Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Motional Transducer

Active
FD20602600060Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense, through the DLA Aviation Procurement Operations at Warner Robins, is conducting market research to identify qualified manufacturers for the production of a Motional Transducer, identified as NSN 6695-01-554-1937UC and Part Number 3M2227C. This engine accessory component is used for the C-5 aircraft to measure and report thrust reverser position. The government intends to procure these items using Other Than Full and Open Competition, as prescribed by FAR 6.302-1, meaning competition is limited to entities that satisfy specific Distribution Statements and Export Control Notices. Interested parties must demonstrate their expertise and capability by contacting Brooke Whitford via email no later than October 28, 2026. This announcement is a sources sought synopsis for informational purposes and does not constitute a formal solicitation or a request for proposal. No funds are provided for the preparation of responses, and the government is under no obligation to award a contract based on this notice.

General Info

DOD seeks qualified manufacturers for C-5 aircraft motional transducers by October 28, 2026.

Agency

Department Of Defense → Ga DLA Aviation At Warner Robins

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

CA, 91355, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Ga DLA Aviation At Warner Robins
Contacts1 person available
OfficeROBINS A F B, GA, 31098-1813, USA
Organization / AgencyDepartment Of Defense → Ga DLA Aviation At Warner Robins
Office AddressROBINS A F B, GA, 31098-1813, USA
Contacts
Brooke Whitford
contact@example.gov

Full Description

Show more

Sources Sought Template



(Request for Interested Manufacturers)



FROM:  Brooke Whitford



TO:     DLA Aviation Procurement Operations at Warner Robins (SPRWA1)



LOCATION:  Robins AFB, GA 31098-1813



FBO Post Title: Request for Interested Manufacturers of NSN 6695-01-554-1937UC, Motional Transducer



SUBJECT:



Market research is being conducted to identify potential sources that may possess the expertise, capabilities, and experience to meet the requirements for qualification and production of NSN 6695-01-554-1937UC, Motional Transducer.



ITEM DESCRIPTION



The component of interest is a Motional Transducer, P/N 3M2227C, TO 1C-5M-4-11 F/9 I/41 for the C-5, whose primary function is to measure and report thrust reverser position as a percentage between fully stowed and fully deployed. NSN 6695-01-554-1937UC, Motional Transducer, is an engine accessory component



IMPEDIMENT TO COMPETITION:



Competition is limited to entities that meet requirements set forth by Distribution Statements and Export Control Notices of the technical data package.



INTEREST



Interested parties may identify their interest and capability to respond to the requirement no later than _28 Oct 2026 by emailing Brooke Whitford at Brooke.whitford.3@us.af.mil.  The Government intends to procure these items using Other Than Full and Open Competition as prescribed by FAR 6.302-1, Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements.



DISCLAIMER



This sources sought synopsis is for informational purposes only. This is not a request for proposal.  It does not constitute a solicitation and shall not be construed as a commitment by the government.   Responses in any form are not offers, and the government is under no obligation to award a contract because of this announcement.  No funds are available to pay for preparation of responses to this announcement.   Any information submitted by respondents to this technical description is strictly voluntary.

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
Hook Rescue Seat FabricationThis subcontract involves the manufacture and assembly of five certified Hook Rescue Seats, identified by NSN 4240-00-832-4220, for prime contractors supporting DLA supply contracts. The scope of work includes the fabrication of seat frames and the integration of rescue hook mechanisms in strict accordance with Kaman Aerospace technical data. All deliverables must adhere to RA001 quality standards and DLA Packaging Requirements RP001, with a specific prohibition against the use of additive manufacturing unless prior authorization is granted. Managed by the Department of Defense through DLA DIST SAN JOAQUIN, the project is categorized under NAICS code 336413. Performance of the contract will take place in Tracy, California. Interested parties must note the response deadline of October 26, 2026, to ensure all certification and fabrication requirements are met for the final delivery of the rescue seats.
DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
Air Filter Element Supplier (NSN 4130-01-615-1192)This subcontract involves the manufacture or sourcing of seven air filter elements for prime contractors supporting DLA supply contracts. The components must strictly adhere to Part Number 8499628 and NSN 4130-01-615-1192 specifications. All deliverables must be packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. The project is managed under the Department of Defense through DLA DIST SAN JOAQUIN, with performance taking place in Tracy, California. Due to the nature of the technical data involved, the supplier is required to maintain full compliance with ITAR or EAR export control regulations. The response deadline for this opportunity is October 26, 2026.
DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
Aircraft Structural Support FabricationThis subcontract for Aircraft Structural Support Fabrication involves the manufacture of seven completed structural components, identified by NSN 1560-01-606-0735, for prime contractors supporting the DLA Weapons Support ASC. The work requires precision machining to aerospace tolerances in strict accordance with TDP Rev A Gen 2 and Drawing 20145214 for part number L2400006-009. Performance of the contract will take place at Tinker AFB. To qualify for this project, the manufacturer must maintain NADCAP approval for all special processes and adhere to CMMC Level 2 security standards. Additionally, strict compliance with ITAR and EAR regulations is mandatory. The solicitation was posted on October 14, 2026, with a response deadline of October 22, 2026, under NAICS code 336413.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Oxygen-Clean Processing and Aerospace Packaging ServicesThis subcontract for Oxygen-Clean Processing and Aerospace Packaging Services supports prime contractors delivering aircraft fluid components to the DLA Weapons Support Fluid Handling Division of the Department of Defense. The scope of work involves performing specialized cleaning of parts in accordance with SAE AP1176 and IP042 oxygen-clean standards, utilizing certified clean-room facilities to ensure all components meet strict safety and quality requirements. In addition to cleaning, the provider is responsible for the marking and packaging of items following MIL-STD-2073-1E and MIL-STD-129 specifications. The final deliverable consists of certified, packaged, and marked oxygen-clean components. This opportunity falls under NAICS code 336413, with a response deadline set for October 21, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Aircraft Regulator Adapter and Spring Assembly ManufacturingThis subcontract involves the manufacture of adapter and spring assemblies for check valves used in aircraft regulator systems for the DLA Weapons Support Fluid Handling Division. The project requires the fabrication of seven completed aircraft regulator adapters, specifically adhering to Mission Systems Davenport Inc. part number 1611726-1 and DLA Master List RA001 and RQ001 standards. Due to the critical nature of these application items, precision machining is mandatory for all components. The contract is categorized under NAICS code 336413 and is managed through the Department of Defense.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Supplier of Refrigerant Filter-Drier and Seal Replacement KitsThis subcontract with the Department of Defense DDSP New Cumberland Facility requires the supply of 16 completed refrigerant filter-drier and seal replacement parts kits for prime contractors fulfilling DLA supply contracts. The supplier must source NSN 4130015973536 and adhere to strict military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance must be maintained through sampling performed according to MIL-STD-1916 or ASQ H1331. Additionally, the use of additive manufacturing is strictly prohibited unless prior approval is granted by the ESA. The performance of this contract will take place in New Cumberland, Pennsylvania.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
Precision Machining of Linear Actuating Cylinder PistonsThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, requires the manufacture of 1,000 high-precision pistons for linear actuating cylinders. The project is a total small business set-aside under NAICS code 336413. Production must strictly adhere to Reference Drawing NR 76823 and TDP Rev B Gen 3 specifications, utilizing CNC machining to ensure zero non-conformance for these critical application items. To be eligible for the contract, the provider must maintain JCP certification and CMMC Level 2 compliance. The solicitation was posted on October 14, 2026, with a response deadline of October 28, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
Fabrication and Assembly of Divider Assembly (NSN 1680-01-515-5125)This subcontract involves the fabrication and assembly of 2,000 Divider Assembly AI units for prime contractors supporting Defense Logistics Agency Aviation projects. The contractor is responsible for manufacturing components according to technical drawings for NSN 1680-01-515-5125 and completing final assembly in strict accordance with the DLA Master List of Technical and Quality Requirements. Key operational requirements include the use of precision machining and the implementation of a counterfeit electronic part detection system. To ensure quality and compliance, the contractor must provide comprehensive supply chain traceability documentation for all delivered assemblies. This project falls under NAICS code 336413 and is managed through the Department of Defense.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Supply of Aviation Web Component (P/N 205-030-919-57)This subcontract involves the sourcing or manufacture of a critical aviation web component, specifically part number 205-030-919-57, to support prime contractors delivering on Department of Defense contracts for the DLA Fleet Readiness Center. The contractor is responsible for delivering one unit of NSN 5306LNCC2522, ensuring the item is produced according to Bell Textron specifications. Strict quality and logistical standards must be maintained, including sampling per MIL-STD-1916 or ASQ H1331 and marking in accordance with MIL-STD-130N. Additionally, all items must be packaged following ASTM D3951 and MIL-STD-129 guidelines. The place of performance for this requirement is located in Cherry Point.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Manufacturing of Fluorescent Curb Lights (NSN 6220-99-882-9285)This subcontract involves the manufacturing of 127,000 fluorescent curb lights for prime contractors supporting the DLA Weapons Support ASC Commodities Division. Production must strictly adhere to TDP Rev B Gen 2 and Basic Drawing NR 98897 L49003 Revision NR H. Eligible contractors must hold JCP Certification for handling export-controlled data and maintain CMMC Level 2 compliance. Additionally, the provider must be an approved source or secure OEM approval from either Lockheed Martin or Goodrich Lighting Systems.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
FAIRING, AIRCRAFT
Solicitation # SPE4A5-27-T-1064
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
ADAPTER, REGULATOR, AIRC
Solicitation # SPE7M4-27-Q-0048
Solicitation SPE7M4-27-Q-0048 is a Firm Fixed Price request for the procurement of seven aircraft regulator adapters, identified by NSN 1660-00-286-2603 and Mission Systems Davenport Inc. part number 1611726-1. This critical application item is issued by the DLA Weapons Support Fluid Handling Division with a delivery requirement of 176 days after the date of order. The items are to be delivered FOB Destination to DLA Distribution Cherry Point in North Carolina, with both inspection and acceptance occurring at the origin. The contract mandates strict quality and technical compliance, including cleaning and packaging according to SAE ARP1176 and IP042 oxygen clean requirements. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to various FAR and DFARS clauses regarding cybersecurity, whistleblower rights, and the Buy American program. Offerors are required to provide representations and certifications through the System for Award Management.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Ga DLA Aviation At Warner Robins

