Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on September 26, 2016. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

MOP Loading Adapter

Closed
MOP_Loading_AdapterFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332993
New
Federal
155mm Modular Artillery for Combat Effectiveness (MACE)
Solicitation # W15QKN26R1C5R
The 155mm Modular Artillery for Combat Effectiveness (MACE) program, managed by the U.S. Army Contracting Command – Rock Island at Picatinny, is a solicitation for up to two prototype Other Transaction Agreements (OTAs) under 10 U.S.C. § 4022. The objective is to develop a manufacturable 155mm cargo-carrying artillery projectile system designed to expand domestic manufacturing capacity and modular payload capabilities. The project is structured in two phases: Phase I focuses on projectiles achieving a range of 30 to 35 km, while Phase II targets ranges exceeding 35 km. The prototypes must be compatible with M777A2 Lightweight Towed and M109A7 Paladin 39-caliber weapon platforms, with future adaptability for 52 or 55 caliber systems. Successful prototype completion may lead to a follow-on production contract of up to 10,000 systems per year, supporting a Milestone C production decision by the fourth quarter of FY29. The procurement process involves rigorous technical and administrative requirements, including the submission of a detailed Integrated Master Schedule (IMS) and a cost proposal based on FAR cost principles. Evaluation for Phase I prioritizes the schedule, while Phase II emphasizes technical design and technology maturity. Offerors must certify their business status, specifically regarding nontraditional defense contractor eligibility, and comply with the Buy America Act and National Technology and Industrial Base restrictions. Access to controlled technical data, such as purchase descriptions and drawings, requires the submission of a Non-Disclosure Agreement and a Military Critical Technical Data Agreement. The final response deadline for proposals was extended to October 30, 2026, with submissions required via SAM.gov in specific stand-alone volumes.
W6QK Acc-Ri-Picatinny

POSTED

4 days ago

DEADLINE

in 10 days
NAICS: 332993
New
DIBBS
49--TEST STAND,TORPEDO,WAR
Solicitation # SPE7M4-27-T-1136
Solicitation SPE7M4-27-T-1136 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for 32 torpedo warshot test stands, identified by NSN 4921017264731. This procurement is a total small business set-aside under NAICS code 332993. Quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 23, 2026. The required delivery period is 164 days, with a need ship date of April 6, 2027, and an original required delivery date of October 15, 2027. Shipping is designated as FOB Origin, with the final delivery destination being the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 for general packaging, RP001 for palletization, and MIL-STD-129 for labeling. Inspection and acceptance will occur at the destination. Offerors must comply with domestic sourcing requirements, including the Buy American Act and the Berry Amendment, and must disclose any use of non-domestic materials. Additionally, the contract incorporates various federal and defense acquisition regulations regarding hazardous materials, cybersecurity, and the prohibition of certain foreign military company items. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

7 days ago

DEADLINE

in 3 days
NAICS: 332993
Federal
ARMY AMMUNITION MANUFACTURING INNOVATION INDUSTRIAL BASE INTEGRATION TEAM COMMERCIAL SOLUTIONS OPENING REQUEST FOR SOLUTIONS
Solicitation # AMIP-CSO
The Army Ammunition Manufacturing Innovation Industrial Base Integration Team is seeking innovative commercial solutions through a Commercial Solutions Opening to modernize ammunition manufacturing capabilities. The primary objective is to integrate advanced technologies such as additive manufacturing, robotics, artificial intelligence, and digital twins to enhance production throughput, supply chain resilience, and digital visibility across Army Ammunition Plants. These solutions must align with Department of Defense standards for cybersecurity, sustainability, and readiness to create a more agile and technologically advanced industrial base. Awards may be executed as fixed-price contracts or Other Transaction Agreements, with intended funding starting in Fiscal Year 2026 and typical periods of performance ranging from two to five years. The solicitation utilizes a phased submission process beginning with a Phase I white paper and PowerPoint briefing, including a quad chart, followed by a 60-minute pitch session. Finalists in Phase III must provide a detailed technical approach, a price proposal, and a statement of work not exceeding ten pages. Proposals are evaluated using a peer or scientific review process based on Return on Investment criteria, with equal weight given to technical merit, projected availability, funds availability, and private investment. Large business offerors are required to submit subcontracting plans detailing commitments to various small business categories. All Phase I submissions must be unclassified, and offerors are responsible for maintaining the necessary security clearances for any subsequent classified work.
W6QK Acc-Ri

