbances, and integrated thermal management systems to maintain stable operating temperatures under varied environmental conditions. Precise dimensional compliance is mandatory to ensure seamless integration with existing rack infrastructure and compatibility with surrounding hardware. The project is classified as a subcontract under NAICS code 332311 and is being pursued by the National Institute of Standards and Technology under the Department of Commerce. Performance of the work is required in Boulder, Colorado, with a delivery deadline of August 7, 2026, and all proposals must be submitted by 5:00 PM Mountain Time on that date. The solicitation is open for competitive bidding with no set-aside provisions specified.

Department Of Commerce Nist

POSTED

DEADLINE

Solicitation # FA875126Q0902

This is a firm fixed price Request for Quotation (RFQ) issued under FAR Part 12 as a total small business set-aside for NAICS code 332311, with a size standard of 750 employees, for the procurement of a relocatable guard booth to be delivered to the Air Force Research Laboratory in Rome, New York. The acquisition is funded and requires offerors to submit detailed technical descriptions and engineering drawings of the proposed guard booth, along with all required certifications and representations. The delivery must occur prior to winter conditions, with a targeted completion date of October 1, 2026, and all shipments must comply with FOB Destination terms at the designated address, with acceptance occurring at the delivery point. The guard booth must meet specific structural, electrical, and environmental standards including steel construction, R28/R42 insulation, a 13,500 BTU roof-mounted air conditioning unit, a 3,000-watt wall heater, non-ballistic tinted windows, and a non-slip floor, with warranty coverage of one year for structural defects and 30 days for electrical and HVAC components. Any item with a unit price of $5,000 or more must be marked with a Unique Item Identifier (UII) using a two-dimensional Data Matrix symbology compliant with ISO/IEC 16022 ECC200, containing either the CAGE code and serial number or the CAGE code, serial number, and part/lot/batch number. Offerors must comply with numerous federal and defense regulatory requirements, including prohibitions on using covered telecommunications equipment, restrictions on procurement from the Xinjiang Uyghur Autonomous Region and the Maduro regime, adherence to Buy American and Balance of Payments Program requirements, and mandatory representation regarding compensation of former Department of Defense officials. The evaluation will be based equally on technical capability and price, with no discussions anticipated, requiring offerors to submit their most competitive and technically compliant proposal upfront. Payment will be processed electronically via the System for Award Management, and the contractor must be registered in SAM with an active Unique Entity ID and CAGE code. All submissions are due by 3:00 PM Eastern Time on August 5, 2026, and offerors are responsible for monitoring the solicitation site for any amendments. The contract includes clauses governing security, subcontracting, whistleblower rights, sustainable products, combating trafficking, equal opportunity, and accelerated payments to small business subcontractors

FA8751 Afrl Riko

POSTED

DEADLINE

Fabric Pre Engineered Building for TXDOT Lubbock

Solicitation # 601340000066857

The Texas Department of Transportation is soliciting proposals for the fabrication of a pre-engineered metal building to be located in Lubbock, Texas, under solicitation number 601340000066857. The opportunity was posted on July 27, 2026, with responses due by August 10, 2026, and no submissions will be accepted after the deadline. All updates, including addenda, questions, answers, or modifications, will be posted exclusively on the official website, and bidders are responsible for continuously monitoring the site for changes. The primary point of contact for inquiries is Amanda Davenport, reachable via phone or email at 903-283-0607. The building will be constructed at a site within Texas, with no specific city or zip code provided. There is no designated set-aside or NAICS code listed, and the procurement is open to all qualified respondents without restriction based on business size or category.

