Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MOTOR, ALTERNATING C

Active
SPE7M5-26-T-355TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

BLDG 467, BREMERTON, WA, 98314-6001, US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-355T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Lea Dawn Robertson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MOTOR,ALTERNATING C
MOTOR, ALTERNATING CURRENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
REQUIRES ENGINEERING SOURCE APPROVAL BY THE
GOVERNMENT DESIGN CONTROL ACTIVITY.
ALTERNATE OFFEROR REQUIREMENTS:
THE FOLLOWING DOCUMENTATION IS REQUIRED IN
ACCORDANCE WITH MIL-T-31000. (A) ALL DRAWINGS
AND SPECIFICATIONS REQUIRED FOR MANUFACTURE.
(B) PROCESS/OPERATION SHEETS WHICH DESCRIBE
IN DETAIL EACH CRITICAL PROCESS AND ASSOCIATED
INSPECTION/ACCEPTANCE CRITERIA. (C)
IDENTIFICATION OF SOURCES WHO WILL PERFORM
CRITICAL PROCESSES/OPERATIONS, INCLUDING
SOURCES OF FORGINGS AND CASTINGS. (D) IF
AVAILABLE COPIES OF PURCHASE ORDERS FROM THE
ITEM. (E) A SHOCK EXTENSION REPORT IN
ACCORDANCE WITH MIL-S-901 AND IN A FORMAT AS
SPECIFIED IN DI-ENVR-80706 IS REQUIRED.
IF THE OEM'S DETAILED DRAWINGS ARE NOT
AVAILABLE, THE OFFEROR MUST SUPPLY AN
ENGINEERING ANALYSIS REPORT WHICH DETAILS HOW
THEIR DRAWINGS WERE DEVELOPED. ADDITIONALLY,
IF REVERSE ENGINEERING WAS USED, THE COMPLETE
PROCEDURE WILL BE REPORTED INCLUDING: NUMBER
OF SAMPLES, METHODS AND MEASURES USED, ALL DATA
COMPILED, RATIONALE FOR DIMENSION TOLERANCE
DEVIATION, AND RATIONALE FOR ACCEPTANCE. THIS
DATA WILL BE FORWARDED TO THE ENGINEERING
SUPPORT ACTIVITY FOR NSN/Part Number: 6105-01-093-7174 Quantity: 8 EA Purchase Request: 7011801076QTY: 8 Delivery: 375 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING CThe contract pertains to the procurement of three alternating current motors with NSN 6105-01-346-1347 under solicitation SPE7M0-26-T-005Z, issued by the Department of Defense’s Maritime Supply Chain ESOC Buys. Delivery is required within five days after award, with a firm delivery date of July 13, 2026, and FOB origin terms place transportation risk and costs on the contractor until items are loaded at the origin. Items must be delivered to the Portsmouth Naval Shipyard in Kittery, ME, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation method 10 (cooling/drying), wrapping in jute material, medium cushioning, unit container D3, and intermediate container E5, with palletization meeting DLA Packaging Requirements for Procurement (RP001). All items must be marked in accordance with MIL-STD-129 using standard military barcoding for NSN, contract number, and traceability, with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except in specific functional applications like batteries, fluorescent lights, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shock-proof with a secondary containment boundary as per NAVSEA 5100-003D. Contract clauses incorporate deviations covering equal opportunity for workers with disabilities, trafficking in persons, employment eligibility verification, sustainable products, cybersecurity requirements including NIST SP 800-171 and basic safeguarding of contractor information systems, prohibitions on hexavalent chromium and toxic materials, prohibition of acquisition from communist Chinese military companies, export control, electronic payments via WAWF, acceleration of payments to small business subcontractors, and compliance with the System for Award Management. The contract applies fixed-price supply and service terms, with inspection governed by FAR 52.246-2, and includes provisions for contract modifications, changes, and default. All submissions must be made electronically through DIBBS, with no paper or manual submissions permitted. Offerors must provide a unique entity identifier and CAGE code, certify small business status, and disclose any joint venture partners with their UEIs, particularly if applying under WOSB, EDWOSB, SDVOSB
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335312
New
DIBBS
REGULATOR SET, VOLTAThe contract solicitation is for a REGULATOR SET, VOLTA with NSN 6110-15-037-0562 and a quantity of 76 units, under purchase request 7017226532. The requirement is part of a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond. The solicitation is issued under NAICS code 335312, which corresponds to Electric Lighting and Wiring Equipment Manufacturing, and is managed by the Department of Defense through the Maritime Supply Chain office. No technical data is currently available for the part, and offerors must submit a complete data package covering both the approved and alternate part configurations. The delivery deadline is set at 187 days from award, with performance to occur in Tracy, California, 95304-5000. The solicitation was posted on July 27, 2026, and responses are due by July 30, 2026. The primary point of contact is Michael Reese, reachable via email and phone provided in the contract details.
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING CThe contract solicitation SPE7M1-26-T-217K is for one unit of an alternating current motor with NSN 6105-01-282-8829, procured under simplified acquisition procedures by the Department of Defense’s Maritime Supply Chain through DLA Land and Maritime. Delivery is required within 208 days ADO with a firm delivery deadline of September 30, 2026, and shipment must originate from the contractor’s location under FOB Origin terms, though final acceptance occurs at the destination in New Cumberland, Pennsylvania, where the item will be inspected and received by Government personnel. Packaging, preservation, and labeling must strictly adhere to DLA Packaging Requirements for Procurement (RP001) and military standards MIL-STD-2073-1E and MIL-STD-129, including the use of Data Matrix barcodes and Method 41 – Clinging/Dry preservation with no additional preservative material. All hazardous materials must be labeled in compliance with OSHA’s Hazard Communication Standard and DFARS 252.223-7001, with advance disclosure of any alternative labeling required. The contract incorporates numerous FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material safety, cybersecurity safeguards, subcontracting, inspection at destination, default remedies, and payment acceleration for small business subcontractors. Cybersecurity obligations are robust, requiring compliance with NIST SP 800-171 DOD Assessment Requirements and the safeguarding of covered defense information under DFARS 252.204-7012, with deviation 2026-O0025 applicable. The offeror must provide a complete data package for both approved and alternate parts, disclose unique entity ID and CAGE code, and certify size status and socioeconomic status including WOSB, SDVOSB, HUBZone, or SDB if claiming small business preferences. Affirmative responses regarding covered defense telecommunications equipment trigger mandatory disclosures of OEM and distributor information at any tier. Payment must be processed via WAWF using an Invoice and Receiving Report for this fixed-price supply line item, and no contract value is specified in the solicitation due to absence of a formal pricing section. Proposals must be submitted electronically through DIBBS by July 27, 2026, and all technical and quality requirements are governed by
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, SPRING, REEL
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
RECTIFIER, METALLICThe contract solicitation is for six metallic rectifiers identified by NSN 6130-01-295-7452, with delivery required 202 days after the date of order, targeting a need ship date of February 15, 2027. The items are to be delivered FOB origin to the designated receiving warehouse at 25600 S CHRISMAN ROAD, REC WHSE 57, TRACY, CA 95304-5000. All packaging must strictly adhere to MIL-STD-2073-1E, including specific preservation methods (CLNG/DRY), wrapping materials (JA), and unit container types (D3), while also complying with DLA's RP001 packaging requirements. Marking must follow MIL-STD-129, incorporating barcodes on all containers and proper hazard labeling per 29 CFR 1910.1200, with exception for materials regulated under FIFRA, FDCA, or CPSA. Mercury and mercury-containing compounds are strictly prohibited unless used in specified functional components such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents approved by NAVSEA, and even then, portable devices must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with R and I number references controlling compliance. Inspection and acceptance occur at destination under FAR 52.246-2, and payment must be submitted electronically via WAWF in accordance with DFARS clauses. The contract type is not specified but is to be determined by the Contracting Officer, with evaluation likely based on lowest price technically acceptable due to the absence of detailed evaluation factors and the use of simplified acquisition procedures. Offerors must provide UEI and CAGE codes, declare small business status and socioeconomic certifications, and comply with representation requirements for covered defense telecommunications equipment. No pricing data is provided in the solicitation, as unit and extended prices are left blank for offeror submission. The solicitation number is SPE7L7-26-T-4341, issued July 27, 2026, with a response deadline of July 30, 2026, and it references prior contract SPE7L715M6334
DLA DIST SAN JOAQUIN

