Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Government of Canada was posted on July 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Motor, Alternating Current

Closed
W8482-264756/AInternational

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335312
New
Federal
61--MOTOR ASSY, BLOWER, IN REPAIR/MODIFICATION OF
Solicitation # N0010426RYAAG
The U.S. government intends to procure the repair of a motor assembly blower, part number NV822255-1 and NV822255-2, under NSN 7H-6105-015098978, on a sole source basis from Hamilton Sundstrand Corporation, the original equipment manufacturer and only known source for this component. No technical drawings or data are available to the government, and it does not hold proprietary rights to enable procurement from alternative suppliers. This procurement is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302, with the requirement deemed critical for operational readiness as a CASREP emergency acquisition. Delivery is directed to DLA Distribution Norfolk, VA, with 10 units required under a one-year contract period. UID marking and Buy American Act provisions will apply. The procurement will utilize FAR Part 15 procedures and excludes commercial item acquisition policies under FAR Part 12, as market research confirms no commercially available substitute exists. All responses must be submitted electronically via NECO; no hard copies or phone inquiries will be accepted. The solicitation is expected to be issued on 23 JUL 2026 with responses due by 07 AUG 2026 and an anticipated award date of 07 SEP 2026. Interested parties must demonstrate capability by submitting a proposal to Jessica Grzywna by email, and firms not already approved must submit a Source Approval Request independently, without delay to the acquisition timeline. This is not a small business set-aside, and options for future quantity increases may be included.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 13 days

AI Contract Overview

Show more

The solicitation for Motor, Alternating Current under reference number W8482-264756/A has been cancelled and is no longer active. It was originally posted on July 15, 2026, with a response deadline of July 27, 2026, and was issued by the Department of National Defence under the Government of Canada, classified under NAICS code 335312 for Electric Motor, Generator, and Transformer Manufacturing. The place of performance was identified as British Columbia and Nova Scotia, with Apurva Deshpande listed as the primary point of contact via email at apurva.deshpande2@forces.gc.ca. Despite the solicitation’s publication, no contract value was available, and no details regarding supplies, pricing, performance requirements, inspection criteria, packaging, evaluation factors, representations, certifications, or special conditions could be retrieved due to persistent system authentication errors that blocked access to all associated documentation sections, including those under FAR Parts A, B, C, D, E, F, G, H, K, L, and M. As a result, the full scope, terms, and conditions originally intended for this solicitation remain inaccessible, and no award was made.

General Info

Two AC motors, part 433N15-45-75AP4-01D4, to be delivered to CFB Halifax and CFB Esquimalt by July 21, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

(8)

W8482-264756/A RFP Amendment 001 for Motor, Alternating Current

PDFamendment

W8482-264756/A Request for Proposal for Alternating Current Motor

PDFrfp

Amendment 001 to RFP W8482-264756/A Motor, Alternating Current

PDFamendment

W8482-264756/A Annex Statement of Requirement and Offeror Submission Details

XLSXsow

Annex - Offeror Submission Details - W8482-264756A

PDFannex

Annex OSD Fr - Submission Details W8482-264756A

PDFaward

W8482-264756/A Annex Statement of Requirements and Offer Submission Details

XLSXsow

RFP W8482-264756/A Motor, Alternating Current

PDFrfp

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
Contacts
Apurva DeshpandeContracting Authority

