Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Motor Testing and Startup Services

Active

Federal

Response Deadline08/03/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves post-installation testing, commissioning, and startup services for a 100 HP motor to ensure operational performance and electrical integrity are fully verified. The work is scoped specifically to validate that the motor functions as intended following installation, with emphasis on safety, efficiency, and compliance with technical standards. All activities must be completed in accordance with industry best practices and relevant regulatory requirements to confirm the system is ready for full operational use. This subcontract is a Total Small Business Set-Aside under FAR 19.5, classified under NAICS code 541330, and was posted on July 23, 2026, with a response deadline of August 3, 2026. The place of performance is located in Triadelphia, West Virginia, with the contracting entity being the Department of Labor’s Cas Division 4 Procurement office. Only small businesses are eligible to bid, and the work requires specialized expertise in motor systems commissioning to meet the performance criteria outlined in the scope. The contract does not include procurement of equipment, focusing solely on service delivery for verification and startup activities.

General Info

Post-installation testing and commissioning of 100 HP motor in Triadelphia, WV, exclusively for small businesses.

Agency

Department Of Labor → DOL - Cas Division 4 ProcurementView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Triadelphia, WV, 26059, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 09:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Labor → DOL - Cas Division 4 Procurement

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Labor → DOL - Cas Division 4 Procurement

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Post-installation testing, commissioning, and startup of the 100 HP motor to verify operational performance and electrical integrity.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to support a range of major construction projects across its facilities. These services will span the full lifecycle of projects including planning, design, construction, and closeout phases, with a focus on Design Build, Progressive Design Build, and alternative delivery methods. The contractor will be responsible for ensuring that all projects adhere to approved schedules, budgets, and quality standards while coordinating with Port staff and stakeholders to deliver complex infrastructure initiatives efficiently and effectively. The contract will serve as the primary mechanism for securing CM expertise across multiple future projects without specifying individual task orders at this time. The solicitation is classified under NAICS code 541330 for Architectural, Engineering, and Related Services and is managed by the Port’s Construction Management division. Primary point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson. The contract is forecasted for release in July 2026, though no formal solicitation number or set-aside details have been published. Performance will occur at various Port of Seattle locations, and interested firms are encouraged to monitor the official Port portal for official posting and submission guidelines. All contractors must demonstrate proven experience in managing large-scale public construction projects under similar delivery models.

Construction Management

POSTED

about 8 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a continuous 24/7/365 environment. The focus is on identifying and correcting performance deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, reliability, comfort, and longevity while ensuring compliance with safety and regulatory standards. All work will be executed under Service Directives and executed in close coordination with Aviation Facilities and Infrastructure to meet agreed-upon deliverables. The contract is structured as an IDIQ vehicle under NAICS code 541330 and is managed by the Port of Seattle’s Aviation Facilities and Infrastructure division. Point of contact for inquiries and coordination includes Jason Gates as the primary liaison and Jim Farris as the project manager, with all communication and administrative details centered through the Port of Seattle’s official procurement portal. The solicitation was posted in July 2026 and is intended to establish a framework for ongoing support services critical to maintaining the airport’s complex operational systems.

Aviation Facilities & Infrastructure

POSTED

about 8 hours ago

DEADLINE

Mechanical, Electrical, and Plumbing (MEP) EngineeringThe contract seeks qualified firms to design mechanical, electrical, plumbing, and fire protection systems for public buildings under a subcontract arrangement, classified under NAICS code 541330 for architectural and engineering services. The solicitation was posted on July 25, 2026, with a response deadline set for September 7, 2026, and is being managed by the State of Utah, though no specific city or office address is provided. Scope of work includes comprehensive MEP system design for public infrastructure projects, requiring technical expertise in integrated building systems to meet safety, efficiency, and code compliance standards. While no set-aside provisions or point of contact details are listed, interested parties must submit proposals through the designated online portal by the stated deadline.