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ELECTRICALThe contract solicitation SPE4A1-26-T-2468 is for the procurement of five electrical motors, NSN 6105007317384, from GE Aviation Systems LLC, part number 105115-08, under a fixed-price supply contract. Delivery is required within 166 days, with the original delivery date set for September 13, 2027, and a need ship date of January 10, 2027. All items are to be delivered FOB Origin to Robins Air Force Base in Georgia, with inspection and acceptance occurring at the destination. The unit of issue is each, with zero variance allowed in quantity. Packaging must comply with ASTM D3951, but is superseded by the DLA Master List of Technical and Quality Requirements, which governs all technical, quality, and packaging standards including palletization under RP001. Marking and labeling must adhere strictly to MIL-STD-129 with GS1-128 or Data Matrix barcodes, and bare item marking is required under RQ017, though Unique Item Identification is waived per DFARS 252.211-7003(c)(1)(i). Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances expected for critical attributes, major attributes requiring AQL 1.0, and unspecified attributes treated as major. Cybersecurity compliance mandates CMMC Level 2 self-assessment and adherence to NIST SP 800-171, with safeguarding of covered defense information governed by DFARS 252.204-7012 and 252.204-7008. The contract prohibits use of covered defense telecommunications equipment per DFARS 252.204-7018 and requires compliance with hazardous material labeling per 29 CFR 1910.1200 and MIL-STD-129. Invoicing must be processed through WAWF, and transportation via foreign-flag vessels is prohibited unless a waiver is granted. Offerors must represent size status and socioeconomic certifications and provide Unique Entity Identifiers for all joint venture parties. The solicitation is open for bids via the DIBBS portal with a submission deadline of July 30,
AVIATION SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335312
New
DIBBS
DISTRIBUTION BOXThe contract is for the procurement of one Distribution Box identified by NSN 6110016442112 and part number EP-0003221 under solicitation SPE7M0-26-T-006L, issued by the Department of Defense’s Maritime Supply Chain ESOC Buys through the Defense Logistics Agency. This is a simplified acquisition set aside for small businesses, with a required delivery of five days after award, FOB origin, and delivery to DLA LMP Zone 1 Building 552 North, 7th Street H Avenue, Texarkana, TX 75507-5000. The item must be shipped by the fastest traceable means, excluding parcel post, and is subject to strict packaging standards per MIL-STD-2073-1E, including preservation method 10, cushioning material JC, unit container D3, and intermediate container E5 with pack code U. Marking must conform to MIL-STD-129 with no special marking required. Palletization follows DLA Packaging Requirements for Procurement, and acceptance occurs at the destination point with zero variance allowed in quantity. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements identified by R or I numbers, and applicable clauses include prohibitions on hexavalent chromium, toxic materials, export-controlled items, and Communist Chinese Military Companies, as well as requirements for electronic invoicing via WAWF and safeguarding of contractor information systems. The contractor must maintain SAM registration, comply with the Berry Amendment and Buy American Act, and submit certifications regarding size, socioeconomic status, and covered defense telecommunications equipment. Payment is governed by WAWF instructions and accelerated payments to small business subcontractors are mandated, with compliance required for all representations and certifications in SAM as of award date. The original delivery date is July 13, 2026, and quotations must be submitted via DIBBS in accordance with the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
Federal
Resolver, Electrical
DLA Land And Maritime

POSTED

about 24 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334118
New
DIBBS
MICROCIRCUIT, DIGITAThe contract solicits ten units of a microcircuit designated as DIGITA with NSN 5962-01-369-4271, under solicitation number SPE7M5-26-T-355A, issued by the Department of Defense’s Active Devices Division. Delivery is required within 46 days after order, and responses must be submitted by August 7, 2026. The item is classified under NAICS code 334118 and is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions tied to its status as a qualified item under Federal Supply Class 5962. Compliance includes adherence to the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List, as well as fulfillment of procurement note M01 governing qualification standards for semiconductors and electronic microcircuits. Packaging must conform to DLA standards, and contractors are obligated to retain full supply chain traceability documentation per DLAD Procurement Note C03 dated August 2016. Physical identification of the bare item is required, and all government identification must be removed from non-accepted supplies. The solicitation further applies to covered defense information, and no data package is available, meaning the offeror must provide complete technical and approval documentation for both the primary and any alternate part. The point of contact is Margaret Smith with the Department of Defense.
Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITAThis contract pertains to the procurement of a military-grade microcircuit, specifically identified as NSN 5962-01-168-8667, under Federal Supply Class 5962 for electronic microcircuits. The item is a critical application component with approved part numbers MM54C923J-MIL and MM54C923J/883B from National Semiconductor Corporation, and is subject to stringent qualification, traceability, and packaging standards mandated by the Defense Logistics Agency. Compliance with DLA Master List technical requirements, including qualified supplier lists for semiconductors, is mandatory, and the supplier must maintain complete supply chain traceability documentation in accordance with DLAD Procurement Note C03. Traceability and test reports must be submitted electronically no later than 15 days before delivery, limited to 15 MB per email and named precisely according to contract-specific conventions, and no shipment may proceed without written authorization from the contract administrator. Each lot must include a completed DLA Land and Maritime Form 918 and authorization confirmation within the packaging, and failure to comply renders payment non-final. The microcircuit must be packaged in strict adherence to MIL-STD-2073-1E and MIL-STD-129, with ESD and EMI protection compliant with MIL-PRF-81705 using qualified barrier materials listed on QPL-81705. Cushioning must meet A-A-59136 Class 1 Grade B density requirements (1.7 to 2.2 lb/ft³) with minimum thickness exceeding lead length by 1/8 inch, or alternatively, components must be secured in form-fitting ESD-protective containers. All individual unit packs must be labeled per IPC/JEDEC J-STD-609 to clearly identify lead finish attributes, and mercury or mercury compounds are strictly prohibited except under specified exceptions for functional uses in batteries, sensors, or instruments per NAVSEA guidance. The item is to be delivered FOB origin within 115 days, with no variance allowed in quantity, and inspection and acceptance occur at destination. The contract requires a cybersecurity maturity model certification level 2 self-assessment, and the sole point of performance and shipping address is DLA Distribution in Columbus, Ohio.
Semiconductor and Related Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRIThe contract specifies the procurement of electrical plug connectors identified by part number M39012/30-0503 and NSN 5935004304109, with a total quantity of 360 units divided into two line items: 36 units at $7017602347-0001 and 324 units at $7017602347-0002, both at a unit price of $1.00. Delivery is required within 84 days from the contract date, with FOB origin terms, zero variance in quantity, and inspection and acceptance occurring at the destination. The item is classified as a commercial item and must comply with MIL-PRF-39012F Sup 1 and MIL-PRF-39012/30J specifications. It is subject to strict quality and technical requirements mandated by the DLA Master List of Technical and Quality Requirements, which override all other standards. Zero-defect sampling is required under MIL-STD-1916 or equivalent zero-based plans, and attributes are assigned verification levels or AQLs consistent with critical, major, and minor classifications. The product must be marked and packaged per MIL-STD-129, commercially packaged per ASTM D3951 unless hazardous, in which case Fed-Std-313 IP025 applies, and palletization must meet DLA packaging rules. Use of ozone-depleting substances is prohibited unless prior written approval is obtained, and the item is restricted to qualified products listed under QPL for FSC 5935. Two distinct delivery addresses are specified—one for San Diego, CA and one for Robins AFB, GA—with required ship dates of January 15, 2026 and January 1, 2027 respectively, though the original delivery deadline for both is December 5, 2026. All documentation and compliance must adhere to DLA procedures and the solicitation SPE7M5-26-T-354T, issued under NASIC code 334417 by the Department of Defense's Active Devices Division.
Electronic Connector Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
COOLER, AIR, ELECTRONThe contract pertains to the procurement of two electronic air coolers identified by NSN 5999-01-185-7701, with a delivery requirement of 289 days after award. The solicitation, issued under number SPE7M5-26-T-355G by the Department of Defense’s Active Devices Division, mandates full compliance with DLA packaging, physical marking, and government identification removal standards, including RQ011 and RQ017. The supplier must adhere to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date or an amendment if issued. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and the contract applies to Covered Defense Information as defined in RD002. The alternate offeror must submit a complete data package detailing both the approved and alternate parts. The contract is open for bids until August 7, 2026, with performance to be delivered to Hill AFB, Utah, and all submissions must be made through the DIBBS platform.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334220
New
DIBBS
COUPLER, ROTARY, RADIO FThe contract solicitation SPE7M5-26-T-331K seeks the procurement of nine units of a Rotary Radio Frequency Coupler identified by NSN 5985010182621 and part numbers 3131 from Frontgrade Technologies Inc. and 36-2120-0 from Diamond Antenna & Microwave Corporation, with a required delivery within 253 days of award and FOB Origin terms. The item must conform to technical and quality specifications from the DLA Master List of Technical and Quality Requirements, including RQ006 for Quality Conformance Inspection and RD004 for CMMC Level 2 Self-Assessment, with precedence given to DLA directives over commercial standards such as ASTM D3951. Packaging and marking are strictly governed by MIL-STD-129 and DLA Packaging Requirements RP001, with hazardous materials required to meet TQ Requirement IP025 per FED-STD-313, while non-hazardous items must follow commercial packaging standards but remain subordinate to DLA mandates. The contract mandates electronic invoicing exclusively through WAWF, with inspection and acceptance performed at the origin, and compliance with cybersecurity requirements including Safeguarding Covered Contractor Information Systems and NIST SP 800-171 assessments. All offerors must possess a UEI and CAGE code, represent their small business status if applicable, and comply with clauses prohibiting forced confidentiality agreements, trafficking in persons, and requiring employment eligibility verification. The solicitation indicates an automated award process likely based on Lowest Price Technically Acceptable (LPTA), with no pricing data provided in Section B and no evaluation factors explicitly listed beyond the requirement to meet minimum technical standards. Deliveries are directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with additional obligations including flow-down of cybersecurity, hazardous material labeling, and ocean transportation requirements to subcontractors, while all documentation must adhere to FAR and DFARS clauses including those related to changes, contract types, and unenforceable obligations.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334417
New
DIBBS
DUMMY CONNECTOR, PLUThis contract specifies the procurement of 230 units of a dummy connector, plug, identified by drawing number 1555424 Revision W and NSN 5935-00-911-7195, under solicitation SPE7M5-26-T-327A. The item is source-controlled, meaning only approved manufacturers—DCX-Chol Enterprises Inc, Diehl Defence GmbH & Co. KG, ITT Cannon LLC, Thermal Electronics Inc, and BAE Systems—are eligible to supply the component, and all delivered units must strictly conform to the drawing and associated limited rights data, which the government does not provide. Offerors must have direct access to this data or traceability to the approved sources, and any new vendors seeking qualification must contact the cognizant design activity. The contract prohibits the use of ozone-depleting chemicals and intentional inclusion of mercury or mercury-containing compounds, except for specific functional applications like batteries, sensors, and instruments specified by NAVSEA, which must include a secondary containment. Packaging must comply with MIL-STD-2073-1E using a clean/dry preservation method, unit pack with sealed plastic bag and fiberboard box, and labeling must adhere to MIL-STD-129 with no special marking required. Delivery is FOB origin, with a 186-day ADO timeline, and inspection and acceptance occur at the destination location, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates electronic invoicing and receiving reports through WAWF and requires compliance with all applicable cybersecurity standards, including NIST SP 800-171 and safeguarding of covered defense information under DFARS 252.204-7012. Offerors must also certify compliance with federal regulations on trafficking in persons, employment eligibility verification, sustainable products, and hazardous materials handling. The solicitation incorporates numerous FAR and DFARS clauses related to subcontracting, changes, inspection, default, payment, whistleblower rights, cybersecurity, and prohibitions on acquiring equipment from designated Chinese vendors or using hexavalent chromium. Socioeconomic set-asides for small businesses, WOSB, SDVOSB, HUBZone, and 8(a) firms are eligible, and the contract is subject to all applicable federal procurement rules with no defined contract type specified but clearly fixed-price in nature given the clauses referenced.
Electronic Connector Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334290
New
DIBBS
PANEL, RADIO FREQUENThe contract solicitation SPE7M5-26-T-328U seeks the procurement of 33 units of a Radio Frequency/Electromagnetic Interference Shielded Panel identified by NSN 5999014938118 under a total small business set-aside, with NAICS code 334290. Delivery is required within 148 days of award, with a target delivery date of February 7, 2027, and must be made FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must comply with stringent technical and quality standards including MIL-STD-1916 for sampling with zero non-conformances required in inspection lots, MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking and barcoding, with no special marking prescribed. All packaging and palletization must adhere to DLA Packaging Requirements for Procurement (RP001) and hazardous material handling procedures (IP025). The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval. Compliance with cybersecurity and regulatory mandates is critical, including a CMMC Level 2 Self-Assessment (RD004) and adherence to NIST SP 800-171 requirements for safeguarding covered contractor information systems, under deviations 2026-00038 and 2026-O0025. The contract incorporates FAR and DFARS clauses covering equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, export controls, prohibition of hexavalent chromium, electronic payment submission via WAWF, and accelerated payments to small business subcontractors. Inspection and acceptance occur at the destination by the government, with contractor responsibility for full compliance with all referenced standards and configuration change management (RQ002). Offerors must hold a valid UEI and CAGE code, self-certify as a small business, and disclose any joint venture arrangements. Payments are subject to DFARS electronic submission requirements, and no contract price is listed in the CLIN, indicating pricing is to be determined upon award.
Other Communications Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKERThis contract issued under solicitation SPE7M5-26-T-355K requires the supply of four circuit breaker units with NSN 5925-01-676-8215, identified by part number ABSNVR-LV432895-02 and PL491-02-020 REV B from Carolina Power Systems of Sumter Inc. The units must be delivered within 73 days of contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 packaging directives, with hazardous material handled per FED-STD-313 and TQ requirement IP025. Mercury or mercury compounds are strictly prohibited unless functionally essential and explicitly authorized, such as in batteries or specific instruments, with portable devices containing mercury required to have shockproof construction and a secondary containment barrier in accordance with NAVSEA 5100-003D. All items must be properly labeled and palletized as specified, and transportation logistics follow DLA procedural notes C19 and C20. The contract mandates strict adherence to government unit of issue standards and includes mandatory documentation for source approval and removal of government identification from non-accepted items.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThe contract is for the procurement of 14 units of a CONNECTOR, RECEPTACL identified by NSN 5935-01-699-2808 under solicitation SPE7M5-26-T-330T, issued by the Department of Defense’s Active Devices Division. Delivery is required within 72 days of order receipt, with a mandatory delivery date of October 8, 2026, and shipment must be FOB Origin to the designated receiving warehouse in Tracy, California. Full and open competition applies, and the contract follows simplified acquisition procedures. The item must meet technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging and marking must comply with MIL-STD-129 for labeling, barcoding, and palletization per RP001, while hazardous materials require adherence to FED-STD-313 and TQ Requirement IP025, and non-hazardous items must be commercially packaged. Mercury or mercury-containing compounds are prohibited except in specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-approved reagents, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, with sampling conducted under MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, with AQLs of 0.1, 1.0, and 4.0, and any unspecified attributes are deemed major. Acceptance requires zero non-conformances if sampling is based on MIL-STD-105/ASQ Z1.4 unless otherwise noted. The contractor must comply with stringent cybersecurity mandates including DFARS 252.204-7012 for safeguarding covered defense information and 252.240-7997 for NIST SP 800-171 compliance, submitting an assessment score via the Supplier Performance Risk System. Export-controlled items are restricted under DFARS 252.225-7048, and the use of telecommunications equipment from prohibited entities such as Huawei or ZTE is banned
Electronic Connector Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
HEAT SINK, ELECTRICA
Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
CONTACT, ELECTRICALThis contract is for the procurement of electrical contacts identified by NSN 5999-01-699-2986 and part number 200-503-109, with a total quantity of 171 units, each priced at $171.00, resulting in a total contract value of $29,241.00. The items must be delivered within 70 days from the required delivery date of December 6, 2026, under FOB origin terms with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container specifications. All items must be marked in accordance with MIL-STD-129 without special marking, and palletization must follow DLA Packaging Requirements. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. Technical and quality requirements are governed by the DLA Master List, and the solicitation number is SPE7M5-26-T-329Z. The contract is issued by the Department of Defense’s Active Devices Division, with a response deadline of July 27, 2026, and the point of contact is Andrew Bracken. The unit of issue is the individual, aligned with ANSI X12 standards, and transportation protocols follow DLA Procurement Notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
New
DIBBS
ANTENNA

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details