POSTED

19 days ago

DEADLINE

in about 2 months
NAICS: 332993
Federal
13--RING,CLAMPING
Solicitation # N0010425QNC18
Solicitation N00104-25-Q-NC18 is a total small business set-aside for the procurement of three clamping rings (NSN 1350-01-671-1961) for the Department of Defense, specifically NAVSUP Weapon Systems Support. The requirement is issued under Emergency Acquisition Flexibilities and carries a DO priority rating for national defense. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. The resultant contract will be issued bilaterally, requiring written acceptance from the contractor. Technical requirements mandate that the items meet the specifications of drawing 6964634, cage 53711, and be physically identified per MIL-STD-130. The contractor must maintain an ISO 9001 quality system and adhere to strict mercury-free material requirements for use on submarines and surface ships. Quality assurance includes mandatory non-destructive First Article Testing (FAT) and Production Lot Testing, with one unit of each delivered to Naval Station Newport for government approval. Supplies must be preserved and marked according to MIL-STD-2073-1 and MIL-STD-129, including specific blue and yellow DLR labels for applicable items. The solicitation has undergone multiple amendments, extending the quote due date several times, with the most recent updates shifting the point of contact to Zachary R. Morrill. Payment will be processed through Wide Area Workflow (WAWF) using combined invoice and receiving reports. The contractor is granted a one-year warranty from the date of delivery for these non-complex supplies.
Navsup Weapon Systems Support Mech

POSTED

27 days ago

DEADLINE

in 2 days

General Info

NAICS

332993 - Ammunition (except Small Arms) Manufacturing

Place of Performance

FL

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8681 Aflcmc Ebd
Contacts2 people available
OfficeEGLIN AFB, FL, 32542-6883, USA
Office AddressEGLIN AFB, FL, 32542-6883, USA
Contacts
Stephanie R MillsContracting Officer
Sarah K. MarcialContract Specialist

Full Description

Show more
This is a Sources Sought synopsis for market research purposes only and is not a Request for Proposal (RFP). No solicitation is being issued at this time and this notice shall not be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. Participation is strictly voluntary with no cost or obligation to be incurred by the Government. The Air Force Life Cycle Management Center, Armament Directorate, Direct Attack Division seeks information on potential sources for contemplated ADU-916/E Massive Ordnance Penetrator (MOP) Loading Adapters (MLAs). The intent of this sources sought notice is to conduct a market investigation to collect supporting data and documentation on which to base an appropriate acquisition strategy. The North American Industry Classification System (NAICS) Code for this effort is 332993; with a small business size standard of 1,500 employees. Interested and capable sources are encouraged to respond to this synopsis with a Statement of Capability demonstrating their ability to fabricate and deliver ten (10) MLAs in accordance with the specifications/drawings. Furthermore, the Statement of Capability should provide evidence that the contractor has: (a) engaged in this type of manufacturing for at least 2 years; and (b) possesses or has access to the necessary equipment, data, personnel, manufacturing facilities and financial resources to fulfill the requirements of efforts of this type. The Statement of Capability must show high level manufacturing processes and techniques that clearly demonstrate the source's understanding of engineering aspects of fabricating the MLA. In addition to the Statement of Capability, firms responding to this announcement should include company name, CAGE code, point of contact, address, and indicate whether they are a small business, 8(a) concern, veteran-owned small business, service-disabled veteran-owned business, HUBZone small business, small disadvantaged business, or women-owned small business. Respondents are further requested to indicate their status as a Foreign-owned/Foreign-controlled firm and any contemplated use of foreign national employees on this effort. All prospective contractors must be registered in the System for Award Management (SAM) database to be awarded a DoD contract. No set-aside decision has been made. Note that a key factor in determining an acquisition to be a Small Business Set Aside is that small business prime contractors must perform at least 50% of the effort, as defined in FAR Clause 52.219-14.Please limit your Statement of Capability to no more than 10 single spaced, 10 point font typed pages. Small businesses with only partial capabilities of this requirement are encouraged to submit their capabilities statement demonstrating the portion of the requirement they are capable of providing/performing. This information will allow the Government to identify areas of possible breakout or possible subcontracting opportunities. The Government does not possess and will not be able to provide a full technical data package to potential offerors relative to this acquisition. However, the Government can provide the drawings and specifications upon request to prospective contractors that are registered in the Joint Certification Program (JCP) at http://www.dlis.dla.mil/jcp. Drawings will only be sent those contractors that are active in the JCP and will only be sent directly to the contact listed under the applicable CAGE code/JCP certification number. Note: Requests for drawings will not be accepted after 4:30 PM Central Time on Wednesday, 19 October 2016. Responses may be submitted electronically to the following e-mail address: stephanie.mills@us.af.mil. All correspondence sent via email shall contain a subject line that reads "MLA Sources Sought." If this subject line is not included, the e-mail may not get through e-mail filters at Eglin AFB. Filters are designed to delete emails without a subject or with a suspicious subject or attachment. Attachments with files ending in .zip or .exe are not allowable and will be deleted. Ensure only .pdf, .doc, .docx, .xsls, or .xls documents are attached to your email. All other attachments may be deleted. RESPONSES ARE DUE NO LATER THAN 1:00 P.M. (CST) ON 26 October 2016. Direct all questions concerning this requirement to Stephanie Mills at stephanie.mills@us.af.mil.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS