Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MOTOR, ALTERNATING C

Active
SPE7M1-26-T-270UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract outlines the procurement of a single alternating current motor designated by NSN 6105-01-500-4242 and part numbers 872403201 and 801625-577-4 from Alfa Laval Inc and ABB Motors & Mechanical Inc respectively. The item is classified as a critical application with strict compliance requirements, including adherence to DLA packaging standards under RP001 and MIL-STD-2073-1E specifications for preparation, packaging, and marking in accordance with MIL-STD-129 without special markings. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the motor unless part of approved exceptions such as functional components in batteries, fluorescent lamps, or instruments, and where such items must meet NAVSEA 5100-003D requirements for shock resistance and secondary containment. Delivery is FOB origin with a strict quantity variance of plus or minus zero percent, and inspection and acceptance occur at the destination. The delivery window is 164 days from the contract award, with a required ship date of February 2, 2027 and an original delivery deadline of September 6, 2027. The sole delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation under SPE7M1-26-T-270U was issued as a total small business set-aside under NAICS code 335312, closed to responses by August 21, 2026, and is managed by the Department of Defense’s Maritime Supply Chain through the DLA. All technical and quality standards referenced are governed by the current revision of the DLA Master List of Technical and Quality Requirements as of the solicitation or award date, depending on acquisition size.

General Info

Procurement of critical AC motor with strict packaging, mercury restrictions, FOB origin, delivery to New Cumberland by Feb 2, 2027.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

RFQ SPE7M1-26-T-270U Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MOTOR,ALTERNATING C
MOTOR, ALTERNATING CURRENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
ALFA LAVAL INC 71871 P/N 872403201
ABB MOTORS & MECHANICAL INC 46UR5 P/N 801625-577-4
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017779014 0001 EA 1.000
NSN/MATERIAL:6105015004242
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7M1-26-T-270U
SECTION B
PR: 7017779014 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:C
UNIT CONT:FO OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/02/2027 Original Required Delivery Date:09/06/2027
SPE7M1-26-T-270U NSN/Part Number: 6105-01-500-4242 Quantity: 1 EA Purchase Request: 7017779014QTY: 1 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-T-270E
The contract pertains to the procurement of one alternating current motor with part number CM3546 and NSN 6105-01-210-4372, supplied by ABB Motors & Mechanical Inc or Baldor Electric Co under DLA contract SPE7M1-26-T-270E. Delivery is required within 20 days FOB origin to a government vessel shipment address aboard USS PORTLAND LPD 27 in San Diego, with no tolerance for quantity variance. The motor must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951. Packaging must follow MIL-STD-129 and RP001 guidelines, with palletization and labeling adhering strictly to DLA specifications. Sampling inspection must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise stipulated, and critical attributes must meet verification level VII or an AQL of 0.1. Mercury and mercury compounds are strictly prohibited in the motor or its components except for approved exceptions such as functional batteries, fluorescent lamps, sensors, or controlled instruments as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier. Inspection and acceptance occur at the destination point, and the supplier must ensure all documentation and unit of issue align with DoD standards as referenced in official DLA guidance. The required delivery date is August 6, 2026, with a solicitation response deadline of August 21, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
Commercial Fan Supply and PackagingThe contract pertains to the procurement, packaging, labeling, and shipment of circulating fans that must fully comply with U.S. military logistics standards and Defense Logistics Agency requirements. The work is to be performed at a specified location in Tracy, California, with the zip code 95304-5000, and the NAICS code 335312 identifies the industry as manufacturing household and commercial fans. This is a subcontract opportunity issued by DLA Dist San Joaquin under the Department of Defense, and all delivered items must meet stringent military-grade specifications for durability, labeling, and documentation to ensure seamless integration into the federal supply chain. The response deadline for submissions is August 20, 2026, and the solicitation is accessible through the DIBBS portal. Packaging and labeling must adhere to exact military directives to support storage, handling, and transportation within DoD logistics networks, and all units must be traceable and properly documented to comply with DLA inventory and accountability systems. Suppliers are expected to demonstrate capacity to meet volume requirements, maintain quality control throughout production, and deliver on schedule without disruption. While no set-aside classification is specified, bidders must be prepared to provide full compliance documentation, including certifications of origin, material safety, and conformance testing, to be considered for award. The contract does not include solicitation number details publicly visible, but the official link to the solicitation is accessible via the DIBBS platform.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
