Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MOTOR-TACHOMETER GENER

Active
SPE7M1-26-T-330QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation from the Maritime Supply Chain under the Department of Defense is for the procurement of 47 units of a motor-tachometer generator, identified by NSN 6105-00-463-4909. The contract is classified as a commercial item acquisition with a delivery requirement of 126 days after the order is placed. Performance is located at Robins Air Force Base. The agreement incorporates specific DLA technical and quality requirements, including strict packaging standards and the protection of covered defense information. A critical environmental restriction prohibits the use of Class I ozone depleting chemicals, requiring the submission of substitute chemicals for approval if necessary. Additionally, any alternate offerors must provide a complete data package for both the approved and alternate parts.

General Info

DoD procurement of 47 motor-tachometer generators for Robins Air Force Base within 126 days.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

(1)

SPE7M1-26-T-330Q.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
JESSE THOMAS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MOTOR-TACHOMETER GENERATOR
MOTOR,TACHOMETER GENERATOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 6105-00-463-4909 Quantity: 47 EA Purchase Request: 7009697067QTY: 47 Delivery: 126 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335312
New
DIBBS
MOTOR, ELEVATION DRIVE
Solicitation # SPE7M1-26-T-331D
This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of one elevation drive motor under part number 6105-01-305-7689. The contract requires delivery within 10 days after receipt of order and specifies performance at Fort Hood. The solicitation period opens on September 9, 2026, with a response deadline of September 21, 2026. Compliance requirements include adherence to DLA packaging standards, CMMC Level 2 self-assessment for cybersecurity, and the protection of covered defense information. The contractor must follow the DLA Master List of Technical and Quality Requirements and ensure the removal of government identification from any non-accepted supplies. Additionally, alternate offerors are required to submit a complete data package for both approved and alternate parts.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-332F
This contract is for the procurement of three magnetic contactors, specifically TE Connectivity Corporation part number A-1077B1, under National Stock Number 6110-01-716-0380. The acquisition is managed by the Department of Defense Maritime Supply Chain and is designated as a critical application item. Delivery is required within 20 days after the order is placed, with a required delivery date of September 2, 2026. The agreement specifies that shipping must be handled via the fastest traceable means to the designated facility at Randolph AFB, Texas, and explicitly prohibits the use of parcel post. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements and technical standards. Inspection and acceptance will take place at the destination, and the delivery terms are set as FOB Origin.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY SUBASSEMB
Solicitation # SPE7L7-26-T-5139
This contract is for the procurement of two power supply subassemblies, identified by part number 401D1107-1 and NSN 6130014404679, manufactured by EMS Development Corp. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility within 293 days. The agreement specifies a zero percent quantity variance and requires inspection and acceptance to take place at the destination. The supplier must adhere to strict quality and packaging standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except in specific functional cases such as batteries or sensors as specified by NAVSEA.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M0-26-T-079E
This contract is for the procurement of one magnetic contactor, identified by NSN 6110123352442 and Kissling Elektrotechnik GmbH part number 26.56.08. The order is issued by the Department of Defense under solicitation number SPE7M0-26-T-079E, with a required delivery date of September 9, 2026. Delivery is expected within five days after the order is placed, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The item is to be delivered to the US Army 0101 CS BN CO A Distribution at Fort Riley, Kansas. Compliance with DLA master lists of technical and quality requirements is mandatory, specifically regarding packaging standards ASTM D3951 and MIL-STD-129, as well as DLA packaging requirements for procurement. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
GENERATOR, DIRECT CURRE
Solicitation # SPE7M1-26-T-311C
Solicitation SPE7M1-26-T-311C is a request for quotations issued by the DLA Land and Maritime Maritime Supply Chain for the procurement of 12 direct current generators, identified by NSN 6115-01-283-4057. The requirement is issued under the First Destination Transportation program with shipping terms set as FOB Origin. Delivery is required within 210 days, with a need ship date of July 29, 2026, and a final required delivery date of July 1, 2027. The designated place of delivery is the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. All palletization must comply with RP001. Inspection and acceptance will occur at the destination per FAR 52.246-2. Offerors must be compliant with NAICS code 335312 and adhere to domestic material restrictions, including the Buy American Act and the Berry Amendment. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with various FAR and DFARS clauses regarding equal opportunity, human trafficking, and cybersecurity safeguarding.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING CURR
Solicitation # SPE7M1-26-T-330X