Same awarding agency

NAICS: 331210
New
Federal
Supply of Aerospace-Grade Materials for Slat ProductionThis subcontract involves the supply of certified aerospace-grade alloys and raw metals intended for slat production for prime contractors on DLA Aviation projects. Managed by the Department of Defense through Ga DLA Aviation At Warner Robins, the contract requires all materials to be sourced and delivered in strict accordance with T.O. 1C-5M-4-5 F/24 I/35. To ensure full compliance with aviation standards, the provider must supply comprehensive Mill Test Reports and material certifications upon delivery to the manufacturer. Eligible providers must hold either ISO 9001 or AS9100 certification to qualify for this engagement. The opportunity was posted on October 14, 2026, with a response deadline of November 13, 2026. Performance for this contract is centered in Arkansas, falling under NAICS code 331210.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 11 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336413
New
Federal
Production of Aircraft Slats (LH7 and RH7)This subcontract involves the manufacture and qualification of aircraft slats for prime contractors supporting DLA Aviation projects under the Department of Defense. The selected provider is responsible for producing both First Articles and full-scale production units for Slat, Aircraft LH7 (P/N 4J10048-120G) and Slat, Aircraft RH7 (P/N 4J10048-119G). All work must strictly adhere to engineering drawings and Technical Order T.O. 1C-5M-4-5 F/24 I/35. To be eligible, contractors must possess aerospace-grade machining and fabrication equipment and maintain AS9100 or ISO 9001 certification. The project is categorized under NAICS code 336413 and will be performed in the 31088 zip code area. The response deadline for this opportunity is November 13, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336413
New
Federal
Slat, Aircraft LH7/RH7
Solicitation # FD20602600058REV02
The Department of Defense, through the Ga DLA Aviation At Warner Robins, is conducting market research via solicitation FD20602600058REV02 to identify capable sources for the production of C5 aircraft slats. The requirement specifically covers the Slat, Aircraft LH7 (NSN 1560007742115UC / P/N 4J10048-120G) and the Slat, Aircraft RH7 (NSN 1560007742114UC / P/N 4J10048-119G). The anticipated scope includes the delivery of first articles and production quantities across five option periods, with a total of 42 units planned. All production must adhere to Technical Order T.O. 1C-5M-4-5 F/24 I/35, and the contractor is responsible for providing all necessary materials, tools, and calibrated test equipment. Interested vendors must be registered in the Enhanced Joint Certification Program (EJCP) to access bidset documents and must possess or be able to obtain a Secret level security clearance. The government is seeking capability statements and RFI forms that detail the respondent's quality assurance processes, such as ISO 9001 or AS9100 certifications, and their socioeconomic status under NAICS code 336413. This sources-sought effort was posted on October 14, 2026, with a response deadline of November 13, 2026. Submissions should be directed to the primary point of contact, Danielle Rutland, or the secondary contact, Roberto Martinez-Perez.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336413
New
Federal
Request for Interested Manufacturers UP CONVERTER/DOWN CONVERTER
Solicitation # SPRWA1-27-R-0001
The Department of Defense is conducting market research to identify capable sources for the production of Double Mixer Up Converters and Double Mixer Down Converters used in the AN/ALQ-161 Electronic Warfare System for B-1B aircraft. The requirement includes an estimated quantity of 54 Up Converters and 36 Down Converters. These items follow a successful redesign and First Article Testing completed in 2024. Due to the lack of government-owned manufacturing-level technical data, the government intends to award a sole source contract to the original equipment manufacturer, Spectrum Microwave, under FAR 6.302-1. Interested parties must submit their capabilities to the DLA Aviation at Warner Robins contracting office by October 23, 2026. This notice serves as a sources sought synopsis for informational purposes and is not a formal request for proposal.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
Federal
F-15 Variable Inlet Ramp (Diffuser), Left Hand
Solicitation # FD20602700050
The Department of Defense, through the DLA Aviation Procurement Operations at Warner Robins, is conducting market research to identify potential manufacturers for the F-15 Variable Inlet Ramp (Diffuser), Left Hand, identified by NSN 1560-01-621-1723FX. This specific component is critical for controlling airflow to enhance engine performance and is used exclusively on F-15 E and EX model aircraft. Due to a lack of government-owned technical data, drawings, or schematics, the government intends to award a sole-source contract to The Boeing Company, as they are currently the only known source with the necessary technical expertise and data to ensure equipment compatibility. While the government intends to proceed with Other Than Full and Open Competition, other interested parties may submit their capabilities and interest to the designated points of contact by October 23, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 336412
Federal
Request for Interested Manufacturers of NSN: 4820-01-554-6411UC, PN: 320522-17, Valve Assembly, Directional Pilot and Pressure Switch (DPV)
Solicitation # SPRWA1-6411
The Department of Defense, through the DLA Aviation at Warner Robins, is conducting market research to identify potential sources for the production and qualification of a Valve Assembly, Directional Pilot and Pressure Switch (DPV), identified by NSN 4820-01-554-6411UC and Part Number 320522-17. This component is used in the C-5 aircraft to convert electrical signals into pneumatic air signals to control the central drive unit. Due to the fact that Honeywell International Inc. owns the data rights and has licensed them to Ontic Engineering and Manufacturing, the government currently identifies Ontic as the only known source capable of meeting the technical requirements and maintaining engine warranties with General Electric. Consequently, the government intends to pursue this procurement using other than full and open competition. Interested parties must submit their capabilities to Brooke Whitford or Vanessa Moes by October 21, 2026.
Aircraft Engine and Engine Parts Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 336413
Federal
Request for Interested Manufacturers of 6130-01-523-3338 Power Control Module (PCM) and 1095-01-523-5767 High Bandwidth Assembly (HBA) for the Bomb Release Unit (BRU)-57
Solicitation # SPRWA1-27-SSS_PCM_HBA
The Department of Defense is conducting market research to identify capable sources for the production and qualification of the Power Control Module (PCM) and High Bandwidth Assembly (HBA) used in the BRU-57/A Smart Bomb Rack for F-16 C/D aircraft. The PCM manages electrical power distribution, while the HBA facilitates high-speed data communication between the aircraft and smart weapons. Due to a lack of government-owned technical data and schematics, L3Harris is currently identified as the only source with the necessary expertise and data to ensure equipment compatibility. Consequently, the DLA Aviation at Warner Robins intends to award a sole source contract to L3Harris. Interested parties with the capability to meet these requirements must submit their interest to the primary point of contact by October 20, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 334511
Federal
Signal Data Converter (SDC) Supply for AN/APN-232 CARA SystemThe contract involves the supply of a single Signal Data Converter (NSN: 5895-01-567-7326, P/N: 8010000806-4) intended for integration into the AN/APN-232 CARA system used on F-16 aircraft. This equipment must meet F3I compliance standards and be accepted following military inspection to ensure it meets operational requirements. The procurement supports the Department of Defense through the Ga DLA Aviation office at Warner Robins, with the work being performed in Warner Robins as well. This subcontract falls under NAICS code 334511, which pertains to the manufacturing of electronic components. Although solicitation and set-aside details are not provided, the contract’s focus on delivering a high-precision military-grade data converter highlights its critical role in avionics systems. The contract supports ongoing efforts to maintain and upgrade the avionics capabilities of F-16 aircraft, ensuring compatibility and reliability under stringent defense standards.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS