Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Monitoring Hardware Supply (Sensors, Gateways, Network Cards)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of sensors, ProtoNode gateways, and Cummins network cards to establish data connectivity for approximately 40 older generators that lack built-in monitoring systems. These components will enable real-time data acquisition and remote monitoring capabilities, allowing for improved operational oversight, predictive maintenance, and reliability monitoring of the generator fleet. The hardware must be compatible with existing infrastructure and capable of reliably transmitting performance and diagnostic data without requiring major modifications to the generators themselves. The solicitation is issued as a subcontract under the Department of Defense, managed by FA4418 628 Cons Pk, with performance required at Charleston AFB, South Carolina, zip code 29404. The NAICS code 334511 indicates the focus on communication equipment manufacturing, aligning with the technical nature of the components being sourced. The contract was posted on July 12, 2026, with responses due by July 27, 2026, at 6:00 PM, providing a two-week window for qualified vendors to submit proposals. No set-aside designation or specific organization type is specified, leaving the opportunity open to eligible subcontractors with the technical capability to deliver the specified hardware.

General Info

Supply sensors, gateways, and network cards for 40 generators to enable real-time remote monitoring at Charleston AFB.

Agency

Department Of Defense → FA4418 628 Cons PkView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Charleston AFB, SC, 29404, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA4418 628 Cons Pk
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FA4418 628 Cons Pk
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of sensors, ProtoNode gateways, and Cummins network cards to enable data connectivity for ~40 older generators lacking native monitoring capability.

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
TRANSMITTER, POSITIOThe contract pertains to the procurement of a transmitter, position, identified by NSN 6610014650790 and part number 510000-2, with a quantity of five units to be delivered within 90 days from the contract date, FOB origin, and inspected and accepted at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and take precedence over other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001, with unit packaging and palletization strictly adhering to DLA specifications. Sampling for quality verification follows MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances unless otherwise specified. The item is classified as a critical application item and is subject to CMMC Level 2 Self-Assessment requirements. Delivery is mandated to the DLA Distribution Depot in Tinker Air Force Base, Oklahoma, with an original required delivery date of August 15, 2025, and a needed ship date of September 19, 2025. The contract includes no quantity variance, and transportation logistics are governed by DLAD procedures. The solicitation is issued under SPE4A6-26-T-05FT, with point of contact Alexis Dunnavant, and pertains to a federal procurement under NAICS code 334511.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334511
New
DIBBS
REPAIR KIT, NAVIGATIThis contract is for a repair kit for navigational instruments identified by NSN 6605-01-597-8773, with a quantity of 66 units to be delivered within 110 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The kit must comply with stringent packaging and preservation standards per MIL-STD-2073-1E, Appendix D, requiring all components to be assembled into a single box with adequate cushioning to prevent damage and movement, accompanied by a detailed contents list including part numbers, NSNs, and quantities. Packaging and marking must adhere to MIL-STD-129, including barcoding and the specified special marking code of 00-00, with no additional special markings required. The kit is designated as a Critical Application Item and must be identified with specific part numbers from CPI SATCOM & Antenna Technologies Inc. and Rockwell Collins, Inc. Inspection and acceptance occur at the destination point, with zero tolerance for non-conformances under sampling standards such as MIL-STD-1916 or ASQ H1331, and all attributes not otherwise specified are treated as major. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date. Unit of issue is each (EA), delivered FOB origin with no variance allowed in quantity. Hazardous materials shipping followsParcel Post Address guidelines, and transportation logistics are governed by DLAD procedural notes. The contract was solicited under SPE4A5-26-T-283P, with a response deadline of July 22, 2026, and a required delivery date of July 18, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334511
New
DIBBS
COUNTER, ROTATINGThe contract specifies the procurement of a COUNTER, ROTATING with NSN 6680-00-445-5499 and part number 42906, under solicitation SPE4A5-26-T-283L, with a required delivery of 53 units within 144 days from the contract award. The item is designated as a critical application component and must be packaged and labeled as a "Delicate Instrument" in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including special marking code 05. All packaging must adhere to DLA’s overarching packaging requirements, and palletization must conform to RP001 standards. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under the specified sampling plan, which follows MIL-STD-1916 or ASQ H1331 Table 1, and requires zero defects unless otherwise stipulated. The item is subject to DLA’s technical and quality requirements referenced in the DLA Master List, and cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment. Shipping must be handled with care, as defined by the "Delicate Instrument" designation, and delivery is FOB origin to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The contract enforces a strict quantity variance of plus or minus zero percent, with the original required delivery date set for November 26, 2027 and a needed ship date of December 9, 2026. Unit of issue is each (EA), and the procurement is governed by DoD authorized procedures, including transportation instructions outlined in DLAD PROC NOTES C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334511
New
DIBBS
CONVERTER GROUP, SIGNALThis contract, issued under solicitation SPE4A7-26-T-563S by the Department of Defense through the ASC Supplier Oper AE and AF Division, pertains to the procurement of five units of the Signamax Connectivity Systems AESP 4MAZ0, part number 065-1100LFS, identified by NSN 5895015868165. The item is classified as a commercial off-the-shelf (COTS) product and is subject to stringent packaging and handling requirements mandated by DLA and military standards. Delivery is due within 169 days from the contract award, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination warehouse in Tracy, California. The contract enforces compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including a special ESD marking code 39 indicating the item is an electrostatic discharge-sensitive electronic device. The supplier must ensure all packaging meets DLA’s ESD and EMI protection standards as defined by MIL-PRF-81705, requiring Type I and Type III barrier materials with documentation verifying all materials originate from qualified manufacturers on QPL-81705. Additional requirements include shockproof containment for any mercury-containing components, with exceptions only for specified functional uses approved by NAVSEA. Preservation methods and cushioning must prevent physical damage to leads and terminals, and all packaging must be handled at approved ESD/EMI protective workstations. The contract incorporates technical and quality requirements referenced in the DLA Master List, with compliance determined by the revision in effect on the solicitation issue date. The delivery address and shipping instructions are explicitly defined, with a required ship date of January 3, 2027, and an original delivery deadline of November 30, 2026. All documentation, compliance data, and packaging materials must be verified and submitted by the supplier, who bears full responsibility for adherence to these technical, environmental, and logistical mandates.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → FA4418 628 Cons Pk