Power Supply Unit Manufacturing (P/N TH-4322)The contract calls for the manufacture and delivery of ten or more military-specification power supply units identified by part number TH-4322, with strict adherence to environmental, quality, and packaging standards required for defense applications. All units must meet exacting military specifications to ensure reliability under operational conditions, and the supplier is expected to demonstrate full compliance throughout production, testing, and shipment. This is a subcontract opportunity classified as a Total Small Business Set-Aside under the Small Business Administration guidelines, exclusively open to certified small businesses as defined by FAR 19.5, ensuring that the procurement supports small business participation in federal defense contracting. The NAICS code 335312 designates this as an electrical equipment manufacturing activity, specifically within the power supply and transformer category. The solicitation was posted on August 9, 2026, with a firm response deadline of August 24, 2026, and is administered by the Department of Defense through the LAND SUPPLY CHAIN organization. Performance location details are not specified, but the units are intended for use in defense systems managed by the agency. The contract is available through the DIBBS platform, and potential bidders must fully understand and meet all technical, regulatory, and compliance requirements associated with military-grade power supply manufacturing. No point of contact is listed, so interested parties should refer to the official solicitation link for detailed submission instructions and technical documentation.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 335312
New
DIBBS
Supply of Magnetic Contactors (NSN: 6110010787382)The contract solicits the supply of 19 commercial off-the-shelf magnetic contactors classified under NSN 6110010787382, specifically designed to meet military specifications and packaging standards for integration into defense power control systems. These components are critical for reliable operation in demanding military environments and must comply with all applicable defense quality and environmental requirements. The order is issued as a subcontract under the NAICS code 335312, indicating it falls within the electrical equipment manufacturing sector, and is managed by the Department of Defense through the Maritime Supply Chain organization. Proposals must be submitted by the deadline of August 20, 2026, with the contract originating from a solicitation posted on August 9, 2026. The place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, where final delivery and inspection are expected to occur. Although no specific point of contact or set-aside details are provided, the contract is clearly aligned with defense logistics requirements, emphasizing readiness and compliance over commercial flexibility, and is accessible via the DLA DIBBS platform for bidding and documentation.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
AC Motor Manufacturing and SupplyThe contract requires the manufacture and supply of one AC motor per order, fully compliant with military specifications MIL-SPEC 57368, identified by NSN 6105014926183 and part number MR1049-NM. Each motor must be delivered FOB origin with a strict five-day turnaround from the time of order placement, ensuring rapid availability for critical military operations. The item falls under NAICS code 335312 and is procured as a subcontract under the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS office. Delivery is directed to a P.O. Box address in FPO with zip code 96322-1400, indicating overseas military distribution. The solicitation opened on August 9, 2026, with responses due by August 20, 2026, and all submissions must meet exact military standards without deviation.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
Power Supply Procurement and SupplyThe contract requires the source, supply, and delivery of 21 military-specification power supplies identified by NSN 6130011644343, ensuring full compliance with all applicable federal and defense performance standards. These units must meet rigorous technical and operational requirements to support defense operations and are intended for delivery to the designated place of performance in Jacksonville, Florida, with the ZIP code 32212-0103. The procurement is structured as a subcontract under the NAICS code 335312, which corresponds to the manufacturing of electrical equipment and components, and is administered by the Department of Defense through the Jacksonville BLDG office. The solicitation was posted on August 9, 2026, with a firm deadline for responses set for August 20, 2026, providing interested parties a window of eleven days to submit proposals. All bidders must ensure adherence to defense-grade specifications and delivery timelines, as failure to meet these obligations could result in contract non-compliance.
JACKSONVILLE BLDG

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
Qualified Manufacturer of MIL-SPEC Circuit BreakersThe contract requires the manufacture and delivery of 29 military-grade circuit breakers identified by part number M83383/04-10, fully compliant with the MIL-PRF-83383F(1) specification. All units must be produced by a qualified manufacturer listed on the Qualified Products List (QPL), and the supplier is responsible for completing first article testing to verify conformance to all technical and performance requirements. The work is to be performed at Robins Air Force Base, Georgia, with a strict delivery deadline aligned with the solicitation response due date of August 20, 2026. This is a subcontract under the Department of Defense, classified under NAICS code 335312 for electrical equipment manufacturing, and is managed by the Active Devices Division to support defense system reliability and operational readiness.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L1-26-U-0557
The contract is for the procurement of a POWER SUPPLY with part number TH-4322, issued under solicitation SPE7L1-26-U-0557 by the Defense Logistics Agency (DLA) as a Total Small Business Set-Aside under NAICS code 335312. The unit of issue is each (EA), with an estimated quantity of 10 units at a unit price of $10.00, though this quantity is explicitly noted as non-guaranteed and may not be purchased; the contract is an Indefinite Delivery Contract (IDC) with a maximum value of $350,000 and a minimum guarantee of one unit. Deliveries are FOB Origin, with inspection and acceptance occurring at the destination, and the delivery schedule requires completion within 127 days after award. Packaging must conform to MIL-STD-2073-1E using packaging code U, unit container D3, intermediate container E5, and preservation method 31, while marking must comply with MIL-STD-129 and include the contract number, NAWC CAGE code, and part number on bare items unless otherwise directed by associated technical drawings. Palletization must adhere to DLA Packaging Requirements RP001. The item must meet stringent technical and quality specifications from the DLA Master List of Technical and Quality Requirements, including RQ011 (removal of government identification from non-accepted supplies), RQ017 (bare item marking), and RQ018 (retention of supply chain traceability documentation per DLAD Procurement Notes #C03). Mercury or mercury-containing compounds are strictly prohibited except in specific exempted applications such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA, and when present, must be contained within shockproof devices with a secondary containment barrier per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conforming units required unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The contractor must maintain cybersecurity compliance consistent with CMMC Level 2 self-assessment requirements and safeguard covered defense information per DFARS
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4666
The contract involves the procurement of 21 units of a power supply identified by NSN/Part Number 6130-01-164-4343 under solicitation SPE7L7-26-T-4666, with a delivery requirement of 18 days after award. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons regardless of location, including foreign nationals employed by U.S. companies or their subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and access to the controlled data is restricted exclusively to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required DOD training on handling export-controlled technical data, and have been formally authorized by DLA. The solicitation, issued by the Department of Defense through the Jacksonville Building office, is open to federal contractors with a response deadline of August 20, 2026, and a posting date of August 9, 2026, under NAICS code 335312. Primary contact for inquiries is Molly Teegarden, reachable via email or phone provided in the contract data.