Texas Department Of Transportation

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3693

The contract specifies the procurement of a PANEL ASSEMBLY with part number 5-4-4657, consisting of two frame installations (P/N 5-4-3044-1) and one closeout panel assembly measuring 60.81 inches wide and 79.31 inches high, featuring two environmental control unit openings each 24.35 inches wide and high. The unit of issue is EA with a quantity of two, delivered FOB origin within 52 days, with zero variance allowed in quantity. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering to DLA Packaging Requirements, including palletization per RP001, and all labeling and traceability must reflect the specified U/I and QUP. Supply chain traceability is mandatory under DLA Directive C03, and only authorized sources with specified CAGE codes—Quality Aviation Inc. (62083) and Charlotte Aircraft Corporation (12609)—may supply components, with documentation retention required. The assembly incorporates components governed by Qualified Products Lists (QPL) or Qualified Manufacturers Lists (QML) under Procurement Note H02, and mercury or mercury-containing compounds are strictly prohibited unless exempted for specific functional applications with secondary containment per NAVSEA 5100-003D. Safety Data Sheets and Hazard Communication Standard labels compliant with 29 C.F.R. 1910.1200 must be submitted prior to award, and employee training on these requirements is mandated. Technical and quality requirements referenced by R and I numbers are sourced from the DLA Master List, with revision control tied to the solicitation or award date. All drawings referenced are available via DIBBS during open solicitation and must be followed for manufacturing. Delivery is directed to the DLA Distribution Facility in New Cumberland, PA, with a need ship date of September 29, 2026, and an original required delivery date of January 14, 2027. Inspection and acceptance occur at destination. The contract is a total small business set-aside under NAICS code 332311.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Material Cutting and Preparation ServicesThe contract seeks specialized material cutting and preparation services for stainless steel and bronze bars exceeding 20 feet in length, to be severed into nominal 12-foot segments in accordance with precise contractual specifications. The work is limited to industrial cutting operations and requires adherence to technical standards for material handling, dimensional accuracy, and safety protocols. All tasks must be performed at the designated place of performance in Portland, Oregon, with zip code 97210, ensuring timely delivery and compliance with quality expectations. This is a subcontract classified under NAICS code 332311 and structured as a Total Small Business Set-Aside under SBA guidelines, meaning only qualified small businesses may compete. The solicitation was posted on July 27, 2026, with responses due by 5:00 PM EST on July 31, 2026. The contracting activity falls under the Department of Defense, specifically the W071 Endist Portland office, and the work is intended to support defense-related logistics or production requirements. Prospective bidders must ensure full alignment with the set-aside status and demonstrate capability to execute the cutting operations under strict defense contract standards.

W071 Endist Portland

POSTED

DEADLINE

Climate Controlled Storage Buildings

Solicitation # W911S226U3832

The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is soliciting proposals for climate controlled storage buildings under contract number W911S226U3832, with a total small business set-aside designation as outlined in FAR 19.5. The opportunity is classified under NAICS code 332311 for metal fabrication and is open exclusively to small businesses. Proposals must be submitted by August 3, 2026, at 7:00 PM Eastern Time, with the solicitation posted on July 27, 2026. Performance will be required at a location with zip code 42223, though specific city and state details are not provided. The primary point of contact for inquiries is Henry Ingram, reachable via phone at 270-798-2649 or email at henry.l.ingram4.civ@army.mil. The contract is issued under a combined solicitation format, meaning it may include both competitive and non-competitive elements, and all responses must be submitted through the SAM.gov portal using the provided UI link.

W6QM Micc-Ft Drum

POSTED

DEADLINE

More opportunities from Utah

Same awarding agency

Packaging, Labeling, and LogisticsThe contract requires comprehensive packaging, protective wrapping, palletization, and labeling of disassembled shelter components for secure transport to North Salt Lake, UT. All activities must ensure the integrity of the materials during handling and transit, with precise labeling to facilitate accurate identification and unloading. Delivery coordination is a core component, necessitating timely scheduling and logistics management to meet specified arrival requirements. This subcontract falls under NAICS code 493190, indicating classification within other support activities for transportation, and is open for response until August 5, 2026. The opportunity is posted by the State of Utah through the BonfireHub platform, with no set-aside designations or detailed point of contact information provided.

Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

Technical Documentation and Assembly SupportThe contract titled Technical Documentation and Assembly Support requires the development of comprehensive technical materials to enable UCA personnel to independently assemble a shelter without any vendor assistance. This includes creating detailed installation instructions, clear assembly drawings, an accurate component inventory, and complete tool lists that cover every step and part necessary for successful assembly. The deliverables are designed to ensure operational autonomy for UCA teams by eliminating reliance on external technical support during setup. The solicitation is classified as a subcontract under NAICS code 541330 and is issued by the State of Utah. The posting date is July 28, 2026, with a response deadline of August 5, 2026. No set-aside designation is specified, and the place of performance and point of contact details are not provided. Interested parties must submit proposals through the Utah BonfireHub portal before the deadline to be considered for award.

Engineering Services

POSTED

about 23 hours ago

DEADLINE

Steel Skid Design and ManufacturingThe contract seeks the design and fabrication of a structural steel skid specifically engineered to support a modular shelter, ensuring it meets exacting load ratings and dimensional constraints necessary for safe transportation and reliable field deployment. The skid must be robustly constructed to withstand the rigors of transport and variable environmental conditions while maintaining structural integrity under anticipated operational loads. All design elements must align with industry standards for heavy-duty steel fabrication, with attention to weld integrity, material grade specifications, and compliance with transportation regulations for mobility and handling. Submission is open under a subcontract classification with a response deadline of August 5, 2026, and the opportunity is categorized under NAICS code 332439, indicating a focus on other structural metal product manufacturing. The contract is administered by the state of Utah, with no specific agency or office details provided beyond the organizational name. Interested parties must respond through the designated BonfireHub portal, and all proposals must demonstrate proven capability in structural steel fabrication, adherence to technical specifications, and readiness for timely execution. There is no set-aside designation indicated, meaning the contract is open to all qualified contractors regardless of size or business type.

Other Metal Container Manufacturing

POSTED

about 23 hours ago

DEADLINE

Safety and Hazard Management ServicesThe contract titled Safety and Hazard Management Services requires the implementation of comprehensive site safety protocols, including the conduct of thorough hazard assessments and ongoing enforcement of OSHA regulations alongside project-specific safety standards. The work is focused on ensuring full compliance with federal and local safety requirements to protect personnel and maintain operational integrity across all assigned sites. This subcontract is open for bidding with a response deadline of September 10, 2026, and falls under the NAICS code 541690 for other scientific and technical consulting services. The solicitation is issued by the state of Utah through its designated agency, with no specific location or point of contact provided, and the opportunity is accessible via the BonfireHub platform. The contract does not specify a set-aside type or organizational restrictions, leaving it open to qualified contractors regardless of size or ownership structure.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

in about 1 month

Site Inspection and Quality Assurance ServicesThe contract seeks qualified providers to deliver site inspection and quality assurance services for projects under the jurisdiction of the Utah agency, ensuring strict adherence to contract documents, applicable codes, and regulatory requirements. Inspectors will work in close coordination with the Design and Facility Construction Management team and the Architect/Engineer to verify compliance at all stages of construction, identifying deficiencies and documenting corrective actions to maintain project integrity and safety standards. The opportunity is classified as a subcontract under NAICS code 541330, and responses must be submitted by September 10, 2026, with the solicitation posted on July 28, 2026. Performance is expected to occur within the State of Utah, though specific location details are not provided. The contract does not indicate a set-aside designation or designated point of contact, and interested parties should refer to the official Bonfire link for submission guidelines and additional requirements.