This contract is for the procurement of three alternating current motors, identified by NSN 6105011420558 and part number 15S00732-0000. The order is issued by the Department of Defense Maritime Supply Chain under solicitation SPE7M1-26-T-330X and is designated as a total small business set-aside. Delivery is required within 20 days after receipt of order, with a required delivery date of September 11, 2026. The agreement specifies that shipping is FOB Origin, with inspection and acceptance also occurring at the origin. The items must be delivered to DZ Ikmal Merkezi Komutanligi in Derince Izmit, Turkey, via the freight forwarder A.J Worldwide Services Inc. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
ARMATURE, MOTOR
Solicitation # SPE7M1-26-T-330S
This contract is for the procurement of 51 motor armatures, identified by NSN 6105005002129 and Meggitt North Hollywood Inc part number 105527. The item is designated as a critical application item. Delivery is required within 42 days after receipt of order, with a need ship date of November 3, 2026, and an original required delivery date of July 1, 2027. The shipment is to be delivered FOB Origin to DLA Distribution San Diego. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Inspection and acceptance will take place at the destination. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific provisions for the removal of government identification from non-accepted supplies and physical item marking.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
PARTS KIT, FIBER OPTIC
Solicitation # SPE7M1-26-T-331Q
This contract is for the procurement of one fiber optic parts kit, identified as a commercial off the shelf item from Kitco Fiber Optics Inc with part number 0801-9950 and NSN 6080017377548. The delivery is required within 20 days of the order, with a required delivery date of September 3, 2026. Shipping is FOB Origin, and the items are to be delivered to the Electric Boat Corporation in North Stonington, Connecticut, using the fastest traceable means. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1. Environmental restrictions are in place, prohibiting the use of class I ozone depleting chemicals and the intentional addition of mercury, except where functionally required by NAVSEA specifications. Technical and quality requirements are governed by the DLA master list, and inspection and acceptance will occur at the destination.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
FAN, CENTRIFUGAL
Solicitation # SPE7M1-26-T-311Z
Solicitation SPE7M1-26-T-311Z is a request for quotations issued by DLA Land and Maritime for the procurement of four centrifugal fans, identified by NSN 4140-01-592-9161 and part number CP1233GD72WLR. This is a total small business set-aside under NAICS code 335312. The required delivery date is September 13, 2027, with a delivery period of 369 days. Shipping is FOB Origin, and the items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will take place at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Special material restrictions apply, including the Buy American Act and the Berry Amendment, and there is a strict prohibition against the intentional addition of mercury or mercury-containing compounds to the hardware. Payment must be processed electronically through the Wide Area WorkFlow system. Offerors must also comply with DFARS 252.204-7012 regarding the safeguarding of covered defense information and cyber incident reporting.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335312
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-330K
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
STARTER, MOTOR
Solicitation # SPE7M1-26-T-331W
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-T-309F
This contract, identified as SPE7M1-26-T-309F, is a solicitation for the procurement of two alternating current motors, specifically part number 15S02371-1000 from Louis Allis LLC. The order is designated as a critical application item with a required delivery date of August 24, 2026, and a delivery timeframe of 20 days. The shipment is destined for the USS Makin Island LHD 8, with delivery and acceptance both set at the destination. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. This is a total small business set-aside under NAICS code 335312, managed by the Department of Defense Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M1-26-U-5836
This contract is for the procurement of 129 electrical plug connectors, identified by NSN 5935-01-111-4545 and part number MS3475W12-10S. The items are classified as critical application items and must adhere to technical specifications MS3475G(4) and MIL-DTL-26482J(2). The contractor is required to provide a notice in each package informing the user that a backshell must be obtained separately to complete the assembly, providing specific NSNs for straight and right-angle styles. The agreement mandates strict compliance with DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed via sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional use of mercury or Class I ozone-depleting substances in the manufacturing process. Delivery is required within 67 days after receipt of order, with the inspection and acceptance point set at the destination.
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M1-26-U-5810
This contract is for the procurement of 60 electrical plug connectors, identified by NSN 5935009844379 and Ted Manufacturing Corp part number PC310B. The order is designated as a critical application item and is set aside for Women-Owned Small Businesses. Delivery is required within 52 days from the order date, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements and technical standards, including MIL-STD-129 for marking and labeling. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions approved by NAVSEA.
Nonferrous Forging

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M1-26-U-5766
This contract is for the procurement of 868 cartridge fuses under solicitation SPE7M1-26-U-5766 for the Department of Defense Maritime Supply Chain. The required part number is F09B250V2A, and no commercial substitutes are acceptable. The items must adhere to MIL-PRF-15160 specifications and are designated as critical application items. Suppliers must provide components from Qualified Products Lists or Qualified Manufacturers Lists and comply with strict prohibitions regarding the use of mercury and class I ozone-depleting substances. The delivery is required within 107 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. The contract incorporates specific technical and quality requirements as defined in the DLA Master List and requires adherence to configuration change management and government identification removal protocols for non-accepted supplies.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 326122
New
DIBBS
CLAMP, REPAIR, PIPE
Solicitation # SPE7M1-26-T-330M
This contract is for the procurement of 12 pipe repair clamps, identified by NSN 4730-01-674-2978 and part number SRCTL03 from The Slate River Corporation. The order is issued by the Department of Defense Maritime Supply Chain under solicitation SPE7M1-26-T-330M as a total small business set-aside. Delivery is required within 14 days of order, with a need ship date of October 6, 2026, and a final delivery destination at DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. It explicitly prohibits the use of class I ozone depleting chemicals in the manufacturing of the items. Inspection and acceptance will take place at the destination, and the shipping terms are established as FOB Origin.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-332D
This solicitation from the Department of Defense Maritime Supply Chain is for the procurement of electrical wire under NSN 6145-01-695-9473. The requirement specifies a quantity of one foot with a delivery timeline of five days after receipt of order. The contract incorporates specific technical and quality requirements via the DLA Master List, including packaging standards and the removal of government identification from non-accepted supplies. A critical aspect of this procurement is the length requirement based on the Advice code. If the code is 2N, 28, or 34, the material must be provided in a single continuous length, as multiple unit packs are prohibited. If the code is 2P or 39, continuous length is required but multiple unit packs are acceptable. In the event of inconsistencies, the Advice code takes precedence over the schedule. Additionally, alternate offerors must provide a complete data package for both the approved and alternate parts.
Saw Blade and Handtool Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333612
New
DIBBS
COUPLING, PLAIN
Solicitation # SPE7M1-26-U-5739
This contract is for the procurement of 44 units of plain couplings, identified by NSN 3010-01-613-1284 and RIX Industries part number A428-1. The order is designated as a critical application item under solicitation SPE7M1-26-U-5739 for the Maritime Supply Chain within the Department of Defense. Delivery is required within 104 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The supplier must adhere to strict technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking guidelines. A significant environmental restriction is in place prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Packaging must comply with MIL-STD-2073-1E and RP001 requirements to ensure proper preservation and palletization.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
COVER, FIBER OPTIC C
Solicitation # SPE7M1-26-U-5502
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of six units of Fiber Optic Cover, identified by NSN/Part Number 6060-01-514-9577. The contract is categorized as a federal solicitation under number SPE7M1-26-U-5502 and is associated with purchase request 1000240427. The solicitation was posted on August 23, 2026, with a formal response deadline established for September 8, 2026. Interested parties can access further details and submit documentation through the official DLA Internet Bid Board System via the provided web link.
Current-Carrying Wiring Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M1-26-U-5902
This contract is a solicitation for the procurement of 46 cartridge fuses, specifically Littelfuse part number CCMR-40A, under NSN 5920014477953. Issued by the Department of Defense Maritime Supply Chain, the requirement is designated as a Total Small Business Set-Aside. The delivery timeline is set for 57 days after the order, with shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. All hazardous materials must be packaged, marked, and shipped in accordance with IP025 standards.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 331318
New
DIBBS
CABLE, POWER, ELECTRICAL
Solicitation # SPE7M1-26-T-316M
Solicitation SPE7M1-26-T-316M, issued by DLA Land and Maritime, is a request for quotes for 2,000 feet of electrical power cable (NSN 6145013121865). This is designated as a critical application item and must be sourced from the Qualified Products List (QPL) or Qualified Manufacturers List (QML). The material must comply with technical standards NEMA WC 27500-2025 and be provided in continuous lengths, packaged at 500 feet per spool. The delivery period is 160 days, with a need ship date of February 16, 2027, and a final required delivery date of March 10, 2027. Shipment is directed to the DLA Distribution Depot Oklahoma at Tinker AFB, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to military specifications, including MIL-DTL-12000 for preservation and packaging, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Offerors must comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and submission of all quotes via the DLA Internet Bid Board System (DIBBS) by September 8, 2026. The procurement allows for a quantity variance of plus or minus 5 percent.
Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334413
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M1-26-U-5877
This contract is a solicitation for the procurement of 557 cartridge fuses, identified as National Stock Number 5920-01-258-5034. The item is classified as a commercial off the shelf product and a critical application item. Approved manufacturers and part numbers include M-H Precision Systems, Institute of Management, Mersen USA EP Corp, Littelfuse Inc, and Cooper Bussmann LLC. The requirement is set aside for Women-Owned Small Businesses under NAICS code 334413 for the Department of Defense Maritime Supply Chain. The agreement specifies a delivery timeframe of 79 days after the order, with shipping handled as FOB Origin and inspection and acceptance occurring at the destination. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases approved by NAVSEA.
Semiconductor and Related Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS