Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MOTOR, ALTERNATING CURR

Active
SPE7M0-26-T-011JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single alternating current motor with NSN 6105-01-148-8022, issued as a small business set-aside under NAICS code 335312 by the Department of Defense through the Maritime Supply Chain ESOC Buys office. The solicitation, identified as SPE7M0-26-T-011J, was posted on July 19, 2026, with a response deadline of July 30, 2026, and requires delivery within five days after order placement. All supplies must comply with the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, which govern technical and quality standards and are subject to revision timing rules based on acquisition type. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the motor or associated hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents per NAVSEA 5100-003D. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary. No data is currently available, and the alternate offeror must submit a complete data package covering both the primary and alternate part proposals. The point of contact for inquiries is Laurie Wassmuth, reachable via email and phone.

General Info

Small business contract for AC motor NSN 6105-01-148-8022, delivery in five days, mercury prohibited except specified uses.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

RFQ SPE7M0-26-T-011J for DLA Maritime Supply Chain ESOC Buys

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Laurie Wassmuth
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MOTOR,ALTERNATING CURRENT
MOTOR,ALTERNATING CURRENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 6105-01-148-8022 Quantity: 1 EA Purchase Request: 7017535600QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335312
New
DIBBS
POWER SUPPLY SUBASSThe contract pertains to the procurement of a single unit of Power Supply Subassembly, part number 900-09008-001, manufactured by Magnetek Inc with CAGE code 25230, identified by NSN 6130-01-287-8507. Delivery is required within 20 days to the destination FOB point, specifically the USS HOWARD DDG 83 at FPO AP 96667, with zero tolerance for quantity variance. All items must be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. The supply is classified as a critical application item and is subject to stringent restrictions on ozone-depleting substances; mercury or mercury-containing compounds are prohibited unless used in specific exempted applications such as batteries, fluorescent lamps, or weapon systems, and even then must meet dual-containment and shock-proof requirements per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced through R or I numbers, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE7L7-26-T-4374, with an original required delivery date of July 9, 2026, and a required ship date yet to be specified. Transportation logistics are governed by DLA procurement notes C19 and C20, and unit of issue is defined per DoD standards. The point of contact for the procurement is Kathy Smith of the Defense Logistics Agency, with solicitation responses due by July 31, 2026.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
Federal
MOTOR,ALTERNATING CThis contract pertains to the procurement of an ALTERNATING MOTOR, identified by Cage Code 63743 and reference number A/405TNC/38, under solicitation SPRMM126QMH10 issued by the Defense Logistics Agency (DLA) Mechanicsburg. The requirement mandates strict adherence to MIL-STD-130 Rev N for marking, and any changes to design, material, servicing, or part number require prior written approval from the NAVICP-MECH Contracting Officer, with specific code classifications detailing the nature of substitutions. Inspection is performed at source under E06 guidelines, and the contractor assumes full responsibility for quality assurance, including maintaining inspection records for 365 days after final delivery. Packaging must comply with MIL-STD-2073, and the item must be delivered without variation from the specified technical parameters. The contract enforces electronic compliance through WAWF for invoice and receiving report submissions, and requires registration on the PIEE EDA portal to monitor order status. Vendors must be authorized distributors of the original equipment manufacturer, with proof of authorization submitted with their offer. All documentation, including drawings and specifications, is subject to distribution statements governing access and dissemination, particularly with restrictions against foreign nationals and unauthorized release. Award will be based on the Lowest Price Technically Acceptable methodology, and failure to comply with any provision—such as omitting OEM information, misrepresenting part equivalency, or missing electronic submission requirements—will disqualify the proposal. The response deadline is August 3, 2026, and all contractual documents are considered officially issued upon electronic transmission.
SPRMM1 DLA Mechanicsburg

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335312
New
Federal
MOTOR,DIRECT CURRENThis solicitation, issued under Emergency Acquisition Flexibilities, seeks a Firm-Fixed Price procurement for a MOTOR,DIRECT CURREN with NSN 7102567-002 and CAGE code 53711, requiring strict compliance with MIL-STD packaging and Government Source Inspection. All submissions must be emailed to STEPHANIE.R.PEREZ7.CIV@US.NAVY.MIL by August 17, 2026, and must include unit price, total price, delivery lead time, CAGE codes for award and inspection, cost breakdown with profit rate, and a minimum 90-day quote expiration. The item must be manufactured or distributed by an authorized source, and non-manufacturers must provide official documentation from the OEM proving authorization. The contract mandates adherence to MIL-STD-130 Rev N for marking, prohibits unauthorized design or part number changes without written approval, and requires the contractor to maintain complete inspection records for 365 days post-delivery. All provisions are subject to Buy American requirements, Small Business Subcontracting Plan obligations, and Security Prohibitions as outlined in recent deviations effective February 2026. The Government will evaluate quotes based first on price, followed by past performance and supplier risk as defined in DFARS 252.204-7024. Delivery is FOB Origin, and acceptance requires bilateral execution, with the contractor’s written agreement necessary before order execution. The offering must be submitted via email with all required certifications and documentation, including compliance with the Mandatory Use of Workflow Pro Assist Module and Wide Area Workflow Payment Instructions. Distribution of technical documents is governed by specific labeling codes under OPNAVINST 5510.1, with noFORN and Official Use Only materials requiring formal certification. Only authorized distributors will be considered for award, and failure to provide proof of authorization will disqualify a submission. The solicitation is issued by the Department of Defense’s Naval Supply Systems Command Weapon Systems Support office in Mechanicsburg, Pennsylvania, under solicitation number N0010426QXB80.
Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

in 28 days
View Details
NAICS: 335312
New
DIBBS
Electrical Enclosure and Junction Box SupplyThe contract is for the supply of NEMA-rated electrical enclosures and junction boxes to support control and power systems at TRHS facilities, under a subcontract awarded by the Defense Logistics Agency on behalf of the Department of Defense. The work falls under NAICS code 335312, which classifies it as manufacturing electrical equipment and components, indicating the items must meet defined industry standards for durability, environmental protection, and operational safety in demanding conditions. The contract was posted on July 19, 2026, and is tied to procurement reference numbers SPE3SE26D0003 and SPE3SE26F0797, with performance expected to support critical defense infrastructure. While specific delivery locations and points of contact are not detailed, the equipment is intended for use in military or government-controlled environments requiring compliance with rigorous electrical and environmental specifications.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335312
New
DIBBS
Electrical Motor Supply (NSN 6105007317384)The contract involves the supply of five electrical motors identified by NSN 6105007317384 for use in defense applications, requiring full compliance with Department of Defense technical specifications, packaging standards, labeling protocols, and cybersecurity mandates. The motors must meet all applicable military performance and safety criteria to ensure operational reliability in mission-critical environments. The solicitation, categorized as a subcontract under NAICS code 335312, is being managed by the Aviation Supply Chain under the Department of Defense, with performance occurring at Robins Air Force Base, Georgia, zip code 31098-1887. The opportunity was posted on July 19, 2026, and responses are due by July 27, 2026, with no set-aside provisions specified, leaving eligibility open to qualified contractors regardless of business size or status. All submissions must adhere strictly to the technical and administrative requirements outlined by the Defense Logistics Agency to be considered.
AVIATION SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335312
New
DIBBS
AC Motor Supply and Technical ComplianceThe contract calls for the supply of one military-specification alternating current motor identified by NSN 6105-01-148-8022, with strict adherence to all technical, logistical, and regulatory requirements. Full compliance is mandated across packaging, labeling, hazardous materials reporting, export controls, and cybersecurity standards for Controlled Unclassified Information, ensuring the component meets DoD operational and security protocols. The requirement is issued as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and falls under NAICS code 335312 for electric motor and generator manufacturing. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, and is managed by the Maritime Supply Chain ESOC Buys office under the Department of Defense. Although no specific place of performance or point of contact is listed, the procurement is accessible through the DIBBS platform, indicating it is part of the Defense Logistics Agency’s acquisition system. All proposals must satisfy federal compliance obligations related to CUI handling and export control classifications, making technical and regulatory expertise as critical as manufacturing capability.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
Electrical Panel Manufacturing and AssemblyThe contract calls for the design, fabrication, and assembly of a military-specification electrical panel that must fully comply with DLA standards and applicable MIL-STD requirements, ensuring ruggedness, reliability, and interoperability in demanding operational environments. The work is classified as a subcontract under NAICS code 335312, targeting manufacturers with proven capability in producing defense-grade electrical systems, and performance is required at FPO with ZIP code 09578. The solicitation was posted on July 19, 2026, with responses due by July 27, 2026, under the purview of the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. Although no set-aside type or point of contact is specified, participation is restricted to entities capable of meeting stringent military compliance standards without deviation.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335312
New
DIBBS
Voltage Transducer Manufacturing and SupplyThe contract specifies the manufacture and supply of military-specification voltage transducers, requiring full compliance with defense-grade technical and quality standards. All units must undergo rigorous testing to ensure performance under extreme operational conditions, with strict configuration control measures to maintain consistency and traceability throughout production. Packaging and labeling must adhere to military and logistical requirements, ensuring compatibility with existing supply chains and secure handling during transit and storage. The work is structured as a subcontract under the Department of Defense, with the contracting agency identified as Maritime Supply Chain, and falls under NAICS code 335312 for electrical component manufacturing. Responses are due by July 30, 2026, with the solicitation originally posted on July 19, 2026, and all deliverables must be performed in accordance with federal defense procurement guidelines.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
Electrical Component Supply – ELEC Connector PlugThe contract entails the supply and delivery of 13 units of electrical connector plugs identified by NSN codes, all of which must comply with military specifications and federal logistics standards. These components are critical for defense systems and are required to meet rigorous performance, durability, and interoperability requirements associated with military-grade equipment. The work is to be performed in Baltimore, Maryland, with the zip code 21226-5000 designated as the place of performance. The solicitation falls under the NAICS code 335312, which classifies the manufacturing of electrical lighting and wiring equipment, indicating the nature of the industry involved in fulfilling this requirement. This is a subcontract opportunity issued by the Department of Defense under the LSO COMBAT VEHICLES AND ARMAMENT organization, and it was posted on July 19, 2026. Interested parties must submit their responses by the deadline of July 30, 2026, to be considered for award. The contract type is explicitly labeled as a subcontract, meaning the winning vendor will be working under a prime contractor or another tiered procurement structure rather than directly with the government. The opportunity is accessible via a public link on the DIBBS platform, ensuring transparency and accessibility for qualified suppliers within the defense supply chain.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
TRANSDUCER, VOLTAGEThe contract is for the procurement of two voltage transducers, identified by NSN 6115011175805, under solicitation SPE7M1-26-T-217P, issued by the Department of Defense’s Maritime Supply Chain, Defense Logistics Agency. The delivery is scheduled for 20 days after receipt of order, with a required delivery date of July 21, 2026, and shipment is designated FOB origin to DZ IKMAL MERKEZI KOMUTANLIGI in Derince, Izmit, Turkey. Packaging must comply with MIL-STD-2073-1E, with packaging code Q at level B, unit container D3, and preservation method 10 (drying/cold storage). Marking follows MIL-STD-129 with no special marking required, and palletization adheres to DLA Packaging Requirements for Procurement (RP001). The product must not contain mercury or mercury compounds except in specific exempted applications such as functional batteries, fluorescent lights, sensors, or chemical reagents authorized by NAVSEA, and portable mercury-containing devices must have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and the contract includes numerous FAR and DFARS clauses governing procurement, cybersecurity, hazardous materials, payment, and contract administration. Key cybersecurity requirements include safeguarding covered defense information (252.204-7012), prohibiting acquisition of covered telecommunications equipment (252.204-7018), and reporting cyber incidents. Hazardous material compliance is required under 252.223-7001 and 252.223-7006, including proper labeling and avoidance of hexavalent chromium. The contract type is fixed-price, with deviation 2026-00038 applied to clauses 52.204-13, 52.213-4, and 52.216-1. Invoicing must be processed electronically via Wide Area WorkFlow (WAWF), and inspection and acceptance occur at the origin. Offerors must maintain valid SAM registration, comply with UEI and CAGE code requirements, and submit socioeconomic representations
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ELECTRICALThe contract pertains to the procurement of five electrical motors identified by NSN 6105-00-731-7384 and part number 105115-08 from GE Aviation Systems LLC, with a total delivery requirement of five units to be furnished FOB origin. The delivery window spans 166 days from the contract issuance, with the original required delivery date set for September 13, 2027, and a needed ship date of January 10, 2027. All items must comply with stringent DLA packaging standards, including ASTM D3951 and MIL-STD-129 for marking and labeling, while DLA’s Master List of Technical and Quality Requirements takes precedence over all other specifications. Packaging must be palletized according to RP001 requirements and shipped to the specified DLA Distribution location at Robins Air Force Base, Georgia. Inspection and acceptance occur at the destination, with zero variance permitted in quantity. Sampling for quality verification follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Compliance with CMMC Level 2 Self-Assessment is mandatory, and government identification must be removed from non-accepted supplies. Documentation for source approval requests is required, and no item unique identification is needed per customer request. The contract was issued under solicitation SPE4A1-26-T-2468, categorized under NAICS code 335312, with Angelina Dunlap serving as the primary point of contact.
AVIATION SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335312
New
Federal
61--MOTOR,ALTERNATING CURRThe contract seeks the procurement of one unit of NSN 6105011488022, a MOTOR, ALTERNATING CURR, to be delivered to DZ IKMAL MERKEZI KOMUTANLIGI within five days of award. The approved source for this item is uniquely identified as 71956 801631-531, and only quotes submitted electronically by responsible suppliers will be considered. The solicitation, identified as SPE7M026T011J, is a combined action issued under a Total Small Business Set-Aside, strictly limited to small businesses as defined by the SBA, and falls under NAICS code 335312 for electric motor and generator manufacturing. It was posted on July 19, 2026, with responses due by July 30, 2026, and no hard copies or technical specifications are available—vendors must rely solely on the online solicitation accessible through the provided SAM.gov link. The issuing agency is DLA Land and Maritime, headquartered in Columbus, Ohio, with all inquiries directed to the designated buyer contact email, and performance location details remain unspecified in the data provided.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 313320
New
DIBBS
HOSE ASSEMBLY, NONMETALA nonmetallic hose assembly with a 5/8 inch inner diameter and 71 inch length is being procured under solicitation SPE7M0-26-T-013N for a single unit delivery, with a required delivery date of July 15, 2026, and a five-day delivery window after award. The item is identified by NSN 4720-01-268-5326 and must comply with Technical Data Package Rev A Gen 1 per drawing number 81495 7091249 Revision A dated 09/11/1986 and reference SAE J517-2020 as Type 100R2, classifying it as a Type I (Code W) item with a non-extendable 120-month shelf life. The procurement is subject to DLA Packaging Requirements and MIL-STD-2073-1E packaging standards with marking per MIL-STD-129, including special coding for shelf life and Type I designation. The item is designated as critical application and must be shipped via traceable means—parcel post is prohibited—with delivery FOB origin to the specified address in Ronkonkoma, NY. The contract requires full and open competition, prohibits quantity variance, and mandates inspection and acceptance at destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the unit of issue is as defined by authorized DoD standards. The point of contact for the solicitation is Abigail Masterson, and the contract is managed under the Department of Defense’s Maritime Supply Chain ESOC Buys office.
Fabric Coating Mills

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CARTRIDGE VALVE SANThe contract is for the procurement of four cartridge valve units with NSN 4730-01-529-5515 under solicitation SPE7M0-26-T-013R, requiring delivery within five days of award, FOB origin, with no tolerance for quantity variance. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951, and must be packaged and labeled per MIL-STD-129 with palletization following RP001 DLA Packaging Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly permitted by the specification. Packaging must adhere to the specified Unit of Issue and Quantity per Unit Pack, with no use of parcel post; shipment must occur by the fastest traceable means to the designated delivery point in Texarkana, Texas. The contract mandates government identification be removed from non-accepted supplies and includes specific marking requirements for the consignee, freight address, and ship-by instructions with mandatory reference to the provided DLA tracking and code identifiers. The required delivery date is June 29, 2026, with the solicitation response deadline set for July 31, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 221118
New
DIBBS
CIRCUIT BREAKERThe contract is for the procurement of 50 circuit breakers identified by NSN 5925-01-466-9170, with a delivery requirement of five days after contract award. The solicitation number is SPE7M0-26-T-013D, issued by the Department of Defense’s Maritime Supply Chain ESOC Buys office, with a response deadline of July 31, 2026, and a posting date of July 20, 2026. The procurement is governed by DLA packaging and technical quality requirements referenced through R and I numbers, which are defined in the DLA Master List of Technical and Quality Requirements accessible online. The revision of the master list in effect at the time of solicitation or award controls compliance. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except in specific applications such as batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or chemical analysis reagents explicitly authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. No technical data is available at this center, so the alternate offeror must submit a complete data package covering both the primary and alternate parts. Delivery performance is to be conducted at Bremerton, Washington, and the primary point of contact for inquiries is Rocio Mino.
Other Electric Power Generation

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334513
New
DIBBS
SWITCH, LIQUID LEVELThe contract pertains to the procurement of one unit of a liquid level switch with NSN 5930-01-492-9140, supplied by Babington Technology, Incorporated under a firm fixed price arrangement with no variance allowed in quantity. Delivery is required within 30 days after award, with shipment originating from the supplier and destination inspection and acceptance occurring upon arrival at the specified delivery point. All packaging must comply with DLA’s master list of technical and quality requirements, prioritizing those over ASTM D3951, and must adhere strictly to MIL-STD-129 for marking and labeling. If the item is classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. Palletization must follow RP001: DLA Packaging Requirements for Procurement. The item must be shipped via traceable means, explicitly excluding parcel post, to the delivery address in Boise, Idaho. The government purchase request number is 7017523169, and the required delivery date is July 16, 2026. Contract information is tied to solicitation SPE7M0-26-Q-1079, which was posted on July 20, 2026, with responses due by July 23, 2026. Point of contact for the solicitation is Laurie Wassmuth of the Department of Defense’s Maritime Supply Chain ESOC Buys.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 5 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR BODY, RECEThe contract pertains to the procurement of a commercial off-the-shelf connector body, part number 5-582151-2, with NSN 5935-01-320-1623, sourced from TE Connectivity Corporation. Two line items are specified: three units at $3.00 each and four units at $4.00 each, totaling seven units with a combined value of $25.00. Delivery is required within five days from the origin, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. If the item is non-hazardous under FED-STD-313, it must be packaged in accordance with ASTM D3951; if hazardous, it must follow TQ requirement IP025. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA packaging standards. The unit of issue is each, and quantity per unit pack is one. Shipping must be via the fastest traceable means; parcel post is prohibited. Delivery must reach the Puget Sound Naval Shipyard in Bremerton, WA, with designated freight and parcel post addresses provided. The original required delivery date is July 17, 2026, under contract SPE7M0-26-T-013M, and the solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026. Government-specific codes and contacts, including the point of contact Rocio Mino, are included for administrative and logistics purposes.
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMEThis contract specifies the procurement of a nonmetallic hose assembly under solicitation SPE7M0-26-T-013P, with a single unit required and a delivery deadline of five days from the order date. The item, identified by NSN 4720-99-613-8974 and part number P06887800 from Mactaggart, Scott & Co. Ltd, is designated as a critical application item and must be delivered FOB origin with no tolerance for quantity variance. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, and palletization must follow DLA packaging requirements. The shipment is to be sent via the fastest traceable means to the USS Lyndon B. Johnson at West Bath, Maine, with explicit prohibitions against parcel post delivery. Strict environmental and material restrictions apply: ozone-depleting chemicals and mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, or specified naval instruments, with additional containment requirements for portable mercury-containing devices. Substitute materials require prior approval, and technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size. The contract is issued by the Department of Defense’s Maritime Supply Chain ESOC, with point of contact Abaigael Masterson and a response deadline of July 31, 2026.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FIXEDThe contract specifies the procurement of a fixed film resistor network with the NSN 5905012185402 and part number M8340108K3320FC, manufactured in accordance with MIL-PRF-83401H Sup 1 and MIL-PRF-83401/8E Rev E, both dated May 29, 2024. This is a critical application item requiring strict compliance with国防部 technical and quality requirements referenced from the DLA Master List, and the use of any Class I ozone-depleting substances is strictly prohibited unless explicit written approval from the Contracting Officer is obtained. The item must be packaged per MIL-STD-2073-1E with marking in accordance with MIL-STD-129, including specific lead finish labeling per IPC/JEDEC J-STD-609 to identify Pb or Pb-free attributes on each unit package. ESD and EMI protection is mandatory, requiring MIL-PRF-81705 qualified packaging materials—Type I barrier material for both ESD and EMI protection, with verification that all materials are sourced from manufacturers listed on QPL-81705. The supplier must ensure physical protection of leads and terminals to prevent damage during handling and transport. Delivery is required within five days FOB origin, with no quantity variance allowed, and inspection and acceptance occur at the destination. The item must be shipped via traceable freight methods, not parcel post, to Robins AFB, Georgia, with the original required delivery date set for July 17, 2026.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
LOCK, SECONDARYThe contract pertains to the procurement of one unit of LOCK, SECONDARY with NSN 5930016024015, under solicitation SPE7M0-26-T-013Q, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys. Delivery is required within five days of shipment, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, where the item must comply with MIL-STD-2073-1E packaging standards, including specific preservation, wrapping, and container codes, along with MIL-STD-129 marking requirements and DLA palletization guidelines. The supply must be shipped via traceable means, excluding parcel post, to the designated military warehouse at Fort Hood, Texas, with a required delivery date of July 17, 2026. The item is to be delivered to a specific government receiving point identified by the M/F (TCN) W45NQ761910071 and associated codes, and must be properly marked per government specifications with no special labeling. Pricing is set at one dollar per unit, with the total value reflecting the single quantity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the solicitation.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
REDUCER, PIPEThe contract pertains to the procurement of a pipe reducer with NSN 4730-01-668-0509 and part number 1496-DC, supplied by FAIRVIEW FITTING & MANUFACTURING, with an alternate source identified as TRU-HITCH, INC. under part number 02400. The requirement is for a single unit to be delivered within five days of contract award, FOB origin, and is subject to strict compliance with DLA's packaging standards per MIL-STD-2073-1E and marking requirements as specified in MIL-STD-129, including a special marking code indicating the item is open for inspection or use. The procurement is governed by the DLA Master List of Technical and Quality Requirements incorporated by reference, with prohibitions against the use of Class I ozone-depleting chemicals, overriding any conflicting specification language unless explicitly authorized. No shelf life applies to this item, and substitute chemicals must be pre-approved unless already permitted by the underlying specifications. The delivery is directed to Camp Casey in Dongducheon, South Korea, under a rotational force deployment, with shipment governed by DLAD Procurement Notes C19 and C20 regarding transportation and first destination transfers. The unit of issue is each, with a fixed quantity of one, no variance allowed, and inspection and acceptance occurring at destination. The contract number is SPE7M0-26-T-013H, with a required delivery date of July 17, 2026, and the solicitation was posted on July 20, 2026, closing for responses on July 31, 2026. The NAICS code 326122 identifies this as a plastic product manufacturing activity, and the award is for the U.S. Department of Defense through the Maritime Supply Chain ESOB. Government-use only codes and shipping labels are included for logistics tracking and administrative control.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract is for the procurement of 30 gaskets with part number 43008 and NSN 5330-01-171-1371, under solicitation SPE7M0-26-T-012Y, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of award, with the solicitation posted on July 20, 2026, and responses due by July 31, 2026. All supplied items must comply with DLA packaging requirements and technical/quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. The gasket must be free of asbestos as defined in Fed-Std-313 and must not contain any intentionally added mercury or mercury-containing compounds, except for functional uses in specific applications such as batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary for the mercury, per NAVSEA 5100-003D. The item is to be delivered to Bremerton, WA 98314-5001, and the primary point of contact for the contract is Rocio Mino at DLA.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKERThe contract involves the procurement of three circuit breakers with part number QC2050 and NSN 5925-00-262-5723, supplied by Eaton Corporation under solicitation SPE7M0-26-T-013A. The items must be delivered within five days of contract award, FOB origin, with no variance allowed in quantity, and are subject to destination inspection and acceptance. Packaging must comply with MIL-STD-2073-1E, using packaging code Q at level B, with marking adhering to MIL-STD-129 and no special marking required. The delivery address is the SAGAMI STORAGE FACILITY in Sagamihara, Japan, with the same location designated for marking and freight shipping. The unit of issue is each, with a total contract value of $9.00 for the three units, and the required delivery date is July 17, 2026. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, and hazardous materials handling must follow DLAD Proc Note C19 and C20. The contract is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys, with Audrey Acuna as the primary point of contact, and the solicitation closes on July 31, 2026.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334515
New
DIBBS
VOLTMETERThe contract solicits two voltmeters with NSN 6625-01-624-0283 under solicitation number SPE7M0-26-T-013C, with a delivery requirement of five days after delivery order. The item is being procured by the Department of Defense through the Maritime Supply Chain ESOC Buys office, and performance is designated to FPO with ZIP 96306-1204. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, with revision control tied to the solicitation issue or award date depending on acquisition size. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The solicitation was posted July 20, 2026, with a response deadline of July 31, 2026, and falls under NAICS code 334515 for other measuring and controlling device manufacturing. Primary point of contact is Gerard Quinn, reachable via email and phone provided, and further details are available through the DIBBS system. Government identification must be removed from any non-accepted supplies in accordance with RQ011.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details