Engineering Services

POSTED

DEADLINE

in about 1 month

Electrical Systems InstallationThe contract titled Electrical Systems Installation seeks a subcontractor to provide comprehensive installation of power, lighting, controls, and low-voltage systems necessary for the proper operation and inspection of a facility. The work encompasses all electrical infrastructure required to support functionality and compliance, including wiring, circuitry, switching, monitoring systems, and integrated control networks. The solicitation is open for responses until September 10, 2026, with a posting date of July 28, 2026, and is classified under NAICS code 238210 for electrical contractors. While the specific location of performance is not detailed, the contracting entity is the state of Utah, and the opportunity is accessible through the Utah Bonfire Hub platform. No set-aside status or additional organizational details are provided, indicating the contract is open to general qualified subcontractors without specific socioeconomic preferences.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Mechanical Systems InstallationThe contract involves the installation of HVAC, plumbing, and process piping systems in accordance with approved project drawings and all applicable codes and standards. The work is classified under NAICS code 238220 and is structured as a subcontract, indicating it is part of a larger construction or facility project managed by a prime contractor. The opportunity was posted on July 28, 2026, with a response deadline set for September 10, 2026, giving potential bidders approximately six weeks to prepare and submit their proposals. The contracting entity is the State of Utah, though specific location details for the place of performance are not provided, suggesting the work may occur at one or more sites within the state. All installations must comply with current regulatory requirements and technical specifications to ensure system functionality, safety, and code adherence.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Concrete Supply and PlacementThe contract titled Concrete Supply and Placement requires the full scope of concrete work for structural and site improvements, encompassing formwork construction, concrete pouring, proper curing methods, and final finishing to meet specified standards. All work must be completed in accordance with industry best practices and project requirements, ensuring durability and safety for both structural elements and site features. The subcontract is open for bidding with a response deadline of September 10, 2026, and is classified under NAICS code 238110, indicating it aligns with concrete work services. The opportunity is managed by the state of Utah, with performance expected to take place within its jurisdiction, though specific location details are not provided. Bidders must be prepared to handle all logistics, materials, labor, and equipment necessary to deliver the required concrete services without reliance on additional contractual support.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

in about 1 month

General Construction ManagementThe contract titled General Construction Management involves comprehensive oversight of all construction activities, including scheduling, coordination with subcontractors, ensuring regulatory compliance, and delivering accurate as-built documentation. The role requires active management throughout the project lifecycle to maintain timelines, quality standards, and adherence to applicable codes and protocols. This is a subcontract opportunity under NAICS code 236220, indicating classification within nonresidential building construction, and is being solicited by the state of Utah under its agency name. The opportunity was posted on July 28, 2026, with a firm response deadline of September 10, 2026, at 6:00 PM. The place of performance and specific office address details are not provided, but the solicitation is accessible through the Utah BonfireHub portal for further inquiry and submission.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month

DFCM Construction - VBS Construction Stage II - Invitation to Interview - Department of Veterans and Military Affairs - William E. Christofferson Salt Lake Veterans Home - 23383490

Solicitation # DA26055-Stage II

This solicitation is Stage II of a two-phase selection process for the construction of a 105-bed skilled nursing facility in West Valley City, Utah, to be managed by the Utah Department of Veterans and Military Affairs. Only contractors who were shortlisted during Stage I, the Request for Proposals, are eligible to participate in this stage, which requires them to attend an interview and submit detailed cost proposals. The project has an estimated construction cost of seventy-three million dollars, and performance must occur at the designated work site, with all labor, materials, and services delivered as directed by the Division of Facilities Construction and Management (DFCM). Submission of proposals is due by September 10, 2026, and must be delivered via registered mail or email, with no online portal specified. While no formal solicitation number is provided, the reference number DA26055-Stage II is used internally. The award basis, evaluation factors, and specific technical criteria are not outlined in the available documentation, and no federal FAR clauses are applicable—instead, the contract follows state-level provisions with internal clause numbering such as Section 11.5 and 11.6, which mandate non-discrimination, compliance with applicable laws, and adherence to ethical standards. The contractor is responsible for all aspects of construction including adherence to approved contract documents, drawings, specifications, and amendments, and must comply with local and state regulations. Deliverables include timely submittals of shop drawings, product data, samples, as-built documentation, and compliance with a detailed Critical Path Method schedule to achieve Substantial Completion within the Contract Time. Inspection and acceptance occur at the project site and are conducted jointly by DFCM, the Contractor, and the Architect/Engineer, with the Contractor bearing all costs for re-inspections and corrections. The contract requires performance and payment bonds, mandatory insurance coverage, lien waivers, and affidavits of paid payrolls and bills as conditions of payment. A one-year warranty on materials and workmanship is stipulated, along with indemnification clauses to protect the state from claims arising from the Contractor’s operations. Subcontractors must be pre-approved and disclosed prior to award, with exceptions permitted under specified conditions. No information on FOB terms, specific accounting codes, electronic invoicing systems, COR/COTR contacts, or packaging and marking standards is included. The contract also imposes no requirement for Unique Entity ID, CAGE code, or socioeconomic certifications, and does not include options, key personnel designations, or security clearance

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month