POSTED

DEADLINE

in about 1 month

Structural Engineering ServicesThe contract titled Structural Engineering Services seeks qualified providers to perform structural analysis and design for buildings and structures, with specific emphasis on foundation systems and seismic evaluations to ensure compliance with safety and resilience standards. Work is expected to involve detailed engineering assessments, modeling, and documentation to support the integrity and durability of constructed facilities under dynamic and environmental loads. The opportunity is categorized as a subcontract and was posted on July 25, 2026, with responses due by September 7, 2026, and is governed under NAICS Code 541330 for architectural and engineering services. All performance obligations are tied to the state of Utah, though no specific city or address is provided, and the contracting entity is identified as the Utah state agency without further organizational subdivision or point of contact details listed.

POSTED

DEADLINE

in about 1 month

BD26-XX Pre-Qualified Design Professional Services Pre-Qualified Vendor ListThe State of Utah Division of Purchasing is seeking statements of qualifications from design professionals to establish a pre-qualified vendor list for architectural and engineering services, under the solicitation number BD26-XX. This open-ended list will remain active for twelve months from the date of approval, after which vendors must resubmit their qualifications for renewal. The State reserves the right to reopen the solicitation at any time, though not more frequently than once every twelve months, to accommodate additional qualified vendors or adjust criteria as needed. The posting date is July 25, 2026, with responses due by September 7, 2026, and all selections will be managed through the state’s procurement platform. Interested firms must submit their credentials to be considered for inclusion, which does not guarantee work but enables eligibility for future project assignments. The point of contact for this solicitation is Brayden Dent, reachable via email at braydend@utah.gov, and all submissions must be made through the official online portal at the provided UI link. The procurement is not subject to any specific set-aside classifications and applies across the State of Utah with no designated city or zip code for performance, meaning services may be required anywhere within the state. Vendors are expected to demonstrate relevant experience, expertise, and capability in design services appropriate for public sector projects. Approval does not constitute a contract or commitment to award work but allows the State to directly engage pre-qualified firms as needs arise, streamlining the selection process for time-sensitive or recurring design projects.

POSTED

DEADLINE

in about 1 month

Quality Assurance and Sampling Inspection ServicesThis contract requires the performance of quality assurance and sampling inspection services under MIL-STD-1916 or ASQ H1331 Table 1, with a strict zero tolerance policy for any non-conformances on critical, major, and minor attributes. The work involves rigorous inspection protocols to ensure every product meets exacting standards without exception, targeting high-stakes components where even minor deviations are unacceptable. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the intent to support small business participation in defense-related quality initiatives. The NAICS code 541330 indicates the primary focus is on scientific and technical consulting services, specifically quality control and inspection activities, and the contracting activity is under the ASC Commodities Division of the Department of Defense. The opportunity was posted on July 25, 2026, with a response deadline of August 8, 2026, providing a two-week window for qualified small businesses to submit proposals. While no specific place of performance or point of contact is detailed in the provided data, the work is tied to a Defense Logistics Agency procurement platform, suggesting inspections will support the broader DOD supply chain. The absence of an office address or zip code implies that the location of performance may be flexible or determined by the nature of the subcontracted materials being inspected, potentially across multiple facilities or contractor sites under the DOD’s control. The requirement underscores the critical importance of precision and compliance in defense-related quality assurance, where failure to meet zero tolerance standards could compromise operational readiness and safety.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply Chain Traceability & Quality Documentation ServicesThe contract requires comprehensive documentation and recordkeeping services to ensure end-to-end supply chain traceability in alignment with DLA quality standards, focusing on full visibility and accountability across all procurement and logistics activities. All work must adhere to the specified compliance framework to support audit readiness and operational integrity, with deliverables designed to validate the provenance and integrity of materials throughout the supply chain. This subcontract falls under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by July 31, 2026. The place of performance and point of contact details are not specified, but performance is expected to support DLA’s broader mission of maintaining rigorous quality control across defense supply networks.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Inspection, Testing, and Quality Assurance ServicesThe contract requires the performance of technical inspection and testing on newly manufactured compressor ducts at both their origin and destination locations to verify full compliance with established engineering and qualification standards. This work is critical to ensuring that each duct meets stringent performance, safety, and reliability criteria before being accepted for use in defense-related systems. The scope is focused on quality assurance through rigorous testing protocols and documentation, with an emphasis on traceability and adherence to technical specifications throughout the supply chain. This is a subcontract under the NAICS code 541330 for engineering services, issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on July 25, 2026, with a response deadline of August 25, 2026. While specific location details for performance are not provided, the work must be conducted at manufacturing sites and final delivery points to cover the full lifecycle of the components. There is no set-aside designation, indicating this opportunity is open to all eligible contractors, and the successful bidder will be responsible for delivering comprehensive inspection reports and test data to confirm regulatory compliance.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

On-Site Security System Testing & Compliance VerificationThe contract titled On-Site Security System Testing & Compliance Verification requires the performance of scheduled functional testing on security alarm components to ensure operational integrity and adherence to federal standards. Tasks include verifying system functionality, documenting test results, and providing support necessary for annual certification. All work must be conducted on-site at the specified location in Salem, with a zip code of 01970, and must meet rigorous compliance benchmarks tied to federal requirements for security systems. The contractor is expected to deliver thorough and accurate records to facilitate regulatory certification. This is a subcontract under NAICS code 541330, posted by the Department of the Interior through its office Ner Services Mabo (43000). The solicitation opened on July 25, 2026, with a deadline for responses set for August 7, 2026, at 2:00 PM. No set-aside classification is designated, and the contract is not associated with a specific point of contact or additional office address beyond the place of performance. All work must be completed in accordance with the stated federal compliance framework and submitted for certification purposes within the contractual obligations.

Ner Services Mabo (43000)

POSTED

DEADLINE

Generator Condition Assessment & ReportingThe contract requires comprehensive assessments of generator systems to ensure operational readiness and compliance, encompassing load bank testing to verify performance under simulated full-demand conditions, emissions evaluations to meet environmental standards, and detailed fuel quality analyses to detect contamination or degradation that could compromise system reliability. All findings and test results must be compiled into formal technical reports and submitted electronically via email, with copies retained for audit purposes to support accountability and regulatory compliance. The work is scoped as a subcontract under NAICS code 541330, which pertains to engineering services, and is issued by the Texas Department of Public Safety with a response deadline of August 14, 2026. The assessment activities are critical for maintaining emergency power infrastructure and must be performed to a high standard of technical accuracy and documentation rigor.

Department of Public Safety

POSTED

DEADLINE

Diagnostic and Troubleshooting Services for Water Treatment EquipmentThe contract awards services to perform up to three diagnostic evaluations aimed at identifying malfunctions within a water treatment system. Each evaluation includes comprehensive testing, root cause analysis, and detailed reporting to ensure accurate identification and documentation of system failures. The work is focused on ensuring operational integrity and compliance with water treatment standards, with all activities to be conducted at a designated location in Fresno. This is a subcontract under the NAICS code 541330, categorized as a professional, scientific, and technical service. The solicitation was posted on July 25, 2026, with responses due by August 11, 2026, at 10:00 PM Pacific Time. The contracting agency is the California Department of Fish & Wildlife, operating under the state of California, and the work is intended to support water infrastructure reliability within the state’s environmental management framework.

California Department of Fish & Wildlife

POSTED

DEADLINE

MEP Engineering ServicesTexas Southern University is seeking qualified subcontractors to provide MEP engineering services for the design and integration of HVAC, electrical, plumbing, and fire alarm systems within renovated study rooms. The project requires seamless coordination across all disciplines to ensure functional, code-compliant, and efficient building systems that support the academic environment. The contract is open for responses until August 18, 2026, with work to be performed on campus at the university’s location. The solicitation falls under NAICS code 541330, classifying it as architectural and engineering services, and is structured as a subcontract opportunity through the Texas SmartBuy procurement portal. Bidders must demonstrate expertise in multi-system integration and experience with institutional facility upgrades, though no specific set-aside provisions apply. All proposals must align with the university’s operational standards and technical requirements for renovated study spaces.

Texas Southern University

POSTED

DEADLINE

More opportunities from Department Of Labor → DOL - Cas Division 4 Procurement

Same awarding agency

Environmental Compliance and ReportingThis contract, titled Environmental Compliance and Reporting, is a small business set-aside subcontract under the SBA Total Small Business Set-Aside program, with a NAICS code of 541620 for Environmental Consulting Services. It requires the contractor to ensure full compliance with all applicable federal and state environmental regulations concerning the handling, storage, and disposal of waste, as well as the preparation and timely submission of all mandated documentation and reports. The work is to be performed in Triadelphia, WV, with a response deadline of August 3, 2026, and the solicitation was posted on July 24, 2026. The contracting entity is the Department of Labor, Cas Division 4 Procurement, and the subcontract is intended to support environmental accountability and regulatory adherence through expert consulting and reporting services.

Environmental Consulting Services

POSTED

DEADLINE

Hazardous Waste Transportation and DisposalThe contract titled Hazardous Waste Transportation and Disposal requires the safe transport and proper disposal of sludge, sediment, and debris generated from cleaning operations, with strict adherence to all applicable environmental regulations. Essential to the fulfillment of this contract is the provision of electronic proof of disposal to ensure full compliance and traceability throughout the waste management process. The work is to be performed at a designated location in Triadelphia, WV, with Zip code 26059, and must be executed by a certified small business as this is a Total Small Business Set-Aside under SBA guidelines and NAICS code 484220, which corresponds to Specialized Freight Trucking. The opportunity is issued as a subcontract by the Department of Labor’s Cas Division 4 Procurement, and responses must be submitted by August 3, 2026, at 4:00 PM Eastern Time. All work must maintain regulatory compliance and documentation integrity, with no tolerance for noncompliance or improper handling of hazardous materials.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

High-Pressure Jetting and Vacuum Truck ServicesThe contract requires high-pressure water jetting and vacuum extraction services to thoroughly clean storm catch basins and underground piping systems, ensuring optimal drainage performance with no sediment remaining within one inch of the bottom. This work is critical to maintaining efficient stormwater flow and preventing blockages that could lead to flooding or infrastructure damage. All cleaning operations must meet stringent standards for completeness and safety, with a focus on restoring full hydraulic capacity of the drainage network. This subcontract is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside authority and is classified under NAICS code 562991 for other waste management services. The opportunity was posted on July 24, 2026, with a response deadline of August 3, 2026, and the work must be performed in Triadelphia, West Virginia, with a zip code of 26059. The contracting entity is the Department of Labor, Cas Division 4 Procurement, and interested parties must submit proposals through the designated SAM. gov portal before the deadline.

Septic Tank and Related Services

POSTED

DEADLINE

A&CC Catch Basin/Underground Piping CleaningThe Department of Labor, through its Office of Acquisition Services on behalf of the Mine Safety and Health Administration, is seeking a contractor to perform storm catch basin and associated underground piping cleaning services as outlined in the attached Performance Work Statement. This requirement is being conducted under a combined solicitation with the full designation of a Total Small Business Set-Aside, meaning only small business concerns may submit proposals in accordance with FAR 19.5. The North American Industry Classification System code for this effort is 562998, which covers other waste management services. The solicitation titled A&CC Catch Basin/Underground Piping Cleaning is identified by number 1605C4-26-Q-00067 and was posted on July 24, 2026, with a firm response deadline of August 3, 2026, at 4:00 PM Eastern Time. The contract will be performed primarily in Triadelphia, West Virginia, with the awarding agency based in Washington, D.C. The contracting office is under the DOL Cas Division 4 Procurement and the point of contact for this opportunity is Oneisha Pickard, reachable via email at Pickard.Oneisha.S@dol.gov, with Alicia M. Jackson serving as the secondary contact. Interested small businesses must submit their proposals through the SAM.gov portal using the provided UI link, ensuring full compliance with the requirements detailed in the Performance Work Statement to be considered for award.

All Other Miscellaneous Waste Management Services

POSTED

DEADLINE

Electrical Materials SupplyThe contract is for the supply of essential electrical components including 500mcm and #12 AWG copper conductors, 4-inch rigid conduit, a disconnect switch, junction boxes, and control wiring materials. The scope is focused on procuring materials necessary for electrical infrastructure installation, with performance required at Triadelphia, zip code 26059. The solicitation is designated as a Total Small Business Set-Aside under SBA guidelines, meaning only small businesses certified under FAR 19.5 are eligible to bid, promoting small business participation. The NAICS code 423610 classifies this as wholesale trade of electrical apparatus and supplies. All responses must be submitted by August 3, 2026, at 9:00 PM, with the opportunity posted on July 23, 2026. This is a subcontracting opportunity under the Department of Labor’s Cas Division 4 Procurement, and interested parties are directed to the official SAM.gov portal for submission and additional details.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Underground Conduit Abandonment and New Conduit InstallationThe contract involves the abandonment of existing underground conduit sections and the installation of new 4-inch rigid conduit to accommodate power and control conductors within an industrial facility located in Triadelphia, West Virginia, with a ZIP code of 26059. This work is classified as a subcontract under a Small Business Set-Aside, specifically designated for total small business participation, and falls under the NAICS code 238210 for electrical contractors and other wiring installation contractors. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, and is managed by the Department of Labor’s CAS Division 4 Procurement office. The project requires careful removal and deactivation of obsolete conduits while ensuring full compliance with safety and operational standards for new conduit placement, which must support reliable power and control systems in an industrial environment.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Disconnect Switch and Control Wiring InstallationThe contract involves the replacement of the motor disconnect switch and installation of control wiring to support an upgraded 100 HP motor system, with work to be performed at Triadelphia, West Virginia, under the NAICS code 238210 for electrical contractors. The procurement is structured as a subcontract with a total small business set-aside, ensuring that only small businesses certified by the SBA are eligible to respond. The opportunity was posted on July 23, 2026, and bids must be submitted by August 3, 2026, at 9:00 PM Eastern Time. The contracting agency is the Department of Labor, specifically its Cas Division 4 Procurement office. There is no listed point of contact, and no place of performance details beyond the city and ZIP code beyond the specified location. The solicitation does not include a solicitation number, and all information is accessible through the provided SAM.gov link.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Electrical Wiring and Conduit ReplacementThe contract entails the complete removal and replacement of electrical wiring and conduit for a 100 HP motor system, including the abandonment of existing underground sections and the installation of new 4-inch rigid conduit with 500mcm and #12 AWG copper conductors. All work must comply with relevant electrical codes and safety standards, ensuring the system’s reliability and long-term performance. The project requires meticulous planning for the safe decommissioning and disposal of old materials, as well as precise coordination for the installation of new conductors and conduit to support the motor’s operational demands. This is a subcontract under a Total Small Business Set-Aside, designated by the NAICS code 238210 for Electrical Contractors and Other Wiring Installation Contractors, and is managed by the Department of Labor’s Cas Division 4 Procurement. The opportunity was posted on July 23, 2026, with a response deadline of August 3, 2026, at 9:00 PM. The place of performance is in Triadelphia, West Virginia, with a ZIP code of 26059. Only small businesses qualifying under the SBA’s size standards are eligible to respond, and all work must be performed at the specified location without exception.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Electrical Wiring and Conduit ReplacementThe U.S. Department of Labor, on behalf of the Mine Safety and Health Administration, is soliciting proposals for electrical wiring and conduit replacement at the A&CC Building 4 in Triadelphia, West Virginia, under solicitation number 1605C4-26-R-00022. This procurement is designated as a Total Small Business Set-Aside, meaning only small businesses qualify to compete, and the award will be made using Lowest Priced Technically Acceptable evaluation procedures, emphasizing cost efficiency alongside minimum technical requirements. The contract performance period is tight, beginning upon award and concluding no later than 45 days after award, requiring prompt execution. Proposals must be submitted by August 3, 2026, and interested parties are encouraged to review the full RFP for detailed submission instructions and evaluation criteria. Site visits are permitted but at the proposer’s own expense, and appointments must be coordinated directly with Ryan Proietto or Alicia Jackson via email. The work is classified under NAICS code 238210 for Electrical Contractors and the award will be made to a single vendor.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Transportation and Logistics for Pickup/Delivery

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Minor Repair and Replacement of Lab Coats

Industrial Launderers

POSTED

DEADLINE

Bi-Weekly Laundry and Cleaning Services

POSTED

DEADLINE