Full Description

Show more
This solicitation has been cancelled.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 336411
New
International
Uncrewed Aircraft System - Light
Solicitation # W8703-270009/A
The Department of National Defence is soliciting a General Purpose Uncrewed Aircraft System (GPUAS) for light land forces, with the requirement to deliver a minimum of 80 systems by March 1, 2027, to 7 CF Supply Depot in Edmonton, Alberta. The system must support a broad spectrum of military operations including Intelligence, Surveillance, and Reconnaissance (ISR), force protection, targeting, strike missions, situational awareness, and training. Key technical specifications include a maximum take-off weight of 5 kg or less, an endurance of at least 30 minutes with an electro-optical/infrared payload, a dash speed exceeding 55 km/h, and a service ceiling of at least 8,000 feet ASL, all measured under ISA conditions. The system must comply with Canadian and international standards including ISO 2533:1975, DND and CF airworthiness directives, and must incorporate cybersecurity measures such as secure boot, authenticated software, no external kill switches, no undocumented data exfiltration pathways, and prohibit critical components manufactured in adversary nations, including flight controllers, radios, cameras, and ground control stations. The procurement follows a Phase Bid Compliance Process and is restricted to Canadian Suppliers who meet stringent eligibility criteria, including a permanent place of business in Canada, tax registration, and employment of Canadian personnel. Bidders are required to complete the Canadian Content Attestation Form to quantify Canadian Value-Added, which accounts for 25% of the award evaluation, alongside Technical Merit (50%) and Price-per-Unit (25%). The highest combined score determines award selection, with ties broken by the highest Canadian Value-Added score. All submissions must be in English or French and sent exclusively via email to tanya.mckenzie@forces.gc.ca by August 25, 2026. Bidders must structure proposals into three sections: Technical Offer, Financial Offer, and Offer Submission Forms, including mandated documents such as the Offeror Declaration and Canadian Content Attestation. Delivery must be made Delivered Duty Paid under Incoterms 2020 to the specified Edmonton location, with packaging adhering to environmentally preferred standards, ISPM 15 wood packaging rules, and controlled goods marking requirements. The contract is governed by the Defence Protections Act and includes warranty terms of 12 months post-acceptance, 30-day payment terms after invoice receipt, and potential late payment interest at the average rate plus 3
Aircraft Manufacturing

POSTED

6 days ago

DEADLINE

in 3 days
View Details
NAICS: 335311
New
International
1250 kVA Shore Power Autotransformer for CCG AOPS
Solicitation # RFQ-CCG-AOPS-2026-001
The Department of National Defence, on behalf of the Canadian Coast Guard, is seeking quotes for the design, manufacture, testing, and delivery of one 1250 kVA three-phase autotransformer. The equipment is required to convert 450 VAC primary shore power from Department of National Defence facilities to 600 VAC secondary power for Arctic and Offshore Patrol Ships. The unit must be copper-wound with Class 220 insulation, an impedance of less than 4 percent, and a CSA Type 3R enclosure finished in ANSI 61 grey. A critical requirement is that the transformer must fit within an ISO 668 Type 1C 20-foot freight container and not exceed a maximum weight of 8,000 kg to ensure compatibility with shipboard crane lifting capacities. The selected contractor must maintain an ISO 9001 certified Quality Management System and perform Factory Acceptance Testing at an ISO/IEC 17025 certified facility. Deliverables include the autotransformer and a comprehensive electronic PDF documentation package containing FAT reports, electrical schematics, arrangement drawings, and operation and maintenance manuals. Delivery is required within 14 weeks of contract award to the NC5 Jetty in Halifax, Nova Scotia, under Delivered Duty Paid terms. This request for quote is issued for planning and estimation purposes and does not constitute a formal offer or guarantee of a contract award.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 337215
New
International
Static Shelving System
Solicitation # W0501-27-M040/A
The Department of National Defence is soliciting a firm fixed price contract for the supply, delivery, and installation of a modular static shelving system for the 5th Canadian Division Support Base Gagetown Personnel Support Services in Oromocto, New Brunswick. The required system totals 67.5 feet and consists of six specific sections ranging from 2 to 12 feet. Each section must feature nine open-face levels, two movable dividers per level, retractable work shelves, full perimeter panels, and hinged locking doors with padlock attachment points. All materials must be new and defect-free, with a final delivery and installation deadline of March 31, 2027. The procurement process utilizes a pass/fail technical evaluation based on mandatory criteria M1 through M11, followed by a financial evaluation in Canadian dollars. Delivery is required on a Delivered Duty Paid (DDP) Incoterms 2020 basis to Building J7, Room B234. The contract emphasizes environmental sustainability, requiring reusable, returnable, or recyclable packaging. While there are no specific security clearance requirements, the contractor must maintain accounting records for seven years post-payment and adhere to Canada's Code of Conduct for suppliers. Proposals must be submitted electronically to the contracting authority, Ann Marie MacDonald, by the specified deadline.
Showcase, Partition, Shelving, and Locker Manufacturing

POSTED

7 days ago

DEADLINE

in 5 days
View Details