Same awarding agency

NAICS: 488119
New
Federal
FA441826Q0073 Joint Base Charleston (Air Base) Runway Friction Testing ServicesThis solicitation, FA441826Q0073, issued by the Department of Defense for Joint Base Charleston, seeks commercial services for runway friction testing under a Total Small Business Set-Aside, with NAICS code 488119. The contractor must perform recurring friction inspections on four runways at Joint Base Charleston and the North Auxiliary Airfield using Continuous Friction Measuring Equipment (CFME), conducting tests at both 40 mph and 60 mph in both directions, adhering to FAA AC 150/5320-12, UFC 3-260-01, UFC 3-270-01, and AFI 13-213 standards. The base period runs from October 1, 2026, to September 30, 2027, with four one-year option periods potentially extending the contract through September 30, 2031. The contract is structured as a Firm Fixed Price arrangement with line items for runway friction testing and mobilization, each with specified quantities; a recent amendment increased the quantity for CLINs 0001, 1001, 2001, 3001, and 4001 from eighteen to twenty each, while all other terms remain unchanged. Performance is required at the base location, with all personnel, equipment, labor, travel, and safety measures supplied by the contractor, and access to controlled areas requires proper identification, vehicle passes, and insurance certification. The contractor must provide a completed FA441826Q0073 FY 27 Runway Friction Testing Service Price List (2026) as Attachment 01 for consideration, and prices must remain firm for sixty days after the offer deadline. All submissions must comply with FAR 52.212-1, FAR 52.212-2, and FAR 52.232-18, and include required representations, certifications, and SAM registration, with electronic invoicing via WAWF using the Invoice 2in1 format and payment processed through DoDAAC F87700. Evaluation follows a sequential process: technical compliance is a mandatory pass/fail gate, followed by consideration of the lowest-priced offeror for substantial performance confidence; if the lowest-priced offer fails to meet the threshold, an integrated best value evaluation is
Other Airport Operations

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 334515
New
Federal
JB Charleston Generator Monitoring SystemJoint Base Charleston is seeking manufacturers to supply and install a remote generator monitoring system across 65 generators located at four geographically separated sites within the base. The system will function as a data acquisition platform integrated into the existing Energy Management and Control System architecture to deliver real-time alerts for electrical and generator failures, replacing outdated manual inspection methods and significantly enhancing base resiliency and mission continuity through immediate situational awareness. The project includes identifying and connecting 18 generators already compatible with Monico integration, confirming compatibility for an additional 7 units requiring further discovery, and assessing up to 40 older Cummins generators that may lack the necessary Cummins network cards and ProtoNode gateways. The solicitation is open to qualified vendors, with responses due by July 27, 2026, and all interactions must be directed to the primary point of contact, Jeffrey Krieger, or secondary contact Roger Crews. The acquisition is being conducted under NAICS code 334515, and no set-aside provisions are in effect. While the full scope of deliverables, evaluation criteria, and contract terms are not detailed in the available documentation, the emphasis is on seamless integration, reliability, and rapid deployment to support critical infrastructure operations. The place of performance is Charleston AFB, South Carolina, and the contracting office is under the Department of Defense within the 628th Contracting Squadron.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

4 days ago

DEADLINE

in 9 days
View Details