JACKSONVILLE BLDG

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
ARMATURE, MOTOR
Solicitation # SPE7M1-26-T-268J
The contract pertains to the procurement of two armatures for motors, identified by part number 888146-0-54S and NSN 6105011573021, supplied by WARD LEONARD CT LLC with CAGE code 63743. The item is designated as a critical application component, requiring strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The supplies must be free of intentional mercury or mercury-containing compounds, except for specific functional uses in batteries, lamps, sensors, weapon systems, or Navy-specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. Packaging must comply strictly with MIL-STD-2073-1E, including preservative methods, desiccant, humidity indicators, and packaging levels designated as military grade. The containers must be properly blocked, braced, and immobilized to survive Distribution Cycle 18, Assurance Level II under ASTM D4169, and must meet all performance criteria for safe delivery; failure to do so necessitates redesign. Marking must follow MIL-STD-129 and ASTM D5445, including special markings such as “Do Not Bend,” “Arrow Up,” “Center of Balance,” and “Open This Side,” with serial numbers documented on all packaging levels and reflected in the packing list. All items must be delivered FOB origin within 165 days to DLA Distribution at Robins AFB, Georgia, with a required ship date of February 2, 2027, and original delivery date of May 9, 2028. The contract is structured as a Small Business Set-Aside under NAICS code 335312, with a total quantity of two units at a unit price of $2.00, and requires the contractor to provide ready-to-issue, serviceable materiel for direct DOD use.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M0-26-T-034F
The contract pertains to the procurement of one alternating current motor with NSN 6105-01-492-6183 and part number MR1049-NM, governed by MIL-SPEC 57368, under solicitation SPE7M0-26-T-034F. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including packaging code U, standard marking per MIL-STD-129, and palletization guidelines. Mercury and mercury-containing compounds are prohibited from direct contact with the motor unless specifically exempted for functional components like batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The final destination is the US Naval Base Sasebo, Japan, with a parcel post address for FPO AP 96322-1400 and a designated point of contact at DLA for inquiries. The required delivery date is August 6, 2026, with mandatory adherence to DLA transport procedures C19 and C20, and the item is classified under NAICS code 335312 for alternating current motor manufacturing.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
SYNCHRO, RECEIVER-TRANS
Solicitation # SPE7M5-26-T-397H
The contract pertains to the procurement of a Synchro Receiver-Transmitter, identified by NSN 5990-00-852-2369 and part number M20708/74-01A, with a requirement for 16 units to be delivered within 511 days from the contract award, FOB origin. The item must comply with the SAE AS20708C standard revision C dated June 1, 2019, and the referenced SAE AS20708/74B specification, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. The product is designated as a critical application item and must adhere to strict configuration change management procedures, including the use of Qualified Products Lists or Qualified Manufacturers Lists where applicable. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, lighting, sensors, weapon systems, or specified chemical reagents, and any permitted mercury-containing devices must include shockproof design and secondary containment per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with specific packaging methods, materials, and unit container codes, and all marking must satisfy MIL-STD-129 without special identification beyond the standard code 00-00. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the delivery point. The purchase request number is 7017776806, with a total contract value of $256.00 at $16.00 per unit, and the solicitation was issued under contract SPE7M5-26-T-397H with a response deadline of August 20, 2026. Transportation and freight logistics are governed by DLA procedural notes C19 and C20, and the item falls under NAICS code 335312 for industrial control equipment manufacturing.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 333996
New
DIBBS
RING, WEARING
Solicitation # SPE7M1-26-Q-1344
The contract is for the procurement of three wearing rings identified by NSN 4320-01-505-0957 under solicitation SPE7M1-26-Q-1344, with a firm fixed price and zero variance allowance for quantity. Delivery is required within 30 days after award, with FOB origin and inspection and acceptance occurring at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes. Packaging must use approved materials and methods including drying, protective wrap, and a designated unit container, and palletization must follow DLA standards. The shipment is to be delivered to DLA Distribution San Joaquin in Tracy, California, with transportation governed by specific DLA procedural notes. The contract prohibits intentional addition or direct contact of mercury or mercury compounds unless exempted for functional uses such as batteries, fluorescent lamps, or weapon system components, which must include secondary containment as specified by NAVSEA 5100-003D. Sourcing may require casting or forging, and if government tooling is not available, suppliers must submit a casting and forging assistance request. The item is part of a larger procurement under the Department of Defense, managed by the Maritime Supply Chain, with a primary point of contact at DLA and a mandatory response deadline in August 2026.
Fluid Power Pump and Motor Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334515
New
DIBBS
DETECTOR, RADIO FREQ
Solicitation # SPE7M1-26-T-270T
The contract is for the procurement of a Radio Frequency Detector with NSN 6625-00-877-7148 and part number 7017775627, under solicitation SPE7M1-26-T-270T, issued as a Women-Owned Small Business Set-Aside. The requirement specifies adherence to stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with the revision effective on the solicitation issue date controlling compliance. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined. The detector must be free from intentional use of mercury or mercury-containing compounds except in limited functional applications such as batteries, fluorescent lights, or instrumentation approved by NAVSEA, with portable devices required to have shockproof construction and a secondary containment barrier. Use of Class I ozone-depleting substances is strictly prohibited in all phases of design, manufacturing, testing or cleaning without written approval from the Contracting Officer. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, under DLA Packaging Requirements, with no special marking required and palletization following RP001 guidelines. Hazardous materials handling, if applicable, must conform to IP025 standards. The item is to be delivered FOB origin, with inspection and acceptance occurring at destination, and a firm quantity of 47 units must be delivered within 164 days of contract award, with no variance allowed. Delivery is directed to Tinker AFB, Oklahoma, with an original required delivery date of February 4, 2027 and a need ship date of February 2, 2027. Each unit is priced at $47.00, totaling $2,209. The technical data referenced is incomplete, yet the delivered item must meet or exceed all cited specifications. The contract applies to the specific part numbers from approved manufacturers including Thales, Anritsu, Northrop Grumman, and Keysight Technologies.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
CALIBRATION CHECK KIT,
Solicitation # SPE7M1-26-T-270L
The contract is for the procurement of two Calibration Check Kits for gas monitors, identified by part number A-CAL-40-F-10027938-00-0-1002802 and NSN 6665-01-538-2224, under solicitation SPE7M1-26-T-270L. Delivery is required within 20 days to Fort Carson, Colorado, with FOB destination terms, zero variance allowed in quantity, and inspection and acceptance to occur upon delivery. The kits are subject to stringent packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including special marking codes and palletization per DLA standards, and must be shipped via traceable freight, excluding parcel post. The item may contain batteries and must comply with federal hazardous materials packaging standards if applicable, otherwise meet ASTM D3951 for commercial packaging. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The equipment is for government use only, with specific reporting codes and delivery instructions tied to the contract’s unique identifiers. The supplier must adhere to all labeling, packaging, and shipping directives outlined in the requirements, including the mandatory use of traceable shipping methods and shipment to the designated military delivery point at Fort Carson. The contract includes detailed commercial item data, unit of issue, and pricing structured under a single CLIN with two units at the quoted price, and specifies that the required delivery date is August 6, 2026, with a response deadline for the solicitation set for August 21, 2026. The solicitation is classified under NAICS code 334511 for manufacturing instruments and related equipment, under the Department of Defense, managed by the Maritime Supply Chain. The point of contact for inquiries is Michael Reese, and the item falls under a federal procurement framework governed by DoD acquisition policies and standardized logistics protocols.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
ELECTRICAL STANDARD
Solicitation # SPE7M1-26-T-270V
This contract outlines the technical, packaging, and hazardous material requirements for the procurement of a single electrical item with NSN 6625-01-366-3837 under solicitation SPE7M1-26-T-270V. The item, valued at one unit, must be delivered FOB origin within 20 days of the required delivery date of August 18, 2025, with no quantity variance permitted. All packaging and labeling must comply with MIL-STD-129 and DLA’s RP001 packaging standards, with non-hazardous materials packaged according to ASTM D3951 unless superseded by higher-priority DLA technical requirements. If the item contains hazardous materials as defined by FED-STD-313, the supplier must provide a fully completed Safety Data Sheet adhering to 29 CFR 1910.1200 and include the OSHA-compliant hazard communication label; failure to classify correctly may result in non-acceptance. The item must be shipped via traceable freight to the designated military facility at Camp Pendleton, California, and parcel post is strictly prohibited. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The contract specifies the point of contact, delivery instructions, and government-only identifiers for tracking and logistics use.
Bare Printed Circuit Board Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333914
New
DIBBS
PUMP, ROTARY
Solicitation # SPE7M1-26-Q-1347
This contract is for the procurement of four rotary pumps, identified by NSN 4320-01-503-1000 and part number MHC729, under solicitation SPE7M1-26-Q-1347. The item is classified as a critical application item and must comply with Item Unique Identification (IUID) requirements per MIL-STD-130 and the DFARS clause 252.211-7003. Pricing is firm fixed price with no tolerance for quantity variance—exactly four units must be delivered. The delivery schedule requires fulfillment within 30 days after delivery order issuance, with shipment originating from the supplier’s location and inspection and acceptance occurring at the destination. Packaging must strictly adhere to MIL-STD-2073-1E with specified methods for preservation, wrapping, and containment, and marking must follow MIL-STD-129 without any special labeling. Palletization must meet DLA’s packaging requirements. The item is to be delivered to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, Pennsylvania, 17070-5002, with transportation governed by DLA procedural notes C19 and C20. The contract references technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and controlled by the revision in effect on the solicitation issue date. The procurement is under NAICS code 333914 and falls under the Department of Defense, managed by the Maritime Supply Chain office. The primary point of contact is Kelsey Schlagenhaft, and the material need date is July 27, 2026. The solicitation was posted on August 10, 2026, with a response deadline of August 17, 2026.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GATE
Solicitation # SPE7M1-26-T-270F
The contract pertains to the procurement of one gate valve, part number LHD-8430, with NSN 4820-01-270-4247, supplied by WILLIAM E WILLIAMS VALVE CORP. The item is classified as a critical application component and must strictly comply with DLA packaging and technical requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the valve, except for specified functional uses in batteries, lighting, instruments, weapon systems, or reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Delivery must occur within five days FOB origin to the destination inspection point, with zero tolerance for quantity variance. The valve must be packaged and palletized per DLA standards, identified with correct packaging codes, and shipped via traceable freight methods—parcel post is prohibited. Shipping instructions direct delivery to a U.S. Naval Station in National City, California, with a required delivery date of August 7, 2026. The contract is governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date, and all documentation must align with the authorized unit of issue per DoD guidelines. The solicitation number is SPE7M1-26-T-270F, with a response deadline of August 21, 2026, and primary point of contact is Misty Eckard of the Maritime Supply Chain under the Department of Defense.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
New
DIBBS
FILTER ELEMENT, INTAKE
Solicitation # SPE7M1-26-Q-1334
The contract pertains to the procurement of 1,572 filter elements for intake air cleaner systems, identified by NSN 4310-01-466-8495, under solicitation SPE7M1-26-Q-1334. Delivery is required within 180 days after contract award, with a total purchase request volume of 4,758 units indicating potential future call-offs or aggregated requirements. The technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the acquisition size. Any configuration changes or deviations must be formally submitted via an Engineering Change Proposal or a Request for Variance. The contractor is also required to overpack one copy of the manufacturer’s commercial manual covering operation, service, maintenance, and repair instructions. Government identification must be removed from any non-accepted supplies during handling. The contract is managed by the Department of Defense through the Maritime Supply Chain office, with the place of performance located in New Cumberland, Pennsylvania. All inquiries should be directed to the primary point of contact, Sara Wilson, at the provided email and phone number. The solicitation was posted on August 10, 2026, with responses due by August 20, 2026, and is administered through the DIBBS procurement system.

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
SEAT, VALVE
Solicitation # SPE7M1-26-Q-1004
The contract is for the procurement of 41 units of a valve seat identified by NSN 4820-01-551-2424, issued under solicitation number SPE7M1-26-Q-1004 by the Department of Defense through the Maritime Supply Chain. The solicitation was posted on August 10, 2026, with a response deadline of August 20, 2026, and the delivery requirement is set for 230 days after award. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The procurement is categorized as a federal action with no set-aside designation, and the primary point of contact for inquiries is Sara Wilson, reachable via email at sara.1.wilson@dla.mil or phone at 4457371625. The solicitation is accessible through the DIBBS website for further details and submission.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBE
Solicitation # SPE7M1-26-Q-1311
The contract specifies the procurement of 33 units of a globe valve with a copper alloy body and a 1.0 inch size, identified by the NSN 4820-01-106-2406. The item is classified as a critical application component and must conform to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must follow DLA’s RP001 requirements and MIL-STD-129 for labeling and marking, with palletization adhering strictly to DLA packaging protocols. The valve must be delivered in firm fixed price terms with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Delivery is required within 150 days after award, with FOB origin terms applying. The required packaging and unit of issue are specified, and the item must be shipped to DLA Distribution Depot Hill at Hill AFB, Utah, per the provided shipping and parcel post addresses. The purchase request number is 7017049162, with a scheduled delivery date of December 19, 2026. The contract is issued under solicitation SPE7M1-26-Q-1311, with responses due by August 20, 2026, and points of contact are provided through the DLA procurement system.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLY
Solicitation # SPE7M1-26-T-270Q
This contract specifies the procurement of two power supply units, part number XPF60-20S with NSN 6120-01-724-1912, supplied by AMETEK INC under solicitation SPE7M1-26-T-270Q. The items must be delivered within 206 days from the contract date, with a firm delivery deadline of March 16, 2027, and are subject to zero tolerance for quantity variance. Delivery is FOB origin and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with compliance tied to the revision in effect on the solicitation or award date. Packaging must conform to MIL-STD-2073-1E, including specific preservation methods, wrap materials, and unit containment, with marking fully compliant with MIL-STD-129 and no special markings required. Palletization follows DLA packaging standards. The supplier must hold a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment, and the item is designated as a critical application. Covered Defense Information applies, requiring adherence to data protection protocols. The unit of issue is each, priced at $2.00 per unit. Transportation and shipping instructions are governed by DLAD procedural notes C19 and C20, with all deliveries directed to the specified DDSP New Cumberland facility.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334515
New
DIBBS
LEAD, TEST
Solicitation # SPE7M1-26-T-270C
The contract pertains to the procurement of two units of LEAD, TEST with NSN 6625-00-042-4430 under solicitation SPE7M1-26-T-270C, issued by the Department of Defense through the Maritime Supply Chain organization. Delivery is required within 20 days after order, with responses due by August 21, 2026, and the solicitation was posted on August 10, 2026. Full and open competition is applicable, and the NAICS code 334515 indicates the industrial classification. The item involves technical data subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including foreign nationals within the U.S., with compliance mandated under DFARS 252.225-7048. Access to this controlled data is restricted to contractors approved by DLA, requiring JCP certification, completion of specific DOD export training, and approval via the DLA questionnaire. Additionally, the contract incorporates DLA packaging requirements, cybersecurity requirements mandating CMMC Level 2 certification for third-party assessors, and provisions for removing government identification from non-accepted supplies. The place of performance is Keyport, WA, with Michael Reese listed as the primary point of contact.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336340
New
DIBBS
CYLINDER ASSEMBLY, H
Solicitation # SPE7M1-26-T-270R
The contract specifies the procurement of a right-hand, single-end wheel cylinder assembly with a boot, designed for 15,000-pound trailers and used on the M416A1 quarter-ton cargo trailer, manufactured by ETS Hoking Corp under model MHU-110M. It is classified as a critical application item, requiring strict adherence to military and defense standards. Manufacturing must follow approved technical data packages referencing specific drawings and quality assurance provisions, with mandatory use of DCSC Drawing 16236 CS-2300-0001 for chemical agent resistant coatings and high-temperature finishes in place of Army drawing specifications. The item is cast using a metal casting process, requiring specialized tooling, and suppliers must comply with configuration change management procedures and deviation request protocols. Quality conformance is governed by zero-based sampling plans per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively—unspecified attributes default to major. Acceptance requires zero non-conformances unless otherwise stated, and a Certificate of Quality Compliance must accompany each shipment. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and no special marking codes. Mercury or mercury-containing compounds are prohibited except for exempted functional uses such as batteries or instruments, which require secondary containment. The contract requires delivery of 221 units within 71 days FOB destination, with inspection and acceptance occurring at the destination. All items must be shipped to the DLA distribution facility in New Cumberland, Pennsylvania, with a required ship date of May 11, 2026, and are subject to a small business set-aside.
Motor Vehicle Brake System Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details